Archiving and Deleting of XML Messages in SAP NetWeaver PI 7.31 single stack

Hello my XI friends!
Need step by Step Guide to Archiving
and Deleting of XML Messages in
SAP NetWeaver PI 7.31 single stack
Similar to these instructions
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?quicklink=index&overridelayout=true
Regards,
Rinaz

Please check the below blog for archiving java only-(XMLDAS)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2011/11/16/aae-archiving-in-sap-pi-711-with-xmldas
For deletion there is standard delete job..
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/48/b2e0036b156ff4e10000000a42189b/frameset.htm
Message was edited by: Hareesh Gampa

Similar Messages

Reg : Reprocessing of failed messages in SAP PI 7.3.1 Single Stack

Hi All,
          I am working on FILE to IDOC Interface. I have encountered a new problem today.
          When we started testing this interface, the message were failing at the IDOC Adapter.
          When I debuged the error, I found that, we were passing chars for a Date Field in IDOC.
           I updated the mapping on the same and when I tested the Interface it works fine end to end.
          However when I want reprocess the failed message from monitoring, the failed messages are being reprocessed from the point of failure and not from the beginning of Pipeline
          Since the changes are made at the mapping , none of failed messages are being processed.Did any face the same issue and how did u guys resolve it. Can you please help me on this.
Thanks
Siva

Hi Siva
That is the correct behavior in PI. Reprocessing of failed messages are always restarted from the point of failure and not the beginning of the pipeline.
If you want the messages to start at the beginning of the pipeline, you need to resend them, in your case, put the file in the source directory.
Rgds
Eng Swee

Archive and delete sap event management objects

Team, I need to configure the archiving objects and residence time to Archive and delete EM objects. there are three steps of configuration, and I have never done this before.
Can any one of you help me in setting up this config and the programs that need to run to archive and delete these objects.
I would really appreciate you help and quick response on this.
Define Archiving-Object-Specific Customizing
Define Residence Times for Archiving or Deleting
Define Settings for Deleting Document Flow
Thank you!!!

Hello Steffen,
I was told that it would be possible to display archived and deleted event handlers using BAPI /SAPTRX/BAPI_EH_GET_DATA_GEN. I tested it, but could not verify this statement. SAP Help reads:
"The archiving object /SAPTRX/A0 only supports a technical view in the Archive Explorer of the Archive Information System. This view is similar to the display in transaction SE16."
It would be great if you could help clarify this. Thank you!
Best regards,
Philiipp

PI 7.11 AAE- Archiving and deletion

Dear All,
I just want to get confirm on my understanding regarding AAE archiving and deletion.
We have 98% interfaces using only AAE in our landscape.
I had set up XMLDAS archiving for AAE ( After fixing so many issues ) which archives the AAE messages into the local file system. So no issues in that .
Now my requirements are,
1) I would like to keep only 7 days of data in the database and 100 days of data in the file system
2) I do not want to set up any rules for Archiving /Deletion. It means i would like to archive messages older than 7 days in the file system.
The steps are ( My understanding )
1) Set the persistence duration in NWA to 7 days . So only 7 days of data will be stored in table BC_MSG.
2) Set up the archival job in the background processing through RWB without ANY RULES. So all processed messages older than 7 days will be achieved in the file system. And Archive will come with default delete procedure as well hence Archived messages will be deleted from table BC_MSG.
3) Deactivate the delete job . If i have the active delete job in the background processing, it will delete all messages older than 7 days which i don want. The deletion of messages from BC_MSG will be taken care as part of archival job.
Is my understanding correct?
Thanks
Rajesh

Hello, any know what did they do to delete the files from the file system after 100 days?
We have the same problem, when we deleted manualy some messages from SO AIX but they still appear from the RWB, and when we clic over them we get an error: ...... java.lang.Exception: XML DAS GET command failed with ErrorCode: 598; ErrorText: 598 GET: Error while accessing resource; response from archive store: 598 I/O Error java.io.FileNotFoundException: /usr/sap/PID/javaarch/archive/usr/sap/pid/x
Is there any way to delete messages without generating errors / inconcistencias?

Archiving and Delete Job

Hi,
I having problem in PI 7.0, SXMB_MONI XML Messages does shows only 1 day, Messages, I understand there are 2 jobs are running in background
Job: SAP_BC__XMB_DELETE Program: RSXMB_DELETE_MESSAGES
Job: SAP_BC_XMB_HIST_DELETE Program: RSXMB_DELETE_HISTORY
These jobs are running every 6 hrs.
Is that can I change the job time like delete messages every 1 or 2 weeks, is that my problem will be solve, or should I do someitng else... please tell me
Thanks in Advanced
Angeline Purnama

Hi Angeline,
Define the retention period for archiving and deletion in SXMB_ADM ->Define Interfaces for archiving and retention periods.
Re Shcedule the jobs using SXMB_ADM ->Schedule Archiving Jobs and Schedule Deletion Jobs.
Then check if the messages are getting deleted.
Revert if it works.
Regards
RAGHU

Any RFC To Archive and Delete IDOC from XI?

hi,
Is there any standard RFC available which archives and deletes the IDOC?
In my scenario i have to delete the IDOC that has successfully transmistted an IDOC to a SOAP Receiver.
client's requirement is to delete the IDOC immediately instead of running a SAP batch program scheduled sometime later.
Let me know if there is one.
Thanks,
Tirumal

