Archiving Object-File Struct tab?.

Dear Friends,
When we are going to create an Archiving object. we can get 4 tabs those are Select Data, File struct, Folder, Delete.
Kindly could any one explain me about Folder tab.
Thanks & Regards,
Shaliny M

Alberto,
Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

Similar Messages

Archiving object in open hub with logical file name

Hello,
I am trying to use an open hub with a logical file name.
By the SAP help looks like you have to use/define a archiving object:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
Steps 1 and 2 of "Defining Logical Path and File Names" are done and tested:
       1.      Definition of the logical path name
       2.      Definition of the logical file name
       3.      Assignment of the logical fine name for the archiving object
But is it not clear to me if an archiving object is suppose to be used, which one then?, or if you have to create a new archiving object, with which characteristics?
Any help welcome,
Alberto.

Alberto,
Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

During writing for archiving object FI_MKKDOC, file is not getting created

Hi Experts,
I am new to archiving concept & have one archiving object FI_MKKDOC which i have to complete as soon as possible.
In this i have done all the basic settings & when i am excuting the transaction after putting production variant & scheduling it as immediate with LP01 printer.Job is finished successfully but in the log there is no message for any file creation. I have checked AL11 transaction also, no file is getting generated. Please help, we have configured the logical file ARCHIVE_GLOBAL_PATH and ARCHIVE_DATA_FILE.

dont you have a spool file for this archiving job? This should usually list errors that prevented an item from beeing archived, and if nothing was archived, then no file exists.
When you define a variant for the write step, then select full detailed log in the lower part of the selection screen, especially if it is the first time that you archive with this object.
Further, please read the docu behind the blue info button in the selection screen. This tells you the sequence you have to use for the archiving as well as other important details.

MM_EKKO Archiving Object

Hi,
Reg: MM_EKKO - Material Management Archiving Object.
I have executed the Write Job it completed successfully. And then I executed Delete Job in 'Test Mode', it also executed successfully and it didn't delete the record from the table which is correct. But when i tried to open the Purchase order from ME23N it shown message in status as ' Purchase Order already archived'. Kindly let me know why this message is produced.
Regards,
Vimal

Hi Reddy,
Thanksfor your reply.
Actually my concern is not that.
Write Job(Production Mode) -- It Created a Archive file with the Purchase Order i specified in the selection parameter. So write Job is fine.
Delete Job(Production Mode) - It deleted the Purchase Order from the database and the archived PO is displayed from ME23N. So this is also fine.
Delete Job(Test Mode) -- It just executed, Purchase Order is not deleted from database. Which is also fine and correct as well. When i displayed the same PO in ME23N, The PO is displayed with message 'Purchase Order is already archived' . But it should not show the message bcoz i didnt archived it. This is wat my concern.
Regards,
Vimal

Capture all SQL statements and archive to file in real time

Want to Capture all SQL statements and archive to file in real time?
Oracle Session Manager is the tool just you need.
Get it at http://www.wangz.net
This tools monitor how connected sessions use database instance resources in real time. You can obtain an overview of session activity sorted by a statistic of your choosing. For any given session, you can then drill down for more detail. You can further customize the information you display by specifying manual or automatic data refresh, the rate of automatic refresh.
In addition to these useful monitoring capabilities, OSM allows you to send LAN pop-up message to users of Oracle sessions.
Features:
--Capture all SQL statement text and archive to files in real time
--Pinpoints problematic database sessions and displays detailed performance and resource consumption data.
--Dynamically list sessions holding locks and other sessions who are waiting for.
--Support to kill several selected sessions
--Send LAN pop-up message to users of Oracle sessions
--Gives hit/miss ratio for library cache,dictionary cache and buffer cache periodically,helps to tune memory
--Export necessary data into file
--Modify the dynamic system parameters on the fly
--Syntax highlight for SQL statements
--An overview of your current connected instance informaiton,such as Version, SGA,License,etc
--Find out object according to File Id and Block Id
Gudu Software
http://www.wangz.net

AnkitV wrote:
Hi All
I have 3 statements and I am writing some thing to a file using UTL_FILE.PUT_LINE after each statement is over. Each statement takes mentioned time to complete.
I am opening file in append mode.
statement1 (takes 2 mins)
UTL_FILE.PUT_LINE
statement2 (takes 5 mins)
UTL_FILE.PUT_LINE
statement3 (takes 10 mins)
UTL_FILE.PUT_LINE
I noticed that I am able to see contents written by UTL_FILE.PUT_LINE only after statement3 is over, not IMMEDIATELY after statement1 and statement2 are done ?
Can anybody tell me if this is correct behavior or am I missing something here ?Calling procedure must terminate before data is actually written to the file.
It is expected & correct behavior.

