Archiving Projects that use Nested Sequences

I'm looking for some help using Project Manager to archive projects that use nested sequences.
I work at the University of Michigan, we are wrapping up a study that is based on files from many Premiere Pro projects. Each project started with 150 to 160 min of video footage from two cameras.
Of this we have edited down to a 10 – 20min finished sequence containing footage from both cameras as a two-camera shoot. I want to archive eachproject (to save HDD space) retaining only the used sections of footage in thePPro archived project, allowing us to make minor edits to the projects.
My workflow has been to rely heavily on nested sequences throughout each project. From two sequences containing all of the footage from Camera1 and Camera2 all the way to the final cut sequence everything is dependent on a series of interim nested sequences. So the last sequence “Final” is based/linked on the very first sequences. When I attempt toarchive this using Project Manager the nested sequence edits are not recognized as individual clips. I either end up with all of the original footage or no footage. I’m not sure how (if?) I can archive these projects in a way to eliminate all but the final file footage segments with 30 frame handles.
Can anyone point me in the right direction or offer some advice?

figure for $1000/terabyte drive
Alot less than that, you can get a good Dual HD enclosure for $100 and probably less than that, and 500 Gig Drives for about $250 a piece, so assume about $600 without shopping too hard.
I find it is alot easier to use HDs, and have a couple of copies for important projects. You can use the other items as another backup (never can have too many) and going to be easier than having to recapture, especially if there was dropped framess or timecode issues. Guess it comes down too how often do you have to go back annd re-edit a wedding DVD once it is done, and what will make your like easier when it is said and done, but if it happens, on the HD just open it up, otherwise you have to recapture the tapes which is a couple of hours at least it sounds like.
As to archieve DVDs, who knows. There have been claims that the original CDs were to last 100 years, some of the ones I bought when they first came out started to go a few years ago. Same for some other media.

Similar Messages

Compile a project that uses Spark modules (SDK 4.5) with FB4.1?

Is it possible to compile a project that uses Spark modules with Flash Builder 4.1?
I've added SDK 4.5 to FB and selected it in the project properties (no problems here).
But how about the 'Flex modules' tab in the project properties window, will it be able to add Spark modules to the application?

Yes, you will be able to use s:Module with FB 4. You'll have to do a new MXML component, then go to Flex Modules and click on the add button. (The new module wizard there won't support the spark module)
However, please note that this is unsupported in the sense that we haven't tried that out at our end. (But I personally have and it works )
-Anirudh

Smart export/import - unable to import project that uses 'xml' technology

Hello,
I have smart exported project and this project uses technology 'XML'. When I'm trying to import it, there are following issues (screen) - no fix available to choose:
http://screener.tk/f/o/f/z6nRM.png
So, it seems technology 'XML' is not recognized during import, because it has different ID. On repository I'm trying to import to, XML has ID 27999. So, I manually edited SmartExport.xml file and changed all occurences of 1189 to correct ID: 27999 and tried again to import. After this change, there are no issues. But just after I start import, following error message is thrown and import fails:
http://screener.tk/f/o/f/wf8R0.png
The same issue when I'm trying to import any project that uses any not built-in technology. After importing technology on destination server, ID doesn't match. And if I change ID in SmartExport.xml, no issues but import fails due to error similar as above.
So, what is the correct way to perform succesfull import/export in this cases and how to fix "dirrerent origin" errors? Do you have any idea?

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

How to archive a Java project that uses an Oracle XE DB?

Hi,
As the title suggests, I have a small Java application that uses Oracle XE as the database. Now that I have finished working on the application, I want to archive it and email it to friends and coworkers to test it. However, I know that none of these people have any database software installed. I also can't have them connect remotely to the one on my development machine.
Is there any way to include the database in my application archive, so that all they have to do is run the application without worrying about its back-end? Should I use another back-end?
Any help is appreciated.
Thanks

Unless your database server is on a remote machine that they can connect to then you can't package the WHOLE DATABASE, software and all and send it via e-mail.
You can package your application, and also export the contents of your database into a .dmp file and send that.
The user will NEED Oracle software then to import the contents of your .dmp file.

Each edit is taking 5-10 seconds to process in some of my project file's nested sequences. What can I do?

I edit a weekly news show. For this show, I have created a Project File that I re-use as a template every week. It's a highly nested template, with a sequence for every used material (the anchorman’s footage, the news set, the media playing over the anchorman’s shoulder, the lower thirds, etc). It has three different camera angles in a multicam sequence, each sequence sharing the same nested sequences but just resized to look like a different camera angle. To make this easier to understand, here's an episode (explicit):
SKATELINE - Cory Kennedy, David Gonzalez, Jimmy Carlin In Enjoi Oververt and more.. - YouTube
In the past, the template has worked perfectly. However, everytime Adobe has a major update and I update the project file, for some reason, some of the sequences perform very sluggishly. With Adobe's recent update, the sequences for the anchorman’s footage and the media playing behind him are very slow to make edits in. Every action I do takes 10 seconds to process, even moving an image. However, if I work in the master sequence (With everything put together) everything runs perfectly smooth when I make edits.
In an attempt to fix this problem, I decided to recreate the project file from scratch, with the new update, but even then, my "anchorman footage" and "media behind him" sequences are very slow. What's even more bizarre is if I select a piece of footage in the anchorman sequence, my entire program sometimes crashes. I have tried rendering the sequences to help performance, but that hasn't worked. I have tried installing CUDA Drivers to use the CUDA version of the Mercury Playback Engine on my Macbook Pro Retina, but it also still isn’t working.
So why do you think that my sequences are operating so slowly? What could be causing it? Could it be that each sequence is used several times in the multicam sequence? If so, why has it worked smoothly until now? What can I do?

Yes same issue for me also, working in mutli cam nestings
Very Very Sluggish Performance, semi hangs in PP, if you actually wait long enough, or leave it hung whilst you do a post on here, for a few minutes then it may come back to response.
The issue is defo to do with nesting, I have tried turning off audio wave forms, which helps in the multicam nest edit but as soon as you put that sequence into a third nest then the sluggishness is major.
Basically, this looks to be the same issues that have been reported before with the new update.

