Archivelink - How configure a printer ?

Hello,
to use archivelink, need to configurate new printer or is possible to use de default printer ?
I read that archivelink use a printer like a new unit logic, but how mean it ?
tks,
Roberto.

need to declare a ARCH printer on spad

Similar Messages

  • How do I print a configuration page from a Mac with Snowleopard?

    How do  I print a configuration page from a Mac with Snowleopard?  Printer is workinhg fine, but I just put in a new cartridge and I'd like to know how many pages I'm printing.
    Dave

    Hi there Dave, aka @dewanio , welcome back
    I saw that you are looking to print off a configuration page.
    The printer itself will print a test page however, the model depends on how it will print. Let me know which printer you have and I will get back to you!
    Thanks!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can i print a network configuration page , i need the IP on a ph1510

    how can i print a network configuration page , i need the IP on a ph1510

    Hi,
    What is the exact printer model?
    If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

  • How to configure automatic printing of picklist for an OBD?

    Hi Experts,
    Can you pleae let me know how to configure automatic printing of picklist for an OBD?
    Thanks,
    Shetty

    1. To see whether picking list (EK00) is generated:
    VL02n open the delivery -> menu bar -> extrax -> picking output . 
    Is EK00 there? If not, it means that EK00 is not generated for this delivery.
    If EK00 is green -> it means that it has been printed.
    If it's yellow -> it means that it hasn't been printed yet. Now you have to goto VL70 to print it.
    2. To generate a picking output for one delivery, you have to do:
    [1] In customizing of shipping point, (img -> enterprise structure -> defination -> logistics execution ->shipping point), you have to set picking output  (TVST-KSCHL).
    [2] Item is relevant for picking, and plant/storage location is not assigned to a warehouse.
    [3] Set default print parameter in customizing.  (IMG -> Logistics Execution -> Shipping -> basic function -> output control ->define print parameter -> V4 -> for you picking output type -> assign default print parameter to shipping point ).
    Edited by: Harry Wu on Jul 23, 2010 3:07 AM

  • How do I Configure Desktop Printer to scale to fit?

    I love the feature of drag and drop printing and I often need to print many pdfs. However when I drag pdfs to the desktop printer icon it prints them on letter sized paper without scaling them to fit. I have configured the printer in the setup utility to print on tabloid but it still prints on letter with no scaling. How can I configure the desktop printer to scale to fit and select paper size? booya

    Hi Daniel, and a warm welcome to the forums!
    Doesn't your printer have a setting for the default size in it rather than just on the Mac?
    What size are these in the first place?
    I think the secret is to save the Tabloid size as a Default, but I don't have a Tabloid to test with, so I used Preview, (which you may end up having to use to drop on or Script to, dunno yet).
    I made a new Page size of Tabloid...
    Then saved as default...
    You'll have to test this... not even sure it works to Scale to Size, but at least you could drop them on Preview then +p to see.

  • How do I print a configuration page to find the printer code for my laserjet printer to eprint?

    How do I print the configuration page to find the printer code for my laserjet p1102W?

    Guide here:
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to Sent Printer Configurations while Printing in SMARTFORMS for PO?

    Hi,
      I took PO Print Out on LIPI Dot Matrix Printer before 10 days. At that time our Basis Consultant kept Some Configurations for that Printer. After some one changed the Configuration Settings of that Printer. Now we took a print but it is printing differently.
    Is it possible to send printer Configurations while calling PO smartforms in my driver Program so that while taking PO Print Out my Print Out Specific Configurations will set automatically if antbody can change the printer Configurations.
    can anyone suggest how to pass printer configuration through smartform or driver program .

    Thank u

  • How can I configure a printer which is connected to a Windows PC

    How can I configure a printer which is connected to a Windows PC.
    I have a I-Mac with OSX lion ver 10.7.2 installed.
    The printer is a Canon IP4200.

    The first thing you need to ensure is that the printer is being shared by Windows. Hopefully you know how to do that but if not, reply with the version of Windows you are using.
    With the printer shared by Windows you then add the printer on the iMac by opening Print & Scan and clicking the plus button under the Printers list. With the Add Printer browser displayed you can select the Windows icon. A window appears showing three columns. The first column is for the workgroup name. You may already see a names here such as Workgroup or MSHome. Selecting the workgroup the Windows computer is using will then show the computer name. And selecting the computer name will show the shared printer, although you may need to enter your Windows user name and password to see this printer share. Select this printer share name will then let you select the printer driver to be used on the Mac. Note that you will not be able to use Canon's driver for this, as it is not designed to work with a shared printer from Windows. Instead you will need to download and install Gutenprint. This will provide you with another iP4200 printer in the Print Using menu and this version will let you print via the Windows share.
    If you don't see the workgroups on your local network or the computer name, or something else does not function as described above then please reply with details of what is not happening.