Sender File Adapter: Adapter Module to archive incoming file?

Dear experts,
I have ZIP files coming from an external system which a File Sender adapter picks up from the PI file system. I already added the PayLoadZipBean Module to unzip the file in order to be able to map the payload. It works fine.
Now in the tab "Processing" --> "Processing Mode" I have the option to choose "Archive" and give a path. That way I can archive them also on the PI file system.
But how could I choose an FTP location here? Can I or would I have to write an adapter module?
In case for an adapter module how do I access the incoming ZIP file? Any ideas?
Thank you for any help and best regards,
Peter

Hi Peter,
I'm afraid you are not fully right about the archiving. Choosing Processing Mode = Archive leads to the file being moved to a different directory once it is processed. According to SAP Help:
Processing Mode
○       Archive
Files that have been successfully processed are moved to an archive directory.
■       To add a time stamp to a file name, select the Add Time Stamp indicator.
The time stamp has the format yyyMMdd-hhMMss-SSS. The time stamp ensures that the archived files are not overwritten and it enables you to sort them according to the time that they were received.
■       Under Archive Directory, enter the name of the archive directory.
■       If you want to archive the files on the FTP server, set the Archive Files on FTP Server indicator. If you do not set the indicator, the files are archived in the Adapter Engine file system.
See here for further details:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Hope this helps,
Grzegorz

Archiving object in ECC

hi gurus,
need some procedure help in identifying archiving object in ECC system.
i would like to what exactly do we look in TAANA and DB15 ,after sorting the largest and fast growing DB tables .
TAANA basically shows the records and table entries. DB15 shows the relation between the table and archiving object.
i need some inputs in identifying the right archiving object using these tools. I went through standard guides but I'm not getting a clarity.
please assist

Hello,
For identifying the archiving object for respectable you can use DB15 transaction. Note that you should have some idea in archiving area so that is will be easier to conclude on archiving object.
Your understanding on display of archived data is wrong.
Archive data are stored in archive file non-readable format, while display SAP convert the data into readable format to user.
This will not reload the data into tables while reading the archive data.
Archive information system is very well build, it is easy to handle with business requirement on views & managing archive index table, so i would suggest to make use of archive information system to display from archive.
Hope it will give some lights on display of archived data.
-Thanks,
Ajay

Archiving the File in the same source folder

Hi EveryBody,
I have a file to file scenario.
Scenario Description :
I have 10 source folders and one Communication channel.I am picking the files from different source folders (with .txt extension) using the option Advance Selection for Source File in the CC.
I am able to pick the files,do the Content Conversion and process them.
Now i want to archive these files in the same source folder from where i pick.The Archive Filename will be same as the Source Filename with the extension changed to .eof (for example if i have a file in folder X with the name input.txt then it shld be picked and archived in the same folder X with the name input.eof).
Can somebody help me out on this?
How can i do this?
Is there any option to do such type of archiving for any number of folders using a single Communication channel?
Adapter Module is one of the option but is there any other option?
If Adapter module is one of the option , can somebody expain me the Module execution flow for the sender file adapter , that is whether custome model will execute first or standard module is executed before that.
Helpful answers will be rewarded with points.
Thanks,
Zabiulla

Hi
While configuring your communcitation channel, in the processing tab --> processing mode,you need to select the archive mode and then specify the path as to where you want to post it, in your case it will be the same path as to your source path, give the same path and specify the name of the file as to what name you want to archive
Hope this clears your doubt
Thanks
Saiyog
Edited by: Saiyog Gonsalves on Jun 4, 2008 12:14 PM

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

How to dislay images stored in R/3 as archive objects

Dear All,
In my view I need to show photos,which are actually uploded into R/3 through archive objects.I have used FM:<b>SCMS_DOC_URL_READ</b> to get the URL, as this is not a http url the image UI element is not render .
so pls help me in solving this.
Thanks,
Sethu