Vijaya -
I completely understand that scheduling the report every on a timely basis is the best way.
But you know if i were the manager i could have taken decisions but since i am not i have to do what the client says. No other way.
We will see.
Thanks for your patience and helpful answers.
- Tirumal

Issue: Archiving and Deleting completed Processes from GP Administration

Hi
IWe want to delete the completed processes from every users "Completed Processes' List. For this ,
In GP administration-> Archiving and Deleting-> Maintain Process templates->Global Settings,
We set 1 day for completed tasks.
So , after one day,will it remove all the completed processes or only the processes which were completed after setting the Archiving in Global settings?
How can I delete all the completed Processes?
Thanks
Smitha

Hi Smitha,
Basically, there are two ways in which you can delete processes in GP administration-> Archiving and Deleting:
1. automatically, through the Maintain Process Templates option
2. manually, through the Begin Archiving option - there you have to ignore the predefined settings and set a date before which you want to delete processes.
You should delete manually all processes up to now that were not deleted by the automatic scheduling. After that, all newly completed processes should be deleted promptly as you have specified in the global settings.
Make sure that you also perform the appropriate settings for the archive store and the home path.
You can check the documentation at: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/be/67a53d874f46c4b9a25e6e7d16a243/frameset.htm">Process Archive Management</a>.
Regards, Petja

What is data archiving and DMS(Data Management System) in SAP

what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PM

Hi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards.

Archiving and deleting of equipment master data in plant maintenance module

Hi,
Can anyone explain me the process to archive and delete the equipment master data in PM module using archiving tools.
I tried doing it thru t-code SARA, would be grateful if anyone can help me with the steps to follow to archive the equipment master data.
Thanks in advance,

Many thanks for your reply,
I tried doing the same in IDES, but unfortunately the archive file is not getting generated when i write it. I have clearly specified in the variant to create an archive file. Can you please explain how does the system generate an archive file. And also in the customizing " Archiving Object-Specific Customizing " techincal settings, i have maintained the production variant and have marked start automatically.
Please advise,
thanks again ,

Inside mail, how do you find and delete old useless messages

inside mail, how do you find and delete old useless messages, there are thousands of them.

go thru all your mail boxes, and delete, all your synced boxes, highlight the stuff you want to trash, click delete.
Go thru all the boxes and do the delete, then go to your server trash, and delete.
You canthen go to on my mac and do the same thing.
This is way different than 10.6.8, and I'm sure there is a much better way to do this, but at least it will get rid of some junk.
Sorry this all I can offer.
I'm sure someone who has been working with OS can offer a much better path.

How to archive and delete messages in SXMB_MONI

Hi all,
We are working on SAP XI Development environment wherein we have File to IDoc scenario running twice daily and creating many messages.
How to archive and then delete these messages ?
Does accumalation of past messages affect the speed and performance of the system?
Thanks in advance.
Ajay

Ajay,
For step by step procedure of how to archieve and delete messages in XI go through the urls:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Delete Messages SXMB_MONI
http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Too many questions on Archive/Delete messages.
---Satish

PI Message Archive and Delete

Hi Guys,
How will check PI messages whether particular messgae we can do ARCHIVE or particular message we can DELETE ?
Can any one one pls help me on this how to check in PI.
Thanks,
Siva.

Hi Siva,
In SXMB_ADM (t-code) >>> Define Interfaces for Archiving and Retention Periods.
Mention all the interfaces for which you intend the archive the messages.
Click on Multiple Selection>>>> Select all required interfaces >>>> Press F8.
All interfaces will apprear under u2018Interfaces to Be Archivedu2019. Messages of all interfaces that are excluded here will be marked for deletion.
Regards,
Naveen

Triggering and view XML messages in SAP AMI

We have configured the AMI. Also setup the AMI enabled devices.
We have created Meter Reading Orders for the periodic meter reading as bulk .
But the creation of MROs does not trigger creation of XML messages.
We found the Enterprise Service responsible for meter reading order Request Smart Meter Meter Reading Document Creation as Bulk SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out
But the XML messages are not getting generated on MRO creation. Also no XML message generated on AMI enabled device creation. Would like to know where we can view the generated XML and also trouble shoot.
Thanks in advance for the information
Vijay

Hi,
Thanks a lot for the informaiton , I could go into SXMB_MONI with date and time stamp to view the XML message, still i am not able to view it.
Is there any thing specific needs to be configured to have the XML message in SXMB_MONI
The process we are following is we are creating periodic meter reads and using the transaction ELMU Customized to our needs to trigger the SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out . Are we following the right approach.
Can you provide the check points.
thanks,
Vijay
Edited by: vijay gunti on May 26, 2010 8:39 AM
Edited by: vijay gunti on May 26, 2010 8:46 AM
Edited by: vijay gunti on May 26, 2010 8:49 AM

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

How can I transfer all my photos on iPhone to iCloud for archive and delete them off my phone?

I do not want to simply backup my phone with iCloud. My iPhone's memory is full and I would like to transfer all my 10,000+ photos to iCloud for safe keeping, and delete them off my phone. Could I do that? I know that iCloud is typically used for backing up the phone and works like a 'mirror' to the phone, but I want to use it more as an archive drive. Please advise!

The only iCloud feature that meets this requirement is the iCloud Photo Library (Beta). I don't think that I would trust all my photos to a Beta-level product.
You could create a Dropbox Account and move the photos to it or move the photos to your computer.

Archiving and Deleting of XML Messages in SAP NetWeaver PI 7.31 single stack

Similar Messages

Maybe you are looking for