  • How to configure this printer SLIP 80 - S

    Hi All,
    can any one please tell me step-by-step process to configure this printer SLIP 80 - S in ECC6
    If you need any more info plz let me know
    That would be a great help
    Regards,
    Leonardo

    Hi,
    Please see below link and go through it.
    http://help.sap.com/saphelp_nw70/helpdata/EN/d9/4a933c51ea11d189570000e829fbbd/content.htm
    Regards,
    Anil

  • How to save print setup for pdf file so that every user can open and print w/o manually performing?

    Can is there a way to configure the print settings (i.e. paper size, orientation, etc.) and save this setting as part of the pdf file? I would like the users of pdf files to be able to open the file and simply print, without having to manually configure the print settings.

    Not sure if this will help. I got this information from the built-in help under Acrobat 9.
    Advanced
    Lists PDF settings, print dialog presets, and reading options for the document.In the PDF settings for Acrobat, you can set a base Uniform Resource Locator (URL) for web links in the document. Specifying a base URL makes it easy for you to manage web links to other websites. If the URL to the other site changes, you can simply edit the base URL and not have to edit each individual web link that refers to that site. The base URL is not used if a link contains a complete URL address.
    You can also associate a catalog index file (PDX) with the PDF. When the PDF is searched with the Search PDF window, all of the PDFs that are indexed by the specified PDX file are also searched.
    You can include prepress information, such as trapping, for the document. You can define print presets for a document, which prepopulate the Print dialog box with document-specific values. You can also set reading options that determine how the PDF is read by a screen reader or other assistive device.
    Create print presets
    A PDF can contain a set of print presets, a group of document-specific values that is used to set basic print options. By creating a print preset for a document, you can avoid manually setting certain options in the Print dialog box each time you print the document. It’s best to define print settings for a PDF at the time that you create it, but print presets provide a means to add basic print settings to a PDF at any time.
    Choose File > Properties, and click the Advanced tab.
    In the Print Dialog Presets section, set options and click OK.
    The next time you open the Print dialog box, the values will be set to the print preset values. These settings are also used when you print individual documents in a PDF Portfolio.
    Note: To retain a print preset for a PDF, you must save the PDF after creating the print preset.
    Print Dialog Presets
    Page Scaling
    Prepopulates the Page Scaling option in the Print dialog box with the option you choose:
    Default
    Uses the application default setting, which is Shrink To Printable Area.
    None
    Prevents automatic scaling to fit the printable area. This setting is useful for preserving the scale of page content in engineering documents, or for ensuring that documents print at a particular point size to be legal.
    DuplexMode
    For best results, the selected printer should support duplex printing if you select a duplex option.
    Simplex
    Prints on one side of the paper.
    Duplex Flip Long Edge
    Prints on both sides of the paper; the paper flips along the long edge.
    Duplex Flip Short Edge
    Prints on both sides of the paper; the paper flips along the short edge.
    Paper Source By Page Size
    Selects the option by the same name in the Print dialog box. Uses the PDF page size to determine the output tray rather than the page setup option. This option is useful for printing PDFs that contain multiple page sizes on printers that have different-sized output trays.
    Print Page Range
    Prepopulates the Pages box in the Print Range section of the Print dialog box with the page ranges you enter here. This setting is useful in a workflow where documents include both instruction pages and legal pages. For example, if pages 1–2 represent instructions for filling out a form, and pages 3–5 represent the form, you can set up your print job to print multiple copies of only the form.
    Number Of Copies
    Prepopulates the Copies box in the Print dialog box. Choose a number from 2 to 5, or choose Default to use the application default, which is one copy. This limitation prevents multiple unwanted copies from being printed.
    Thanks.

  • How can I print with a wider left margin in Preview? (OSX 10.5)

    How can I print with a wider left margin in Preview? (OSX 10.5)
    To punch Binder Holes.
    Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
    Info so far:
    Found an older post from 2002 ... "Make a custom page"
    Mac Help has a limited, simple, incomplete answer: "Make a custom page"
    Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
    Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
    There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
    Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
    Printing a PDF from Preview
    MacBook Pro
    OSX 10.5.6
    Thanks
    Peter

    Thanks ... tried the Paper Handling, but no lock.
    Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
    Th only "work around" solution is to ...
    Rotate the PDF page 180, then scale slightly (90% or so ...)
    This pushes the upside down page, down and to the left.
    While this is the opposite of what is desired, the print is then correct when
    it is punched and placed into a three ring binder.
    Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
    ie: In Preview, Custom Page does not work correctly,
    Thanks allfor the comments and help ...