Hi
This problem can be solved if you can save your images in MIME repository.
Open your dynpro component in SE80.
from context menu of componentcontroller, go to CREATE-->MIME object
-->Create
On shared tab enter name and description and click on the button next to field "MIME TYPE" . Select GIF graphic option. now 1 folder with the name of your dynpro component is being created in MIME reposiroty
start transaction SE80 and press the button "MIME repository" on top left corner.
navigate to SAP → BC →WebDynpro → SAP and look for the folder with the name of your dynpro component.
Right click on folder and choose "import MIME object" and select the image you want to display.
create a view element in your dynpro component of type "TRAY"
Inside it create a view element of type "IMAGE". From property section of IAMGE view element, open the drop down for source.
Select tab "Component images" and select your dynpro component from drop down.
Execute the application to test it.
regards
Vishal Kapoor

How to delete archive log files from ASM through Grid Control

Hi
Anybody suggest me how to delete archive log files from ASM through Grid Control.
Thanks

It is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
~ Madrid
http://hrivera99.blogspot.com/

Oracle write archive log files continuosly

Hi all,
I don't know why my Oracle Database has this problem. Online log are writen to archive log file continuously(3 minutes period). My archive logfile is 300M. I have startup force my database. It work, but archive log files are writen so much. This is alert log:
>
Sat Jan 1 14:23:19 2011
Successfully onlined Undo Tablespace 5.
Sat Jan 1 14:23:19 2011
SMON: enabling tx recovery
Sat Jan 1 14:23:19 2011
Database Characterset is AL32UTF8
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Sat Jan 1 14:23:40 2011
WARNING: AQ_TM_PROCESSES is set to 0. System operation might be adversely affected.
Sat Jan 1 14:24:32 2011
db_recovery_file_dest_size of 204800 MB is 28.64% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Sat Jan 1 14:24:40 2011
Completed: ALTER DATABASE OPEN
Sat Jan 1 14:27:05 2011
Warning: PROCESSES may be too low for current load
shared servers=360, want 7 more but starting only 3 more
Warning: PROCESSES may be too low for current load
shared servers=363, want 9 more but starting only 0 more
Sat Jan 1 14:27:39 2011
Warning: PROCESSES may be too low for current load
shared servers=363, want 9 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=364, want 9 more but starting only 0 more
Sat Jan 1 14:28:58 2011
Thread 1 advanced to log sequence 9463 (LGWR switch)
Current log# 3 seq# 9463 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9463 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:30:20 2011
Errors in file /opt/app/oracle/admin/TNORA3/bdump/tnora_j000_17762.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00018: maximum number of sessions exceeded
Sat Jan 1 14:39:47 2011
Thread 1 advanced to log sequence 9464 (LGWR switch)
Current log# 1 seq# 9464 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9464 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 14:42:51 2011
Errors in file /opt/app/oracle/admin/TNORA3/bdump/tnora_s008_17165.trc:
ORA-07445: exception encountered: core dump [_intel_fast_memcpy.J()+80] [SIGSEGV] [Address not mapped to object] [0x2B8988CE2018] [] []
Sat Jan 1 14:42:57 2011
Thread 1 advanced to log sequence 9465 (LGWR switch)
Current log# 2 seq# 9465 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9465 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 14:43:11 2011
found dead shared server 'S008', pid = (42, 1)
Sat Jan 1 14:45:39 2011
Thread 1 advanced to log sequence 9466 (LGWR switch)
Current log# 3 seq# 9466 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9466 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:48:47 2011
Thread 1 cannot allocate new log, sequence 9467
Checkpoint not complete
Current log# 3 seq# 9466 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9466 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:48:50 2011
Thread 1 advanced to log sequence 9467 (LGWR switch)
Current log# 1 seq# 9467 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9467 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 14:52:11 2011
Thread 1 advanced to log sequence 9468 (LGWR switch)
Current log# 2 seq# 9468 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9468 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 14:55:12 2011
Thread 1 advanced to log sequence 9469 (LGWR switch)
Current log# 3 seq# 9469 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9469 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 14:58:12 2011
Thread 1 advanced to log sequence 9470 (LGWR switch)
Current log# 1 seq# 9470 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9470 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:02:00 2011
Thread 1 advanced to log sequence 9471 (LGWR switch)
Current log# 2 seq# 9471 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9471 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 15:05:16 2011
Thread 1 advanced to log sequence 9472 (LGWR switch)
Current log# 3 seq# 9472 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9472 mem# 1: /u02/oradata/TNORA3/redo03b.log
Sat Jan 1 15:08:30 2011
Thread 1 advanced to log sequence 9473 (LGWR switch)
Current log# 1 seq# 9473 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9473 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:11:12 2011
Thread 1 cannot allocate new log, sequence 9474
Checkpoint not complete
Current log# 1 seq# 9473 mem# 0: /u01/oradata/TNORA3/redo01a.log
Current log# 1 seq# 9473 mem# 1: /u02/oradata/TNORA3/redo01b.log
Sat Jan 1 15:11:14 2011
Thread 1 advanced to log sequence 9474 (LGWR switch)
Current log# 2 seq# 9474 mem# 0: /u01/oradata/TNORA3/redo02a.log
Current log# 2 seq# 9474 mem# 1: /u02/oradata/TNORA3/redo02b.log
Sat Jan 1 15:14:15 2011
Thread 1 advanced to log sequence 9475 (LGWR switch)
Current log# 3 seq# 9475 mem# 0: /u01/oradata/TNORA3/redo03a.log
Current log# 3 seq# 9475 mem# 1: /u02/oradata/TNORA3/redo03b.log
>
PLs, help me.

