Archivelink - details connection

Hi,
We have automatically uploaded attachments with ArchiveLink to an Case Management object. The attachments can be seen with the generic object services. All works fine.
I would like to have the details of the attachment. In particular i would like to know the mimetype of the attachment. I know there are several ARCHIV_* and ARCHIVEOBJECT* function modules but no one seems to give me the details of the connection.
Any suggestions?
regards,
Bert

Got it.
SCMS_AO_STATUS .

Similar Messages

WCS 4.0 - Error: RMI FATAL ERROR. ERROR DETAIL: Connection Refused

Have observed the following software defect in WCS 4.0:
When clicking on a Mac Address link in a list of client MAC addresses, the following error is displayed: "Error: RMI FATAL ERROR. ERROR DETAIL: Connection Refused". The same error occurs when clicking on the MAC address URL within a list of rogue APs.
Is this a configuration issue or a software defect?
For reference, the WCS/WLC configuration is as follows:
=======================================================
WCS Version 4.0.81.0 Base+Location
Windows 2003 with WCS running as a service.
Multi-processor Xeon, 8 GB of RAM.
Two 4404 WLC controllers v4.0.179.8

This is one to use TRACE level debugging, and a repeated process, to analyse the WCS logs for possible problem
identification.

Detail: Connection to partner timed out after 60s

Hi SAP Guru's
Whenever I am editing and saving portal theme , getting below menteniod error :-
Please help
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Wed Aug 20 22:31:39 2008
Module: icxxthr.c
Line: 2698
Server: webdispatch01_WPD_02
Error Tag: {-}
Detail: Connection to partner timed out after 60s
© 2001-2005, SAP AG

Dear
I think it's best you check the J2EE log files on this issue
In filesystem /usr/sap/<SID>/JC<instance number>/j2ee/cluster/server0/log
Tail the defaulttrace and perform your save on which the timeout occurs.
Check other log files as well in those filesystems or in the work directory for more information concerning the problem.
Kind regards
Tom

Hub 4 detailed connection stats??

Hello
Got my new hub 4 , all plugged in and working .However I can only get basic connection stats such as upload/download speed and time.
Where are detailed stats that I had with my hub 3??
Cheers
Oliver

I read the parts of the linked chat thread regarding disabling the noise/attenuation stats, and the reasoning for leaving it out does not make sense at all. Users are not going to lose sleep over extra technical information in the "Advanced" section - they know it's there for techincal support if they need it.
Heck, you could even completely hide it by not having a clickable link anywhere and only tell people about the HomeHub "special" link on the forums or BT support - then people won't get confused if they click where they shouldn't.
There are plenty of posts on these forums from people with older HomeHubs where they copy their stat page and people on the forum are able to easily identify what is going wrong (noise margin, etc). Easy for everyone! It is now made much more difficult to dig through logs to find this information now, even for a competent user like myself (I'm a software engineer) who isn't a fan of digging through logs if I can help it.
I think this really needs to be reconsidered in future firmware versions because - in my opinion - it is insane to completely disable something like this. It certainly wasted a lot of my time looking for it when I expected it to be there.

Connect third ViewObject to 2 ViewObjects (Master And Detail) via ViewLink

I have three ViewObjects; 1 Master 1 Detail connected with a ViewLink; i have a third Read-Only (SQL Based) ViewObject which can only be resolved by two bind variables. But the 1st bind variable is on the Master and the second is on the Detail. How can I connect the third ViewLInk to the Master and Detail ViewObjects?

