Archiving of ERS messages: maintain archiving parameters for message type

Dear experts,
I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
NACE: application "MR", output type "ERS"
details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
The archive "K1" is existing and working for other documents, but not for ERS.
Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
Regards, Karsten

Similar Messages

Distibution Model- Outbound parameters for message type could not be found

Hi SRM Gurus,
Have you ever encountered this error while buidling Distribution model in BD64 -
When I try to generate partner profile, I am getting this error-
Outbound parameters for message type BBPCO BBPCO01 could not be created
Partner not found in partner table
This error is occuring for all message types.
Please let me know the solution if anyone has encountered this error before.
Thanks & Regards
Kapil

Hi
Are you geting this error while generate partner profile?
hope your sender and receiver logical system are correct.double check.
VERSION 3
OUTPUT MODE - tRANSFER idoc immediately option
connectivity between both sytems are ok.
did you save modelview ?
now ports automatically created . check we21 ,we20..
check your sm59 rfc destination? what type connection you made ? hope you maynot do mistake. howevercheck itup.
ask basis consultant assistance why ports anot genrated for backend system after you executed
tbd05 - do yo have entry ?
regards
muthu

Set up/maintain order type dependent parameters for order type PI01

hello all,
i would like to know how to set up/maintain order type dependent parameters for order type PI01 for a particular plant.
thanks,
maxx

Hi Maxx
Order types are maintained in T Code OPJH
Thereafter go to T Code OPL8 to maintain there dependent parameters and assign it to desired plant
Hope this helps
Rgds

Error message: No documentation exists for message V1096.

Hi Friends,
While monitoring the production system, got some cancelled transactions.
Error message: No documentation exists for message V1096.
For this I found one sap note 845599, but it's upto 5.0 , but we are using 6.0. please suggest me how to search?
if you provide solution for above message or alternative sap note, its very help ful for me
thanks in advance,
regards,
durga

Hello Durga,
IPlease apply the following note 845599 and 854744. Even these notes are up to 5.0, please review the source code.
Please make then the following correction in include program
LKAIPF2O :
call function 'SD_ORDER_CHECK'                            "326856
       exporting
            i_cobl          = p_cobl
            i_status_check = con_off
            I_NO_WARNUNG_V1096 = 'X'                 "<<<<< INSERT
These code correction should avoid the V1096 error / warning problem.
Another possible solution could be the following : please check if
you can remove the rejection code in the sales order item of the sales
order , which is reported in the job log.
Regards
Ruy Castro

Maintaining of Currency for Activity Type

Hi,
Plz let me know the solution for this issue and inpact of this on on other applications.My Controlling Area Currency is EUR but my Co Code Currency is INR and in Cost Center Master Record I maintained the Currrency for this as INR.
When entering the price for Activity type which is attached for this Cost Center.
Tell me know in whcih currency can I maintain the price for this activity type and what is the impact on this ?
Plz it is very urgent.
Br,
Edu

Since the controlling area currency if EUR, the activity rates will be in EUR. In itemization you can display the cost in INR as well as EUR.
Regards
Rakesh Pawaskar

How to find the Message Class and ID for messages in WebIC

Dear Experts,
I get some error messages in the WebIC
I went to SAAB to activate and see details on the error messages
But, what i am missing is the the message class and the ID information
Can any one tell me if there is a work around to check and find out which message class and ID the message belongs to
Regards,
Raj

Hi Raj,
Put a break-point in method get_instance or ADD_MESSAGE of class cl_bsp_wd_message_service.
Best regards,
Caíque Escaler

Maintain Copy Control for Document Types.

Hi Gurus,
My Client has two customized documents both are order Types and wants to maintain Copy control between them.
If i see VTAA i can find either New Entries option or copy option.
When i go for new entries option it asks me Requirements and Routines which needs to be set for this copy control and i am not aware of those.
The Other option is Copy as but since it's customized document types so i am not getting which document should i take as refernce for copying.
Please suggest me how to proceed.
Thanks in Advance!!!!

Hi
Ideally we don't gamble with standard settings. Not only in copy control but for all other settings related to document types, conditions, movement types etc etc. If standard settings or configuration has been deleted by human error then we should restore standard settings first. May be BASIS guy can do it and if it is not possible then open some other server where these settings are there and you should do all settings manually by copying the standard ones.
Why we recommend to always copy standard settings and make necessary changes is that standard settings are done by SAP and they have tested it thoroughly and they have hundreds of consultants who have worked on these settings. Standard settings are reliable and we can copy them without any fear of mistake. Whereas if you copy some Z settings or create new one then there are more chances of some wrong or missing settings. Logically may be it sounds not that important or useful but technically it is really fruitful to do this.
In standard settings system copies all subsequent settings and you don't need to do those settings again and you are already aware of this fact.
One more benefit is that you only need to change document names and in create new entry you'll have to enter all the fields one by one and you don't know which value is more appropriate for this field. It also saves time efforts and people like me always prefer to save efforts
Thank$

Maintaining different values for Accounting Type (KOART)

Hi experts,
I have several accounting tcodes such as FBV0, FB03, FB08, FV65,FV60 in one parent role.
FV60, FV65 are added to this role as FBV0 is checking internally for this authorization object.
All these tcodes share a same object F_BKPF_KOA which differ by activity and the accounting type (KOART).
The KOART field is an org level field defined by SAP and I have entered D,K,S as values.
But the auth object values should be different for the accounting types.
i.e 03 for D,K,S
01,02,03,77 for S
03,77 for K
All the derived/child roles for this parent should also have the same document type as the parent. How can I achieve this as this object is maintained at the org level.
I could not delete this obj from being an org level element as it is defined by SAP.
Appreciate your response.
Thanks
Kee