  • HP 3050 how can I print out the printercod​e / e-mailadre​ss of the printer??

    HP 3050 XP/7
    For using the ePrintserviceI have to fill in the printercode / e-mailadress of the printer. How can I print out these informations. I already printetd out the Net configuration page (Netzwerkkonfigurationsseite) and the printerstatus (Druckerstatusbericht). I can find URL, Hostname but not printercode / e-mailadress.
    I´m not sure if I enabled the webservice of the printer.How can I check this setting and how can I enable webservice.
    Posts in German language would be great, but english is ok as well.
    THX very much!!

    Hello oli-b,
    The DeskJet 3050 does not have the Web Services feature which allows ePrint and the email address of the printer. The printer you would need is the DeskJet 3050A which includes these features.
    If this is what you have then you would need to connect your printer to the wireless network using the setup CD software that was included with the printer. Once you have successfully connected to the wireless network, there should be an ePrint button on the printer that allows you to access the Web Services menu and enable this feature and give your printer an email address for ePrint.
    Hope this helps.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • How Can I Print from my Microsoft Surface Running Windows 8 RT?

    How Can I Print from my Microsoft Surface Running Windows 8 RT?
    Most new wireless printers won’t have a problem printing from the Microsoft Surface with Windows 8 RT.  All you should have to do for these printers is tell them to print and they will.  Older wireless, Ethernet, and USB printers might not have an officially supported driver in Windows 8 RT, but there is a way to get the printers working.  There are different requirements depending on how the printer is being connected to the Surface. 
    Note:  All steps below are only for PhotoSmart, OfficeJet, DeskJet, and other HP Inkjet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all Inkjet printers.  If these steps don’t work, try different drivers from the list until you find one that will work (you’ll understand what I mean once you follow the steps below).  If none of the drivers work, your printer will not work with the Surface.
    For networked printers (wireless or Ethernet), all you need is either the Surface keyboard, or an external USB keyboard to connect to the Surface.  This just makes anything you have to type easier to type.  You will also need to have the Surface and the printer connected to the same network. 
    Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
    Touch Search.
    Below the Search Box, touch Settings.
    In the search Box, type Devices and Printers.
    Touch Devices and Printers.
    Touch Add a Printer.
    Touch “My printer is not listed”.
    Select the TCP/IP option and touch Next.
    Enter the printer’s IP address and touch Next.  Note:  You can get this from the printer’s Network Configuration Page, or from your router’s DHCP list.
    The Surface will locate the printer and try to install it.  The install will fail and the Surface will ask you what you want to do, search the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
    Touch “I want to choose from a list of drivers”.
    If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
    Choose HP from the Manufacture list.
    Choose DeskJet PCL 3 Class Driver from the Drivers list.  If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver.  (Thank you JonW for letting me know about these other alternates. )
    Touch Next.
    Touch Finish.
    Test printing.
    For USB connected printers, you will need a USB cord to attach the printer to the computer.
    Connect the printer to the computer via USB.
    Windows will try to find the drivers but will not be able to.
    Here Windows may ask you if you want to choose the driver to install.  If it does skip to step 14 below.
    Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
    Touch Search.
    Under the Search box, touch Settings.
    In the Search box, type Device Manager.
    Touch Device Manager.
    Touch View and select Show Hidden.
    Search for the printer in the Device Manager.  It should be under Other Devices with a yellow caution sign beside it.
    Select the printer from the list.
    Touch Action.
    Touch Update Driver, or Install whichever one it displays.
    The Surface will ask you what you want to do, search the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
    Touch “I want to choose from a list of drivers”.
    If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
    Choose HP from the Manufacture list.
    Choose DeskJet PCL 3 Class Driver from the Drivers list.  If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver.  (Thank you JonW for letting me know about these other alternates. )
    Touch Next.
    Touch Finish.
    Test printing.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    Hope this helps.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to connect printer

    I have Ipda2, bought a Hp 5510 photo printer. Its up and running and connected, but i am unable to print email. I hit arrow button up top of page, it states "no airprinter" how do i correct? Thanks

    Shannon-
    Is that printer the HP 5510 model B111a?  That is the AirPrint version listed by Apple at <http://support.apple.com/kb/ht4356>.
    First be sure you have the latest firmware on the printer.  You should be able to check for updates from the printer's control panel in one of the setup or preferences menus.
    It is possible your WiFi router does not correctly handle the Bonjour data required by AirPrint.  If that is the problem, check with the router's manufacturer to see if there is a firmware update available, or if there is a change to the router's setup that will fix the problem.
    If you can configure the printer's WiFi to host an Ad Hoc network, you can connect the iPad directly to the printer's WiFi.  If that enables printing, it verifies that the WiFi router is your problem.
    Fred

Maybe you are looking for