Archivelog errors...EVERYTHING CHECKS OUT!?

10.2.0
HPUX
I don't know if anyone has ever come across this before.
But I was receiving errors that archiving couldn't find valid locations
ORA-16014: log 1 sequence# 18959 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/ora2/oradata/peregrine/redo01.log'
also
ERROR at line 1:
ORA-16020: less destinations available than specified by LOG_ARCHIVE_MIN_SUCCEED_DEST
and messages like this in the trace file...
ARC6: Failed to archive thread 1 sequence 18956 (4)
Fri Mar 27 06:36:06 2009
ARC7: Archiving not possible: No available destinations
ARC7: Failed to archive thread 1 sequence 18956 (4)
Fri Mar 27 06:36:07 2009
ARC8: Archiving not possible: No available destinations
ARC8: Failed to archive thread 1 sequence 18956 (4)
Fri Mar 27 06:36:07 2009
ARC9: Archiving not possible: No available destinations
ARC9: Failed to archive thread 1 sequence 18956 (4)
I cleaned everything out, cleared out flash recovery area, deleted old logs, you name it. Partition was at 12% used...PLENTY of space.
Thought I would share with you all that might not know this...
Sometimes the state of the archive destination gets corrupted in a way that it just doesn't know what it wants to think.
I ran:
alter system switch logfile
alter system checkpoint
shutdown immediate
startup mount
alter database noarchivelog
alter system open
alter system switch logfile
alter system shutdown immediate;
startup mount
alter database archivelog
alter database open
this resets the state of the archiver. It worked.
This was relayed to me via oracle support...hope it can help someone else that is at their wits end with this situation.

Hi.
What is LOG_ARCHIVE_MIN_SUCCEED_DEST parameter set to.
Post the output of
>
sql> show parameter LOG_ARCHIVE_MIN_SUCCEED_DEST
sql> show parameter log_archive
>
Anand

Similar Messages

  • I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

    I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
    I have tried everything and nothing works.

    sound problems:
    #Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
    #Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
    <p>Additional references
    * [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
    * [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
    * [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

  • HT202213 Homesharing. I had my iTunes set up to play music through my receiver & speakers upstairs. I have airport with RCA plug ins to my receiver auxiliary jacks. Homesharing is on & everything checks out but it no longer works. Any suggestions?

    I had my iTunes set up to play music through my receiver & speakers upstairs. I have airport with RCA plug ins to my receiver auxiliary jacks. Homesharing is on & everything checks out but it no longer works. Any suggestions? I have no firewall & I have removed Smith clean program to fix this issue. I am running OS 10.8.2

    I called AppleCare this morning and Sean helped me out in a huge way. In all of my attempts, I had not done a factory-default reset on the main base station and apparently some sort of endless loop had occurred between those two stations. Sean was very helpful and patient with me, but now the system is working as promised. Moral of this story is if a factory default rest doesn't help on the "problem" base station, try resetting all of the units.

  • Adding Used DC under CRMWEB gives error " .dcdef  checked out by others"

    Hello E-Commerce Experts,
    We need to extend E-Commerce 7.0 b2b application (claims and returns). After much struggle, we could finally deploy the custom application. We now would like to extend it and have new fields added.
    We need to to defined a used dependency in the web module project crm/eservice/web/cr_b2b for customer extension DC provided for java action classes (crm/home/crm/ext) but are getting an error saying:
    DC definition could not be checked out: the file .dcdef is checked out by others. None of the objects have been checked out by any other developers.
    Please advise as to how to resolve this error.
    Additionally, we would like to add CRMJAVA SC as a development component, so we could refer the existing java files. But we are not able to import it properly. It shows up as an empty SC in NWDS after being imported.
    Your help would be highly appreciated.
    Thanks!

    I was able to resolve my error. I had created some other instances of the same project under a different workspace.
    Follow these steps for every workspace  you might have created your project in (except the current workspace):
    For every open activity ( Windows -> Show View -> Open Activities)
    - Select your open activity  -> Right Click -> Revert  and then Delete the activity  (Right click -> delete)
    Delete all your open activities.
    Open your current project and Resync all DCs.
    Now try to add used DC for the web module project.
    It should work.

