Archiver failing -- Urgent

One of my production database is failing with the following error.: Can some one help. The error is as given below:
Creating archive destination LOG_ARCHIVE_DEST_1: '/u01/arch/tgwtas/tgwtas1_4538.dbf'
Mon Aug 20 14:11:28 2007
Creating archive destination LOG_ARCHIVE_DEST_1: '/u01/arch/tgwtas/tgwtas1_4539.dbf'
ARC0: I/O error 19502 archiving log 1 to '/u01/arch/tgwtas/tgwtas1_4539.dbf'
Mon Aug 20 14:11:28 2007
ARC1: I/O error 19502 archiving log 2 to '/u01/arch/tgwtas/tgwtas1_4538.dbf'
Mon Aug 20 14:11:28 2007
Errors in file /home/oracle/admin/tgwtas/bdump/tgwtas_arc0_25883.trc:
ORA-19502: write error on file "/u01/arch/tgwtas/tgwtas1_4539.dbf", blockno 10241 (blocksize=512)
ORA-27072: skgfdisp: I/O error
Linux Error: 2: No such file or directory
Additional information: 10240
ORA-19502: write error on file "/u01/arch/tgwtas/tgwtas1_4539.dbf", blockno 10241 (blocksize=512)
Mon Aug 20 14:11:28 2007
Errors in file /home/oracle/admin/tgwtas/bdump/tgwtas_arc1_25885.trc:
ORA-19502: write error on file "/u01/arch/tgwtas/tgwtas1_4538.dbf", blockno 10241 (blocksize=512)
ORA-27072: skgfdisp: I/O error
Linux Error: 2: No such file or directory
Additional information: 10240
ORA-19502: write error on file "/u01/arch/tgwtas/tgwtas1_4538.dbf", blockno 10241 (blocksize=512)
Mon Aug 20 14:11:28 2007
ARC0: Archiving not possible: error count exceeded
Mon Aug 20 14:11:28 2007
ARC1: Archiving not possible: error count exceeded
Mon Aug 20 14:11:28 2007

Hey Guys:
I could figure out the issue by myself. It was a space issue in the archive location.
Sudden sprooning of logs all of a sudden.
Regards,
- BMP

Similar Messages

LMS 3.2 - RME 4.3.1 Sync archive fails

Hi,
Sync archive fails for some of my devices.
This is the message :
*** Device Details for .... ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> Telnet,TFTP,SSH,RCP,HTTPS
Execution Result:
CM00139 Could not archive config Cause: Action: Verify that device is managed and credentials are correct. Increase timeout value, if required.
Check device credential is OK (Telnet + SNMP V2)
This device is Cisco Systems WS-C6009.Cisco Catalyst Operating System Software, Version 7.4(3). (sysObjectID : enterprises.9.5.39)
I have modified the "Maximum time to wait for Job Results per device (seconds):" to 240.
What could be wrong?
Thanks in advance

Resolution Summary:Checked the dcmaService.log and found the following recurring statements.
com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,406,Descr = 12.2(50)SE
[ Tue Oct 26 15:58:45 CDT 2010 ],DEBUG,[main],com.cisco.nm.xms.xdi.pkgs.LibCommon.common.CommonUtility,getMinSupportedVersion,405,suppSysId = .1.3.6.1.4.1.9.1.927
[ Tue Oct 26 15:58:45 CDT 2010
Checked that the device IOS was well above the version specified in the logs, so thought may be an issue with the device packages.
Checked the mdf version was 1.25 which came as default when we install LMS 3.2, so upgraded the mdf version to 1.45.
Still the issue didn't got solved, so upgraded the RME device packages and now the archive job was successful.
Message was edited by: Dheeraj Gera

Ganesh Kotti(archiving failed messages)

Hi everyone:
I have read the document: Archive and Degete Messages in SAP XI: A Step-by-Step Guide. Author Ganesh Kotti.
Inside this document there is this sentence:
XML messages that do not have the status Processed Succesfully remain in the database and I will adress later how to archive failed messages.
but It doesnt explain nothing about how to archive failed messages, Can somebody help me?

