Archiving Error X12 files

Hi,
My scenario has the input X12 files mapped to orders idocs. We are using Seeburger conversion modules in the File Adapter to transform the X12 files. When there is any error in the conversion of the X12 file, it throws an exception. Is there any way to archive this file into an 'Errors' folder, so that the adapter can continue processing the rest of the files? Currently, the processing is stuck till the faulty file is manually removed from the folder. Any help in this regard, is greatly appreciated.
Thanks,
Geetha

Hi Geetha,
Check the sender file adapter(seeburger)..processing mode:
select archieve fualty source file, mention the path where it has to put the files.
You can later on check the folder and process the error files.
Alternatively,
Adapter module can be created if any attachment has to be retained.
Regards,
Sushama

Similar Messages

Error with Archiving Faulty Source File in Sender FTP adapter

Hi All,
I have configured a Sender FTP adapter with Processing Mode as Archive.
I am able to read the files from FTP server and archive all the successfuly processed file in the PI aplication server directory XXX/success.
We need all the error files also to be archived on PI application server in directory XXXXX/Fail so I have checked the option Archive faulty Source Files and provided the application directory XXXXX/Fail .
I have unchecked the option Archive Files on FTP server.
But the problem is when FTP adapter is getting any error files it is not able to archive it to application directory XXXXX/Fail .
In RWB it is showing the error
Unable to archive faulty input file /data/abc.txt to /XXXX/fail/abc.txt
Cause: com.sap.aii.adapter.file.ftp.FTPEx: 550 rename: No such file or directory
This directory is existing and works fine when I give this directory name in Archive directory of processing mode.
Sender FTP adapter is trying to archive the file in FTP server which I dont want and giving us this error.
If I give any Directory which is present in FTP server my error files are getting archived on FTP server but not in the archived folder.
I have already unchecked the option Archive Files on FTP server.
Please help......
I am on PI 7.11
Regards
Henery H

Hi Henery,
Check the below thread, this should help you to fix the issue.
FTP adapter: exc. 550 : No such file or directory
Thanks,

File Adapter - Error creating archive directory adapter file

Hello,
I've a interfase File to RFC. In sender CC i have Archive Directory.
It occurs the follow error:
Error creating archive directory adapter file
The archive directory exists.
any idea?
thanks very much

Hi Silvia,
Check whether the user you are using for FTPing is having proper authorizations.
Also, verify whether you have the archive directory in place.
Regards,
Neetesh

Archive Error file in PI

Hi frnds,
I have a requirement which says we need to archive a file when it is in error in PI. How can we acheive this as we need to move error file into a specific folder.
Any Suggestions.
Thanks,
Prabhas

Hi Prabhas,
You need to use the option of "Archive faulty Source Files" in the processing tab of your Sender Communication channel.
Open your sender comm. channel --> goto the Processing tab -
> In processing parameters you will find an option
"Archive faulty Source Files " , check the corresponding checkbox -
> then you will get another parameter " Directory for Archiving Files with Errors" ---> Here you need to specify the path of the folder where you want to move the error file to archieve it.
Hope this will help you
Regards,
Rohit

