Archivelog mode during Database upgrade

I have database that needs to be upgraded (from 8.1.7 to 10.2.0.4) and this database runs in ARCHIVELOG MODE. My question should I turn archivelog mode off during upgrade? Do you see any benefits or issues with that?

Better option to put database in no archivelog mode. Take a backup and then put database in noarchivelog mode.
Log_archive_format will be different in 10g so while enable you may need to change this parameter.

Similar Messages

Archivelog mode during upgrade

HI All,
During upgrading the database from 10g to 11g... I will put my database from noarchivelog mode to archivelog mode to save the disk space.
Does this task improves or speedsup the process of upgradation or any impact.
Suggestions please.
regards,
TEJAS

when DB is archivelog mode and you put DB in startup upgrade mode.. and execute catupgrd.sql script it starts updating dictionary objects and generates archivelogs ..
Hence i put the DB in noarchive log mode..
Any performance impact by putting the upgrade process in noarchivelog mode in terms of time duration the backup is performed.No performance impact, But recommended to put in Archivelog mode, even though if you have good backup.
Also apart from this thread, have a question, The catupgrd.sql script execution duration depends upon the data disctionary contents right not on the DB size ? i am having this question. plz answer.The upgrade script creates and alters certain data dictionary tables. It also upgrades or installs the following database components in the new Oracle Database 11g Release 2 (11.2) database:
Source:-
Answer is here in detail.. http://docs.oracle.com/cd/E11882_01/server.112/e10819/upgrade.htm#sthref184

3GS stuck in recovery mode during ios5 upgrade

Downloaded ios5 but was not able to sync phone. iTunes keeps telling me to restore iPhone before it can be used with iTunes. During recovery iTunes stops recognizing my phone, the message "iT has detected an iP in recovery mode..." pops up and the process starts over, where it begins downloading ios5 again. It ran like this all night.

Problem solved, so I'm posting an update on how I solved it:
1. Forced phone into DFU mode.
DFU (Device Firmware Upgrade) mode is not the same as restore mode. DFU mode bypasses the current OS installed and allows you to upgrade or downgrade your OS.
I found the info I needed on this link: http://askville.amazon.com/iphone-dfu-mode-explain-breif/AnswerViewer.do?request Id=12881693 so here are the copy/paste directions for how to get to DFU:
Step One
Open iTunes and connect the iPhone to your computer.
Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.
Step Three
After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.
The iPhone screen will be black, but the device will be recognized on iTunes.
2. Clicked "restore" in iTunes.
iTunes downloaded iOS5 (again), which took hours, then restored everything since my last backup (the day before)
The phone is still connected to computer with USB, so resist the urge to touch anything on the phone while it reloads everything...slowly.
Best wishes for a painless recovery.

Error while running catproc.sql during database upgradation Oracle 8.1.7.4

Hi,
We are in the process of upgrading the database from Oracle version 8.1.7.0 to 8.1.7.4
For that we are applying the patch no. 2376472
As per the patch we have run catproc.sql script.
On running the script we are getting below mentioned errors,
BEGIN
ERROR at line 1:
ORA-24001: cannot create QUEUE_TABLE, SYSTEM.DEF$_AQERROR already exists
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2049
ORA-06512: at "SYS.DBMS_AQADM", line 55
ORA-06512: at line 2
BEGIN
ERROR at line 1:
ORA-24006: cannot create QUEUE, SYSTEM.DEF$_AQERROR already exists
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2346
ORA-06512: at "SYS.DBMS_AQADM", line 114
ORA-06512: at line 2
PL/SQL procedure successfully completed.
The above error has been generated while creating the Queue and Queue_Table.
Where i have done mistake ?
Kindly provide guidance.
With Regards

Ignore these errors
http://www.cs.uvm.edu/oracle9doc/server.901/a90191/migmumsg.htm#72864