> If KOART is an org field you cannot differentiate between authorized activities for each of the KOART values in one role. Whether you maintain values in the parent or not only matters if you're planning to assign the parent roles to users or if you just use them as templates.
>
Parent Roles should not be assigned to any users. It should only be used as Template to grant and control Non-Organization Level authorizations centrally (you can see these option in Parent roles). Concept of Parent-Child role is to avoid creating same roles where all authorization field values are exactly same and differs only for Organization Values (different Site / Branch Office specific constants). So we can maintain the Org. levels as different sets for a single Parent role as I already explained.
For more details: Note#314513 - PFCG: Maintaining individual organizational levels
Note#532695 - PFCG: Incorrect organizational level values in derived roles
>
> Please elaborate on this one. I think we're running into an urban myth here....
>
> Organizational levels are only instruments to assist in building roles. For the final profile it does not matter whether a field is organizational or not. It will not influence the behaviour of the authority-check.
For the final profile it matters during loading of User authorization data to User Buffer. Think about the Parameter values stored for a particular user. How it behaves for all Objects containing a particular Auth. Field and providing default assignment for that user whenever he tries to perform any action where this field is required to populate.
If we delete any Object from SU24 proposal then it doesn't mean that the check will not be carried out or the Org. Field contained in that object will not be populated with it's values. I tried to make this clear to the requester.
Regards,
Dipanjan
Edited by: Dipanjan Sanpui on Jun 8, 2009 7:49 AM

Shall v maintain price control for material type with plant specific ?

Hai Guru,
In OMS2, we change HALB price control [valuation] as V or S. whether shall v maintain this for plant specific.?
Kindly guide
With Regards
Swetha

Hi
if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
Regards

FM for Maintaining Burden Rate for Activity Types

Dear All,
I was looking for the Function Module for Changing the burden rates in Activity Types.
Please if there is any FM, Please reply to this thread
Thanks
Shashikanth Naram

Check:
Re: Need Suitable BAPI for KP26 Transaction

BAPI parameters for movement type 532

Hello experts,i create a production order without material with TCODE co07,then i use BAPI 'BAPI_GOODSMVT_CREATE' to do the by-products GR(531),it is sucessful at this point,but when i do 532 reversal,it is failed,i have set below BAPI parameters:
    ls_goodsmvt_item-material = gs_list-matnr.
    ls_goodsmvt_item-plant = gs_list-werks.
    ls_goodsmvt_item-stge_loc = gs_list-lgort.
    ls_goodsmvt_item-orderid = gs_list-aufnr.
    ls_goodsmvt_item-move_type = '532'.
    ls_goodsmvt_item-order_itno = gs_list-posnr.
    ls_goodsmvt_item-reserv_no = gs_list-rsnum.
    ls_goodsmvt_item-res_item = gs_list-rspos.
    ls_goodsmvt_item-entry_uom = gs_list-meins.
After i run the BAPI and commit,the posting is sucessfull, but the move type 532 would be replaced by 531 within the BAPI,pls. help me,thank you in advance.

I do a test,if i do not transport reservation parameters(reserv_no,res_item),the bapi could post the 532 sucessfully,but it posted to unplaned goods issue,i want to post to planned goods issue,pls. help.

Error -maintain archiving parameters for outgoing documents in archive link

Hi,
I am trying to archive an outgoing document from SAP i.e. an invoice to a content repository using archive link and getting the below error:
Maintain archiving parameter(s) for output type RD00 (appl. V3)
Message no. VN096
Diagnosis
At the time of output determination, the archiving parameters for output type RD00 (application V3) were incorrectly maintained in Customizing.
Additional information:
SAP object:
Archiving object:
Procedure
Maintain the archiving parameters and repeat output determination for the required document.
Kindly help as to from which transaction I can maintain archiving parameters for this transaction ???
With Regards
Neha

Hi,
Which storage device are you using? I can only speculate the problem. Ok. So output type is configured properly. Can you check the object type for your document type in Transaction code OAC3. Check it should be VBRK. If it is not then change it to VBRK. Now go to transcation code OAD5 and check every thing is configured there or not. If it is all done then it should work. I presume that all basic customization is done in your system.
Regards
Sirfraz

Maintain archiving parameter(s) for output type RD00(appl.V3)

Hi Guys,
While trying to get the output for billing documents I'm facing a error : Maintain archiving parameter(s) for output type RD00 (appl.V3)
Diagnosis
At the time of output determination,the archiving parameters for output type RD00(application V3) were incorrectly maintained in customizing.
Additional information:
SAP object:
Archiving object:
Procedure
Maintain the archiving parameters and repeat output determination for the required document.
Expecting the solution.
Regards
Raj.

Can you check what you have in the Storage System Tab in the fields Storage Mode and Document Type.
It should be Print Only and SDOINVOICE respectively.
Thanks

Error in bapi_goodsmvmt_create: Maintain serial numbers for total quantity.

Help!
I am using bapi_goodsmvmt_create.
But it always return the error message : Maintain serial numbers for total quantity.
I passed all the required parameters as specified in the forums that i had browsed.
Pls advise what is the cause of the error?
Thanks and God bless.

Hi Sridhar!
Thank you for the very helpful link.
That link ended solve my problem.
Sorry for this late reply.
navi

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

Archiving of ERS messages: maintain archiving parameters for message type

Similar Messages

Maybe you are looking for