Problems while compiling a project that uses Database Adapter

Hi,
I am working on a small WebService that uses the Database Adapter to connect with the Oracle-Lite database. The process is a synchronous process which has client and DatabaseService as the partner link. The goal of this project is to get two inputs from the user and send it over to the DatabaseService for it to select the rows from the table based on the inputs sent. The process activity has an invoke function which had two varibles Invoke_1_inputVarible and Invoke_1_outputVarible. I have included the *.xds that contains the database schema. When I compile the project i get the following error
Error(38): [Error ORABPEL-10035]: wrong messageType [Description]: in line 38 of "D:\OraBPELPM_2\integration\jdev\jdev\mywork\Workspace1\Login\Login.bpel", messageType "{http://xmlns.oracle.com/pcbpel/adapter/db/ds/}EmployeeRole_msg" of variable "Invoke_1_dsSelect_InputVariable" does not match the expected messageType "{http://xmlns.oracle.com/pcbpel/adapter/db/ds/}dsSelect_inparameters" in <invoke>. [Potential fix]: make sure the correct variable is used in invoke.
My question is how do I assign correct messageType for the variables.
XSD File:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" elementFormDefault="unqualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="EmployeeRoleCollection" type="EmployeeRoleCollection"/>
<xs:element name="EmployeeRole" type="EmployeeRole"/>
<xs:complexType name="EmployeeRoleCollection">
<xs:sequence>
<xs:element name="EmployeeRole" type="EmployeeRole" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EmployeeRole">
<xs:sequence>
<xs:element name="empid" type="xs:decimal" minOccurs="0" nillable="true"/>
<xs:element name="password" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="role" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="uid" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="findAllInputParameters" type="findAll"/>
<xs:complexType name="findAll">
<xs:sequence/>
</xs:complexType>
<xs:element name="dsSelectInputParameters" type="dsSelect"/>
<xs:complexType name="dsSelect">
<xs:sequence/>
</xs:complexType>
</xs:schema>
DatabaseService.wsdl
<?xml version="1.0" encoding="UTF-8"?>
<definitions
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login"
schemaLocation="EmployeeRole_table.xsd"/>
</schema>
</types>
<message name="EmployeeRoleCollection_msg">
<part name="EmployeeRoleCollection" element="top:EmployeeRoleCollection"/>
</message>
<message name="dsSelect_inparameters">
<part name="dsSelect_inparameters" element="top:dsSelectInputParameters"/>
</message>
<message name="EmployeeRole_msg">
<part name="EmployeeRole" element="top:EmployeeRole"/>
</message>
<portType name="ds_ptt">
<operation name="dsSelect">
<input message="tns:dsSelect_inparameters"/>
<output message="tns:EmployeeRoleCollection_msg"/>
</operation>
<operation name="queryByExample">
<input message="tns:EmployeeRole_msg"/>
<output message="tns:EmployeeRoleCollection_msg"/>
</operation>
</portType>
<binding name="ds_binding" type="tns:ds_ptt">
</binding>
<service name="ds">
<port name="ds_pt" binding="tns:ds_binding">
<jca:address location="eis/DB/BPELSamples"
/>
</port>
</service>
</definitions>
Login.bpel
<process name="Login" targetNamespace="http://xmlns.oracle.com/Login" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/ds/" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" xmlns:client="http://xmlns.oracle.com/Login" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink name="client" partnerLinkType="client:Login" myRole="LoginProvider"/>
<partnerLink name="PartnerLink_1" partnerRole="ds_role" partnerLinkType="ns1:ds_plt"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:LoginRequestMessage"/>
<variable name="outputVariable" messageType="client:LoginResponseMessage"/>
<variable name="Invoke_1_dsSelect_InputVariable" messageType="ns1:EmployeeRole_msg"/>
<variable name="Invoke_1_dsSelect_OutputVariable" messageType="ns1:EmployeeRoleCollection_msg"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="client" portType="client:Login" operation="process" variable="inputVariable" createInstance="yes"/>
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"/>
<to variable="Invoke_1_dsSelect_InputVariable" query="/ns2:EmployeeRole"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="PartnerLink_1" portType="ns1:ds_ptt" operation="dsSelect" inputVariable="Invoke_1_dsSelect_InputVariable" outputVariable="Invoke_1_dsSelect_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_dsSelect_OutputVariable" part="EmployeeRoleCollection"/>
<to variable="outputVariable" part="payload"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:Login" operation="process" variable="outputVariable"/>
</sequence>
</process>
Thanks,
Niv

Help! SOS....
Niv

Parse a string that uses nested string delimiters

I’m looking for a way to parse a string that uses double quotes as the delimiter that contains a nested string with double quotes. I want to keep the double quotes in the nested string. Is there a function in Labview that I can use to easily do this? Does Labview have a command line parser / interpreter?
The string example is: While match "Send Test "Sleep 5" ">""
The result string would be: Send Test "Sleep 5" ">"

Here is another solution which is slightly faster. Speed won't be
an issue unless you are running millions at a time, as in my test the
difference was only 1-2 ms in 10000 iterations. In this image the
Match Pattern function retrieves the desired string, including the
outside quotes, so the String Length and String Subset functions are
used to remove the first and last characters of the result.
Message Edited by tuba on 04-11-2006 10:35 PM
Attachments:
parse.gif ‏3 KB

Failure When Deploying EJB Project That Uses Library Onto Glassfish

Hi,
I have a multi project application that I am developing and I am having issues testing it. I have set up a EAR, WAR, EJB, and two library JARs. The EJB contains classes that use components from the library JARs or implement abstract classes from the library JARs. I have added the library JARs to the compile-time libraries of the EJB. I then also added the library JARs to the libraries of the EAR. However when I then go to deploy the EAR onto the Glassfish server I get this error, displayed in the Glassfish log: 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClass 
WARNING: Error in annotation processing: java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClas 
SEVERE: Class [ com/foo/sdk/core/InterfaceClass ] not found. Error while loading [ class com.foo2.BeanFooClass ] 
SEVERE: Exception while deploying the app [FooEAR] 
SEVERE: Invalid ejb jar [BeanFoo.jar]: it contains zero ejb. 
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.
java.lang.IllegalArgumentException: Invalid ejb jar [BeanFoo.jar]: it contains zero ejb.
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.
 at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:76)
 at com.sun.enterprise.deployment.util.ApplicationValidator.accept(ApplicationValidator.java:128)
 at com.sun.enterprise.deployment.EjbBundleDescriptor.visit(EjbBundleDescriptor.java:730)
 at com.sun.enterprise.deployment.Application.visit(Application.java:1768)
 at com.sun.enterprise.deployment.archivist.ApplicationArchivist.validate(ApplicationArchivist.java:799)
 at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openWith(ApplicationArchivist.java:277)
 at com.sun.enterprise.deployment.archivist.ApplicationFactory.openWith(ApplicationFactory.java:240)
 at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:170)
 at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:93)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:826)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:768)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:368)
 at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
 at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:370)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:355)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:370)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1067)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:96)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1247)
 at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235)
 at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:465)
 at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:222)
 at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:168)
 at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
 at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:234)
 at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:822)
 at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:719)
 at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1013)
 at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:225)
 at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
 at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
 at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
 at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
 at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
 at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
 at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
 at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
 at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
 at java.lang.Thread.run(Thread.java:679)
SEVERE: Exception while deploying the app [FooEAR] : Invalid ejb jar [FooBean.jar]: it contains zero ejb. 
Note:
1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.
2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.
3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly. 
I am using these technologies:
NetBeans IDE 7.0 for Java EE
Glassfish 3.1
I did read that putting the libraries in this directory: <glassfish_home>/domains/domain1/lib may resolve the problem, however there must be a better way.
Any help would be greatly appreciated!
Edited by: 866180 on Jun 15, 2011 2:32 PM

