Archiving output PO with ArchiveLink

Hello,
I'd like to archive output PO, but I have the error message ME142 saying that something went wrong in OPEN_FORM, when I'm running ME9F transaction.
Message type is NEU, and has been customized to be able to send PO by mail to the vendor (medium 5), and at the same time to archive it (Storage mode = 3 and Document type = MEOORDER).
A content repository has been defined.
When I try to debug it, it seems the system is trying to find a filename, while it should create it !
Does anybody have already cutomized the system to do the same and can you please help me ?
Thks.
Marie-Christine.

Similar Messages

Input xml from output xml with reverse transformation

I have the transformation and the output xml file. Is there any way I get the input message using the trasformation and output message with minor manual changes? Is there any tool for that?

Hi Ragavalli,
I understand that you want to archive the incoming message before map is applied. (Assuming map is not to be there on send port as not very clear about restrictions you have)
There are two ways:
1. Use of Custom pipeline component to archive message . You can find one at :http://biztalkarchiving.codeplex.com/
2. The other option is to have
Recieve port without map
Two send port one pointing to Archive folder and other to temporary folder (intermediate)location
Add both the send port to Send Port group. Have filter on it as BTS.PortName = ReceivePortName
Create a receive port with temporary folder as receive location
Apply the inbound map on this port
If map can be allowed on send port then
1. Rec port without map
2. Two send port, one without map other with map.
Thus original message will be saved by Send Port 1 and transformed by Send Port 2
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Size archive log different with online redo log

Dear Experts,
I had a problem with archive redo log size. I saw the size between archive redo log and online redo log is different.
The online redo log on path /oracle/SID/origlogA/log_g17m1.dbf , the size is 280MB, but on archive log the size just 130MB.
Why the size different? How to change the archive redo log?
We are running with Oracle 11.2.0.4.
Please aid me to solve this issue.
Thanks
Edy

Hi,
Yes, all of the size archive logs mismatch with online redolog.
I tried dump the trace file using command "alter database backup control file to trace file" and here is the result:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "SID" NORESETLOGS ARCHIVELOG
    MAXLOGFILES 255
    MAXLOGMEMBERS 3
    MAXDATAFILES 508
    MAXINSTANCES 50
    MAXLOGHISTORY 46720
LOGFILE
GROUP 5 (
    '/oracle/SID/origlogA/log_g15m1.dbf',
    '/oracle/SID/mirrlogA/log_g15m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 6 (
    '/oracle/SID/origlogB/log_g16m1.dbf',
    '/oracle/SID/mirrlogB/log_g16m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 7 (
    '/oracle/SID/origlogA/log_g17m1.dbf',
    '/oracle/SID/mirrlogA/log_g17m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 8 (
    '/oracle/SID/origlogB/log_g18m1.dbf',
    '/oracle/SID/mirrlogB/log_g18m2.dbf'
) SIZE 280M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
Output ommited
Thanks
Edy

Mass uploading with ArchiveLink?

Dear Expert,
We are uploading HR documents with Archivelink through Tr. code OAWD. for that we allready created different Object(Archive) links for diff. Infotypes and there is no problem in uploading documents one by one for diff. Infotypes of each employee.
But currently as per requirement, we needed to upload around 20000 employees documents for 10 different Infotypes.
I want procedure/method/suggestions for mass uploading of documents with ArchiveLink as manual procedure is time consuming.
Thanks in advance..

Hi Sam,
based on your request maybe the information in the SAP online documentation (http://help.sap.com) could be useful under:
=> Help => SAP Library => Human Resources => Personnel Management (PA) => Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
For using SXDA to generate DMS document info records please see the SAP note 817743. But as you are looking for a solution on HR documents maybe another Report needs to be choosen.
Best regards,
Christoph

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

File sender adapter: archiving not possible with transp.prot "filesystem,

Hi XI gurus,
in my FILE sender adapter I want to archive the processed files to a separate sub-directory of the "in" directory.
It works if I use transport protocoll "FTP" with a specific user
but it don't works when I use transport protocoll "file system (NFS)".
the xi user has all permission on the directories.
file system is on a UNIX machine.
Has anybody an idea why archiving only works with transf.protocoll FTP ?
Thanx very much in advance
regards
Hans

Hi,
Check this thread for same problem Re: NFS Sender File Adapter Source Directory
Thanks!

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Archiving EHS document with ADK

Dear all,
I am running ECC 5.0. I am trying to archive EHS documents with ADK using the object CV_DVS. I am following the documentation from IMG, Under the step "Check Document Types and Document Statues" I create the status HI, AL and AR for the document type SBR. I ran the preprocessing step for CV_DVS and I get nothing to archive. I check the log and here is the message.
Job started
Step 001 started (Program RC1_DVSARCH_PREP, variant TEST1)
Change report bodies:
Report DW_PERFORMI XXX_US_SDS E 00002 is not archived; document for report missing in SAP database
The status you enter does not exist
The status you enter does not exist
No reports were set to the status "Archiving is Running (AL)'
Job finished.
I just wonder have anyone using CV_DVS to archive those MSDS reports and would like to know how do you configure
"check document types and document statuses"? it seems something is missing in my ECC 5.0 default configuration for the table.
Thanks.

