Archivelogs are missing sometimes !

Hi Friends ,
I am using now Oracle 10g version in Linux . sometimes I see that some archivelog are missing in my archivelog destination . For example , see the below output :
[oracle@test archivelog]$ ls -lrt
total 388
-rw-r----- 1 oracle oinstall 1024 May 13 12:57 1_6_718892273.dbf
-rw-r----- 1 oracle oinstall 286208 May 13 12:59 1_8_718892273.dbf
-rw-r----- 1 oracle oinstall 95744 May 13 13:00 1_9_718892273.dbf
[oracle@test archivelog]$ pwd
/u01/archivefs/ORCL/archivelog
here archivelog 7 is missing . But Idont understand why sometimes archivelogs are missing and how can I recover it . If I need to recover database then is the recovery process (specially time based or any other) is performed successfully ?
Plz tell me , "why here archivelog missing ?" . I dont delete any archivelog from this location and also I dont use FRA , I store archivelog into another filesystem .
Barring this , Regarding downstream dataguard configuration , I also face the same problem in my production server and for the archvielog missing of production , my standby database cannot capture the redologs from production .
waiting for kind reply ...

Here is the full output :
NAME THREAD# SEQUENCE# FIRST_TIME NEXT_TIME COMPLETION_TIME ARCHIVED DELETED
/u01/archivefs/ORCL/archivelog/1_13_718892273.dbf,1,13,5/13/2010 1:24:10 PM,5/13/2010 1:24:14 PM,5/13/2010 1:24:15 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_12_718892273.dbf,1,12,5/13/2010 1:24:08 PM,5/13/2010 1:24:10 PM,5/13/2010 1:24:10 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_11_718892273.dbf,1,11,5/13/2010 1:22:07 PM,5/13/2010 1:24:08 PM,5/13/2010 1:24:08 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_10_718892273.dbf,1,10,5/13/2010 1:00:00 PM,5/13/2010 1:22:07 PM,5/13/2010 1:22:08 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_9_718892273.dbf,1,9,5/13/2010 12:59:34 PM,5/13/2010 1:00:00 PM,5/13/2010 1:00:00 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_8_718892273.dbf,1,8,5/13/2010 12:58:53 PM,5/13/2010 12:59:34 PM,5/13/2010 12:59:37 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_6_718892273.dbf,1,6,5/13/2010 12:57:08 PM,5/13/2010 12:57:17 PM,5/13/2010 12:57:17 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_5_718892273.dbf,1,5,5/13/2010 12:54:56 PM,5/13/2010 12:57:08 PM,5/13/2010 12:57:08 PM,YES,NO
/u01/archivefs/ORCL/archivelog/1_4_718892273.dbf,1,4,5/13/2010 12:51:46 PM,5/13/2010 12:54:56 PM,5/13/2010 12:54:59 PM,YES,NOEdited by: shipon_97 on May 13, 2010 1:39 PM

Similar Messages

  • Icons are missing on IBar and on Everything launcher sometimes

    Hello,
    I'm using enlightenment (E17) and I'm happy with it.
    However, sometimes application icons are missing on IBar and on Everything launcher:
    This happens rarely, maybe once on 10 boots.
    I've read this topic. I've evas_generic_loaders installed. But still icons are missing sometimes
    Any suggestions what else can I try? Or where can I check what is going wrong (e.g. some logs)?
    Thanks in advance!
    Last edited by uaarcher (2013-03-10 19:41:30)

    Thanks for clue!
    I'll chech if if it happens after updates or not

  • Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

    Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

    How is your iPod configured to sync music from your iTunes library?  In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
    B-rock

  • Line items are missing during transferring ITS to EBP--tricky problem

    Hi,
    We are using EBP 2.0 version.
    Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
    This is happening randomly.we had checked all the shoppping cart related tables in EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated except first one.
    This is happening randomly for few of the shopping carts that too most of the cases first  item of  the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but i couldn't find the problem.
    any one could you please advise me....why this is happening?whether it is a version problem?
    Thanks,
    Ravi

    Hello Ravi,
    I guess you already checked OSS notes for this.
    Have you checked in the area of ITS ?
    When ITS sends data to EBP, only the actual screen data is sent:
    - item procurement data from basic data
    - item accounting data from accountig tab
    then this data is used to update the SC.
    If you have debugged those 2 screens, you should see what is happening.
    You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
    If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
    Finally, there are two options:
    - this is an ABAP error, so you should catch it in debug
    - this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
    Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
    Rgds
    Christophe

  • HT3819 My iMac had a corrupt seagate HD that had to be replaced my imovie files & itunes video library are missing when I picked up my Mac from Apple?