Hi Ganesh,
Your extract on XI Archiving (especially Failed Messages) was very very helpful. I have however, encountered an error message whilst trying to cancel the processing of some messages within the monitor. The error message is as follows:
"You cannot cancel XML Message <Message_ID> with this status/type".
Now the Status column has a Chequered Flag, while the c column has a Red Flag. Do you know how to cancel such messages?
Best regards,
Reuben.

FAL[server, ARC1]: FAL archive failed ,network reconnect abandoned

i have so many errors in alertlog of my primary as you see in follow:
what is wrong
Errors in file /u01/oracle/admin/prod/bdump/prod_arc1_3812.trc:
ORA-03135: connection lost contact
FAL[server, ARC1]: FAL archive failed, see trace file.
Mon Jun 27 13:31:38 2011
Errors in file /u01/oracle/admin/prod/bdump/prod_arc1_3812.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Mon Jun 27 13:31:38 2011
ORACLE Instance prod - Archival Error. Archiver continuing.
Mon Jun 27 13:36:41 2011
ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Mon Jun 27 13:36:41 2011
Errors in file /u01/oracle/admin/prod/bdump/prod_arc1_3812.trc:
ORA-03135: connection lost contact
FAL[server, ARC1]: FAL archive failed, see trace file.
Mon Jun 27 13:36:41 2011
Errors in file /u01/oracle/admin/prod/bdump/prod_arc1_3812.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Mon Jun 27 13:36:41 2011
ORACLE Instance prod - Archival Error. Archiver continuing.
Mon Jun 27 13:41:54 2011
Thread 1 advanced to log sequence 31930 (LGWR switch)
Current log# 1 seq# 31930 mem# 0: /u02/oracle/oradata/prod/redo01.log
Mon Jun 27 13:41:55 2011
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
******************************************************************

/u01/oracle/admin/prod/bdump/prod_arc1_3812.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/oracle/product/10.2.0/db_1
System name: Linux
Node name: hoscodbsrv2
Release: 2.6.18-164.el5
Version: #1 SMP Thu Sep 3 04:15:13 EDT 2009
Machine: x86_64
Instance name: prod
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 3812, image: -----(ARC1)
*** SERVICE NAME:() 2011-06-16 13:02:52.559
*** SESSION ID:(319.3) 2011-06-16 13:02:52.559
Redo shipping client performing standby login
*** 2011-06-16 13:02:52.607 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
ABC: tkrsf_al_read: No mirror copies to re-read data
*** 2011-06-16 14:26:57.702
Redo shipping client performing standby login
*** 2011-06-16 14:26:57.733 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
ABC: tkrsf_al_read: No mirror copies to re-read data
RFS network connection lost at host 'prodstb'
Error 3135 writing standby archive log file at host 'prodstb'
*** 2011-06-16 14:27:01.890 62692 kcrr.c
ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
*** 2011-06-16 14:27:01.890 62692 kcrr.c
ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
ORA-03135: connection lost contact
*** 2011-06-16 14:27:01.890 60970 kcrr.c
kcrrfail: dest:2 err:3135 force:0 blast:1
kcrrwkx: unknown error:3135
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
*** 2011-06-16 14:27:52.209
Redo shipping client performing standby login
*** 2011-06-16 14:27:52.239 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
*** 2011-06-16 14:31:54.473
ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
*** 2011-06-27 14:54:49.152 62692 kcrr.c
ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
ORA-03135: connection lost contact
*** 2011-06-27 14:54:49.152 60970 kcrr.c
kcrrfail: dest:2 err:3135 force:0 blast:1
kcrrwkx: unknown error:3135
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
*** 2011-06-27 14:55:45.969
Redo shipping client performing standby login
*** 2011-06-27 14:55:45.999 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!