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

Access denied. Error in File C:\WINDOWS\TEMP\

I have searched on Google and all over this forum and none of the solutions have fixed my problem.
Crystal Version: Crsytal.Net for Visual Studio.Net 2005
Server: Windows Server 2003
Error:
Access denied. Error in File C:\WINDOWS\TEMP\JuryDutyReport {D6296178-3E72-483E-B876-2DFC03D00841}.rpt: Access to report file denied. Another program may be using it.
When I run my app locally through the Web Server that comes with ASP.Net, everything is fine, it is only when I deploy the application to the Windows 2003 Server that I get the error.
I'm using impersonation in my ASP.Net application. I have given that domain user full access to 'C:\Windows\Temp'', the export folder and even the folder where the Crystal Report resides on the Server. When I run the application on the Web Server, I actually see the ".rpt" get created in the "C:\Windows\Temp" folder but yet it still says there is a permissions error.
What is bizarre is that the code below that just sends the file to the printer automatically works:
private void PrintJuryDutyReport(DataSet ds)
        //create report document
        ReportDocument crDoc = new ReportDocument();
        //load, set datasource and print options
        crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
        crDoc.SetDataSource(ds); //set datasource
        crDoc.PrintOptions.PrinterName = ddlPrinters.SelectedValue.ToString(); //set printername
        crDoc.PrintOptions.PaperOrientation = PaperOrientation.Portrait; //set paper orientation
        crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
        crDoc.PrintToPrinter(1, false, 0, 0); //send to printer
I have to change the code to export to a PDF and this code doesn't work:
    private void PrintJuryDutyReport(DataSet ds)
        //report document
        ReportDocument crDoc = new ReportDocument();
        string myfile = @"G:\COPFS\COPFSPROD\ReportsTemp\MyPDF.pdf";
        //load, set datasource and print options
        crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
        crDoc.SetDataSource(ds); //set datasource
        crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
        //export through http
        crDoc.ExportToDisk(ExportFormatType.PortableDocFormat, myfile);
        crDoc.Close();
        crDoc.Dispose();
        Response.ClearContent();
        Response.ClearHeaders();
        Response.ContentType = "Application/pdf";
        Response.AppendHeader("content-disposition", "attachment; filename=" + myfile);
        Response.WriteFile(myfile);
        Response.Flush();
        Response.Close();
Any help is greatly appreciated as I have to present this to end users tomorrow.

Don, thanks for the response.
As a last ditch effort, I granted "modify" to the Network Service Account on C:\Windows\Temp and that fixed the error.
There are two things that are troubling about this:
1) I'm impersonating a domain user in my ASP.Net application and when the PDF is created, the owner is that domain user, so I know impersonation is working. So I wonder if ASP.Net picks and chooses what account it runs under at different times?
2) It is a little scary for the Network Service Account to have this access but that people seem to be fine with it.
http://aspadvice.com/blogs/rjdudley/archive/2005/03/14/2566.aspx

Archiving old TM files--new TM disk

I'm moving my TM setup to an NAS drive. I originally wanted to use the NAS for iTunes, but that was too problematic and I discovered you can't back up an NAS drive to TM. So, I'm moving my iTunes folder to my old TM drive (USB external) and using the NAS for TM backup. I'd like to archive the backup files from the old USB drive, at least for a while, but I get error messages when I try to copy them. An example is "The item 'backups.backup.db' can't be moved because 'imacbackup' can't be modified". ('imacbackup' is a folder I created on the NAS.) I get other error messages when I try to copy the folder to the iMac itself. Is there something funky about the TM files that make them unmoveable? Thanks!

I doubt Disk Utility will even work on a NAS. But CCC should. If it doesn't provide access to a NAS then you'll need to try something that will such as:
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Or I don't see why you couldn't use the TM application to restore data to the NAS.

Archiving faulty Source file not working in Sender Adapter FCC

Hi Experts,
I have enabled "Archiving Faulty Source File" in Sender Adapter FCC and pen down the directory path accordingly.
Likewise I also enable the processed mode as "archive" and give it the direcotory path.
However when there is a error flagged in sxmb_moni for this interface, I unable to see any file created in the error folder but I can see a file with timestamp being created in the archive folder.
I have checked the access right to the directory, so this is not an issue. I ran through the forum on this subject and come across the help.sap note on the following
" To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: MessageTransformBean, Migrating Dispatcher Classes
○ Specify the Directory for Error Archiving.
○ To add a time stamp to the archived file, select Add Time Stamp. "
What is the definition as "permanent error". The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
Anyone have any such setting enabled and working ?
Regards
FNG

The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
No, it is not the case. As mentioned on the SAP Help site, for the faulty file to be archived, the error has to occur in content conversion, or in module processor.
If the error you are getting is in MONI, then it means syntactically the file is correct and hence adapter engine has picked up and sent to integration engine (SXMB_MONI).
-Supriya.