  • Error in check out operation

    We have implemented CMIS server side code in our DAM system. I have made the connection to it from Drive using the CMIS connector. I can see the folders and documents alright but when I select to check out from the Drive context menu of a document, it gives me the following error on the screen -
    The operation could not be completed. The operation would make a conflicting change to an item that is already checked out. Error code : 6.
    There is nothing in the Drive logs to troubleshoot the issue.
    If someone can please provide any directions on how to proceed further with this, that will be very helpful.

    Hallo,
    ich bin am 25. Juli 2011 wieder im Büro und werde Ihre Mail dann beantworten. In dringenden Fällen wenden Sie sich bitte an unser Büro unter +43 1 9902 804 oder [email protected]
    Mit freundlichen Grüßen,
    Martin Gilly.
    Hello,
    I will be in the office again on July 25th and will then take care of your mail. In urgent cases, please contact our office @ +43 1 9902 804 or [email protected]
    Kind Regards,
    Martin Gilly.

  • Getting error:  *cannot check out a record*  in URM

    We have recently implemented URM and it seems to be working fine as far as checking in records and the dispositions working. The problem occurs if someone tries to check out a record. An error comes up saying that a record cannot be checked out. Am I missing something here? Shouldn't I be able to check out a record, update it and then check in a new version?

    No, that's the point of records, they are not alterable.

  • Getting OBJECTS_OBJREF_NOT_ASSSIGNED_NO Error When Checking Out Firefighter

    When attempting to check out a firefighter ID, we are receiving an OBJECT_OBJREF_NOT_ASSIGNED_NO error.  This happens when a user selects 'Check Out' for the selected firefighter ID in transaction 'GRAC_SPM'. 
    The error is occuring in the CL_GRAC_AD_ACCESS_MGMT========CP ABAP program. 
    Short text:
    Access via 'NULL' object reference not possible.
    Errory analysis:
    ... The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure 'RESET_USR_PWD' '(METHOD)', ...
    The GRC system is on SP4.

    Hi pdleung,
    Check SAP note - 1562759.
    Regards,
    Sabita

  • Error when checking out from external punch out catalog to SRM

    Hi guys,
    We have configured an external punchout in spro. Now when in portal, I am able to access the catalog. But when i check out from catalog to srm, it is throwing error telling "HTTP 404 not found".
    Please help me resolve this issue.
    Regards,
    Madhu N G

    Hi, Hope you are doing good. Nice to hear from you again. We don't have the httpwatch traces, but usually such issues get resolved by setting the parameter JSESSIONID.CookieDomain to "NONE". See: SAP Note No. 791765 : Mixed JSESSIONID Cookies from Different Servers SAP Note No. 1144722: Global configuration of session cookies and                       attributes See SAP notes as well: 1334956 - Various problems that solved by using FQDN in portal URL 654982 - URL requirements due to Internet standards Hope this helps. _ _ _ _ _ _ _ _ _ Kind Regards, Hemanth SAP AGS  _ _ _ _ _ _ _ _ _ 

  • Sound card detected, everything checks out... but no sound.