I dropped both viewobjects as read-only tables and they both have the rangesize set to -1.
I think I made myself a bit unclear when asking my question. I do not want a "normal" master-detail view in my jsp where you see one masterrow and all the detailrows. I want my page to show all the masterrows with all their corresponding detail rows listed under the master row.
The pseudocode may look like this:
for each row in MasterViewObject loop
<<display data in MasterViewObject>>
for each row in DetailViewObject loop
<<display data in DetailViewObject>>
end inner loop
end outer loop
As you see I have a double loop here. Is somehing like this possible without "manually" doing all the stuff?
Thanx
Tom

Archivelink Integration

Hi,
Can anyone please know the integration between sap archivelink and .net web application.
Pls provide detail information regarding integration and devlopment.
Regards
Laxmi Bhushan

Hi,
We have our application in .net and and we have a document repository in the application. now i want to configure Archivelink and define my content repository as external repository.
so i want all configuartion details for archivelink to connect external repository . like what will doucment area and storage type we have to define.
Pls provide me details configuration for the same.
Thanks
Laxmi Bhushan

Connection Timed Out error while saving messages in Solution Database

Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
Babu

Hi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas

Can't connect PlayBook to *my* WPA2 wifi (D-Link Wireless N Router) - very frustrated

I'm gettting massively frustrated with this and would appreciate any assistance.
OK, so to start I'm a developer and I've managed to use my PlayBook for months, connecting to various WiFi networks without issue... except at home.
I have actually connected to it 100's of times, but the connection is flakey and often it fails to connect because it can't get an IP Address (my router is set to offer up 100's of them by DHCP... ONLY my PlayBook has issues getting one)
I have thus far had no issue connecting the following devices to my router:
Laptops (5 different brands/models),
iPad,
iPod (4 different devices)
Blackberry phones (3 different models)
iPhone (2 different models)
but the PlayBook always seems to have issues...
I've tried connecting using the "sync" WPS feature both by pressing the button on the router, as well as entering a PIN on the router config page - no luck.
I've tried entering the correct password multiple times - no luck... it always fails to get an IP Address.
I've even pre-assigned a dedicated IP Address to the MAC Address of the PlayBook... (all my other devices skip it) yet the PlayBook won't take it.
The router is a D-Link DIR-615 H/W /ver C1, Firmware ver 3.13NA Wireless N.
Its entirely possible that I've goofed something up, and I'm willing to try anything to resolve it - however if anyone else is having similar issues please chime in... and for anyone at RIM with 5min free... a quick "paranoia" once over look at the connecting / IP gathering code in this area would be greatly appreciated... in case there's an odd "off by 1" error of some kind in this area.
Finally, I'm not sure if there is any more info to provide when the PlayBook does fail to get an IP... but if there is an error message or log that us users can look at (or get in an OS update) it would be helpful in trying to diagnose why the connection fails.
Thanks for any advice,
Steve
PlayBook Apps: DataMine, Dots + Boxes, 5 Marbles
BlackBerry SmartPhone Apps: 5 Marbles Soon: **** (D.Z.A), ****Quest, **** Challenge, VaultCracker, DevBrowser, Radial****

I was having the same issue until yesterday.
After spending a couple of nights dealing with BB Support techs, I came up with this steps and worked for me, even though that Playbook should connect automatically as other devices do. Moreover, of course I am not going to ask everyday the IT guys for a modem reset
Here it goes :
1- If you own a lap top/pc connected to your work Wifi network, open the network adapter window on the PC. Go to wifi adapter and left-click on properties in order to display detailed connection status.
2- From there you may obtain a valid subnet mask, Default Gateway, Primary DNS and Secondary DNS.
3- Since the IP Address was already obtained by your Playbook while trying to connect, it will be asking for the same IP each time, so write down the Playbook IP too. You can access it from the wifi? Icon on the wifi configuration script on the playbook.
(The issue here was that for some reason, my Playbook on "auto IP mode" was choosing a different default gateway number than the correct one. I still can't figure why, but I'm not going to invest more time on it, until a new software update becomes available and go from there.)
4- In your playbook tap the wifi icon and go to saved networks, tap on edit (pencil) and delete your office previous connection.
5- Create manually a new wifi connection and unselect "auto IP mode". You will have the opportunity to copy all the information mentioned above. IP, Subnet Mask, Primary DNS. Secondary DNS and Default Gateway.
6- Tap save and connect.
Hopefully you Playbook will be online and ready to navigate.