ZEN TOUCH 20GB - Stuck in Recovery Mode, during Firmware upgrade. HEL

Ooooh dear.
Me and my Zen Touch are completely stuck. Decided to upgrade the Zen's Software and Firmware and am now in deep trouble. Here are the steps I took.
First I sensibly backed up the 2000 songs on the player to my computer. Then I updated the MediaSource software and restarted the computer. Then I decided to go for the big change and downloaded the new PlayForSure firmware installation and that's where the problem starts - It never completed the installation, which I had to manually stop. I knew as part of puting this new Firmware onto the player, the Zen would be wiped clean, which it has. However, I now cannot get it out of recovery mode and it will not respond to attempts to download the new (or any) Firmware onto it.
What I now get is:
-Plug the Zen in, the computer recognises that there is plug and play equipment attached and makes the appropriate noise.
-The Zen will switch itself on as a response (or I can do it manually), with a normal-looking startup. It then briefly flashes a screen saying "Firmware Problem" before going into recovery mode.
-If I choose Clean Up, it takes a few seconds to clean the now empty disk, and returns to the recovery menu
-If I choose Format All, pretty much the same as Clean Up
-If I choose Reload Firmware, it warns me that the firmware will be erased. And asks if it should reload it via USB. You say 'yes' and it briefly flashes up "Start firmware update now" before returning to the recovery mode menu.
And finally, if I select Reboot, that's exactly what it does; the computer recognises that it's turned off, makes the noise, and recognises when it's turned on again.
Trying to download the Firmware from the computer, however, has turned into a nightmare. I've tried downloading the PlayForSure firmware and old Firmware from the files on my computer (running XP, by the way). And I've also tried prompting the Zen starting up the Media Source software, BUT they all claim that the player is NOT connected! Even though it is! The Zen switches on and Windows makes a sound every time I connect or disconnect it!
So what to do? I'm stuck in this vicious circle and no matter what random tricks I try, I can't get out. The player needs Firmware, but the software on the computer claims the player's not connected.
The player is now more than a year old, so I can't return it, and Creative's less-than-generous telephone support is not an option, so I'm left to any imaginati've and kind-hearted subscribers to this list to offer suggestions.
HELP!
Mark in the UK

My son?s Zen simply turned on one morning and refused to do anything except enter recovery mode, giving a firmware problem error and Creative Zen v0.0.58After an hours research I solved the problemI hope this helps someone out, but remember anything you do is your responsibility not mine, continue at your own judgment
Creative site SingaporeDownload driver and firmwarehttp://sg.creative.com/support/downl...ype=0&x=30&y=6
download driverCreative Zen and Jukebox Driver Upgrade version .30.03
firmwareCreative Zen Firmware .00.02
Install driver, connect Zen, should show up in my computerAnd yes, when you open the Zen from there it WILL say not correctly connectedBecause the firmware is corrupted! But it is connected Go to the firmware file and double click, the firmware software will connect to the ZenAnd overwrite the firmware. Follow the on screen instructionsYou may get a warning that the firmware is the same version etc. just do it, as at the moment the Zen is useless. Good luck and if it works repay me by helping someone

Error while running cr9idata.pl during database upgrade to 11.2.0.2

I am updating the R12 database (11.1.0.7) to 11.2.0.2 following document, <Interoperability Notes EBS R12 with Database 11gR2, 1058763.1>.
In the step 7, to create nls/data/9idata directory...
When I ran the perl script, I get the error as below.
$ perl cr9idata.pl
perl: symbol lookup error: /d01/oracle/SID/db/tech_st/11.2.0/perl/lib/5.10.0/x86_64-linux-thread-multi/auto/Cwd/Cwd.so: undefined symbol: Perl_Istack_sp_ptr
Then, when I tried to check with sqlplus, I now have the error as below.
SQL> connect user/password AS SYSDBA
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> exit
Then, when I checked some relevant environment, I noticed TNS_ADMIN is empty.
$ echo $ORA_NLS10
/d01/oracle/SID/db/tech_st/11.2.0/nls/data/9idata
$ echo $TNS_ADMIN
$ echo $LD_LIBRARY_PATH
/d01/oracle/SID/db/tech_st/11.2.0/lib
However, if I run the old environment file in old ORACLE_HOME, then the TNS_ADMIN points to the old one (/d01/oracle/SID/db/tech_st/11.1.0/network/admin/SID_host).
And I believe this is not valid...
At the same time, when I check the tnsnames.ora, there are only example/default files under <samples> directory.
$ cd /d01/oracle/SID/db/tech_st/11.2.0/network/admin/
$ ls
samples shrept.lst
How should this be handled to proceed to the next step?
Should I define TNS_ADMIN with the old path...???