IDVD archive failing to capture all files

I understand the difference between saving a iDVD project vs. creating an archive.
I have a project that includes movie, photo and music assets. This project is archived.
When I open this archive in iDVD and then go 'Project -> Project Info', sure enough, assets are located in the 'my project Archived.dvdproj/Contents/etc' (i.e. in the package of the archive)
HOWEVER, one, just one photo from my iPhoto library is still located in ~/Pictures/iphoto_library !!!
Help, why is this archive incomplete ??
Thanks for any insights.
PAC

All,
I have solved this problem myself. It turns out the the photo that would not archive correctly was corrupted. The actual file itself had some form of corruption (and iPhoto showed its 'preview' but would not open that image itself for editing).
I deleted the photo in iPhoto, then replaced it from a backup and bingo, iPhoto could edit it and iMovie would archive correctly.
So : if iMovie archive fails to archive a file, check carefully that this file is present and opens correctly.
BB

Gmail, Mail.app and Archive Failing

One of my parents' macs fails to properly archive email messages. Gmail is acting as the backend, and I used the recommended imap settings from Google to set up the account. The error message is this:
"The IMAP command “UID COPY” (to Archive) failed for the mailbox"
Any ideas?

Take a look here: http://www.imore.com/how-to-gmail-2-step-verification-mail--iphone--ipad-mac

Abt RFC & FTP---- RFC to SAPFTP failed (urgent)

Hi all,
my program is working fine when i execute it in SAP GUI.
in this program i need to send some local file to FTP server from presentation server.
actually we have a scanner through which we can scan the barcode data from barcode label.this scanner is connected to sap test server through web console.
 so ,i can see the sap screen on the screen of scanner for this perticular transaction.
after scanning a barcode,the barcode data comes to scanner.when i execute this report on the scanner, it is showing the error---- RFC to SAPFTP failed.
 where as this same report is working very fine on the SAP server.it can send my file from presentation server to FTP server located at some other place.
 web console is installed so i can connect scanner to SAP for this perticular transaction through web.i think, to execute on scanner is same as execute on sap server.
 This error comes while executing a Function module FTP_CONNECT which is present in my program.
 can u please tell where is the problem?it is very urgent as they need in 1 day of time.
code is as follows.
FORM ftp_send using printer dir.
 data: user(64) type c value 'man',
 pwd(64) type c value 'post',
 host(64) type c value '172.160.122.30',
 cmd1(80) type c ,
 cmd2(150) type c ,
 cmd3(80) type c ,
 dest like rfcdes-rfcdest value 'SAPFTP',
 compress type c value 'N'.
data: hdl type i,
 key type i value 26101957,
 dstlen type i.
data: begin of result occurs 0,
 line(100) type c,
 end of result.
data:begin of tab_oline occurs 0,
 oline(200) type c,
 end of tab_oline.
describe field pwd length dstlen.
LOOP AT bt.
 CLEAR tab_oline.
 CONCATENATE
 bt-userid
 bt-zdate
 bt-seq
 bt-charg
 bt-batch
 bt-matnr
 bt-menge
 bt-lgpla
 bt-lifnr
 bt-lot_code
 bt-date_code
 bt-lead_nolead
 INTO tab_oline-oline SEPARATED BY ','.
append tab_oline.
endloop.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
 FILENAME = 'c:\pabi29.txt '
 FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
 DATA_TAB = tab_oline.
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear tab_oline.
refresh tab_oline.
call 'AB_RFC_X_SCRAMBLE_STRING'
id 'SOURCE' field pwd id 'KEY' field key
id 'SCR' field 'X' id 'DESTINATION' field pwd
id 'DSTLEN' field dstlen.
**Set FTP File Paths
call function 'FTP_CONNECT'
exporting
 user = user
 password = pwd
 host = host
 rfc_destination = dest
importing
 handle = hdl.
if sy-subrc ne 0.
message e020 with 'RFC connection failed'.
endif.
 DATA: zfilename(150) TYPE c,
 zfilename2(150) TYPE c.
 printer(5) TYPE c." value 'P0001'.
CONSTANTS: dir(50) TYPE c VALUE '\SAPuser\SAPfolder\'.
DATA: dir(50) type c.
select single pfolder from zkt014 into dir where printer = printer.
TEXT file name
CONCATENATE dir printer bt-userid bt-zdate sy-uzeit bt-seq '.txt'
INTO zfilename.
CONDENSE zfilename no-gaps.
Done filename
CONCATENATE dir printer bt-userid bt-zdate sy-uzeit bt-seq '.done'
INTO zfilename2.
CONDENSE zfilename2 no-gaps.
clear bt.
refresh bt.
concatenate 'put' '\pabi29.txt' zfilename
into cmd1 separated by space.
if cmd1 ne ' '.
call function 'FTP_COMMAND'
 exporting
 handle = hdl
 command = cmd1
 compress = compress
 tables
 data = result
 exceptions
 command_error = 1
 tcpip_error = 2.
IF SY-SUBRC NE 0.
message e021 with 'bar tender is not submited due to error in RFC'.
endif.
loop at result.
 write:/ result.
endloop.
ENDIF.
refresh result.
endif.
concatenate 'rename' zfilename zfilename2 into cmd2 separated by
space.
if cmd2 ne ' '.
call function 'FTP_COMMAND'
 exporting
 handle = hdl
 command = cmd2
 tables
 data = result
 exceptions
 command_error = 1
 tcpip_error = 2.
 if sy-subrc eq 0.
MESSAGE w044(zv).
ELSE.
message e019 with 'RFC ftp_command problem'.
 endif.
loop at result.
 write:/ result.
endloop.
refresh result.
endif.
if cmd3 ne ' '.
call function 'FTP_COMMAND'
 exporting
 handle = hdl
 command = cmd3
 tables
 data = result
 exceptions
 command_error = 1
 tcpip_error = 2.
loop at result.
 write:/ result.
endloop.
refresh result.
endif.
call function 'FTP_DISCONNECT'
exporting
 handle = hdl.
thanks in advance.
Regards
pabitra