    I've been trying to get my intel digital audio working, and I'm baffled, the wikis don't have an answer for this.
    Everything the wiki says checks out, but nothing will play.
    [root@harpo jeremy]# lsmod | grep '^snd'
    snd_seq_oss 32768 0
    snd_seq_midi_event 7680 1 snd_seq_oss
    snd_seq 55296 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 7956 2 snd_seq_oss,snd_seq
    snd_pcm_oss 43936 0
    snd_mixer_oss 16640 1 snd_pcm_oss
    snd_hda_intel 332196 0
    snd_pcm 81544 2 snd_pcm_oss,snd_hda_intel
    snd_timer 22280 2 snd_seq,snd_pcm
    snd 56808 8 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
    snd_page_alloc 8720 2 snd_hda_intel,snd_pcm
    [root@harpo jeremy]# ls -l /dev/snd
    total 0
    crw-rw---- 1 root audio 116, 0 2007-06-21 09:40 controlC0
    crw-rw---- 1 root audio 116, 24 2007-06-21 09:40 pcmC0D0c
    crw-rw---- 1 root audio 116, 16 2007-06-21 09:40 pcmC0D0p
    crw-rw---- 1 root audio 116, 25 2007-06-21 09:40 pcmC0D1c
    crw-rw---- 1 root audio 116, 17 2007-06-21 09:40 pcmC0D1p
    crw-rw---- 1 root audio 116, 1 2007-06-21 09:40 seq
    crw-rw---- 1 root audio 116, 33 2007-06-21 09:40 timer
    [root@..]# aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [root@..]#
    As far as I can tell, all that says that it should be working, but it's not.
    When I try and assign a device (I seem to have a choice between oss and alsa) and test the sound in Xorg, I get this:
    audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open resource for writing.
    aplay seems to run, but no sound comes out.
    Any suggestions?

    You should also make sure to add alsa to rc.conf.
    If you don't do that, no matter what you mute / unmute - it may default to muted when you reboot.  Unless you use alsactl to load / store your settings manually...but then that's what adding alsa to rc.conf will do for you
    Hope this helps.

  • PAYMENT_CPG_SETTLE_FAILED I got this error when checking out

    I was trying to buy Adobe Premiere Element 13 online. However, when checking out, I encounter an error "PAYMENT_CPG_SETTLE_FAILED".

    Thanks Peru and Barbara for responding!
    I was trying to buy directly from Adobe website Video editor, edit video | Adobe Premiere Elements 13.
    I was having difficulty locating an email address on Adobe website where I can email the payment error to. Somehow the "Contact Us" on Adobe website leads me to this forum.

  • Get error when checking out jsp file from cvs when Jdev is running in linux

    I have JDev 9.0.3 andd CVS running in linux with same build version.
    When I check out a project one jsp does not show up in the IDE but shows in the file folder correcly when I edit it thru vi.
    I get this error when I try to edit in Jdev.
    java.lang.NullPointerException
         at oracle.jdevimpl.webapp.html.HtmlSourceNode.reopen(HtmlSourceNode.java:159)
         at oracle.ide.model.TextNode.open(TextNode.java:150)
         at oracle.ide.model.TextNode.acquireTextBuffer(TextNode.java:375)
         at oracle.jdevimpl.webapp.html.HtmlSourceNode.getInputStream(HtmlSourceNode.java:239)
         at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.updateDocument(JspPreviewer.java:344)
         at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.open(JspPreviewer.java:161)
         at oracle.ideimpl.editor.EditorManagerImpl.openEditorInFrame(EditorManagerImpl.java:648)
         at oracle.ide.editor.EditorUtil.openExplicitEditorInFrame(EditorUtil.java:33)
         at oracle.ide.cmd.OpenEditorCommand.doit(OpenEditorCommand.java:45)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
         at oracle.ideimpl.editor.EditorManagerImpl.handleEvent(EditorManagerImpl.java:1902)
         at oracle.ide.IdeAction$1.run(IdeAction.java:579)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:149)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:332)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)

    Hi,
    When you are starting service in OS, you are actually starting the maxdb instance service .
    You can set it in auto mode so that you will not get this error.  The OS service only establishes the connection to SAP.
    As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
    Normally no activity is required to be done to under SICF from CS install point of view.
    Anirudh,

  • ADF error when checking out accounts cart

    Hello,
    I have a weird UI related problem in OIM 11gR2. When I try to check out from the user accounts request cart, I get this error message that prevents me from proceeding :
    ADFC-06002: unhandled exception
    ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #10
    In the logs, I see those errors :
    ADFC-02001: The ADF Controller cannot find '/oracle/iam/ui/runtime/form/view/tfs/testform.xml'.
    MDS-00013: no metadata found for metadata object "/oracle/iam/ui/runtime/form/view/tfs/testform.xml"
    So there seems to be something wrong with the MDS, but I don't see what I could have done wrong that might have broken it.
    Any ideas?
    Thanks,
    --jtellier                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    That was it. Thank you.
    --jtellier                                                                                                                                                                                                                           

  • Imac g4 does not power on, but everything checks out???