Hi;
Please DO NOT use your old oracle_home, as note mention The ORACLE_HOME environment variable points to the new 11.2.0 Oracle home.
Please set below wiht new ORACLE_HOME than try steo 7
- The ORACLE_HOME environment variable points to the new 11.2.0 Oracle home.
- The PATH environment variable includes $ORACLE_HOME/bin and the directory where the new perl executable is located (usually $ORACLE_HOME/perl/bin).
- The LD_LIBRARY_PATH environment variable includes $ORACLE_HOME/lib.
- The PERL5LIB environment variable points to the directories where the new perl libraries are located (usually $ORACLE_HOME/perl/lib/[perl version] and $ORACLE_HOME/perl/lib/site_perl/[perl version])
Regard
Helios

Code changes during database upgrade

Hi,
We are planning to upgrade from 10gR2 to 11gR2 on AIX plateform. Do we need any mandatory changes in existing codes (at sql level or plsql level)so that the the behaviour and the performance of the system remain same after upgrade? Thanks.

Going from 10g to 11g,
I had to make no changes in standard SQL and PL/SQL.
Good upgrade compatibility.
Going from 11g to 10g can cause problems for some things,
like use of PIVOT clause in 11g, not supported in 10g.
But I am wiith the other user, build test box and test away!!

PERFSTAT schema not upgraded during database upgrade

Hi,
I am currently working in 9i to 10.2.04 upgrades and I am seeing that the perfstat schema is not upgraded properly and I am getting error after upgrade. As temporary solution I am dropping perfstat and configuring statspack again. But for production systems I need the data, Is it possible to fix this perfstat schema error after upgradation.
Thanks
Tamil

After upgrading from 9i to 10.2.0.4 when I take a snapshot I am getting error. And also same for purging.. I am posting here a sample error
SQL> exec statspack.snap
BEGIN statspack.snap; END;
ERROR at line 1:
ORA-12899: value too large for column "PERFSTAT"."STATS$SGASTAT"."POOL"
(actual: 12, maximum: 11)
ORA-06512: at "PERFSTAT.STATSPACK", line 2036
ORA-06512: at "PERFSTAT.STATSPACK", line 91
ORA-06512: at line 1
Thanks
Tamilselvan