'500 Connection timed out' Error in Sender SOAP Scenario

Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveen

Hey Praveen,
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING]

500 Connection timed out

Hello,
I receive a 500 Connection timed out error.
I know that there are some threads to this error but I can´t find a solution for us.
This is the error description:
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Mar 04 07:02:38 2008
Module: icxxthr.c
Line: 2698
Server: crmprod_CRP_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Now I have found in this forum some information about the parameters icm/keep_alive_timeout, icm/conn_timeout and icm/server_port_*
Our settings for this parameters are:
icm/server_port_0 = PROT=HTTP,PORT=8001
icm/server_port_1 = PROT=SMTP,PORT=25
icm/keep_alive_timeout (sec.) = 600
icm/conn_timeout (msec.) = 5000
Can someone please explain me which parameters occurs this error and which parameters I can change that the connection time is longer than 60 seconds?
Where can I change the parameters?
Regards
Philipp

Hi,
Parameter icm/conn_timeout
icm/conn_timeout is used to set the timeout when setting up the connection. If the timeout is exceeded, an error page is generally displayed with the information "404 Resource not found" "Partner not reached".
Therefore, exceeding the icm/conn_timeout does not lead to a "500 Connection timed out" error message.
Processing timeout and keepalive timeout
The icm/keep_alive_timeout and icm/server_port_< n > parameters define the keepalive timeout and the processing timeout.
ICM distinguishes between these two types of timeout.
The processing timeout is the timeout between the HTTP request being issued and the HTTP response being received.
If the ICM is used as a server for the relevant HTTP request (in other words, when it forwards an incoming request to the SAP Web Application Server), the processing timeout is the time that the ICM will wait until a response is received from the SAP Web Application Server (ABAP or J2EE). This interval may be exceeded with long-running applications in ABAP or the J2EE engine. If the processing timeouts are exceeded, the ICM sends the client an HTTP response with the error code "500 Connection timed out".
If the ICM serves as a client for the relevant HTTP request (that is, when it forwards outgoing requests from the SAP Web Application Server), the processing timeout is the time that the ICM waits until a response is received from the network. This interval may also be exceeded in the case of long-running applications in the network.
The keepalive timeout specifies how long the network should remain open after a request has been processed successfully so that the TCP/IP connection does not have to be reestablished if additional requests are received.
When you set the keepalive timeout, this does not normally lead to timeout errors. You should set the keepalive timeout high enough that the connection does not have to be reestablished for requests that are sent within a short time of each other, but low enough that the number of unused open TCP/IP connections is not unnecessarily high. Exceeding the Keepalive timeout should never cause an error.
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
For the ICM, the parameters mentioned here are in the instance profile.
The processing timeout is set for individual services with the following parameter:
icm/server_port_ < n > = ...,PROCTIMEOUT=< s >.
The keepalive timeout can be set globally for all services of the ICM with the parameter icm/keepalive_timeout.
You can also set it for individual services by using the following parameter:
icm/server_port_ < n > = ...,TIMEOUT=< s >.
If you set this parameter, it overwrites parameter icm/keepalive_timeout for the specified service.
Even if the ICM serves as client for a request, the TIMEOUT and PROCTIMEOUT parameters of icm/server_port_ < n > control the timeouts for the relevant protocol, provided that you have set TIMEOUT or PROCTIMEOUT.
If you have not set the PROCTIMEOUT parameter, TIMEOUT (or icm/keepalive_timeout) defines both the processing timeout and the keepalive timeout. Also, as of release 6.40, the keepalive timeout is limited to a maximum of 30 seconds.
In a system where the default timeout settings of 30 seconds for the keepalive timeout and the processing timeout are not sufficient because of long-running applications, we recommend that you set the TIMEOUT and PROCTIMEOUT parameters for the relevant services so that you can configure them independently of each other. In addition, we recommend that you do not set the TIMEOUT value higher than necessary, for example, to the usual default value of 30 seconds.
We recommend, for example, the following settings:
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600
to allow a maximum processing time of 10 minutes.
I hope this info will help you to sort out the error you getting.
Regards
Aashish Sinha
PS : reward points if helpful