First of all, use a normal font when posting a question. This is just terrible to read.
You have multiple failures here. Did you actually read and try to understand the error?
java.lang.NoClassDefFoundError: com/foo/sdk/core/AbstractClassJava is not going to lie, this class is not on the classpath of the application. Either the jar is missing, the class is missing from the jar or you put the jar in the wrong place. Open up the ear using your favorite zip tool and check out its structure. What is the path to the jar inside it?
Also, open up the META-INF/manifest.mf file inside the EJB jar. Is there a class-path line in there? There shouldn't be!
A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean. Apparently your EJB jar contains not a single EJB or MDB class. Did you forget some annotations perhaps?
Seems to me that your application compiles, but other than that it is very much broken.

Trouble importing an XML that uses DPX sequences

We are doing an offline edit using a DPX sequence. We're testing now to ensure that an XML of the sequence when we're done will work. (Our DPX is in HD, and the online house will be taking a 4K DPX version of the same piece - identical except for the resolution - for the online.) However, when we start up a new project and import the XML to test it out, it isn't making the edits to the DPX sequence that we made. Everywhere there is an edit, it just starts the DPX sequence at the beginning again. This is the same exact HD DPX sequence that we used when we made the edits.
Here is the original project:
http://img607.imageshack.us/img607/1802/i2ht.jpg
Here is what it looks like when we create an XML from that project and import it into a new project:
http://img14.imageshack.us/img14/6389/swfw.jpg
The text block you see in the thumbnail for the videos in the sequence is the slate at the top of the DPX sequence, so you can see that it's just starting at the beginning of the DPX sequence every time there's a cut. What should we be doing differently?

My apologies Jim. My understanding - which was probably incorrect - was that the XML schema that was in use by FCP7, which has since been implemented for use in Smoke, Resolve, Premiere, etc., was developed by Apple. Thanks for educating me!
XML as currently coded cannot convey sequences created from image-sequence-based media.
What has been an issue for me and a few others, which may be in play here, is relinking to media coming from a third party grading session. Smoke, Hiero, Resolve, SpeedGrade can all conform DPXs to an EDL or XML using timecode (independent of reel name, clip name, etc) while Premiere as yet does not. Premiere's relinking struggles if there's any disparity between the source file names and the file names it's relinking to. It would be great to see some more flexibility there, such as timecode-based relinking coupled with optional fields for partial clip name and partial reel name relinking.
Since the original post refers to a third party vendor doing the finish on the project, simply relinking in Premiere may not be an option. If the vendor in question is going to be conforming in either Smoke, Flame or Hiero, just sending an EDL over will just about guarantee a successful conform. I'd contact them and find out what they prefer.
Cheers!
Jon

Updated Projects that used Color Assist Cause FCPX to Crash

Hi All,
After it's release I used Technicolor's now defunct and unsupported Color Assist software to grade a couple of projects. I've recently upgraded those project and events for use with 10.1. The projects and events appear in the browser but show a missing pugin warnning me that Color Assist isn't available.
I'm not worried about retreiving the grade - my loss thanks to Technicolor. I would however like to somehow preserve the project intact for re-grading later.
I've tried removing the Color Assist folder from the Project folder prior to performing an upgrade but no dice, FCPX still crashes.
I'm sure the solution must only involve trashing the right render folders to wipe out any trace of Color Assist from the project. Anyone know which render files/folders I need to trash?
Many thanks!

Yes I too want to know if anyone else here resolved this issue as well.
As OP mentioned, I'd like to preserve the project wihtout FCPX crashing , the grading can go to kingdomcome for all I care
Regards