Switched Database to ARCHIVELOG Mode, Then it Hung

Hi everyone,
This db is 9.2 on Windows.
**After switching my database to Archivelog mode and reopening, it hung forever.**
(I had to use Shutdown abort to bring it down - these steps worked to get it back online:
shutdown abort; --startup mount;
alter system archive log all;
alter database noarchivelog;
alter database open;)
The Alert.log shows "Cannot allocate new log" immediately after I switched to Archivelog mode. So it hung at that point. Had I known why it hung, maybe running 'Alter system archive log all' would have fixed everything. But I've never had to run that when I've switched other databases to Archivelog mode.
Does this indicate another problem with this database? I'm leery of it now and feel lucky that I was able to get it up again.
Thanks, John
entries from Alert.log when I switched to Archivelog mode:
ALTER DATABASE MOUNT
Wed Aug 06 11:44:19 2008
Successful mount of redo thread 1, with mount id 1689013583
Wed Aug 06 11:44:19 2008
Database mounted in Exclusive Mode.
Completed: ALTER DATABASE MOUNT
Wed Aug 06 11:44:45 2008
alter database archivelog
Wed Aug 06 11:44:45 2008
Starting control autobackup
Control autobackup written to DISK device
handle 'F:\ORACLE\ORA92\DATABASE\C-1602026732-20080806-00'
Completed: alter database archivelog
Wed Aug 06 11:45:17 2008
alter database open
Wed Aug 06 11:45:17 2008
Thread 1 opened at log sequence 9014
Current log# 1 seq# 9014 mem# 0: F:\ORACLE\ORADATA\PBSMEM\REDO01.LOG
Successful open of redo thread 1
Wed Aug 06 11:45:17 2008
SMON: enabling cache recovery
Wed Aug 06 11:45:17 2008
Undo Segment 1 Onlined
Undo Segment 2 Onlined
Undo Segment 3 Onlined
Undo Segment 4 Onlined
Undo Segment 5 Onlined
Undo Segment 6 Onlined
Undo Segment 7 Onlined
Undo Segment 8 Onlined
Undo Segment 9 Onlined
Undo Segment 10 Onlined
Successfully onlined Undo Tablespace 1.
Wed Aug 06 11:45:17 2008
SMON: enabling tx recovery
Wed Aug 06 11:45:17 2008
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: alter database open
Wed Aug 06 11:59:58 2008
Thread 1 advanced to log sequence 9015
Current log# 2 seq# 9015 mem# 0: F:\ORACLE\ORADATA\PBSMEM\REDO02.LOG
Wed Aug 06 12:01:03 2008
Thread 1 advanced to log sequence 9016
Current log# 3 seq# 9016 mem# 0: F:\ORACLE\ORADATA\PBSMEM\REDO03.LOG
Wed Aug 06 12:09:16 2008
Thread 1 cannot allocate new log, sequence 9017
All online logs needed archiving
Current log# 3 seq# 9016 mem# 0: F:\ORACLE\ORADATA\PBSMEM\REDO03.LOG
**** PrefBid App locked up at this point – hung – users cannot do anything -- Note the gap in log entry time – no further entries until my Shutdown request

Hi,
We can enable automatic archiving after instance startup.
In order to enable automatic archiving without shutting down the current instance, use the SQL command ALTER SYSTEM with the ARCHIVE LOG START parameter.
ALTER SYSTEM ARCHIVE LOG START;
When using this option, the instance does not have to be shut down to enable automatic archiving.
However, if an instance is shutdown and restarted after automatic archiving is enabled using this option, the instance is reinitialized using the settings of the parameter file ("LOG_ARCHIVE_START"), which may or may not enable automatic archiving.
NOTE: On 9i, you can use an SPFILE instead of the standard pfile. The LOG_ARCHIVE_START parmaeter is deprecated with 10g.
alter system set log_archive_start=true scope=spfile;
Did you read the Metalink Note I gave you? These information was there...
Thanks,
Marcello M.

Enable archivelog mode while datbase is open

Hi everybody
Kindly I need to ask if possible to enable archivelog mode while database in open status for oracle 11g? and if yes .. what is the statment?
Thanks in advance
Edited by: user11254543 on Jun 8, 2011 11:51 PM

You cant enable the archivelog mode when the database is in nomount state because the archive log information is kept in Control file like db in archivelog mode or not,log sequence number,SCNs,logfiles members,etc.. When we start the database in nomount state then only the pfile/spfile is read and sga is allocated and background processes are started but no controlfile is read ..to read the controlfile the database must be started in mount state..Why we require a controlfile is because it stores critical information about the database...If we start the database in mount state then it recognizes whether database is in archivelog mode or not , If it is in archivelog mode then it sees whether an instance recovery is needed or not by verifying the log sequence numbers in controlfile,redologfile & the datafile ..If an instance recovery is required then it performs the instance recovery by calling smon background process or if a datafile header is not up to date then we have to perform the media recovery using the redo logfiles...
For open state you have to post the reply..it will help you to explore yourself...Good Luck!

