Archiving SRM EBP and SUS Data at End of Contract Period

Hi Team,
We are implementation SRM EBP and SUS solution to one of our Customer.
Below is our Landscape Details
SRM 7.01 SP09
Portal 7.3
SP08
MDM 7.1 SP07
We have deployed all the application in our Data Center and customer have signed a 5 contract to use the solution. At the end
of the 5 years, if the customer wants to move to other solution, they the want the master and all SRM related datas to be archived and copied in
a media, where they can retain for 7 years.
Please confirm how this can be achived the SRM solution
Regards
Ponnusamy

Hi Experts,
Can you please help.
At the end of contract, period, if customer wants to migrate data from SAP SRM to some other SRM system, how it can be achieved.
Regards
Ponnusamy

Similar Messages

  • SRM, ROS and SUS scenario question

    Hello Experts,
    We are in the process of implementing MDM, ROS, EBP and SUS scenario in our present project. I went through the documentation. I have couple of questions.
    1. Do we need to have seperate clients for ROS and SUS. What is the best practise.
    2. Since we have SUS, once I transfer BP from ROS to EBP, check the portal vendor box, I would like to know how the registration code will be sent to supplier. Do we need to create the userid in EBP or with the receipt of registration code supplier will be able to create his first initial userid? Also how we can implement this with CUA and EP as part of landscape?
    3. Also since we have MDM, how the new BP information can be migrated or mapped in MDM and how new BP can be sent to backend system? I understand there is BP monitor to check and approve the changes, but how the new BP will be transferred? Do we need to develop new XI message for this? if Yes, from where that can be managed? from EBP or MDM?.
    I searched through help.sap.com for any documentation but no success.
    Thanks in advance
    Vijay.

    Hi,
    1.Refer the foll thread:
    Re: Supplier Registration without SUS or XI?
    2.For supplier registration,SUS is not mandatory.You need to configure ROS for this scenario.The extrenal vendors will register in ROS and then be replicated to R/3.
    You can use EBP only for Supplier registration.
    SUS,ROS and Bidding engine make up the SRM server 5.5/EBP component of SRM 5.0.
    Pls refer the foll link for the complete process:
    http://www50.sap.com/businessmaps/8F152C1AE8F1426FA3B442F905815F54.htm
    For detailed settings/config  of supplier registration,refer the foll threads:
    Re: Not able to transfer suppliers from ROS to EBP
    problems with ROS_PRESCREEN application for screen suppliers and manage bp
    Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
    Supplier Directory
    Re: Supplier Self registration
    Re: SRM Supplier registration config
    Re: External Web Service setting for Supplier Registration ROS to EBP
    Re: Problems when transferring supplier from ROS to EBP...
    3.Not worked on MDM so cant help you on this.
    BR,
    Disha.
    Do  reward points for useful answer

  • EBP and SUS in same client

    Hi,
    If we habve EBP and SUS in same client do we need XI for connecting the two systems.
    Thanks,
    Manu

    sap OPTIONS TO OUR CUSTOMERS
    1. EBP and SUS on the same server but different clients
    2.EBP and SUS on different server
    3 EBP and SUS in one client: not recommended, only for test systems
    THANKS
    MUTHU

  • XI onfiguration in EBP and SUS systems

    Hi!
    I am configuring XI in EBP and SUS systems to be able to send POs from EBP to SUS and to get PO responses from SUS to EBP. Also we would like to have ASN creation in SUS funtionality to create inbound deliveries in ERP system, because we are running ECS.
    I have created HTTP (type H) RFC to XI system (XI_INTEGRATIONSERVER) and also configure integration engine via transaction sxmb_adm. But when I try to test RFC connection to XI system I always get the following error message:
    ICM_HTTP_CONNECTION_FAILED
    Could you please help me to fix this issue?
    Thanks and Regards,
    Siarhei

    do you also see any other message along with this?
    like HTTP 401? or something like that?
    and also make sure that the user --> you sepcify on the logon&security tab is correct.
    and this user should be available on the XI system -->and should have role ---> SAP_XI_APPL_SERV_USER
    Edited by: khan voyalpad usman on Apr 9, 2008 9:59 PM