Can't connect to wireless using certificate with Andorid device

Hi,
I'm trying to connect to my wireless network using an android device with certificate but with no success.
I'm using a WLC 4402 7.0.235.3
SSID Security (WPA2 Auth802.1X + CCKM)
Logs from WLC
(Cisco Controller) debug>*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Association received from mobile on AP 00:3a:98:7d:cc:30
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Clearing Address 10.10.168.3 on mobile
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 10.10.168.3 RUN (20) Skipping TMP rule add
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 apfMsRunStateDec
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 10.10.168.3 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Complete to Mobility-Incomplete
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Reached FAILURE: from line 5154
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Scheduling deletion of Mobile Station: (callerId: 9) in 10 seconds
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [00:3a:98:7d:cc:30]
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying site-specific IPv6 override for station 20:02:af:a6:0a:85 - vapId 3, site 'BPA-SEDE', interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying IPv6 Interface Policy for station 20:02:af:a6:0a:85 - vlan 431, interface id 13, interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying site-specific override for station 20:02:af:a6:0a:85 - vapId 3, site 'BPA-SEDE', interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 STA - rates (8): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 STA - rates (10): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Processing RSN IE type 48, length 20 for mobile 20:02:af:a6:0a:85
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Received RSN IE with 0 PMKIDs from mobile 20:02:af:a6:0a:85
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfMs1xStateDec
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Change state to START (0) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 00:3a:98:7d:cc:30 vapId 3 apVapId 4for this client
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:3a:98:7d:cc:30 vapId 3 apVapId 4
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 20:02:af:a6:0a:85 on AP 00:3a:98:7d:cc:30 from Associated to Associated
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Sending Assoc Response to station on BSSID 00:3a:98:7d:cc:30 (status 0) ApVapId 4 Slot 0
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfProcessAssocReq (apf_80211.c:5272) Changing state for mobile 20:02:af:a6:0a:85 on AP 00:3a:98:7d:cc:30 from Associated to Associated
*pemReceiveTask: Jan 03 08:26:10.873: 20:02:af:a6:0a:85 0.0.0.0 Removed NPU entry.
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Station 20:02:af:a6:0a:85 setting dot1x reauth timeout = 0
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Stopping reauth timeout for 20:02:af:a6:0a:85
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Connecting state
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Sending EAP-Request/Identity to mobile 20:02:af:a6:0a:85 (EAP Id 1)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 Received EAPOL EAPPKT from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 Received Identity Response (count=1) from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 EAP State update from Connecting to Authenticating for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Authenticating state
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.881: 20:02:af:a6:0a:85 Entering Backend Auth Response state for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Processing Access-Challenge for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Entering Backend Auth Req state (id=2) for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Sending EAP Request from AAA to mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.888: 20:02:af:a6:0a:85 Received EAPOL EAPPKT from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.888: 20:02:af:a6:0a:85 Received EAP Response from mobile 20:02:af:a6:0a:85 (EAP Id 2, EAP Type 3)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.889: 20:02:af:a6:0a:85 Entering Backend Auth Response state for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Processing Access-Reject for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Removing PMK cache due to EAP-Failure for mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Sending EAP-Failure to mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Entering Backend Auth Failure state (id=2) for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Setting quiet timer for 5 seconds for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Unknown state
*osapiBsnTimer: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 802.1x 'quiteWhile' Timer expired for station 20:02:af:a6:0a:85 and for message = M0
*dot1xMsgTask: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 quiet timer completed for mobile 20:02:af:a6:0a:85
*dot1xMsgTask: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Connecting state
*dot1xMsgTask: Jan 03 08:26:15.741: 20:02:af:a6:0a:85 Sending EAP-Request/Identity to mobile 20:02:af:a6:0a:85 (EAP Id 4)