    Alas, my (formerly) trusty imac does not power up anymore. I've tried every step in the service manual up to the point of replacing hardware, and so far no luck. Details of the machine, the problem, and what I've done follow.
    The short story is that I'm faced with replacing the power supply and/or the logic board after both passed the diagnostic tests recommended in the service manual. Since they both passed the tests, my hopes for success are not high, but at the same time, replacement costs for the two (if I wind up replacing both) run about the same as a replacement machine on ebay! On top of that, I suspect the diagnostic tests available do not test one power supply output -- so maybe it's bad but I just can't tell.
    I would appreciate any advice on the situation. Also, does anyone know if the power supply for the 1st gen machines (800MHz, 15") is supposed to have both 12V and 5V outputs? Thanks a bunch!
    The computer: iMac G4 flat panel 800MHz, working fine from purchase in January 2002 (right after they came out) until August 2006
    The situation: I moved to Japan. Upon unpacking the imac, it would not power on -- no screen, no bong, no sleep light, no fan noise, nada.
    What I have tried:
    -- taking it to the apple store (they quoted a $500-$800 repair -- ouch!);
    -- opening it up and looking for lose wires, burned out power supply components, etc.: nothing found
    --try new power cable; test line filter: everything okay
    -- reset PMU: no change
    -- test battery: checks out, 3.58v; returned battery to imac, reset PMU: no change to computer (i.e. still no power)
    --test power supply and logic board points as per service manual instructions; 12 V registered at all points. tests passed. But I wonder: I have read the the PS for some imacs are supposed to have a 5V output too, but there is no test for that output on this model. I wonder if there is a 5V output on this model, and if there is a way to test for it?
    for those of you counting, that was 2 resets of the PMU, one before i removed and reinserted the battery, and one after. Both PMU resets were done by pressing the button once and holding for about 1 second.
    thanks any and all!
    david
    MacBook Pro   Mac OS X (10.4.8)   also, iMac G4 800MHz

    Hello and Welcome to Apple Discussions. 
    Whilst some iMac G4 models share similar components many differ subtly.
    Use this website to compare part numbers against model.
    If you download (4.2Mb) this service guide there is a troubleshooting section that may help you.
    kind regards
    mrtotes

  • Error when checking out file : http access -if http client-receive-1

    Hi Everyone,
    I get an error when I am trying to upload a file to Content Server or when I try and check it out.
    The issue has been resolved by manually starting the service on an OS level.
    What I would like to know is this:
    In transaction SICF, there is a Content Server Interface service, which you can activate/deactivate. Would this have the same effect as manually starting the service on an OS level?
    Please advise.
    Thanks.
    Freddie.

    Hi,
    When you are starting service in OS, you are actually starting the maxdb instance service .
    You can set it in auto mode so that you will not get this error.  The OS service only establishes the connection to SAP.
    As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
    Normally no activity is required to be done to under SICF from CS install point of view.
    Anirudh,

  • Receiving an error when checking out Visio 2013 file from a Sharepoint 2010 site.

    Receiving the following error when attempting to checkout a Visio 2013 file from a SharePoint 2010 site: "Sorry, we couldn't open 'http://sharepoint/folder/folder/folder/folder/file name".  If you need to know the length of any of the folder
    or file name, please let me know. I have checked answers to other questions but none seem to apply or the person responded that the answer did not work.

    Seems that your Microsoft Office Document cache is corrupted.  please try deleting cache folder :
    Clear the Microsoft Office Document Cache by opening the Upload Center->Settings->Delete cached files.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\14.0\OfficeFileCache.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\15.0\OfficeFileCache.
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Maybe you are looking for