  • RFC Adapters for EBP and SUS systems

    Hi!
    We have Extended Classic Scenario up and running and now configuring SUS integration. We have done SLD configuration already and via TR SLDCHECK (has been executed on SRM server) has seen that XI connection is fine.
    Now we have a question whether we need to configure RFC adapters for SUS and EBP systems? If yes, how can we do this?
    Best Regards,
    Siarhei

    you need to define RFC connections between SUS and EBP  , only if you want user synchronization between the systems....
    connection should be of type --> ABAP CONNECTIONS --> type 3
    and this is only optional and not mandatory .
    you can find more details at the following customizing entry..
    TRANSACTION SPRO
    --> Supplier Relationship Management --> Supplier Self-Services --> Master Data --->
    Maintain Systems for Synchronization of User Data

  • EBP and SUS in Classic Scanerio !!!

    Hello SRM Experts,
    Is it possible to implement supplier enablement (SUS) with EBP in classic scenario.  As far as I know there are two scenario in which SUS can be implemented.
    1. EBP-SUS Scenario :-Used for Procurement of Services and Indirect Materials.
    2. SUS-MM Scenario :-  Used for Procurement of Direct Materials.
    Currently we are in classic scenario SRM3.0 and want to upgrade to SRM 5.0 with SUS/LAC etc.. so we if we implement EBP-SUS scenario how the vendor will send purchase order/Response to EBP as in classic the PO is in R/3 not in EBP. Also in this case what all functionalty will the vendor (supplier) or  buyer (Purchaser) will have than the normal EBP-SUS scanerio.
    Thanks for your help.
    Prashant

    Hi Prashant,
    I had the same situation - based on testing and discussion during my running project OSS Note "543544 SUS ECS for EBP not supported" has been issued.
    Scenario SRM-SUS is NOT running in extended classic scenario.
    You can give it a try in classic.
    We are using SRM-MM scenario and have a working solution for indirect as well direct materials up and running.
    Kind regards,
    Claudia
    Please reward point when answer was helpful - thanks!

  • Doubts about BP number in SRM and SUS

    Hello everyone,
    I have some doubts about the BP number, especially for Vendors.
    I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
    - Can I have the same BP number in SRM and SUS?? Or is it going to be different??
    - When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
    - When is it necessary to replicate vendors from SRM to SUS??
    Thanks
    Ivá

    Dear Ivan,
    Here is answer to all your questions. Follow these steps for ROS configuration:
    Pls note:
    1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
    2. No need of XI to transfer new registered vendor from ROS to EBP
    Steps to configure scenario:
    1. Make entries in SPRO --> "Define backend system" on both clients.
        You will ahev specify logical systems of both the clients (ROS as well as EBP)
    2. Create RFCs on both clients to communicate with each other
    3. In ROS client create Service User for supplier registration service with roles:
        SAP_EC_BBP_CREATEUSER
        SAP_EC_BBP_CREATEVENDOR
        Grant u201CS_A.SCONu201D profile to the user.
    4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
    5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
        attributes. create vendor org structure in ROS client
    6. Create your ROS registration questionnaires and assign to product categories- in ROS client
    7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
        defined as supplier directory in SRM server - EBP client.
        Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
        Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.) 
    8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
    9. Modify purchaser role in EBP client:
        Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
    10.Maintain organizational data in make settings for business partner
    Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
    11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
    I hope this clarifies all your doubts.
    Pls reward points for helpful answers
    Regards,
    Prashant

  • EBP - XI - SUS configuration

    Hi,
    This is regarding configuration of SUS-XI-EBP. We are using EBP4.0.
    As per the configuration Guide SUS and EBP should be two different logical systems. But SUS is part of our SRM (EBP) installation and SUS related IMGs are available in SRM @ "SAP Implementation Guide --> Supplier Relationship Management --> Supplier Self-Services.
    In turn SUS and EBP are the same logical system in our landscape.
    i) Is this right or am I missing anything?
    ii) If SUS and EBP are the same logical system, then we are getting problem with the following configurations ...
         a) TWPURLSVR table in SRM can't have two separate entries each for EBP and SUS. But looks like this is required to get SUS portal active.
         b) unable to create Technical & Business systems in SLD for both EBP and SUS. But as per XI configuration there should be two separate SAP systems SUS & EBP.
    Any reply is highly appreciated.
    Regards,
    Soumendu