    I purchased my 27" iMac in October 2010 after attending classes we discovered my computer needed new graphics card, hard drive, and a total rebuild after owning it only 6 months. Apple rebuilt my new computer, several months later same issues began yet again, slowly Apple began replacing defective parts they installed, my computer still hasn't worked as it should and has been in and out of Apple all the time sometimes they keep it for weeks! running tests?? February 10, 2013 I took my imac back in because it has been taking upwards of 6 minutes to make 1 single edit in imovie after 6 days of editing my project I could No Longer save in itunes, external HD, or export my imovie videos (they are 4 min up to 20 min max) Apple informed me that my Hard Drive was corrupt a bad batch of Seagate HD had been installed and my computer was again affected by this and it needed to be replaced and they couldn't get it to respond at all my itunes library was missing, etc. We saved my videos on my external HD I brought in with me. The Genius bar said they would call me in 3-5 days for me to pick up my computer. 9 Days later not hearing back from them I went in to get an update February 19, 2013 No one can tell me what was done except my HD was replaced they can't answer my questions about my itunes library being reinstated or my videos, music is missing, podcasts, etc. I was even using icloud, empty? They tell me IF I find anything wrong or not working again to just bring it back.  My iMovie videos ALL the edits are missing ? I can't find ANY of my videos in my itunes my Library is empty as it is in imovie except for 2 videos? HELP! I can't imagine having to re-edit my entire video with sound effects, fronts, graphics, etc. I spent weeks on this :-( I'm at my wits end with my iMac.... I have searched in my previous itunes library EMPTY ! Waaaah! I want my mommy....

    The Apple Store is not responsible for data loss and generally does not do any backups of your data before performing any repairs, though in some cases, as seems to be the case in yours, they guide you to making your own backup. Here's what they say on the "getting service page" (when I've taken a system in for service a similar statement was presented to me when I agreed to the service):
    Many repairs require Apple to replace or reformat the hard disk, which will result in the loss of your data. Please make sure you back up your data on a regular basis to minimize your data loss. Learn more about backup options. Apple and Apple Authorized Service Providers are not responsible for any damage to or loss of any applications, data, or other information stored on your Mac desktop while performing service.
    Since you say that you backed up your videos before the drive was replaced, why can you not just restore them? And did you not back up anything else?
    If you didn't make any sort of backup of your other data prior to taking the iMac in for service, then sorry but your data is almost certainly gone. Regular reliable backups are a must, particularly when dealing with content you spend a lot of time creating. You may be able to re-download any content you purchased from the iTunes Store or Mac App Store, but anything else you'll have to recreate or re-obtain from the original source.
    Regards.
    Message was edited by: varjak paw

  • Images are missing in Project Manager

    I’m replacing old images with new ones in RoboHelp HTML 10.
    I’ve deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don’t feel the need to give the files described names at the moment.)
    It has worked fine until now when I noticed that some images are not showing in Project Manager. I see the “folder” Images and I see a lot off images there but some are missing. The “missing” images are shown in Design view and in the browser after publishing. But in the report Unused files the “missing” images are listed as unused.
    I have tried to
    close and reopen the project,
    generate and publish the project,
    delete an “missing” image from Design view and insert it by using Insert / Image. After saving this image, and some other “missing” images, are shown in Project Manager. But not all “missing” images.
    Does anyone know why this is, or more important how to get Project Manager to show all images that are used in the project (without having to go through all 154 images trying to figure out which are used but “missing”)?
    Some more facts:
    They are all gif-images.
    They are all stored at the top-level in the project folder. (Are there a limit how many images there can be in the top-level folder?  Should I create a separate folder and move the pictures there?)
    HTML-code for one “missing” image:
              <img src="image7.gif" alt="" style="border: none;"
                     border="0" />
    Grateful for any input!

