Archivelink Toolbox

Dear All,
We are in ECC 6.
We have implemented SAP content Server and Archivelink to attach some documents to BUS2012.
All work properly but I would like to change the display of the attachment list : from ME23N transaction, click on attachment button and choose attachment list. The list of documents stored in SAP content server are displayed.
In the title, SAP put the description of the document type in OAC2 transaction.
and no creator name.
But I would like to change the title with the source file name, to display the creator name and eventually other informations.
Do you know how to customize this attachement list (via BADI or BOR) ??
Thanks for your help.
Véronique

Philos,
I had this issue myself a couple of months ago.
I wrote up a KB article on this - kudos to streufert for his expertise!
Please try the steps in that article and confirm whether it resolves your troubles!
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

LaserJet 1536dnf's ToolBox FX no longer views faxes received to Windows 8.1 (64-bit) laptop

My 1536dnf was previously receiving faxes to my Toshiba laptop. A message box would appear on screen informing me when faxes were received. I used to be able to open the HP ToolBoxFX where a list of faxes received would appear in the received faxes log screen - AND A CLICK ON "VIEW" LINK would be displayed; I'd click on "VIEW" and the fax would apear as a PDF doc.
HOWEVER, for some reason the VIEW link no longer appears in the received faxes log; there is nothing to click on to view the fax, and hence I CANNOT VIEW RECEIVED FAXES anymore.
In the received faxes log screen it still displaces the date/time, number of pages, and from whom the fax is received, I am just not able to view the (apparently) received fax. If I knew what folder on my PC the faxes were stored I would go there to pull up the PDF docs, but I cannot find where this data is stored.
I've also noticed thatI have April 2014 firmware and the latest firmware update is dated August 2014, but after multiple attempts the latest firmware update will not install. It downloads, appears to install, but the config report indicates the newest firmware is NOT installed.
The LJ 1536dnf remains in my local network via eathernet cable, and the printer and scanner components of the MFP function normally. The fax component manually sends faxes and can receive and print faxes in hard copy form.
**PLEASE SOMEONE HELP** Thank you in advance.

Hi @SimonSpeak ,
I see that you are having issues opening the faxes from the Toolbox. I will be happy to help you.
Restart the computer.
Temporarily turn off the Antivirus Software, just to rule out any interference.
Try opening the Toolbox Software again.
Make sure Adobe Flash is up to date. I believe it piggy banks the HP Toolbox Software.
You can always restore your computer back to a earlier time when everything was working properly. It might have been a update that caused this issue, since uninstalling and reinstalling the software isn't allowing the software to work either. How to refresh, reset, or restore your PC on Windows 8.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Try updating the printer's firmware by a USB connection. HP LaserJet Firmware Update Utility.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

USB 6009 DAQ to use in Simulink at External mode with DAQ toolbox

hi
Currently I am using usb 6009 daq board for data acquisition in using simulink. I have created a model with taking analog input from data acquisition toolbox. Then when i want to run in external mode and try to connet to target, the following error is coming up:
Could not execute target data map file 'untitled_rtwin_win32\untitled_targ_data_map' or it does not exist. Stop the target, delete the untitled executable, rebuild the code,and try again. Note that execution of external mode requires the build directory to be present...
How can I solve this problem? For your info, I am using 32-bit matlab, version: 2012a
For your info, a snapshot of the error is attached,
Any help would be appreciated Thanks
Attachments:
Untitled.jpg ‏130 KB

Hi Mahmudur,
what does MathWorks say about this error message?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Early Archivelink for vendor invoices

Dear All,
I want to use Early Archivelink for vendor invoices scenario.
I am attaching the scanned document through OAWD by Storing by subsequent entry and i am able to see the work flow item in my in box but i am not able to execute the transaction from here(MIR7).I am using business object BUS2081,method create and task TS30001128.
Please advice how to execute the work flow item from my in box and create the invoice document.
Regards,
Muzamil

Hi,
After maintaining the TS 30001128 as a general task i am able to execute the transaction from my inbox.
Regards,
Muzamil