    Is there an answer to the question "Do we need multiple Logical Systems?" when SUS and EBP are on a single server and client?
    Also, what does the configuration of technical and business systems look like in the SLD?
    Currently I have gone through the whole Service Procurement: Configuration Guide (Release SRM 4.0).  I have not been able to have a Purchase Order successfully sent from EBP => XI => SUS.  Useing SLDCHECK I can confirm that the connection to the SLD is good and that the connection to XI is good.
    I beleive the breakdown is in the makeup of my logical systems.  Or possibly in the SLD but I cannot follow the guide to make the correct configurations.

  • EBP SUS scenario ---sending a PO output from EBP to SUS

    Hi All,
    We are working on EBP SUS scenario with SRM 5.0 and ECC6.0 as the backend.
    We are creating a PO in the EBP which is to be sent to SUS for creating a POR in SUS from vendor.
    1) How do we configure the PO output from EBP to SUS system?
    We could see one method call in Set output actions and output format for sending XML purchase orders. How do we configure this to send it to SUS.
    2) Is it possible to have EBP and SUS in one client where from we will create a PO and send it to SUS?
    Thanks in advance.
    Best regards,
    Sridhar.

    hi,
    there is one customizing setting available --> you need to set this in your SRM system
    transaction --> spro ---> supplier relationship Management --> SRM Server --> cross application basic settings -->
    Set output actions and output format --->Condition dependent document output
    in this setting select --> purchase order ---> you can see four actions --->
    for the last action --->Method call ---> Time of processing ---> should be -->Processing when saving document.
    2) it is possible to have SUS and EBP in same client.
    You can refer to few notes available on service market place.
    ---> it is not to be used for productive use --> only for demo purpose.
    one thing i remember is --> the system type in the scenario is EBP_SUS ( One client EBP and SUS )
    Edited by: khan voyalpad usman on Feb 19, 2008 12:59 AM

  • Transfer PO from EBP to SUS (one client)

    Hello,
    We have EBP and SUS in the same client (SRM 5.00 – SRM server 5.5).
    We are trying to transfer PO from EBP to SUS.
    I am searching an answer to the subsequent questions:
    1. How should be started the PO transfer from EBP to SUS? We know that this transfer is made with XI and “PurchaseOrderRequest_Out” – “PurchaseOrderRequest_In” interfaces but what event should start “PurchaseOrderRequest_Out” interface? We know that “PurchaseOrderRequest_Out” interface is also started by EBP output process instead of printing, should we use this functionality to start this transfer?
    2. We have tried to set the process using the output message (instead of printing) but the “PurchaseOrderRequest_In” interface gives us this error:
    An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company
    Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
    We cannot use transaction BBP_SUS_BP_ADM because EBP and SUS are in the same client (we receive this error: “If SUS and EBP are in same client, create the company in EBP”) and in EBP the ordering party business partner is already a company (if we make a search for “Purchasing Company” in transaction “Manage business partners” we can find the ordering party business partner). We have also run BBP_SP_COMP_INI transaction for this purchasing company business partner.
    Any suggestion?
    Thank you for your help.
    Marco.