    I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
    Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
    You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
    Backup first.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Logon credentials for this request are missing

    Hello,
    we are having a probem with our Crystal Enterprise v. 10  environment, running on a Win2003 OS
    When end-users Push a report to Crystal Enterprise, they sometimes get a message:
    "Logon credentials for this request are missing"
    In case end-users than manually logon, they can see the report, if they rerun the report again, it may show the report.
    We tried to track the problem, using trace options and looking at the event viewer, but no results.
    We do not have these problems on other environments, the only difference is, that this 'problem' environment, runs on a virtual server W2003.
    We use CE version 10 with the latest SP (6).
    Anyone has an idea?
    Paul

    Jawahar,
    Thank you for your quick response.  We are on version 4.0 and these are Crystal reports.
    I was provided with some additional information. It does not seem that the issue is impacting all of our users in China. The IT manager there is reporting that on his machine he is able to access the reports fine, however other users (all using Chinese Windows 7) are having the issue and he is having the issue when using their machines. As you mention and also based on our initial testing, it does not appear that this is an issue with the OS language, however this is why that was provided to me as a possibility. 

  • Sent emails are missing from Thunderbird following migration from alternative email client and import of emails

    All sent emails are missing from the Thunderbird 'Sent' folder following import, but Sent folder still shows a count of the imported emails (Thunderbird considered them to be unread when importing them, hence the count). The messages are also visible online (BT Internet email) and on other devices (Android running BlueMail). Settings are set to place copies of sent items into Sent folder. Having imported all my old email, I can send email but again they do not appear in the Sent folder (but do appear online and on other devices). I have tried compacting the Sent folder and i have tried repairing the folder. All other folders (Inbox, other newly created folders) show the email i have imported.
    If I move an email online from the Sent folder to another test folder, it syncs and appears in Thunderbird in that test folder. If I then use Thunderbird to move the email back from that test folder to the Sent folder then Thunderbird will do so, but locks up for a good minute or so while doing that.
    Running TB 24.6.0 on Windows 8.1, incoming server set to IMAP on mail.btinternet.com (port 993), outgoing server set to SMTP on mail.btinternet.com (port 465).
    Help gratefully received!

    Cheers for that, Mulder.
    It did seem to recover some emails which had disappeared from Mail, but not all of them. That's the frustrating thing - short of going through my Yahoo webmail accounts and logging every single email, and then cross-referencing with what's on my desktop, I just can't be sure what's there and what's not!
    Sometimes it's immediately clear that something is awry - the folder I use for emails from my girlfriend is completely empty, for instance, when I definitely had things in there before the weekend. (Yes, again I went away for the weekend, with the computer still running - and Mail on - and again I returned to discover emails missing.
    Arrgh!

  • HT4199 Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

    Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • CRYSTAL XI SOME PARAMETERS ARE MISSING VALUES

    I have a huge problem with parameters in crystal reports XI.
    Iam developing using jdeveloper 10g and a jndi connection
    I use th following code into my jsp
    the report filelds are set correctly and they HAVE values
    but after the execution of the following code
    i get the following message
    ERROR SOME PARAMETERS ARE MISSING VALUES
    also I install both commonwinXI_chf and cXIwin_chf fixes from crystal and still nothing .Any solutions to this problem because Iam freaking out
    for once more crystal reports XI supports sucks
    my code:
    IReportSource reportSource= (IReportSource)session.getAttribute("reportSource");
    Fields fields=(Fields)session.getAttribute("reportFields");
    CrystalReportViewer crViewer=new CrystalReportViewer();
    crViewer.setReportSource(reportSource);
    crViewer.setParameterFields(fields);
    crViewer.setEnableParameterPrompt(false);
    crViewer.refresh();
    // my fields have values
    crViewer.setOwnPage(true);
    crViewer.setOwnForm(true);
    crViewer.setPrintMode(CrPrintMode.ACTIVEX);
    // if i set fields=crViewer.getParameterField then filelds variable is empty!!
    try{
    crViewer.processHttpRequest(request,response,getServletConfig().getServletContext(),out);
    crViewer.dispose();
    }catch(ReportSDKException e){
    out.println(e);
    }