Performance with MySQL and Database connectivity toolbox

Hi!
I'm having quite some problems with the performance of MySQL and Database connectivity toolbox. However, I'm very happy with the ease of using database connectivity toolbox. The background is:
I have 61 variables (ints and floats) which I would like to save in the MySQL-database. This is no problem, however, the loop time increases from 8ms to 50ms when using the database. I have concluded that it has to do with the DB Tools Insert Data.vi and I think that I have some kind of performance issue with this VI. The CPU never reach more the 15% of its maximum performance. I use a default setup and connect through ODBC.
My questions are:
1. I would like to save 61 variables each 8-10ms, is this impossible using this solution?
2. Is there any way of increasing the performance of the DB Tools Insert Data.vi or use any other VI?
3. Is there any way of adjusting the MySQL setup to achieve better performance?
Thank you very much for your time.
Regards,
Mattias

First of all, thank you very much for your time. All of you have been really good support to me.
>> Is your database on a different computer? Does your loop execute 61 times?
Database is on the same computer as the MySQL server.
The loop saves 61 values at once to the database, in one SQL-statement.
I have now added the front panel and block diagram for my test-VI. I have implemented the queue system and separate loops for producer and consumer. However, since the queue is building up faster then the consumer loop consumes values, the queue is building up quite fast and the disc starts working.
The test database table that I add data to is created by a simple:
create table test(aa int, bb char(15));
...I'm sure that this can be improved in some way.
I always open and close the connection to the database "outside the loop". However, it still takes some 40-50 ms to save the data to the database table - so, unfortunatly no progress to far. I currently just want to save the data.
Any more advise will be gratefully accepted.
Regards,
Mattias
Message Edited by mattias@hv on 10-23-2007 07:50 AM
Attachments:
front panel 2.JPG ‏101 KB
block diagram.JPG ‏135 KB

Excel VBA - ActiveX Control - MonthView not available under ActiveX Toolbox for Windows 8 64bit MS Office 2010

Hello,
I have Windows 8, 64bit and Office 2010
I am trying to get the 'datepicker' (MonthView) ActiveX control toolbox in Excel 2010 as part of a Excel UserForm I have created. I have spent all day trying to find a solution for my problem.
I opened up the 'more.. ' but the MonthView/datepicker/calendar control is not listed.
I referred to some articles and confirmed that I do indeed have the mscomct2.ocx file in the C:\Windows\syswow64 folder.
I followed the instructions as above, opening up the Administrator Command Prompt and changed the directory to C:\Windows\syswow64 and typed in RegSvr32.
I received a popup screen confirming my registration was successful
Excel was closed. So I opened Excel and checked out the ActiveX Tool box and clicked on the 'More Controls', but there was no listing for the Microsoft MonthView control, (nor datepicker/calendar)
I then downloaded the latest Windows Common Controls 2 6.0 from the following site
http://support.microsoft.com/kb/297381
Copied the original file (2008) and saved it elsewhere on the computer for safekeeping.
Extracted the new mscomct2.ocx.
Under the C:\Windows\syswow64 I changed the original file properties to allow me to overwrite it with the new file. This worked … old file replaced.
I then registered the new file via the Administrator Command Prompt (as above) and was notified that it was successful. I rebooted pc and went back into Excel to find the MonthView in the
ActiveX toolbox, More Controls… and it still wasn’t there …
I would be very grateful if someone could advise how I can get this control and allow me to use it.
If I have left out any information that you need to resolve this issue, please advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi George,
Thank you for checking this out ... :)
I am using Office 2010 64 bit ...
I found the
mscomct2.ocx file originally within the C:\Windows\syswow64 directory (this was an original file .... which I expect was installed via Microsoft at the time of the Office installation.
As I mentioned above, I followed
the instructions (same as the ones you suggested), but still no go, even though it stated that the registration was successful ! :(
Why weren't these features included in the 64 bit ? ... yes, I read the article ... but ... so MS doesn't think that people/developers would be needing this in due course? I installed the 64bit version because I'm running the Win8 64bit version ...and
I deal with a lot of large spreadsheets and can't afford to sleep whilst they decide to load.
If MS included all the other ActiveX controls and some obscure ones, surely some bright spark could have thought that something as useful as MonthView should be included as 'basic' necessity when dealing with forms and sheets?
Perhaps you could pass the suggestion up the line .... there are a lot of other people out there having the same problem ... I found heaps when I was looking for a solution.
Sorry, I'm not having a go at you, but just incredibly frustrated .... the amount of lost productivity directly cause by trying to find a solution that doesn't exist ... it's been at least a good solid 24 hours.
But thank you for taking the time to review my post and your suggestion. It's unfortunate that because you are part of the organisation ... you tend to cop some slack from frustrated people like myself.
In relation to the pictures/screen dumps, 2 of them made it (I can see them in my post) ... one I deliberately left out because there was nothing on there that showed anything other than the rest of the 'More Controls' - nothing to do with the MonthView.
Please feel free to escalate this to the powers that be ... and hopefully enough people will join the voice so a change can be made (I can dream ... can't I?)
I've taken a screen dump of the Forms/ActiveX toolbox.
I don't know what the next step is ... I guess you'd be able to advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system (**bleep**)?