Values from a java archive file that uses Coherence are null

This is essentially the details of my project.
Check the values in andrew's coherence cluster.
Checkign the values in the stats class.
z:\javaclasses\stats.jar
Some sample code:
-- initialize
/* start the stats class (the fields you want to look) */
Stats.init(StatsField._1_DAY_HIGH, StatsField._1_DAY_LOW,
StatsField.PREV_CLOSE);
-- pulling data
if (Stats.get(sSymbol).PREV_CLOSE != null) {
fValue = Stats.get(sSymbol).PREV_CLOSE;
-- in your .bat file (Before setting the classpaths)
call z:\coherence\bin\prod_setup.bat
set java_opts=%java_opts%
-Dtangosol.coherence.cacheconfig=z:/coherence/cache-config-extend-client.xml
myclasspaths
myclasspaths
myclasspaths
My bat file looks like this.
call z:\coherence\bin\prod_setup.bat
set java_opts=%java_opts% -Dtangosol.coherence.cacheconfig=z:/coherence/cache-config-extend-client.xml
cd \
cd C:\Users\Dan\Documents\Documents_for_4th_Project
SET PATH=%PATH%;Z:\jdk1.7.0\bin
SET CLASSPATH=
SET CLASSPATH=%CLASSPATH%;.
SET CLASSPATH=%CLASSPATH%;z:\javaclasses\stats.jar
SET CLASSPATH=%CLASSPATH%;Z:\coherence\lib3702\coherence.jar
javac ValuesInStats.java
java ValuesInStats
pause
My ValuesInStats.java looks like this below.
* To change this template, choose Tools | Templates
* and open the template in the editor.
//package ValuesInStats;
import stats.*;
import java.io.*;
* @author Dan
public class ValuesInStats
* @param args the command line arguments
private double dayHigh;
private double dayLow;
private double prevClose;
public void startStatClass()
Stats.init(StatsField._1_DAY_HIGH, StatsField._1_DAY_LOW, StatsField.PREV_CLOSE);
public void pullDataFromStatClass()
if (Stats.get("GOOG")._1_DAY_HIGH != null)
dayHigh = Stats.get("GOOG")._1_DAY_HIGH;
if (Stats.get("IBM")._1_DAY_LOW != null)
dayLow = Stats.get("IBM")._1_DAY_LOW;
if (Stats.get("SLB").PREV_CLOSE != null)
prevClose = Stats.get("").PREV_CLOSE;
public static void main(String[] args)
ValuesInStats stat = new ValuesInStats();
stat.startStatClass();
stat.pullDataFromStatClass();
try
PrintWriter inputToFile = new PrintWriter(new BufferedWriter(new FileWriter("C:\\Users\\Dan\\Documents\\Documents_for_4th_Project\\DANS_StatReport.txt")));
inputToFile.println(stat.dayHigh);
inputToFile.println(stat.dayLow);
inputToFile.println(stat.prevClose);
inputToFile.close();
catch(Exception e)
e.getMessage();
e.printStackTrace();
The results i'm getting are included below.
C:\Users\Dan\Documents\Documents_for_4th_Project>call z:\coherence\bin\prod_setup.bat
C:\Users\Dan\Documents\Documents_for_4th_Project>REM
C:\Users\Dan\Documents\Documents_for_4th_Project>REM Call this batch file before setting any PATH or CP or JAVA_OPTS.
C:\Users\Dan\Documents\Documents_for_4th_Project>REM You can override anything you don't like afterwards.
C:\Users\Dan\Documents\Documents_for_4th_Project>REM
C:\Users\Dan\Documents\Documents_for_4th_Project>title
C:\Users\Dan\Documents\Documents_for_4th_Project>set JAVA_HOME=z:\jdk7
C:\Users\Dan\Documents\Documents_for_4th_Project>set JAVA_EXE=z:\jdk7\bin\java_for_.exe
C:\Users\Dan\Documents\Documents_for_4th_Project>set PATH=z:\jdk7\bin
C:\Users\Dan\Documents\Documents_for_4th_Project>for /F "tokens=1,2" %u in ('date /t') do set d=%v
C:\Users\Dan\Documents\Documents_for_4th_Project>set d=10/11/2011
C:\Users\Dan\Documents\Documents_for_4th_Project>set timestr=20111011
C:\Users\Dan\Documents\Documents_for_4th_Project>for /F "tokens=1,2,3 delims=: " %i in ('time /t') do set q=%i%j%k
C:\Users\Dan\Documents\Documents_for_4th_Project>set q=1052AM
C:\Users\Dan\Documents\Documents_for_4th_Project>set datetime=20111011_1052AM
C:\Users\Dan\Documents\Documents_for_4th_Project>echo 20111011_1052AM
20111011_1052AM
C:\Users\Dan\Documents\Documents_for_4th_Project>REM token=14 for vista, 15 for XP
C:\Users\Dan\Documents\Documents_for_4th_Project>for /F "tokens=14,15" %a in ('c:\windows\system32\ipconfig | c:\windows\system32\findstr /R "Address.*XXX.XXX.X."') do (IF "%a" == ":" (set my_ip=%b ) ELSE (set my_ip=%a ) )
C:\Users\Dan\Documents\Documents_for_4th_Project>(IF "XXX.XXX.X.XXX" == ":" (set my_ip= ) ELSE (set my_ip=XXX.XXX.X.XXX ) )
IP=XXX.XXX.X.XXX
C:\Users\Dan\Documents\Documents_for_4th_Project>for /F %i in ('z:\coherence\bin\getpid.exe') do set my_pid=%i
C:\Users\Dan\Documents\Documents_for_4th_Project>set my_pid=1464
C:\Users\Dan\Documents\Documents_for_4th_Project>IF /I "" == "OMS" goto OMS
C:\Users\Dan\Documents\Documents_for_4th_Project>goto DONE
C:\Users\Dan\Documents\Documents_for_4th_Project>REM ---PROD---
C:\Users\Dan\Documents\Documents_for_4th_Project>REM ---PROD---
C:\Users\Dan\Documents\Documents_for_4th_Project>rem ==== COHERENCE ====
C:\Users\Dan\Documents\Documents_for_4th_Project>rem ==== COHERENCE ====
C:\Users\Dan\Documents\Documents_for_4th_Project>set java_opts= -Dtangosol.coherence.localhost=XXX.XXX.X.XXX -Dtangosol.coherence.distributed.localstorage=false -Dtangosol.coherence.member=Dan -Xms -Xmx -server -showversion -Djava.
eferIPv4Stack=true -Dtangosol.coherence.log.level=3 -Dtangosol.coherence.log=z:\oms2\logs\.Dan.XXX.XXX.X.XXX.20111011_1052AM.log -Xloggc:z:\oms2\logs\.Dan.XXX.XXX.X.XXX.20111011_1052AM.gc -Dtangosol.pof.config=z:/coherence/pof-conf
-Dtangosol.coherence.cacheconfig=z:/coherence/cache-config.xml -Dtangosol.coherence.clusteraddress=255.0.0.1 -Dtangosol.coherence.clusterport=54321 -Dtangosol.coherence.cluster=oms_prod -Dtangosol.coherence.rack= -Dtangosol.cohere
te=1464 -Dtangosol.coherence.cacheconfig=z:/coherence/cache-config-extend-client.xml
C:\Users\Dan\Documents\Documents_for_4th_Project>cd \
C:\>cd C:\Users\Dan\Documents\Documents_for_4th_Project
C:\Users\Dan\Documents\Documents_for_4th_Project>SET PATH=z:\jdk7\bin;Z:\jdk1.7.0\bin
C:\Users\Dan\Documents\Documents_for_4th_Project>SET CLASSPATH=
C:\Users\Dan\Documents\Documents_for_4th_Project>SET CLASSPATH=;.
C:\Users\Dan\Documents\Documents_for_4th_Project>SET CLASSPATH=;.;z:\javaclasses\stats.jar
C:\Users\Dan\Documents\Documents_for_4th_Project>SET CLASSPATH=;.;z:\javaclasses\stats.jar;Z:\coherence\lib3702\coherence.jar
C:\Users\Dan\Documents\Documents_for_4th_Project>javac ValuesInStats.java
C:\Users\Dan\Documents\Documents_for_4th_Project>java ValuesInStats
2011-10-11 10:52:21.299/2.277 Oracle Coherence 3.7.0.2 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/Z:/coherence/lib3702/coherence.jar!/tangosol-coherence.xml"
2011-10-11 10:52:21.408/2.386 Oracle Coherence 3.7.0.2 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/Z:/coherence/lib3702/coherence.jar!/tangosol-coherence-override-dev.xml"
2011-10-11 10:52:21.408/2.386 Oracle Coherence 3.7.0.2 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2011-10-11 10:52:21.408/2.386 Oracle Coherence 3.7.0.2 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.7.0.2 Build 25173