Additional Patch R12 database upgrade

Hi,
I am upgrading my ebs db 10.2.0.4 to 11.2.0.3.
Please suggest the way to approach for additional patch ->13001379
a)I hv unziped patch
b)In README, -> Prerequisites -> 7. cp kutable.xsl rdbms/xml/xsl/.
As per the readme my understanding is - > I hv to copy the file from dir: /13001379/files/rdbms/xml/xsl/kutable.xsl to $ORACLE11g_HOME/rdbms/xml/xsl/ (file already here->update the file)
Then do -> opatch apply
Post step: Will happen during database upgrade
c)If I am wrong, please correct me.
Thanks,
Salim

a)I hv unziped patch
b)In README, -> Prerequisites -> 7. cp kutable.xsl rdbms/xml/xsl/.
As per the readme my understanding is - > I hv to copy the file from dir: /13001379/files/rdbms/xml/xsl/kutable.xsl to $ORACLE11g_HOME/rdbms/xml/xsl/
Then do -> opatch apply
Post step: Will happen during database upgrade
c)If I am wrong, please correct me.Correct except for post installation which you have to do after the upgrade (Step 15. Perform patch post-install instructions).
Thanks,
Hussein

Database upgrade to 10.2.0.4 error - oracle RAC status showing Invalid

Hi all,
I am getting this error during database upgrade to 10.2.0.4 error - "oracle real application clusters status invalid. "
I am getting the above error after running catupgrd
and checking the status SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
This is not a RAC database and this is the only components which shows INVALID.
Is it normal? Please advice me the action/steps to take to rectify ASAP as it is urgent ... Thanks & Regards, Deepak Gupta

Probably database was 9i and it was upgraded to 10g?
It can be normal situation.
Please check metalink note 312071.1
If database is not rac, then simply ignore this status as workaround is quite difficult and definetely it's not worth to go for it.

During R12 upgrade adworker for patch u6678700.drv fails for afopp002.sql

Hi Experts,
During R12.1.1 upgrade from 11.5.10.2 adworker for patch u6678700.drv fails for afopp002.sql
The exact error being faced is
sqlplus -s APPS/***** @/u03/oracle/CRP1PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/sql/afopp002.sql &un_fnd &pw_fnd
Connected.
declare
ERROR at line 1:
ORA-20000: Oracle Error Mkr1= -24018 - ORA-24018: STOP_QUEUE on
APPLSYS.FND_CP_GSM_OPP_AQ failed, outstanding transactions found
ORA-06512: at line 15
I even tried restarting the worker,bounced the database and even tried running u03/oracle/CRP1PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/sql/afopp002.sql manually which hangs for indefinitely.
Any suggestion.

Hi Srini,
Let me walk you through briefly regarding the upgrade process:
Initially the existing instance was 11.5.10.2 with 9.2.0.6 database.Last year the database was upgraded to 11.2.0.1 and configured with 11.5.10.2
However the 11g database upgrade steps specifically for EBS 11i(interoperatibility notes for 11i with 11g database) was not followed properly.
And one of the major key issue identified was the 11g Example CD was not installed on top of 11g software during database upgrade.Which is the pre-req for 11g upgrade in EBS
And as per my experience it creates issues during R12 upgrade (patch u6678700) and giving errors pertaining to oracle text error.
SR was raised for the same and was suggested, since there is no other option kindly install the Oracle 11g software and on top of that 11g Example CD and map the 11g database and go ahead with the R12 upgrade.
Now coming back to the core issue being faced, Pre-req followed properly.No errors in alert logs.
Can missing the Example CD installtion be the issue?
Regards,
Aman Vats