I have a 3 week old W510, Windows 7 64-bit, i7 Thinkpad. Over the Chritmas holidays I was able to start exploring the software that came loaded on the machine. One of these was the ThinkVantage Toolbox which I accessed at least 2 or 3 times to explore the programs and what they had to offer. It worked fine and I was able to view the different offerings inside the toolbox.
Two days ago I used the Lenovo ThinkVantage Tools "Update and Drivers" to find updates to the the machine. It found some updates (I'm not sure of each and everyone but they seemed reasonable) and downloaded them all to bring the system up-to-date.
Today I tried to access the Toolbox and was greeted with a License Authentication Failed message box with this message:
"This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system".
I assume it was something in the recent updates that did this. I have only installed a couple other photo editing pieces of software since then that I doubt would have any effect on this.
I certainly can do a system restore back to before I did the updates, but I'd rather not since a) the updates for the most part appeared to be needed and were successful, b) I'd rather not have to update those things that have auto-updated (like Norton and Super Anti-Spyware definitions), and c) I'm not sure restoring will help, not to mention re-installing the other pieces of software that successfully installed.
I have been a good doo-bee poster and searched this forum and other web resources and while there is reference made to some solutions for this, I didn't fully understand them so I figured I would ask here for help before trying anything. I do have Lenovo phone support but trying here before calling them.
Thoughts anyone? Should I simply download the latest ThinkVantage Toolbox software and install it? If so, should I uninstall the version I have now?
Looking for any assistance anyone could render.
Thank you.
Jim
Solved!
Go to Solution.

Hi again Jim,
First of all you're welcome!
I have another suggestion for you, it might successfully help you in updating Toolbox to the current version, but for this I'd suggest that you first create a restore point just in case the advice fails. Once created a restore point, launch ThinkVantage Toolbox, give it a minute to completely load/run quick tests etc, thereafter click the green colored question mark -> check for updates, once it finds the latest version, let it download and install, I'm hopeful you won't run into any issues via this approach.
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Compilation errors in default toolbox application in jdev 10g

jdev version: 10.1.3.3
OA Framework version (as per the instance): 12.1.3
First of all I could not find OA Framework Dev Guide for 12.1.3. So I am referring to OAF 12.1.2 dev guide. Please let me know if this is ok. If not, please let me know where I can refer OAF 12.1.3 dev guide.
Now, I am Setting up my development environment on windows as per the OAF dev guide. I completed tasks 1 to 6 as instructed in the guide.
In final task 7 "Test your setup", when I rebuild the application, I am getting 2 errors as follows:
Project: C:\Jdeveloper10g\jdevhome\jdev\myprojects\LabSolutions.jpr
C:\Jdeveloper10g\jdevhome\jdev\myprojects\oracle\apps\fnd\framework\toolbox\labsolutions\Supplier.java
Error: cannot read classfile: XMLDomainInterface.class on classpath C:\Jdeveloper10g\jdevbin\BC4J\lib\bc4jmt.jar/oracle/jbo/domain/XMLDomainInterface.class
Error(162,28): XMLDomainInterface not found in interface oracle.jbo.domain.XMLDomainWriter in class oracle.jbo.domain.Date in class oracle.apps.fnd.framework.toolbox.labsolutions.Supplier
I dont have any clue about these errors. I would highly appreciate if some OA Framework expert can provide some help/suggestion in this regard.
Thanks