This is the contait of tail -100 /opt/app/oracle/admin/TNORA3/bdump/tnora_s008_17165.trc | more
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1569
KCBS: nbseg[3] is 1568
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1569
KCBS: nbseg[7] is 1568
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1569
KCBS: nbseg[11] is 1568
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1569
KCBS: nbseg[15] is 1568
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1569
KCBS: nbseg[19] is 1568
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 445
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1569
KCBS: nbseg[3] is 1568
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1569
KCBS: nbseg[7] is 1568
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1569
KCBS: nbseg[11] is 1568
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1569
KCBS: nbseg[15] is 1568
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1569
KCBS: nbseg[19] is 1568
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 445
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1568
KCBS: nbseg[3] is 1569
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1568
KCBS: nbseg[7] is 1569
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1568
KCBS: nbseg[11] is 1569
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1568
KCBS: nbseg[15] is 1569
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1568
KCBS: nbseg[19] is 1569
KCBS: Act cnt = 15713
KCBS: bufcnt = 31365, nb_kcbsds = 31365
KCBS: fbufcnt = 444
KCBS: Tot bufs in set segwise
KCBS: nbseg[0] is 1568
KCBS: nbseg[1] is 1568
KCBS: nbseg[2] is 1568
KCBS: nbseg[3] is 1569
KCBS: nbseg[4] is 1568
KCBS: nbseg[5] is 1568
KCBS: nbseg[6] is 1568
KCBS: nbseg[7] is 1569
KCBS: nbseg[8] is 1568
KCBS: nbseg[9] is 1568
KCBS: nbseg[10] is 1568
KCBS: nbseg[11] is 1569
KCBS: nbseg[12] is 1568
KCBS: nbseg[13] is 1568
KCBS: nbseg[14] is 1568
KCBS: nbseg[15] is 1569
KCBS: nbseg[16] is 1568
KCBS: nbseg[17] is 1568
KCBS: nbseg[18] is 1568
KCBS: nbseg[19] is 1569
KCBS: Act cnt = 15713
KSOLS: Begin dumping all object level stats elements
KSOLS: Done dumping all elements. Exiting.
Dump event group for SESSION
Unable to dump event group - no SESSION state objectDump event group for SYSTEM
ssexhd: crashing the process...
Shadow_Core_Dump = partial

Regarding Archiving Object

Hello Experts,
I have few questions about Archiving object:
1. How to create an archiving object for set of Z tables? shall i create a new archiving object by clicking on new entry or shall i copy an existing archiving object.
2.is there any restrictions on number of tables being used in an archiving object? in our scenario there are around 15 Z tables...
3. in T code AOBJ, i want to maintain customizing settings, but the screen is greyed out,which authorzation role will give me the access to this screen.
4.what are the retrieval methods avaialable in system???
5.in our scenario we have created a new archivie info structure,shall we use standard field catalog or need to create a new one???
awaiting your reply
Regards
Ramana Reddy