Well may be the reason is that you are running report from SAP console.
SAPFTP is just an RFC destination which is actually pointing to an exe file on your frontend. filename is 'sapftp' and it is installed with your GUI frontend installation. May be while running through web console it is having problems accessing this file.
As a solution, why don't you use the rfc destination for the application server. It is called SAPFTPA. So instead of ws_download, you can save the file on application server through OPEN dataset ... ABAP commands. Than from application server ftp it using the same logic as it is in existing program. Just be sure to use the rfc destination SAPFTPA.
Hope this helps.
Cheers.

Regrdin file transer from al11 to archive directory URGENT

HI ,
my actual require ment is
in BDC inbound interface i have to read data from applcation server .i did that.
but now i have to send that file to archive directory after succefully reading that.
can anybody help on this
wt is archive directory?
how to send that application server file to archive directary after succesfull reading it? .......
is there any function module for this....
wt is archive directory?

Hi,
An archive directory is just a concept where one directory on the operating system holds files that have been processed. You don't need to do anything special, either take the internal table you already have and write it to a file in this directory or call an operating system command to move the file.
You just need to find out for your system which directory is the archive directory.
Regards,
Nick
P.S. Please consider the rules of the forum and do not mark your post as URGENT.

Adapter Framework Archiving Failed

Hi!
We are running XI 3.0 SP14, the J2EE WAS 6.40 Adapter Framework archiving is not working.
Table XI_AF_MSG that is accessed via JDBC as a Resource on WAS is oversized and can´t get archived, so it keeps growing.
As it is SP14, archiving should be handled by the DAS or Data Archiving Service available as a J2EE Container Destination (service) (this is an assumption, based on online documentation).
Deletes are completed OK and state is green, however, archiving jobs are not executed and are displayed with a red circle, job log says error is UNKNOWN.
Looking at the J2EE server logs I found an exception involving the J2EE_GUEST user, and a 401 response. I have no clue as about what is going on. Is there something that has been misconfigured? Maybe an authorization profile missing? I would really appreciate your help, there is no information available on logs or http responses so any clue will help me a lot.
Exception comes out as follows:
#1.5#0011435BCF03006100001E2500001ED0000414A34A212A74#
1148591462750#com.sap.engine.services.httpserver##com.
sap.engine.services.httpserver#J2EE_GUEST#0####f8cc27e0e
c3211da90870011435bcf03#output##0#0#Error#1#/System/Server
#Plain###User J2EE_GUEST, IP address HTTP request processing failed. HTTP error will be returned. The error is Access Denied.No details available.#
#1.5#0011435BCF03001E0000000500001ED0000414A354F6F268#
1148591644531#com.sap.aii.af.ra.ms.impl.core.archiving.
ArchivingJobExecutor##com.sap.aii.af.ra.ms.impl.core.
archiving.ArchivingJobExecutor.executeArchivingJob()
####cimdesxi_CXD_107111450#Guest#
ba8ff880ec0511da9fe40011435bcf03#SAPEngine_System_Thread
impl:5_58##0#0#Error##Plain###Could not cancel archiving
session.#
Thanks in advance,
Regards,
Juan M.