Hi Scott,
I've made the change as you suggested and collected logs from MS NPS and I think that Authentication is failing
Authentication Details:
Connection Request Policy Name:          Use Windows authentication for all users
Network Policy Name:                    Wireless
Authentication Provider:                    Windows
Authentication Server:                    NPSServer.domain.local
Authentication Type:                    EAP
EAP Type:                              -
Account Session Identifier:                    -
Logging Results:                              Accounting information was written to the local log file.
Reason Code:                              22
Reason:                                        The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
Best regards,
Alcides Miguel

Rcv'ng message: This web site does not supply ownership information. Connection not encypted. Q: What setting can I change in Firefox to allow access?

Website: g01cdwascl002.ahe.pok.ibm.com
Owner: This web site does not supply ownership information.
Verified by: Not specified
Technical Details:
Connection not encrypted

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

How to Connect LS CAN (USB-8472) to Single-Wire CAN device?

In the post of http://forums.ni.com/ni/board/message?board.id=30&message.id=216&requireLogin=False , NI Engineer said that
“It is possible to use our Low-Speed CAN boards in
a single-wire mode. However, the board will give CAN warnings. So, the
control program may have to ignore certain CAN warnings.
Randy Solomonson
Application Engineer
National Instruments”
But I can't see the detail connection and software settings in that post.
How can I use LS CAN to communicate with single-wire CAN (such as GMLAN)? Should I make some additional settings in my LabVIEW program?
帖子被hmqi2002在 07-09-2009 04:07 AM
时编辑过了

In the post of http://forums.ni.com/ni/board/message?board.id=30&message.id=216&requireLogin=False , NI Engineer said that
“It is possible to use our Low-Speed CAN boards in
a single-wire mode. However, the board will give CAN warnings. So, the
control program may have to ignore certain CAN warnings.
Randy Solomonson
Application Engineer
National Instruments”
But I can't see the detail connection and software settings in that post.
How can I use LS CAN to communicate with single-wire CAN (such as GMLAN)? Should I make some additional settings in my LabVIEW program?
帖子被hmqi2002在 07-09-2009 04:07 AM
时编辑过了

500 CONNECTION TIMEOUT ERROR

Hi Experts,
When try to test the url for c project I am getting this error.
Is there any way to change the connection time out.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Apr 29 14:19:08 2008
Module: icxxthr.c
Line: 2698
Server: m576_IDS_00
Error Tag: {-}
Detail: Connection to partner timed out after 60s
please guide me step step procedure I am functional consultant .
I found that it will be change in T CODE :RZ10
BUT IN THAT what parameter I NEED TO CHANGE PLEASE GUIDE ME
full points will be reward for help help full answer.
thanks
sunil jawalkar

Hi Sunil,
If you are using this particular cProjects URL for the first time, you should generate the screens using SGEN transaction. Select Web Dynpro for ABAP and give the cProjects application.
Having done SGEN, the page wouldnt take long to open up.
To increase the connection timeout, pl contact your basis guy.
Regards,
Reema.
Edited by: Reema Shahbazkar on Apr 29, 2008 6:05 PM

Connection to partner timed out after 60s

Hi,
I have a scenario HTTP to RFC. Where the user posts the data using the URL I have provided to get the response back from SAP system.
Everything is working fine. But today we had a strange problem. When the user tries to post the data to integration server he is getting the response as below,
SAP Web Application Server
==========================
500 Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Mon Oct 22 05:01:00 2007
Module: icxxthr_mt.c
Line: 2603
Server: ABCD_XWD_11
Detail: Connection to partner timed out after 60s
But after some time its working fine (without doing anything) without any problem. I am searching for the root cause of this problem. Any ideas on this?
Please help me out in this.
Thanks in advance,
Prasad Babu.

The target system might be too busy to accept any new requests and that the reason it gave the error message.
VJ

Archivelink - details connection

Similar Messages

Maybe you are looking for