Grid Edition: Development mode
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
2011-10-11 10:52:22.625/3.603 Oracle Coherence GE 3.7.0.2 <Info> (thread=main, member=n/a): Loaded Reporter configuration from "jar:file:/Z:/coherence/lib3702/coherence.jar!/reports/report-group.xml"
2011-10-11 10:52:22.844/3.822 Oracle Coherence GE 3.7.0.2 <Info> (thread=main, member=n/a): Loaded cache configuration from "jar:file:/Z:/coherence/lib3702/coherence.jar!/coherence-cache-config.xml"
2011-10-11 10:52:24.029/5.007 Oracle Coherence GE 3.7.0.2 <D4> (thread=main, member=n/a): TCMP bound to /XXX.XXX.X.XXX:8102 using SystemSocketProvider
2011-10-11 10:52:24.560/5.538 Oracle Coherence GE 3.7.0.2 <Info> (thread=Cluster, member=n/a): This Member(Id=9, Timestamp=2011-10-11 10:52:24.482, Address=XXX.XXX.X.XXX:8102, MachineId=27506, Location=process:5892, Role=ValuesInSt
uesInStats, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) joined cluster "cluster:0x96AB" with senior Member(Id=1, Timestamp=2011-10-07 14:15:01.108, Address=XXX.XXX.X.XXX:8088, MachineId=27506, Location=proces
, Role=CoherenceConsole, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2)
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=2, Timestamp=2011-10-07 14:15:44.572, Address=XXX.XXX.X.XXX:8090, MachineId=27506, Location=process:3904, Role=CoherenceConsole)
d Cluster with senior member 1
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=3, Timestamp=2011-10-07 14:21:36.311, Address=XXX.XXX.X.XXX:8092, MachineId=27506, Location=process:628, Role=CoherenceConsole)
Cluster with senior member 1
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=4, Timestamp=2011-10-07 14:21:50.655, Address=XXX.XXX.X.XXX:8094, MachineId=27506, Location=process:4212, Role=CoherenceConsole)
d Cluster with senior member 1
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=5, Timestamp=2011-10-07 14:22:18.338, Address=XXX.XXX.X.XXX:8096, MachineId=27506, Location=process:5224, Role=CoherenceConsole)
d Cluster with senior member 1
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=6, Timestamp=2011-10-07 14:23:41.229, Address=XXX.XXX.X.XXX:8098, MachineId=27506, Location=process:5608, Role=CoherenceConsole)
d Cluster with senior member 1
2011-10-11 10:52:24.591/5.569 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member(Id=7, Timestamp=2011-10-07 14:24:16.971, Address=XXX.XXX.X.XXX:8100, MachineId=27506, Location=process:5924, Role=CoherenceConsole)
d Cluster with senior member 1
2011-10-11 10:52:24.622/5.600 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Cluster with senior member 1
2011-10-11 10:52:24.622/5.600 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
2011-10-11 10:52:24.638/5.616 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Cluster with senior member 1
2011-10-11 10:52:24.638/5.616 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Management with senior member 1
2011-10-11 10:52:24.638/5.616 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Cluster with senior member 1
2011-10-11 10:52:24.638/5.616 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Management with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 7 joined Service Cluster with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 7 joined Service Management with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 4 joined Service Cluster with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 4 joined Service Management with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 5 joined Service Cluster with senior member 1
2011-10-11 10:52:24.653/5.631 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 5 joined Service Management with senior member 1
2011-10-11 10:52:24.669/5.647 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Cluster with senior member 1
2011-10-11 10:52:24.669/5.647 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Management with senior member 1
2011-10-11 10:52:24.669/5.647 Oracle Coherence GE 3.7.0.2 <Info> (thread=main, member=n/a): Started cluster Name=cluster:0x96AB
Group{Address=224.3.7.0, Port=37000, TTL=4}
MasterMemberSet
ThisMember=Member(Id=9, Timestamp=2011-10-11 10:52:24.482, Address=XXX.XXX.X.XXX:8102, MachineId=27506, Location=process:5892, Role=ValuesInStatsValuesInStats)
OldestMember=Member(Id=1, Timestamp=2011-10-07 14:15:01.108, Address=XXX.XXX.X.XXX:8088, MachineId=27506, Location=process:1632, Role=CoherenceConsole)
ActualMemberSet=MemberSet(Size=8, BitSetCount=2
Member(Id=1, Timestamp=2011-10-07 14:15:01.108, Address=XXX.XXX.X.XXX:8088, MachineId=27506, Location=process:1632, Role=CoherenceConsole)
Member(Id=2, Timestamp=2011-10-07 14:15:44.572, Address=XXX.XXX.X.XXX:8090, MachineId=27506, Location=process:3904, Role=CoherenceConsole)
Member(Id=3, Timestamp=2011-10-07 14:21:36.311, Address=XXX.XXX.X.XXX:8092, MachineId=27506, Location=process:628, Role=CoherenceConsole)
Member(Id=4, Timestamp=2011-10-07 14:21:50.655, Address=XXX.XXX.X.XXX:8094, MachineId=27506, Location=process:4212, Role=CoherenceConsole)
Member(Id=5, Timestamp=2011-10-07 14:22:18.338, Address=XXX.XXX.X.XXX:8096, MachineId=27506, Location=process:5224, Role=CoherenceConsole)
Member(Id=6, Timestamp=2011-10-07 14:23:41.229, Address=XXX.XXX.X.XXX:8098, MachineId=27506, Location=process:5608, Role=CoherenceConsole)
Member(Id=7, Timestamp=2011-10-07 14:24:16.971, Address=XXX.XXX.X.XXX:8100, MachineId=27506, Location=process:5924, Role=CoherenceConsole)
Member(Id=9, Timestamp=2011-10-11 10:52:24.482, Address=XXX.XXX.X.XXX:8102, MachineId=27506, Location=process:5892, Role=ValuesInStatsValuesInStats)
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0, BitSetCount=0
TcpRing{Connections=[7]}
IpMonitor{AddressListSize=0}
2011-10-11 10:52:24.872/5.850 Oracle Coherence GE 3.7.0.2 <D5> (thread=Invocation:Management, member=9): Service Management joined the cluster with senior service member 1
2011-10-11 10:52:25.871/6.849 Oracle Coherence GE 3.7.0.2 <D5> (thread=DistributedCache, member=9): Service DistributedCache joined the cluster with senior service member 9
Stats init _1_DAY_HIGH
Stats init _1_DAY_LOW
Stats init PREV_CLOSE
Stats.get() hm has null for GOOG
Stats.get() hm has null for IBM
Stats.get() hm has null for SLB
2011-10-11 10:52:28.605/9.583 Oracle Coherence GE 3.7.0.2 <D4> (thread=ShutdownHook, member=9): ShutdownHook: stopping cluster node
2011-10-11 10:52:28.620/9.598 Oracle Coherence GE 3.7.0.2 <D5> (thread=Cluster, member=9): Service Cluster left the cluster
C:\Users\Dan\Documents\Documents_for_4th_Project>pause
Press any key to continue . . .
I'm not sure why I'm getting null values. Let me know if additional information is needed. Thanks!
P.S. IP Addresses represent XXX.XXX.X.XXX for security purposes.