Thanks for the reply Gyan!
I am referring following metalink note for jdev patch/version:
How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]
As per the metalink note, for R12.1.3
12.1.3 (patch 9239090 or patch 8919491) Patch 9879989 10G JDEVELOPER WITH OA EXTENSION ARU FOR R12.1.3
Does it mean that for R12.1.3 we can use any of the 3 jdev patches - 9239090 / 8919491 / 9879989 ?
Or we have to use 9879989 only? Please advise.
My collegue was already having patch 8919491. So I am using the same.
Thanks
P.S. I have been using Oracle Forums since 5 years. Just that I am using it with new ID now. Anyway, thanks for sharing forum announcement!

I hate the fact that I can no longer access my Norton toolbox.

I find the new update way more than I need. I dislike that it disabled Norton Security Toolbox without telling me ahead of time. I would not have upgraded. I don't think this update simplifies my online management of anything

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

This is a duplicate topic with your other post. I will lock this one, please look here for responses.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Color LaserJet CP1518ni toolbox error

HP Color LaserJet CP1518ni, when I try to open the toolbox, I get an error message, "HP ToolboxFX has encountered an error and can not recover. Please restart HP Toolbox FX, or restart you PC." I have restarted my PC and it hasn't changed the situation. I don't know how to restart the toolbox as it suggests. How is this done?

I have the same problem. Have you found a solution? My printer is LAN-attached. My OS is Windows Vista.

Hp Laserjet toolbox not loading

I have a Laserjet p2015 running on a Mac with os 10.5.8, and I cannot get drivers to include the toolbox, or anything to give me better than standard printing resolution. The printer is supposed to support 1200dpi but the only option I get is 300 or 600. Also there seems to be a complete lack of "tools" available to make alterations in any of the options windows in the print menues. I have installed all the latest driver packs I can find including the latest Gutenprint ones. Anyone got ideas please

Hello peteholden,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Device Toolbox software Error Unable to connect to the printer

Hi guys,
I'm currently in bit of a nightmare with my HP Laserjet 100 color MFP M175nw.
Basically I have upgraded to a new wireless router and since doing this my HP Laser Jet refuses to work / connect to the wireless network.
I have literally tried just about evey thing I can to get it to work, thoroughly through the manual, uninstalled and reinstalled the software about 12 times, tried firewalls on and off, tried security on the router on and off, tried WPS mode, tried manually entering in the IP address into the printer all without luck. You can see my dedicated thread here
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-LaserJet-Pro-100-color-MFP-M175nw-un...
So currently I have the printer connect to the computer via USB and it works, so I decided to try using the HP Device toolbox software to see if it would give me any more options to try and when I run this software I get
Error: Unable to connect to the printer, make sure your printer is properly connected and powered on and then try to open the HP device toolbox again. Arg!!!
My new router is a Billion 7800DXL, my old router which worked in wireless mode was also a Billion 7300g.
Any help would be great really stuck here

Hello tf22raptor.
I see that you're now experiencing an issue getting the Device Tool box to run. I will try and assist with this.
After reviewing this post and the other thread, I have a few things you can try.
1) Run MS Fix it utility to uninstall the software: Fix problems that programs cannot be installed or uninstalled.
(This is to make sure the software is completely removed and conflicts in the registry get resolved)
2)Msconfig: press windows key and R on the keyboard> in run box type "msconfig"> on window select "services tab"> check box next to "hide all MS services> press disable all> go to "startup" tab> press disable all> press apply and ok at the bottom> this should prompt a PC restart.
Please restart.
3) Re-install via USB
4) Try running the device toolbox now
5)If still having issues installing wireless, you may have to contact the router manufacture.
I hope this helps you out. Thanks for posting on the HP Forums.
I worked on behalf of HP.

Where can I download the toolbox for my HP Deskjet 9800?

I used to have the 9800 deskjet toolbox on my other computer but mr computer crashed so I bought a neww HP Desktop and it is using Windows 7. I really need to know where to download the toolbox so I can tell how much ink I have.

This page has a workaround.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Archivelink Toolbox

Similar Messages

Maybe you are looking for