Best practice to secure database during patching/upgrade-Vault disabled

I have a highly confidential system and to protect the data in the DB, I intend to use Oracle Vault. In my company, we have centralized services and therefore, the oracle Unix owner and sysdba are owned by this group, not the application dba that "knows" the system (me).
The problem I have is what would be the best way to protect my data from the sysdba user during the window that Vault is disabled?
I thougth maybe I could un-mount and file protect the tablespace from the Unix oracle user during the upgrade process, but the tablespace could be outdated when I remount it after the patch. I am not sure how I might patch it seperatley. I am thinking I might export and drop the schema during the patching, then load it back in when vault is enabled again. This will work for a year or so, but I envision the databases getting too large to do this efficiently.
Does anyone have any thoughts on how I might protect the data in this scenario?
Edited by: user4714217 on Oct 20, 2008 11:06 AM for clarity

Hi,
I did not understood your question properly, but the thing which I understood is like you do not want any other user to access the database when your security vault is disabled.
At that time you can
1) Start the database in restrict mode (only a sysdba can do it).
2) Change the password/lock the user till the time your patching activity is going (any user with dba role can do it, so might be not so useful)
Regards
Anurag Tibrewal

Database crashes when placed in Archivelog mode

My production database continues to crash when I place it in Archivelog mode. This happen especially during the period most of the heavy jobs is running. On the other hand, I created a clone of this very same database on another server in Archivelog mode and it is running great. It’s also honest to say the jobs that run on the production are not running in the clone.
Any advice will be appreciated.
Edited by: Albert Zaza on Apr 27, 2010 8:24 AM

>
Please post last 50 lines of the alert log (there should be a very readable error message).
Sun Jan 17 10:35:29 2010
Thread 1 advanced to log sequence 12834
Current log# 2 seq# 12834 mem# 0: J:\ORA_TPISG64A\TPISG64A\REDO02.LOG
Sun Jan 17 18:21:12 2010
Thread 1 advanced to log sequence 12835
Current log# 3 seq# 12835 mem# 0: J:\ORA_TPISG64A\TPISG64A\REDO03.LOG
Sun Jan 17 23:01:01 2010
Thread 1 advanced to log sequence 12836
Current log# 1 seq# 12836 mem# 0: J:\ORA_TPISG64A\TPISG64A\REDO01.LOG
Mon Jan 18 07:54:55 2010
Thread 1 advanced to log sequence 12837
Current log# 2 seq# 12837 mem# 0: J:\ORA_TPISG64A\TPISG64A\REDO02.LOG
Mon Jan 18 13:03:59 2010
KCF: write/open error block=0x22f online=1
file=2 J:\ORA_TPISG64A\TPISG64A\UNDOTBS01.DBF
error=27072 txt: 'OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.'
Mon Jan 18 13:03:59 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_dbw0_4136.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 2 (block # 559)
ORA-01110: data file 2: 'J:\ORA_TPISG64A\TPISG64A\UNDOTBS01.DBF'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
DBW0: terminating instance due to error 1242
Mon Jan 18 13:03:59 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_pmon_4588.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:00 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_lgwr_5068.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:00 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_j000_728.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:01 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_reco_4824.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:01 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_ckpt_4964.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:01 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_smon_4976.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:01 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_psp0_1584.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:02 2010
Errors in file j:\oracle\product\10.2.0\admin\tpisg64a\bdump\tpisg64a_mman_4364.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Mon Jan 18 13:04:13 2010
Instance terminated by DBW0, pid = 4136
Tue Jan 19 07:31:47 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 251658240
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 50331648
streams_pool_size = 50331648
nls_length_semantics = BYTE
resource_manager_plan =
sga_target = 5133828096
control_files = J:\ORA_TPISG64A\TPISG64A\CONTROL01.CTL, J:\ORA_TPISG64A\TPISG64A\CONTROL02.CTL, J:\ORA_TPISG64A\TPISG64A\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 4781506560
compatible = 10.2.0.2.0

Archivelog mode during Database upgrade

Similar Messages

Maybe you are looking for