Here's the details of the stat class from the stats.jar. Thanks!
package stats;
import java.lang.reflect.Field;
import java.util.Date;
import java.util.HashMap;
import java.util.List;
import java.util.Set;
public class Stats implements com.tangosol.util.MapListener, com.tangosol.net.MemberListener {
public String SYMBOL;
public String NAME;
public String CUSIP;
public Long POSITION_LIMIT;
public Float YEAR_HIGH;
public String NEWS_BUY_RATING;
public String NEWS_SELL_RATING;
public String NEWS_NOTES;
public Long AVG_DAILY_VOLUME;
public Float MARKET_CAP;
public Float _1_DAY_GROUP_PERCENT_CHANGE;
public String PRIMARY_GROUP;
public String ZACKS_RANK;
public String FUND_GRADE;
public String CRAMER_CALL;
public Float PREV_CLOSE;
public Float KSLOW;
public Float DSLOW;
public Float _90_DAY_HIGH;
public Float _90_DAY_LOW;
public Float _90_DAY_PERCENT_OF_RANGE;
public Float _52_WEEK_HIGH;
public Float _52_WEEK_LOW;
public Float _52_WEEK_PERCENT_OF_RANGE;
public Date NEXT_EARNINGS_DATE;
public String NEXT_EARNINGS_ANNOUNCEMENT_TIME;
public Object OPENING_INDICATION;
public oms.OrderExchange PRIMARY_EXCHANGE;
public Float _1_DAY_PERCENT_CHANGED;
public Float _1_DAY_PERCENT_CHANGED_TEST;
public Float _1_DAY_HIGH;
public Float _1_DAY_LOW;
public Long POSTMARKET_VOLUME;
public Long PREMARKET_VOLUME;
public Float OPEN_PRICE;
public Integer POSTMARKET_TRADES;
public Integer PREMARKET_TRADES;
public Float POSTMARKET_HIGH;
public Float POSTMARKET_LOW;
public Float PREMARKET_HIGH;
public Float PREMARKET_LOW;
public Float POSTMARKET_VOLUME_WEIGHTED_AVG_PRICE;
public Float PREMARKET_VOLUME_WEIGHTED_AVG_PRICE;
public Float POSTMARKET_AVG_PRICE;
public Float PREMARKET_AVG_PRICE;
public Boolean IS_OPEN_ON_NYSE;
public Boolean IS_HALTED;
public Integer NEWSWARE_STORY_COUNT;
public Float _1_DAY_PERCENT_OF_RANGE;
public Boolean IS_ETF;
public Integer ROUND_LOT_SIZE;
public Integer LOCATED_SHARES_AVAILABLE;
public Boolean IS_OPTIONABLE;
private static HashMap<String, Stats> hm;
private static List<com.tangosol.net.NamedCache> subscribedCacheList;
private static Stats INSTANCE;
private Set<StatsUpdateListener> updateListenerSet;
public Stats() {
//compiled code
throw new RuntimeException("Compiled Code");
public void memberJoined(com.tangosol.net.MemberEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public void memberLeaving(com.tangosol.net.MemberEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public void memberLeft(com.tangosol.net.MemberEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public static Stats get(String string) {
//compiled code
throw new RuntimeException("Compiled Code");
public static void init(StatsField[] sfs) {
//compiled code
throw new RuntimeException("Compiled Code");
private static Field getField(com.tangosol.util.MapEvent me) throws NoSuchFieldException {
//compiled code
throw new RuntimeException("Compiled Code");
private void notifyUpdateListeners(Field field, Object o) {
//compiled code
throw new RuntimeException("Compiled Code");
public void addStatsUpdateListener(StatsUpdateListener sl) {
//compiled code
throw new RuntimeException("Compiled Code");
public void removeStatsUpdateListener(StatsUpdateListener sl) {
//compiled code
throw new RuntimeException("Compiled Code");
private void processInsertOrUpdate(com.tangosol.util.MapEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public synchronized void entryInserted(com.tangosol.util.MapEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public synchronized void entryUpdated(com.tangosol.util.MapEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
public void entryDeleted(com.tangosol.util.MapEvent me) {
//compiled code
throw new RuntimeException("Compiled Code");
}