Hello,
If you find a solution for this, could you provide it ?
I have the same problem.
Regards,
Chris

Cisco PI 2.0 Configuration Archive fails Nexus 5000

Hi,
we recently upgraded Cisco PI from 1.3 to 2.0 and i thought this problem would be solved but it did not. I have added two Nexus 5548 switches that i can monitor and configure through Cisco Prime but im not able to read the running och startup config to the Configuration Archive. When i run the job i get the following error:
"fig from device: java.net.SocketTimeoutException: Read timed out"
Current NXOS: 5.2(1)N1(2a)
Before i proceed troubleshooting i just would like an answer if it should be possible to archive configs from Nexus to Cisco Prime Infrastructure?
Cheers! // Mattias Andersson

Thanks for the quick reply! Well, i did some more troubleshooting and i noticed that through Ethanalyzer and inspected the telnet packets that Prime tries to set the terminal lenght and width before it shows the running-config but it fails as it is in the default role of priv-0, and therefore gets % Permission denied. So, it times out after 2,5 min.
I added these two lines and worked like a charm!
role name priv-0
rule 12 permit command terminal length *
rule 11 permit command terminal width *

Archiver failed

hi champions
when i give archiver from v$instance it says failed
i am geting archive logs
but there is an error in alert log 19502.27072
os is suse
db is 10g

ARC1: Error 19502 Closing archive log file '/oracle/BP1/oraarch/1_2736_652213578 .dbf'
*** 2009-01-06 17:18:40.534 58670 kcrr.c
kcrrfail: dest:1 err:19502 force:0 blast:1
*** 2009-01-06 17:18:40.540 19934 kcrr.c
*** 2009-01-06 17:19:27.909
Exception 19502 encountered when closing file
ORA-19502: write error on file "/oracle/BP1/oraarch/1_2736_652213578.dbf", block no 1 (blocksize=512)
ORA-27072: File I/O error
Linux-x86_64 Error: 22: Invalid argument
Additional information: 4
Additional information: 1
Additional information: -1
*** 2009-01-06 17:19:27.914 60408 kcrr.c
ARC1: Error 19502 Closing archive log file '/oracle/BP1/oraarch/1_2736_652213578 .dbf'
*** 2009-01-06 17:19:27.914 58670 kcrr.c
kcrrfail: dest:1 err:19502 force:0 blast:1
*** 2009-01-06 17:19:27.921 19934 kcrr.c

