Archiving Inspection Lots – Status ARBL
Hi
I’m busy setting ARBL status on Inspection lots using program RQRQAB00.
These Inspection Lots are very old but all of them contain status UD or LTCA.
The problem I’m facing is that Inspection Plan was deleted resulting in message “Inspection plan xxxxxxx does not exist” (Message no. QA318) when displaying these Inspection lots.
Program RQRQAB00 does not issue a clear message for not activating status ARBL. Only reason I can think of is above message (QA318).
What would be the easiest solution to activate ARBL?
Best regards
W
Hi Werner,
You can set ARBL by using SARA transaction and using object QM_CONTROL.
Please create a variant and schedule a job in background.
You need to execute Pre processing job to make lots ready for archiving and put them in status blocked for archiving.
Please check the pre-requisites for creating the inspection lot:-
An inspection lot can only be archived if:
· The inspection lot has been cancelled, or if a usage decision has been made.
· If the last change to the usage decision was made before the retention duration.
· All stock has been posted for a stock-relevant inspection lot.
· If the inspection lot is not used in any of the following data records:
¡ Production order header
¡ Delivery note item
¡ Transfer requirement item without a “delivery completed” indicator.
¡ Quality level
Use the following link for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e606e462a11d189000000e8323d3a/content.htm
BR
Rahul
Similar Messages
-
Archiving inspection lots problem
Hi Gurus,
I'm archiving inspection lots of goods receipt, when I executed the preparation program, inspection lots with the following status were not affected by the program, status: LTIN STIC SPCO CLQM STUP.
I thought that may be the presence of long term inspection characteristic, is affecting the process, beside that there was status INSP which is inspection active, so I closed this characteristic, saved the UD and got this new
status: UD ICCO SPCO CLQM STUP. I waited till the residence period ends and executed the preparation program, but it is still not setting the status ARBL for the lots.
Does any body have a solution ?
Regards,
MahmoudThat doesn't really surprise me. Whoever designed the coding for SAP probably never considered that someone would want to archive just one inspection lot. So they probably didn't test it for just one variable being passed. More then likely somewhere in their code they wind up with a starting (or ending value) but a null value for the other side of the range. It was probably never tested for hence not trapped for.
Kind of a bug but then again, not really.
Thanks for sharing the solution!!!!!
Craig -
Table for Inspection Lot status
Hi,
In which table is the inspection lot status stored?
Kindly suggest.Bapi
BAPI_INSPLOT_GETSTATUS
Tables
JEST
TJ02T
1. Goto table QALS with PRUEFLOS = inspection lot
2. Goto table JEST with OBJNR = QALS-OBJNR
You will receive one or more records of status. Then - table TJ02T. -
Inspection Lot status not getting changed to LTCA from REL for SubCon scenario
Dear All,
For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
Has anybody faced such issue? Is this standard SAP?
Kindly throw light on the process, is correct process followed?
Regards,
Tanuj ParikhThanks.
Thru MBST Inspection Lot status changed to LTCA.
Why system is not cancelling thru MB01? -
Inspection Lot Status (CROK)not updating for Certificate Reciept
Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
QM Procurement : Checked
Control Key :0005
Certificate Type :YA72
3) Goods Recipt
MIGO < Purchase Data<Cert Reciept :Yes
Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advanceIs the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents. -
Inspection lot status to be fetched into BW
Hello,
First of all; I am aware that, there are many forums/discussions with regard to fetching of Inspection lot status. I have gathered the points as well.
Our requirement is to, to extract the Inspection lot status into BW as we are already staging the Inspection lot numbers.
I got 2 ways to do this,
1) There is a BAPI FM in ECC to get the Inspection lot status. "BAPI_INSPLOT_GETSTATUS".
2) Else, we can take QALS-OBJNR & pass it to JEST to get the status numbers. And this needs to be passed to TJ02 for descriptions.
However, I have doubts about how to extract this status into BW. (As I need to filter out the status' LTCA, CRTD, ICCO).
1) Can we have an extractor based on the Function module & get data into BW? Is this possible, because since it is a BAPI FM; I wanted to have a clear picture on how to get it.
2) Can I build a view on top of JEST & TJ02; And apply selection conditions of whatever is necessary & extract it into BW?
And I don't want to stage the complete data in BW side for JEST & TJ02, as I noticed that there is uncertainly huge amount of data in JEST.
So, any inputs on how to stage the status into BW will be very helpful for me. Please let me know, if I have missed out any documents/links regarding the same.
Thanks again,
Vikranth.Dear Madhav
Here is my approach for this requirement
1) Create infoobject for each of the status you required for the inspection lot. (It can be flag indicator kind of info object
2) Make these status navigational attribute of Inspection lot infoobject
3) Create a generic datasource on QALS . You can use createdon and changedon so as to manage a pseudo delta. Append the datasource extract table with Z fields required to capture your Inspection lot status
4) Write a Exit in the source system to fetch up the status field for each inspection lot from the JEST table. You can hardcode the status field for eg If Qlot has status I0002 then mark the corresponding append field with X.
5) Map the append datasource field to the Inspection lot info object through transformation.
Hope its clear for you
Regards
Gajesh -
Inspection Lot Status UD ICCO SPCO ORRQ
Hello Experts,
Please share your thoughts on the System Status "UD ICCO SPCO ORRQ". Not sure on why the Lot getting the status ORRQ "Order record required"
What is the Condition in which the system triggers this Status? how to complete the inspection processing once we get this status? Is it a Particular Configuration setting that expects a Process Order Record?