    Sorry man sometimes i forget even my self!!
    In order to connect crystal with JNDI you have to set the correct parameters
    into CRConfig.xml
    for example
    <JDBCURL>jdbc:oracle:thin:@somewhere:ORA_DB</JDBCURL>
         <JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
         <JDBCUserName>username</JDBCUserName>
         <JNDIURL>t3://somewhere:7001</JNDIURL>
         <JNDIConnectionFactory>weblogic.jndi.WLInitialContextFactory</JNDIConnectionFactory>
         <JNDIInitContext>/</JNDIInitContext>
         <JNDIUserName>weblogic</JNDIUserName>
    also
    you have to provide the same info into file
    CRDB_JavaServer.ini
    [CRDB_JDBC]
    CacheRowSetSize = 100
    JDBCURL =
    JNDIURL =t3://somewhere:7001
    JDBCUserName = guest
    JNDIUserName = weblogic
    JNDIConnectionFactory = weblogic.jndi.WLInitialContextFactory
    JNDIInitContext = /
    I put both files into WEB-INF classes directory
    and finaly in both cases you have to include in your project the driver libs
    in my case I use weblogic therefore I have included weblogic.jar into my classpath

  • My google toolbar buttons are missing

    After upgrading to Firefox 4 google toolbar buttons are missing. Even when using Firefox 3.6, this problem used to happen sometimes. I tried deleting localstore.rdf, but it didn't fix the problem. I have windows 7 on my laptop.

    '''Google Shortcuts for Firefox.''' Display all Google services as buttons or as a space-saving dropdown menu next to your address bar. Reach services like Gmail, Google reader, Google maps, Google calendar, and many more in a single click from your browser. [http://www.googleshortcuts.org/ Google Shortcuts]

  • Some NAL folders are missing

    Hello!
    For some days, we have a strange problem: We use ZfD and NAL to give our
    users access to their applications. When they login, they sometimes miss
    some folders in NAL. Some other folders appear, but they are often
    incomplete, i.e. some icons are missing. Has anyone seen this before? Does
    anyone have a hint where to start searching? (dsrepair showed no problems.)
    Netware 6.5
    ZfD 4.01

    Lk,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Can open pdf in CS3 with embedded images, put when opened in CS6 or CC the images are missing

    Hi, Would really appreciate some help on this.
    I frequently get artwork from clients saved as illustrator eps and pdfs files, that can be opened within CS3 and printed, no problem.
    Having recently gone to CS6 and now CC I sometime find I can't open artwork supplied, as the images (links) are missing.
    The same documents seem to open in CS3 without any problem.
    Could someone explain why this is, and how I can open these documents within the newer versions of illustrator without the missing link problems
    kind regards
    Ed

    I suspect your documents are some higher version than CS3 but lower or equal than CS6.
    So in CS3 you actually open the PDF part with images ambedded, while CS6 accesses the Ai part without images.
    You really should ask the clients to supply files according to whatever specification you need.
    But you can also extract the images from the PDF parts of your file simply by opening them in Photoshop. Then select "Images" in PDF options and open the images you need.

  • When i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing

    when i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing  please reinstall..ive reinstalled 5 times  ,all 5 clean installs ...still dont work with Iphone 3 ..

    Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.

  • Cannot get itunes to run on xp.  Every time i download, it finishes installation then can't open because files are missing

    I can't get itunes to download and actually work on my PC.  I have quicktime downloaded and functioning, have updated everything several times, uninstalled and reinstalled from different links...when it completes the installation phase,  I get a congrats screen, then it refuses to load because files are missing. 
    Sometimes, on startup, Itunes suddenly opens, although the shortcut still wont work.  It sees my Ipod (new, latest generation) sees my songs, attempts to sync then I get a 1450 error and the whole thing closes, not to be opened again until the next time I reboot and it occurs. 
    Anyone help?  I've turned off my firewall, filters, pop up blockers, everything I can think of.  Been at this a month now....

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

Maybe you are looking for