Help with corrupted nested sequences.

First off, let me say that next project I'm going with Avid.
I have been using nested sequences as sparingly as possible on a long, complicated project, but the few that I have are prone to getting "corrupted" (this is the technical term that Kevin Monahan from Adobe has used to describe what's happening). So it's been recommended that I replace the corrupted sequence. Sure I can just copy the material in the corrupted sequence and place it in a new sequence, but how can I do this without loosing my HOURS of edits with this nested sequence in my main timeline?
Thanks,
Steve Keller

Have you got a backup of your original photos? If so then you can
recreate the catalogue very easily in less than 5 minutes. PSE always
leaves photos in their original location. they are not moved at all.
One should always backup photos, videos, documents, emails etc
separately from applications that created them in the first place.
Disasters happen and we can't always protect from them except to backup
as taught in computing 101 class.

Changes to master nested sequence not updating in new sequence

Good morning - I have spent the past half hour or so searching the forum for this topic but have not found the answer. If the answer exists elsewhere, please point me in that direction; otherwise, here goes:
I created a nested sequence by simply dragging one sequence (A) from the browser into a new sequence (B) in the timeline. Later, I went back to Seq A and replaced all of the audio (which was in-camera audio) with clean audio from a Tascam field recorder. So far so good. However, Seq B still plays the original camera audio and is not reflecting any of the changes I made to Seq A.
I tried deleting audio render files, quitting and restarting FCP, etc., all to no avail. I have the latest versions of the OS and FCP. Any suggestions would be much appreciated.

As you've probably found there are several ways to create/edit nests into sequences. The manual points out an advantage of using nested sequences is you can make a change and that change will be reflected in all the subsequent nests. As you've also found out, this isn't exactly true.
The only way I've found to have communications carry forward to nests from the original sequence is if I edit the sequence into another sequence via the Canvas overlay/edit keyboard shortcuts from the Viewer. I've found dragging and dropping to do as you've found.

Recommended steps to generate a web service using nested complex types

Hello,
I need to generate a web service that uses nested complex types with built in types on the bottom layer. I hve posted an attempt at a WSDL. Please give advice on if I am doing it correctly.
I have the suspicion that I should nest the complex types into the final complex type VendorStockingInterface. Please confirm.
<?xml version="1.0" encoding="utf-8"?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/"
xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns:s0="http://www.openuri.org/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
targetNamespace="http://www.openuri.org/">
<types>
<s:schema targetNamespace="http://www.openuri.org/"
xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="RegisterServiceRequest">
<s:complexType>
<s:sequence>
<s:element name="DeviceCapabilities">
<s:complexType>
<s:sequence>
<s:element name="OSName" type="s:string" nillable="true"/>
 <s:element name="OSVersion" type="s:string" nillable="true"/>
 <s:element name="BRType" type="s:string" nillable="true"/>
 <s:element name="DisplayColors" type="s:string" nillable="true"/>
 <s:element name="DisplayTechnology" type="s:string" nillable="true"/>
 <s:element name="NetworkAccess" type="s:boolean" nillable="true"/>
 <s:element name="DownloadMethod" type="s:string" nillable="true"/>
 <s:element name="DownloadVersion" type="s:string" nillable="true"/>
 <s:element name="Protocols" type="s:string" nillable="true"/>
 </s:sequence>
</s:complexType>
</s:element>
 <s:element name="LicenseType">
<s:complexType>
<s:sequence>
 <s:element name="Licences" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="PriceValue">
<s:complexType>
<s:sequence>
 <s:element name="Value" type="s:float" nillable="false"/>
 <s:element name="CurrencyType" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="RevenueModelType">
<s:complexType>
<s:sequence>
 <s:element name="VSRP" type="RegisterServiceRequest:PriceValue" nillable="true"/>
 <s:element name="WholesalePrice" type="RegisterServiceRequest:PriceValue" nillable="true"/>
 <s:element name="VendorSplitPercentage" type="s:float" nillable="true"/>
 <s:element name="VendorPurchasePrice" type="RegisterServiceRequest:PriceValue" nillable="true"/>
 <s:element name="License" type="RegisterServiceRequest:LicenseType" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="VendorItemIdentifierType">
<s:complexType>
<s:sequence>
 <s:element name="VendorProductDisplay" type="s:string" nillable="false"/>
 <s:element name="VendorProductVersion" type="s:string" nillable="false"/>
 <s:element name="VendorProductCode" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="VendorBriefType">
<s:complexType>
<s:sequence>
 <s:element name="VendorID" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="VendorItemBriefType">
<s:complexType>
<s:sequence>
 <s:element name="VendorProductID" type="RegisterServiceRequest:VendorItemIdentifierType" nillable="false"/>
 <s:element name="VendorID" type="RegisterServiceRequest:VendorBriefType" nillable="false"/>
 <s:element name="VendorDescription" type="s:string" nillable="true"/>
 <s:element name="VendorPricing" type="RegisterServiceRequest:RevenueModelType" nillable="false"/>
 <s:element name="DownloadURL" type="s:string" nillable="true"/>
 <s:element name="ShortCode" type="s:string" nillable="true"/>
 <s:element name="ApplicationCode" type="s:string" nillable="true"/>
 <s:element name="DRMMethod" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="ContentType">
<s:complexType>
<s:sequence>
 <s:element name="Categorization" type="s:string" nillable="false"/>
 <s:element name="MIMEType" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
 <s:element name="VendorStockingInterface">
<s:complexType>
<s:sequence>
 <s:element name="VendorItemInfo" type="RegisterServiceRequest:VendorItemBriefType" nillable="false"/>
 <s:element name="ProductType" type="RegisterServiceRequest:ContentType" nillable="false"/>
 <s:element name="DeviceRequirements" type="RegisterServiceRequest:DeviceCapabilitiesType" nillable="true"/>
 <s:element name="VendorPricing" type="RegisterServiceRequest:RevenueModelType" nillable="false"/>
 <s:element name="ProgramMemory" type="s:int" nillable="true"/>
 <s:element name="DataMemory" type="s:int" nillable="true"/>
 <s:element name="Author" type="s:string" nillable="true"/>
 <s:element name="Language" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="RegisterServiceResponse">
<s:complexType>
<s:sequence>
<s:element name="Message" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</types>
<message name="RegisterServiceSoapIn">
<part name="parameters" element="s0:RegisterServiceRequest"/>
</message>
<message name="RegisterServiceSoapOut">
<part name="parameters" element="s0:RegisterServiceResponse"/>
</message>
<portType name="RegisterServiceSoap">
<operation name="RegisterService">
<input message="s0:RegisterServiceSoapIn"/>
<output message="s0:RegisterServiceSoapOut"/>
</operation>
</portType>
<binding name="RegisterServiceSoap" type="s0:RegisterServiceSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="RegisterService">
<soap:operation soapAction="http://www.openuri.org/RegisterService" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="RegisterService">
<port name="RegisterServiceSoap" binding="s0:RegisterServiceSoap">
<soap:address location="http://localhost:7001/RegisterService.jws"/>
</port>
</service>
</definitions>
I'd like the the consumer of the web service to send it a document with the fields formatted to the VendorInterface complextype which contains the other complextypes. In return the consumer will get another document with some acknowledgement messages.
To make this happen I'd like to generate the web service, creating the complex type classes and XMLBeans. I'd like advice on the steps to take once I get a good WSDL.
There is also the option to go from the other direction. Is it better to attempt to create a schema XSD document instead and use that to work towards the web service and WSDL? If so, could someone give an example of how to format an XSD using my example needs.