Log Archive Failed via dbacockpit

Hi,
I've scheduled Oracle db log archive via dbacockpit. It failed at 1am, but it completed successfully later at 1pm as scheduled. So far, had 2 such occurences.
Any where to diagnose the intermittent error ? Please enlighten. TIA !
05.05.2009     01:00:29     Job started
05.05.2009     01:00:34     Step 001 started (program RSDBAJOB, variant &0000000000024, user ID BACKUP_USER)
05.05.2009     01:00:56     No application server found on database host - rsh/gateway will be used
05.05.2009     01:00:56     Execute logical command BRARCHIVE On host burger
05.05.2009     01:00:56     Parameters:-u / -jid LOG__20080926010000 -c force -p initprd.sap -sd
05.05.2009     01:02:09     SXPG_COMMAND_EXECUTE(LONG)
05.05.2009     01:02:09     COMMANDNAME = BRARCHIVE
05.05.2009     01:02:09     OPERATINGSYSTEM = ANYOS
05.05.2009     01:02:09     TARGETSYSTEM = burger
05.05.2009     01:02:09     DESTINATION = SAPXPG_DBDEST_BURGER
05.05.2009     01:03:46     External communication error at program start (see system log)
05.05.2009     01:03:46     SAPXPG_START_XPG_LONG: sy-subrc ne 0
05.05.2009     01:03:46     destination = SAPXPG_DBDEST_BURGER
05.05.2009     01:03:52     SXPG_STEP_XPG_START: execute_sapxpg: rc = 1,005
05.05.2009     01:03:52     SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1,005
05.05.2009     01:03:52     SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: x_error
05.05.2009     01:03:52     Job cancelled after system exception ERROR_MESSAGE
DL
Edited by: Desmond Lim on May 5, 2009 10:26 AM

Hello Desmond,
check the system log (SM21) as adviced:
05.05.2009 01:03:46 External communication error at program start (see system log)
Additionally check the trace of the according workprocess (ST11), ABAP dumps (ST22) and the brarchive log (DB12) too.
Greetings
Christian

Archiving failed

Dears,
On our Solman 7.0 server installed on Windows 2000 server and Database is Oracle 10g archiving is getting fail with error:
BR0279E Return code from 'E:\usr\sap\SOL\SYS\exe\uc\NTAMD64\backint.exe -u SOL -f backup -i F:\oracle\SOL\saparch\.aecgayms.lst -t file -p F:\oracle\SOL\102\database\initSOLar.utl -c': 2
BR0232E 0 of 34 files saved by backup utility
BR0280I BRARCHIVE time stamp: 2009-12-30 20.14.27
BR0231E Backup utility call failed
BR0016I 0 offline redo log files processed, total size 0.000 MB
BR0007I End of offline redo log processing: aecgayms.sve 2009-12-30 20.14.27
BR0280I BRARCHIVE time stamp: 2009-12-30 20.14.27
BR0005I BRARCHIVE terminated with errors
We take backups bt legato.
I have checked file system sizes and all things but every thing is fine.
Please suggest.
Shivam

BR0231E Backup utility call failed
Check your utility configuration
Regards
Nick Loy

Sync Archive failed LMS 3.2 using TACACS

Dear All,
Iam using LMS 3.2. In short, there is 2 type of router, 2800series and 2900series.
These device already join to TACACS server. When I try to sync archive I got:
- failed on 2900series
- successful on 2800series
I have doing same config (credential, snmp, protocol for sync archive), for those device on ciscoworks but why I find the error??

Usually it is essential to configure the $NMSROOT\objects\cmf\data\TacacsPrompts.ini file. As with tacacs+ Auth you can also define custom login username and password prompt, hence this file is important to be configured, only in case of Telnet not SSH.
So just check the login prompt you get in your device when you try to do telnet and mention the same in you
TacacsPrompts.ini file.
Example:
>Following is the content of TacacsPrompts.ini :
[TELNET]
USERNAME_PROMPT=
PASSWORD_PROMPT=
> Following is the username and pasword propmt for my device :
> As per this please modify the file as :
[TELNET]
USERNAME_PROMPT=Username:
PASSWORD_PROMPT=Password:
Just save and try to run the job again for failing device.

Dala load failed - urgent

Hello Friends,
I am loading the data from Informatica sys to BW. It is running through process chain.
Due to some problem in Informatica I have not received any trigger to BW from last 12 hour which is always used to get after every 4 hrs.
Loading of master data infopackage is failed and I not able to understand the error as well. I have checked source sys connection and it is ok.
Error I am getting only error message RSM799 .
Detail error from monitor screen
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is
documented in an error message.
System response
The error message(s) was/were sent by
So please consider this problem as urgent and help me.
Regards,
Jain

Hi,
Check for more information with Tcodes ST22,SM37,SM21,And also see the long help on the error(in monitor).
With rgds,
Anil Kumar Sharma .P

Archiver failing -- Urgent

Similar Messages

Maybe you are looking for