How to enable the Archive faulty source file in File adapter

Dear XI expert,
I want to enable the Archive Faultly source file, when the exchange step detects any error then move the source file to the ERROR folder.
I've already applied patch XI ADAPTER FRAMEWORK CORE 7.00 SP10 but haven't seen anythings about this function.
Best regards,
Kobsak

Hi,
Check out this link for info on how to archive the file.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Vikram

Archive Faulty Source File

We have an issue in moving the faulty source files to a particular directory.
We could move all successfully processed files to an archive directory, but not able to move the error files (having some data issue) to another archive directory, so that we can continue with processing of other files.
Module used:
AF_Modules/MessageTransformBean --> 1
Parameter:
Transform.PermanentErrors --> true
But this is not working.
I see a similar thread which is not answered:
Re: Archive Faulty Source File
Your inputs are appreciated.

I actually have two scenarios:
1. Asynchronous
2. Synchronous
In Asynchronous; best part is, all files are getting processed, in spite if there are any erroneous files in between, at least it continues with next file. My problem here is, it archives all successful and error files to the same Archive directory; though I have mentioned different directory for u2018Faulty Source Fileu2019. And there are no errors when I see in the CC monitoring. But there is error in sxmb_moni (actually I have failed it intentionally)
Runtime exception occurred during application mapping com/sap/xi/tf/_CreateProductMaster_to_CreateProdu~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The element type "Products" must be terminated bythe matching end-tag "</Products>".
In Synchronous: If there are any error files in between: it never go to the next file, it is stuck in the same file and retries the same. And error in CC monitoring is:
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Application:EXCEPTION_DURING_EXECUTE:
In sxmb_moni
Runtime exception occurred during application mapping com/sap/xi/tf/_CreateProductMaster_to_CreateProdu~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The element type "Products" must be terminated bythe matching end-tag "</Products>".

Unzip the file archived by the File adapter

Hi Experts,
we have a scenario where we are archiving a xml file using the File adapter and also it is being zipped by the OS command.
the script not only zips the file, it also rename the file from *.zip to *.xml.
Hence after archiving when I am trying to open it, the content appears to be junk.
Please suggest how to unzip the file as it got a extension *.xml.
And I also tried renaming the file to *.zip and then to uncompress, but it shows below error
Cannot open : it does not appear to be a valid archive
Thanks in advance,
MK

hi Mk,
instead of using OS command try using the exesting module provided by the SAP, so your job will be easy.
follow this steps in the module processing for UN ZIP
Processing sequence:
Module name: AF_Modules/PayloadZipBean
Type: Local Enterprise Bean
Module key: 3
u2022 Module configuration:
Module key: 3
Parameter name: zip.mode
Parameter value: unzip.
in the commincation channel specify filename.xml
so you can open the file in XML format
Thanks,
Madhav
Note:points if useful
Edited by: madhav poosarla on Aug 14, 2008 8:31 AM

ORA-00257: archiver error.

Hi Experts,
Again, I need you expert opinions on the issue I'm facing in my EBS production database.
My database is up and running but I see loads of ORA errors in my alert log file...
Content of alert logfile:-
ORA-16038: log 1 sequence# 8950 cannot be archived
ORA-19502: write error on file "", block number (block size=)
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16014: log 1 sequence# 8950 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16038: log 1 sequence# 8950 cannot be archived
ORA-19502: write error on file "", block number (block size=)
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16014: log 1 sequence# 8950 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16038: log 1 sequence# 8950 cannot be archived
ORA-19502: write error on file "", block number (block size=)
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16014: log 1 sequence# 8950 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
ORA-16038: log 1 sequence# 8950 cannot be archived
ORA-19502: write error on file "", block number (block size=)
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01a.log'
ORA-00312: online log 1 thread 1: '/mnt/PRDdata/trcprd/redo01b.log'
Also my Workflow mailer has stopped with this error:
" ORA-00257: archiver error. Connect internal only, until freed.. "
The first thing I did after this error was to check the archive destination space
SQL> archive log list;
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            /mnt/PRDarchive/trcprd
Oldest online log sequence     8960
Next log sequence to archive   8960
Current log sequence           8962
SQL> !df -h /mnt/PRDarchive/trcprd
Filesystem            Size Used Avail Use% Mounted on
/dev/mapper/oracle_archive-oracle_archive
                       99G   94G   59M 100% /mnt/PRDarchive
I removed some of the old archives which were already backed up to release some space, and ran
1. crosscheck archivelog all
2. delete noprompt expired archivelog all;
2. crosscheck archivelog all;
Meanwhile my database was scheduled for a hot backup, and it failed with the below error:
The log file says:-
RMAN-03009: failure of delete command on dsk_9 channel at 10/25/2013 23:59:49
ORA-19606: Cannot copy or restore to snapshot control file
Please tell me how do I troubleshoot to know the root cause behind all these activities and how do I fix it.
Your response will be highly appreciated.
DB Version - 11.2.0.3
OS Version - RHEL 5, 64bit
EBS Version- 11.5.10.2
-Thanks