I think I have got it all in place, though I have not tested it as of yet. For others who are looking at this, here is my XSD file from which all my complextypes were generated and lastly here is the actual web service file.
?xml version="1.0"?>
<xs:schema targetNamespace="http://openuri.org/RegisterService"
xmlns:rs="http://openuri.org/RegisterService"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
xmlns:tns="http://temp.openuri.org/VerizonBOBO/RegisterServiceRequestDocument.xsd">
<xs:element name="RegisterServiceRequest" type="rs:VendorStockingInterface"/>
<xs:complexType name="DeviceCapabilitiesType">
<xs:sequence>
<xs:element name="OSName" type="xs:string" nillable="true"/>
<xs:element name="OSVersion" type="xs:string" nillable="true"/>
<xs:element name="BRType" type="xs:string" nillable="true"/>
<xs:element name="DisplayColors" type="xs:string" nillable="true"/>
<xs:element name="DisplayTechnology" type="xs:string" nillable="true"/>
<xs:element name="NetworkAccess" type="xs:boolean" nillable="true"/>
<xs:element name="DownloadMethod" type="xs:string" nillable="true"/>
<xs:element name="DownloadVersion" type="xs:string" nillable="true"/>
<xs:element name="Protocols" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="LicenseType">
<xs:sequence>
<xs:element name="Licences" type="xs:string" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PriceValue">
<xs:sequence>
<xs:element name="Value" type="xs:float" nillable="false"/>
<xs:element name="CurrencyType" type="xs:string" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RevenueModelType">
<xs:sequence>
<xs:element name="VSRP" type="rs:PriceValue" nillable="true"/>
<xs:element name="WholesalePrice" type="rs:PriceValue" nillable="true"/>
<xs:element name="VendorSplitPercentage" type="xs:float" nillable="true"/>
<xs:element name="VendorPurchasePrice" type="rs:PriceValue" nillable="true"/>
<xs:element name="License" type="rs:LicenseType" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="VendorItemIdentifierType">
<xs:sequence>
<xs:element name="VendorProductDisplay" type="xs:string" nillable="false"/>
<xs:element name="VendorProductVersion" type="xs:string" nillable="false"/>
<xs:element name="VendorProductCode" type="xs:string" nillable="false"/>
 </xs:sequence>
</xs:complexType>
<xs:complexType name="VendorBriefType">
<xs:sequence>
<xs:element name="VendorID" type="xs:string" nillable="false"/>
 </xs:sequence>
</xs:complexType>
<xs:complexType name="VendorItemBriefType">
<xs:sequence>
<xs:element name="VendorProductID" type="rs:VendorItemIdentifierType" nillable="false"/>
<xs:element name="VendorID" type="rs:VendorBriefType" nillable="false"/>
<xs:element name="VendorDescription" type="xs:string" nillable="true"/>
<xs:element name="VendorPricing" type="rs:RevenueModelType" nillable="false"/>
<xs:element name="DownloadURL" type="xs:string" nillable="true"/>
<xs:element name="ShortCode" type="xs:string" nillable="true"/>
<xs:element name="ApplicationCode" type="xs:string" nillable="true"/>
<xs:element name="DRMMethod" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ContentType">
<xs:sequence>
<xs:element name="Categorization" type="xs:string"/>
<xs:element name="MIMEType" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="VendorStockingInterface">
<xs:sequence>
<xs:element name="VendorItemInfo" type="rs:VendorItemBriefType"/>
<xs:element name="ProductType" type="rs:ContentType"/>
<xs:element name="DeviceRequirements" type="rs:DeviceCapabilitiesType"/>
<xs:element name="VendorPricing" type="rs:RevenueModelType"/>
<xs:element name="ProgramMemory" type="xs:int"/>
<xs:element name="DataMemory" type="xs:int"/>
<xs:element name="Author" type="xs:string"/>
<xs:element name="Language" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RegisterServiceResponse">
<xs:sequence>
<xs:element name="Message" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
The Web Service File:
import org.openuri.registerService.RegisterServiceResponse;
import org.openuri.registerService.RegisterServiceRequestDocument;
import com.verizon.hp.registerservice.*;
public class RegisterService implements com.bea.jws.WebService
static final long serialVersionUID = 1L;
* @common:operation
* @jws:protocol form-post="false" form-get="false"
public org.openuri.registerService.RegisterServiceResponse RegisterService(org.openuri.registerService.RegisterServiceRequestDocument RegisterServiceDoc)
VendorStockingInterface vsInterface = (VendorStockingInterface)RegisterServiceDoc.getRegisterServiceRequest();
System.out.println(vsInterface.toString());
com.verizon.hp.registerservice.RegisterServiceResponse serviceResponse = new com.verizon.hp.registerservice.RegisterServiceResponse();
serviceResponse.setMessage("Register New Service Message has been received successfully");
org.openuri.registerService.RegisterServiceResponse response = (org.openuri.registerService.RegisterServiceResponse)serviceResponse;
return response;
}

Flash frame in nested sequence won't go away

When I open up the sequence to play it, it's fine. When the sequence itself is played, It flashes over the first part of her sentence, then cuts in as she's saying a particular word.
I dont show that there's anything to be rendered. I've done everything i can think of, including exporting and hoping that would fix it, closing out fcp and reloading the project, etc.
Anyone ever run into this?

Are you saying that your nested sequence is starting at a later point than the inpoint of the first clip contained within it? A nested sequence can be trimmed just like a regular clip, so you may just need to drag its in-point to the left (or perform a slip-edit).
If this is not the problem, you could certainly have a phantom render file (this happens most often with nested sequences). You can usually kill it by forcing FCP to re-render that section of the timeline. There are a billion ways to do this–my favorite is selecting a clip (or range of clips) located on the section of your timeline where the phantom is hanging out, then hit Ctrl-B twice to toggle their visibility on and off. A fresh re-render of that timeline section should confirm that your phantom has finally been released to render file heaven.
Zap
Dual 2 GHz PowerPC G5 Mac OS X (10.3.6)

Archiving Projects that use Nested Sequences

Similar Messages

Maybe you are looking for