Archiving of preferential data for customs on SAP ECC system

Hey guys
--> Maybe one day customs authorities will examine my company (ZOLLPRÜFUNG). If they ask for information e. g. how we determined that product 4711 was preferentially qualified, we will show them the system log for any result.
I am searching for a possibility to archive results of preference determinations. How can I do that and where is the information stored? Where can I change the needed settings? This is not done on GTS but on our ECC systems.
Up to now, I only found transactions VX99, ENPR and SARA.
Is that the right direction? Advice highly appreciated!
Best regards
thomas
Edited by: thomasthomas on Jan 15, 2010 2:49 PM

Hello Thomas,
did you get information about archiving preference data from anywhere? If so, would you be so kind to share it with me/us?
Regards
Renate

Similar Messages

How to - Extract data from Cloud For Customer into SAP HANA system

Hello Community,
I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box.
Is it possible to achieve the same ? If yes, Please guide me for the same.
Awaiting quick response.
Regards
Kumar

Hi Kumar,
In addition to what Thierry mentioned you could also use the C4C integration via standard Operational Data Provisioning (ODP) interfaces. This integration was acutally built for SAP BW and allows you to access any C4C data sources. From my perspective you can also build upon that for a native SAP HANA integration. Please also have a look at this guide: How To... load SAP Business Suite data into SAP... | SAP HANA.
Besides that question let me also add the following: SAP Cloud for Customer already runs on SAP HANA since Nov. 2013. You may also use the powerful built-in analytics within C4C for analyzing data and any of your reporting demands. If your report should consider external data as well, you can combined the existing C4C data source with an external, so-called Cloud Data Source. More infomation is published in the C4C Analytics Guide: http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-3.pdf.
I hope this helps...
Best regards,
Sven

Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
Ram

Hi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman

Logical database PNP not retrieving data for custom infotypes.

Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamza

solved

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

How to upload data for custom infotype

Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & Roopa

Thanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa

Credit master data for Customer

Hi,
I need solution for the below problem.
Credit master data for Customer "X" is not maintained.
Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
Information/Error message shouldd be:No credit master data maintain for Customer "X"
Thanks for your help.
Regards,
Balaji.

Hi
You can use the followig user exit which will perform a check while saving the order.
Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
Program,: MV45AFZZ
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Regards
Madhu

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Extracting delta's with ODP-data source 0MATERIAL_ATTR from SAP ECC

We are using ODP-replication to extract data from SAP ECC to a MS SQL-database by SAP BusinessObjects Data Services.
For extracting Material-data we use the standard data source 0MATERIAL_ATTR in SAP ECC.
This data source delivers a full load with all Materials in it.
In the properties of this data source (tab attributes) we saw that this data source is Delta_Extractor_Capable.
Therefore we set the extraction mode from 'Query' to CDC (= Change Data Capable) and did a new initial load to get all Materials again.
After changing a Material in ECC, we did a delta-load, but unfortunately we received ZERO records.
Is there anyone with experience on extracting delta's with data source 0MATERIAL_ATTR or another standard masterdata data source in ECC?
Thank you for your reaction in advance,
Best regards,
Jan-Hendrik

Hi,
You can check the delta records in RSA3 see teh article. in https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
Delete the Queue in LBWQ/RSA7 and then freshly load Init and Check the Delta.
Once you load the Init then if there are no new records then it won't get any data. so 0 records
Check in SM37 in ECC why the job is terminated. See in ST22 also.
Thanks
Reddy

AllFusion Erwin Data Modeler Connection to SAP NW2004s Systems

We would like to use a data modeling product that we purchased for many of our SAP NW systems. We understand that there may be some restrictions on DB direct user connections and would like to confirm the following from those that may have exposure in this area:
1. If we connection the DM product to SAP, are there any restrictions on the data that is read from the SAP DB?
2. Are we violating any SAP license agreement by using the third party tool for data modeling on our SAP NW systems (since it will require a DB connection)?
3. Any other helpful information?
Any guidance would be very much appreciated.
Thanks and best regards,
Chris

Hi Chris,
How does your DM product plan on "connecting" to the SAP applications? Most of the time, SAP applications provide Remote Function Calls (RFC) (i.e. in the programming world, methods) for programmers to call in order to push or pull data to itself. There are no restrictions here aside from the normal authorizations given to access data on the application. Although SAP discourages any direct manipulations directly to the database layer.
Regards,
John Ta

Delta Replication for Customizing object from ECC- CRM

I need help on delta replication activate for customizing objects from ECC to CRM. I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL. What business transaction do I need for those so the delta will work for them too? Rewards points if helpful

I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

How to install BI-CONT 7.37 in SAP ECC system EHP 5

Hi SAP Gurus,
We recently upgraded BI_CONT in our BW landscape(SAP netweaver 7.3) from 7.36 to 7.37
What is the strategy to upgrade BI _CONT or corresponding changes in SAP ECC system(EHP 5).
Currently we don't have BI_CONT installed in our ECC system.
KIndly, let me know how to upgarde BI_CONT related objects.
Earlier we used to use custom extractors and data sources in ECC system for BI_CONT now we business has planned to use all standard data sources.
Question here is do we need to install BI_CONT in SAP ECC and what is the procedure?
Thanks,
Avadhesh
+91 8095226536

Hi Avadhesh,
No need to upgrade or install add-on BI CONTENT in ECC system if you have already BI landscape for doing BI functions.
BI content includes below functionality which can be installed as an add on in ECC when you dont have BI landscape.
DataSources
Process chains
InfoObjects
InfoSources
Transformations
InfoProvider (InfoCubes and DataStore objects)
Variables
Data mining models
Queries
Workbooks
Web templates
Roles
Aggregation level
Planning function
Planning function type
SAP Crystal Reports (BI Content Ext.)
SAP BusinessObjects Dashboards (BI Content Ext.)
Regards,
Karthik

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
    </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
    <DELIMITER />
    <NO_DATA />
    <QUERY_TABLE>MARA</QUERY_TABLE>
    <ROWCOUNT>20</ROWCOUNT>
    <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
    <DATA>
      <item>
        <WA>000000000000000023ROH 00000000</WA>
      </item>
      <item>
        <WA>000000000000000038HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000043HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000058HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000059HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000068FHMI 00000000</WA>
      </item>
      <item>
        <WA>000000000000000078DIEN 00000000</WA>
      </item>
      <item>
        <WA>000000000000000088FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000089FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000098HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000170NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000178NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000188NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000288HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000358HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000359HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000521HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000578FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000597HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000598VERP 00000000</WA>
      </item>
    </DATA>
    <FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET>000000</OFFSET>
        <LENGTH>000018</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Number</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET>000018</OFFSET>
        <LENGTH>000004</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Type</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET>000022</OFFSET>
        <LENGTH>000003</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET>000025</OFFSET>
        <LENGTH>000001</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET>000026</OFFSET>
        <LENGTH>000008</LENGTH>
        <TYPE>D</TYPE>
        <FIELDTEXT>Valid-From Date</FIELDTEXT>
      </item>
    </FIELDS>
    <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

Archiving of preferential data for customs on SAP ECC system

Similar Messages

Maybe you are looking for