Hi,
ORA-16038: log 1 sequence# 8950 cannot be archived
ORA-19502: write error on file "", block number (block size=)
Please confirm that after you have released space for archive logs, do you still get the errors that were before reported in the alert log file? And what is the current output of:
df -h /mnt/PRDarchive/trcprd
RMAN-03009: failure of delete command on dsk_9 channel at 10/25/2013 23:59:49
ORA-19606: Cannot copy or restore to snapshot control file
Please refer the following for cause and solution:
ORA-19606: Cannot copy or restore to snapshot control file, RMAN-06214
https://forums.oracle.com/message/3931860
Thanks &
Best Regards,

Processing Mode = 'Delete'; Archive Faulty Source Files; Add Timestamp ?

XI3.0 SPS 19
For FTP Sender adapter, if Processing Mode is Delete, and you want to Archive Faulty Source Files with an added timestamp, it does not work (meaning it does not archive the faulty source file at all).
Any suggestions?
If I change the processing mode to Archive, it works. But my requirement is to archive only faulty files after adding timestamp and the source files should be deleted if processed.
Thanks
JB

Hi james
If you are using FCC or Modules then only Faulty files will be archived.
The error that works with this should be a permanent error of file like field missing or compulsory field etc.
if i understand correct you are trying to use Archive faulty messages in delete mode and you have FCC right ?
I have also seen this behavior in delete mode it File adapter never archive. So it wont archive the faulty file as well.
Thanks
Gaurav

Invalid Zip archive error

I've downloaded Oracle 92010NT_Disk2.zip, when I try to unzip, it gives me an invalid archive error.

Generally, this happens because the FTP connection was dropped mid-way through downloading. Download the file again and it will probably work.
Note that the download page indicates the size of the files. You want to make sure that the files you download are the same size as the web site indicates they ought to be.
Justin

Windows Failover Cluster (Errors retrieving file shares)

I'm having an issue with Windows Failover Cluster with a Windows Server 2012 R2 machine. I have two cluster nodes (nodeA and nodeB). My issue is that when nodeA is the owner node, and I open failover cluster manager <clusterName> >>
roles >> <fileserver role> >> shares tab it will hang and say that it is loading, but this will occur infinitely. Although when I go to nodeB (not the owner node) and I go to shares it will show me all of the shares that I have. Next when
I go to <clusterName> >> Nodes >> click on Roles tab the information says "There were errors retrieving file shares."
Now when I switch the nobeB to the owner node, I cannot view the shares on that machine but can now view them on nodeA.
We alse have a test network where I have recreated the machines, environment and the failover cluster to as close as the production network as I can except everything works great in the test network

For anybody searching on this later...
I was getting "There were errors retrieving file shares" no matter which node of my cluster
owned the fileshare service. Turns out my problem was that my servers don't have internet access and I had set a system proxy. The fix described in the link below was to exclude the local domain from the proxy.
http://blogs.technet.com/b/askcore/archive/2012/12/03/cluster-aware-updating-cau-interaction-with-proxy-servers.aspx

Archiving Error X12 files

Similar Messages

Maybe you are looking for