Hi,
As you experienced all DIALOG function modules will not work in Batch because the is no connection with a frontend (PC).
You have to get your PDF on a server so you can process them in Batch.
Maybe you can than use the FM: ALINK_DOCUMENTS_CREATE_FILE
Success,
Rob

Assigned the output type with AR also,It is printing in ENGLISH Only.

Hi,
I have written a Z Smartforms and Z print program.
I have used ZRV56TD00(Copied from standard program RV56TD00),Inside it I have submitted the program(Z print Program) for the shipment number for the transaction code VT03N.
It is now printing the form in english well and good.
Now I want the same to work for the ARABIC.
I had done the arabic translation in SE63 and If I run the program It is printing only in English.
When the assigned the output type with AR also,It is printing in ENGLISH Only.
Suitable answers will be rewarded.
Regards
Manohar S
Edited by: Manoj on Jun 17, 2008 4:13 PM
Edited by: Manoj on Jun 17, 2008 4:14 PM
Edited by: Manoj on Jun 17, 2008 4:15 PM

Hi Manoj,
Goto transaction NACE and check wether you have mentioned the language in Mail title and texts for the particular message type.
let me know if you require in more detail.
Regards,
Sharath

Archive Stock Cube with non-cumulative nature

Hi All,
I have been trying to archive the Inventory (Stock) Infocube as we have more than couple of hundread million records in the cube and it is taking long time to execute query.
I know how to acrive the regular cubes and DSOs, but I couldn't find any helpful documentation where I can know how to archive the Infocube with non-cumulative nature or containing Marker update.
Can anyone pleaes post the link of document?
BTW, we are using BI7.0 SP15
Thanks,
Dhaval

Hi,
There are two ways of archiving data from a non-cumulative InfoCube - time slot archiving and archiving with selection characteristics.
Time slot archiving (recommended)
As an archiving method, you must choose for a non-cumulative InfoCube, time slot archiving for the time reference characteristic. When you recreate an archiving object for a non-cumulative InfoCube, this characteristic is also suggested by the system.
Only archive non-cumulative changes up to a specific point in the past. This reduces the volume of data in the InfoCube. The marker (= end non-cumulative) remains unchanged.
In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements Only option.
You are only able to archive the marker if you also archive all of the non-cumulative changes. Subsequently, the contents of the non-cumulative InfoCube are archived completely. In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements and End Non-cumulative option.
You must archive the non-cumulative changes (for all times) first, and then archive the marker in a separate archiving run, so that the non-cumulative changes and the marker are stored separately in the archive.
The advantage of time slot archiving is that archiving runs can be carried out periodically using a single variant with a relative time restriction. The alternative archiving method described below does not have this advantage.
Archiving with selection characteristics
In some cases, archiving based only on time slots does not have the required effect of reducing the volume of data in the InfoCube. This is the case, for example, if the non-cumulative bearing objects are subject to high fluctuations, meaning that data is constantly being loaded for new objects and old objects are made obsolete. With time slot archiving, the end non-cumulative remains for all objects until all of the data in the InfoCube is finally archived, even if all the non-cumulative changes for an object have been archived already.
In this case, you want to archive and delete completely any objects that are no longer active in the InfoCube. This means archiving the marker as well. For other objects that are still active, you only need to archive the non-cumulative changes from the past, which means the marker is retained.
When you define the archiving properties for a non-cumulative InfoCube, do not therefore choose the time slot archiving method. Instead, select individually the characteristics that are relevant to restricting archiving runs. The time reference characteristic should also be included in this selection whenever possible.
Using this archiving method, for each archiving run, you need to create selection conditions in a variant. In the variant for the archiving run, in addition to the selection conditions, you can also specify for the selected characteristics whether or not non-cumulative changes and marker data is archived. If you choose to archive marker data, be aware that the time selection contains the maximum value for time.
Please refer to the below link to archive the data for Stock Cube:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/c219fe9a46194aa66d55254fdab182/frameset.htm
Hope this helps.
Regards
Tanuj

Archiving Message PI with Seeburger AS2

Hello Experts,
we have an AS2 Scenario with incoming Invoic. Now my question: It is possible to archive our incomming messages after the as2 adapter has decrypt the message an before the message is processed in the pi. Where can i configure the archive step?
here is what i found in SDN:
The new B2B Add-On for SAP NetWeaver Process Integration:
Archiving of B2B messages: Adapter module extending basic archiving functionality which is built into the AS2, X.400 and OFTP adapter. In and outgoing messages can be stored on the file system with more information (e.g. IDoc number in filename, archiving per business partner, etc.).
Kind regards
Tobias

@Venkat - "AS2 adapter doesn't support the archive functionality by default."
I disagree. There is a FileStore module provided by Seeburger which provide extensive Archiving capabilities. If you have the license, there is an Archiving guide available with it which explains the process.
A simpler and effective way is of course to use createFiles option with BIC module if you have that license.
Regards,
Prateek Raj Srivastava

Synchronise digital pattern output(6533) with a external signal

I use a PCI-DIO32HS and i want to synchronise an output pattern with an external signal(TTL;T=1.7ms).
ie :every time external signal become high(every 1.7ms)
my dio32HS output a define pattern on a line.
How can i do this?Thanks

Thanks for your answer but see attached file to see what i want to do.
I want to control delay between trigger(input signal T=1.7ms) and ouput and control the width of the ouput pulse
Best regards
Attachments:
signal.txt ‏1 KB

Archiving output PO with ArchiveLink

Similar Messages

Maybe you are looking for