Is there any setting in Production that sets the Inspection Lot status as ORRQ.
Appreciate your quick response.
Regards
Rajahi,
Check ur MM- QM view whether QM order is assigned or not. if QM order is assigned then process your order and confirm it and provide the settlement also against that order. Or check any other order is opened against that lot or not Like PP order or PM order which is controlled by ur QM- status profiles.
once ur order closed technically ur inspection process completed.
Regards -
Hi,
As per SAP to trigger the Work flow WS03100078, Inspection lot status needs to be CROK. How the CROK status will be active for Inspection lot. As per our scenario, Inspection will gets created automatically when Goods receipt against purchase order.
Please help me
thanks in advance
regards
stallinHi Stallin,
The Status CROK is updated when you confirm the certificate receipt while doing GR in Purchase Order Details in T.code MIGO and update the same as certificate received in the Tcode QC51/52 for the relevent purchase order/Inspection Lot.
Reward if cleared and close the thread. -
For the Inspection lot status is CRTD instead of REL status
Dear Experts,
Today I have observed strange behavoir of the system.
For the Finished material 04 insp type, Every day we used to generate inspection lots automatically with MB31for 101 mov type.
generated inspection lot status will be REL bydefault. Today we observed system status is CRTD.
I have checked any material master/Inspection plan been change or not, but it was not changed.
Please suggest how this behavior happen suddenly.
Regards
DonDear Don,
Check in SPRO for inspection type configuration. Some body has changed the 'Task list usage' for Inspection type.
If you are using '1' and if there is other one except '1' then system will create inspection lot in CRTD status.
You need to change it manually in QA02 and assigne plan.
Thanks and Regards
Harriesh. -
QM-SD: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
SD-QM: Sales Return Inspection lot status Error
Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status ErrorDear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh -
Assignment of task list after the inspection lot status is released
Hi,
I have applied a user status with which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
please help me.
Regards
Vivek DeshpandeHi,
Key date is same. I have checked for it.
What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
Can i do this ? Please help
Vivek Deshpande -
Inspection Lot status maintenance
HI QM gurus,
Please anyone can help me regarding printing of COA for inspection lot.
I want to print COA before UD .I am using transaction QC21. While printing COA before UD it is giving me status error. Please guide me to maintain the status of inspection lot which does not restrict printing COA even if UD is not made.
Thanks in advanceHi
Please check your print program with the help of developer. In the program you have to exclude inspection lot status for printing.
regards
Srinivas -
Archive inspection lot:-LTIN STIC STUP
Hi there
Issue: The system is not considering the inspection lots for archiving if i changed the status from "LTIN STIC STUP" to "UD ICCO STUP" .
When i ran in test mode RQRQAB00, I can see that the system is able to read the inspection lot, usage decision but its not considering to select for archiving.
Some Notes regarding the above
Status of "LTIN STIC STUP" inspection lot is Green
I have checked the Archiving parameters, these details are all good.
All the pre reqs are met,
Can any one guide me, what i am missing here, is there anything else i should be doing to archive these inspection lots
I have archived the inspection lots with UD with out any issues
Please guide meHello Amar,
Please check the following requirementes to archive an inspection lot:
- The inspection lot has been cancelled, or if a usage decision has been made. (OK for you)
- The last change to the usage decision was made before the retention duration.
- All stock has been posted for a stock-relevant inspection lot. (OK for you)
- If the inspection lot is not used in any of the following data records:
Production order header
Delivery note item
Transfer requirement item without a “delivery completed” indicator.
Quality level
BR,
Natália -
Batch number archiving- Inspection lot is causing the problem
Hai,
I am trying to archive a batch, but I do receive the below message:
u201CMaterial is used in Inspection Lotu201D. Message number W4123.
How do I archive an Inspection Lot?
Note We are not using Long term Inspection.. We are in ECC 6.
Anyone had this issue before?
Thank you in advance!
SonaliHi Senthil,
Thank you for your reply. Infact, I do not have any open inspection lots. UD was done against it. I could successfully archive the inspection lot. The status on the inspection lot is now ARCH. Now I ran MM_SPSTOCK to archive the associated batch number. But still I get message "Material is used in Inspection Lots".
any ideas?
I am actually going to post this under PLM forum.
Thank you!
Sonali
Maybe you are looking for
-
File name to be generated from outbound text file data
Hi Experts, I am collecting IDOCs and generating IDOC-XML(for IDOCS) file and sending it to PI 7.0 using sender file adapter. This is File to File scenario. IDOC-XML file picked by sender file adapter gets transformed using XSL mapping in to .dat(te
-
Hi , I am doing file to idoc scenario. I am getting the file in zip format. File adaptor poll the file in zip format, Now my requirement is to extract the file in text format before content conversion .... can we use the OS command option in sender f
-
Weird distortion from scanning??
Hi. I am scanning some old photos on color negative film on an epson 4990 into photoshop cs2. I am getting these weird lines, looks like rainbow wood grain. probably from the slight bend in the negative? Wondering if there is a way to get rid of thes
-
Why certain tables not supported in DBAdapter?
While creating a Database Adapter PartnerLink and selecting a list of required tables, I get the following error: bq. *The following tables are not supported in the Database Adapter and were not imported {list of tables}* What kind of tables are not
-
Ever since upgrade I can't connect...sorta.
Hello, I'm not entirely sure which upgrade, Safari 3-4 or 10.5.6-10.5.7 is the culprit here so I wasn't sure which forum to post in. Since doing these upgrades (which were done back-to-back), I've had problems connecting to the internet with some of