hi
ans 4 :
you should call 4 function modules in sequence to retrive the archived data from archiving files to your report program.
see the below sample code:
data declaration
data: handle                 like sy-tabix,
      buffer                 type arc_buffer,
      sbook_wa               like sbook,
      number_of_records_read type i.
open existing archive files
call function 'ARCHIVE_OPEN_FOR_READ'
     exporting
          object         = 'BC_SBOOK01'
     importing
          archive_handle = handle
     exceptions
          others         = 1.
if sy-subrc <> 0.
write: / 'No file can be accessed'(001).
stop.
endif.
clear number_of_records_read.
loop to get the next data object from the archive file(s)
do.
call function 'ARCHIVE_GET_NEXT_OBJECT'
       exporting
            archive_handle = handle
       exceptions
            end_of_file    = 1
            others         = 2.
if sy-subrc <> 0.
    exit.
endif.
get data records from the data container
do.
    call function 'ARCHIVE_GET_NEXT_RECORD'
         exporting
              archive_handle   = handle
         importing
              record           = buffer-segment
              record_structure = buffer-rname
         exceptions
              end_of_object    = 1
              others           = 2.
    if sy-subrc <> 0.
      exit.
    endif.
    add 1 to number_of_records_read.
enddo.
enddo.
write: / 'Total number of records read: '(002), number_of_records_read.
skip.
write / 'Last record read: '(003).
skip.
case buffer-rname.
when 'SBOOK'.
    sbook_wa = buffer-segment.
    write: / 'CARRID    :', sbook_wa-carrid,
           / 'BOOKID    :', sbook_wa-bookid,
           / 'CONNID    :', sbook_wa-connid,
           / 'FLDATE    :', sbook_wa-fldate,
           / 'CUSTOMID :', sbook_wa-customid,
           / 'ORDER_DATE:', sbook_wa-order_date,
when ...
If the archive object contained more than one table
(different buffer-rname), more cases would be needed.
endcase.
close the archive session
call function 'ARCHIVE_CLOSE_FILE'
     exporting
          archive_handle = handle.
ans 5:
you can either use standard field catalog, from the available field in field catalog you can select the required fields alone to your info structure.
regards
mano

Archiving object

Hi all,
How do i know, how many records archived in the archive object. Where can i check the archiving file path? i can able to see the individual table records

Hello,
The spool file of the archive write job will contain how many records per table were archived. If you no longer have the spool file, you will only be able to get the number of header records archived by going into the Management data and adding up the number of objects per archive file.
To check the archiving file path, go to the customizing information of the archive object. Select the Technical Settings under the Archiving Object-Specific Customizing section. This will show you the logical file name. This information is also in the AOBJ information. From there, you would go to transaction FILE. Find the logical file name and see what logical path is associated with it. The logical file path definition will contain the actual path.
Hope this helps.
Regards,
Karin Tillotson

Migration of archive objects from the infotype 900x

We have installed a new ECM to archive documents as contracts to a PERNR... I'm writting a migration program which from the table TOAHR copy archive from a source repository to a destination repository...
To do I use the RFC SCMS_AO_COPY ... But I have a exception 4 (config error).... What's the best way to fix this... ?
How can I set SAP HR to set the new archive repository for SAP HR archived object ?
Best regards
Jerome

Hi Dejan,
Pl find the POA attached in the first post.
We are trying to build an metting place application server and web server 8.5 on 7835I3-K9-CMD2B ( Unsupported hardware ) but later move too 7835I3-K9-RC1
I need your inputs or shere experaince whether the Meeting place application media DVD will boot in 7835I3-K9-CMD2B
and if we change the firmware of it as per the migration document. what would be the effect of it.
Description:
Latest Firmware Update Utility 3.7(1) for IBM MCS 7825-I3, MCS 7828-I3, MCS 7816-I4, MCS 7825-I4, MCS 7828-I4, MCS 7816-I5, MCS 7825-I5, MCS 7828-I5, MCS 7835-I2, MCS 7845-I2, MCS 7835-I3, MCS 7845-I3 Cisco MCS Servers
Release:
3.7(1)
Release Date:
24/Jun/2013
File Name:
FWUCD-3.7.1-I.iso
Size:
717.38 MB (752232448 bytes)
MD5 Checksum:
b7314015296d465908843359f8e72f0f
http://software.cisco.com/download/release.html?mdfid=280480160&flowid=20285&softwareid=283046743&release=3.7(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
There are certain things which are not supported by CISCO TAC but we will have to do because of customer retrain and hardware availability.
I would share the output of commands ASAP. Catching up with customer today.
Regards,
Atul

Archiving Object-File Struct tab?.

Similar Messages

Maybe you are looking for