Archiving job successful but no messages archived

Hi guys,
what's wrong? When I check processing statistics, nothing has changed.
Thank you,
Olian
BTW: how to delete these archived messages? I don't want to delete what hasn't been archived, so I just want to be sure. Thanks.
Edited by: Olian Saludew on Aug 22, 2008 2:16 PM

Hi
Is there a way how to archive messages sent before the job has been scheduled?
1) --> You have to update all SXMSPMAST records. Field: ITFACTION = ARCH
Write ABAP-Report!
Please do this just for one record! Then run the archive job an see if the message was archived.
(First do in your test-system!)
If this works, you can do this with all records!
What do you advise me, how should I schedule delete job so I will not delete any unarchived messages?
2) --> If you sucessfull archived all messages, you can run your deletion job
(note: sync. messages can not be archived)
is it possible to run archive job every week & delete only once a month? Won't be archived messages archoved twice?
3) --> No, because after you run the archive job, the messages get ITFACTION = DEL
Please test first!
Regards Mario
Edited by: Mario Müller on Aug 22, 2008 9:32 AM

Similar Messages

Sync archive is successful, but cannot find latest config file in the config viewer

Sync archive is successful, but cannot find latest config file in the config viewer, Prime LMS 4.2.4

Hi,
Go Admin > Collection Settings > Config > Config Archive Settings
Make sure enable shadow directory is Checked
Also check you have folders like shadow , devfiles ..etc under NMSROOT/CSCOpx/files/rme/dcma
If these folders are missing ... then it is a database issue..
if files and folders are fine then check if it happening for any particulr device or set of devices or all the devices ?
Thanks-
Afroz
***Ratings Encourages Contributors ***

I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

your phone has not been compromised. There have been no viruses, worms or trojan horses ever reported.

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

Problem in Background Job. Job Completed Successfully but data not Posted

Hi All,
There is a problem in Background Job in Production server (600).
The job completed successfully but data not posted.
The same Job was working perfectly till the starting of the May month.
but now it is not working and rebate has not been posted.
Where to check and what to check
Pls suggest.
Regards,
P Kamal

Hi ,
Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and
check out, whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
If it has some error in Job Log then let me know the error.
Regards,
Uma

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Job finished successfully but Spool not generated(no spool icon)

I am generating a report which . When the program in scheduled, the job completed successfully but spool icon is not available. Could any one suggest us the reason why spool has not generated. Thanks in advance!

Hi,
When executing report, Spool gets generated only when an Output is generated. Please check if output exits for the selection criteria.
Also check any special mechanisms are used that diverse the ouput when executed in background.

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Hi, I requested an unlock from T-mobile UK 1.5M ago, and after a restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. What am I doing wrong?

Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for advice

Did you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader. The upgrades indicate they were successful but I still get an error message when I try to open I-Photo telling me I need to prepare the library

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader. The upgrades indicate they were successful but I still get an error message when I try to open I-Photo telling me I need to prepare the library

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader.
But have you run the the iPhoto Library upgrader? It is installed in Applications > Utilities. Launch it and direct it to your iPhoto library.
Which version of iPhoto did you upgrade from?
The upgrader is only necessary, if you have been running iPhoto7.1.2 or earlier.

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.

Thanks so much for your reply fanboy20.
Yes, just made sure of that. I do have the latest version of Flash player. But I have just staggered upon the answer. Chalk it up to being a newbi. I was not putting my apple tv to sleep and it would not allow me to see
you tube on my computer while it was still operating on my TV. When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine. Thanks again for your response.

Job created successfully but actually failed

Dears,
I created this job by HR user to refresh the Materialized View automatically every 15 minutes as below:
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME => 'Job1',
JOB_TYPE => 'PLSQL_BLOCK',
JOB_ACTION => 'EXEC DBMS_MVIEW.REFRESH(''MV_employess'',''C'')',
START_DATE => SYSTIMESTAMP,
repeat_interval => 'freq=MINUTELY;interval=15',
END_DATE => NULL,
ENABLED => TRUE,
AUTO_DROP => FALSE,
COMMENTS => 'Refreshes Materialized View');
END;
/PL/SQL procedure successfully completed.
The job created successfully but while querying the "DBA_SCHEDULER_JOBS" found that failure_count is 1. It means that job created successfully but actually failed.
can you please help me ?
Many thanks & regards,

USER_SCHEDULER_JOB_RUN_DETAILS was very useful as i found some errors like ORA-06550 & PLS-00103 errors.
i solved the issue and job has been run successfully.
Many thanks for support

Task scheduler is showing success but not running job

Hello, I have a relatively simple .net application that I realized when ran through the Task Scheduler of a Windows 2008 R2 server it shows in the status that i completed successfully but apparently did not run at all from looking at the log file.
When I just manually execute this program it runs perfectly fine. I am using myself as the user to run this task and have full permissions.
I also tried a test batch file that just echos some text into a text file. Same issue.... shows that it runs ok in task scheduler but doesnt do anything while running it manually works fine.
Any ideas of what could be causing this? thanks

Hi Nehemiah,
I ran the test batch file as below and work without issue:
@echo This is a test> d:\test.txt
And this is my setting:
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

Archiving job successful but no messages archived

Similar Messages

Maybe you are looking for