    Hi
    <b>These are few transactions available in SRM 5.5 system related to SUS.</b>
    Transactions                       Description
    BBP_NUM_SUSASN       Number Range Maintenance: 'SUSASN'
    BBP_NUM_SUSCF        Number Ranges Maintenance: 'SUSPO'
    BBP_NUM_SUSINV       Number Ranges for 'SUSINV'        
    BBP_NUM_SUSPCO       Number Ranges for 'SUSPCO'        
    BBP_NUM_SUSPO        Number Ranges Maintenance: 'SUSPO'
    BBP_SUS_BP_ADM       Manage Business Partners          
    BBP_NUM_SUSPCO       Number Ranges for 'SUSPCO'           
    BBP_NUM_SUSPO        Number Ranges Maintenance: 'SUSPO'   
    BBP_SP_COMP_INI      Replication of Companies and Empl.   
    BBP_SP_SUPP_INI      Download Vendors for Service Portal   (Replicate Vendors)
    BBPPCO_PO            Purchase Order Confirmation: Call PO   
    BBPPO01              Purchaser Cockpit                      
    BBP_CTR_EXT_PO       Display Contract from PO and SOC       
    BBP_NUM_PO           Purchase Order Nr Range Maintenance    
    BBP_NUM_SUSPO        Number Ranges Maintenance: 'SUSPO'     
    BBP_PD_PO_ERRORLOG   Starts Entry Screen for Error Log      
    BBP_POC              Process Purchase Order                 
    BBP_POC_DISPLY       Display Transaction for the PO         
    BBP_POC_EDIT         Change Purchase Order                  
    BBP_PO_ACTION_CONF   Configure Action Conditions            
    BBP_PO_ACTION_DEF    Define Action Profiles                 
    BBP_TRIGG_PO         Output Control Purchase Order         
    <b>Please try them out.</b>
    When you are facing the problem, please elaborate with steps ?
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS

    Hi Masters of SRM.
    could you please show how make the configuration in XI into Builder configurations
    the scenario is SRM/ebp -
    > XI -
    > SRM/SUS
    any guide because I have the guide for the ERP----> XI -
    >SUS. but does not my requirement.
    the both systems are in same box but different client.
    thanks for yours atentions

    Thanks: Nichil.
    I  follow  your instructions.,  when I make simulation in Generation Log. show all lights in yellow color for example:
    Receiver Determination(s):
      | SRD_009 | PurchaseOrderRequest_Out | * | *
    Analysis
    Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
    Results
    The reused receiver determination is already assigned to the configuration scenario
    Notes
    Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
    I am  message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
    but no show an error or problems only stay  in Recorded Status , othe observation into the SXMB_MONI  the fiel Receiver component and Receiver Interface are empty,  
    what you suggets ?
    best regards.

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • Classic Scenarion with MM-SUS (SUS-ECC-SRM/EBP)

    Hi SRM Gurus,
    We are going for SRM Classic Scenario with MM-SUS . SRM 7.0 with ECC 6.0 (Ehp4).
    Here ECC will be connected to SRM and SUS ,i..e SUS-ECC-SRM.
    I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems.
    1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ?
    2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ?
    3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ?
    Can anyone please confirm /suggest , whether this happens or not ?
    Regards
    NAP

    Narendra
    I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems. - EVERY DOCUMENT IS NOT CREATED IN 2 OTHER SYSTEMS. SRM PO GOES TO ECC AS CLASSIC PO. THIS CLASSIC PO IS SENT TO SUS WHERE IT CREATES A SALES ORDER FOR VENDOR. SO ITS NOT REALLY EVERY DOCUMENT IN TWO OTHER SYSTEMS
    1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ? - ECC PO WILL BE SENT TO SUS. SRM-ECC INTERFACE REMAINS SAME HERE. THERE IS NO COMMUNICATION BETWEEN SRM AND SUS
    2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ? - CONFIRMATION CAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. CONFIRMATION CREATED IN SRM AND SUS WILL RESULT IN CREATION OF GOODS MOVEMENT IN ECC. GOODS MOVEMENT CREATED IN ECC WILL BE ONLY UPDATED AS A  KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
    3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ? - INVOICECAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. INVOICE CREATED IN SRM AND SUS WILL RESULT IN CREATION OF MM INVOICE IN ECC. INVOICE CREATED IN ECC WILL BE ONLY UPDATED AS A  KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
    I hope it clears your doubts....
    Regards
    virender Singh

  • FORMS in SRM EBP & SRM SUS

    Hi ,
    Supplier want to print Invoice / PO from SUS or Buyer want to print PO from SRM -EBP itself...in this case ,can anyone confirm me, whether we need to "define and use"  separte Forms/ Scripts for Purchasing documents like PO, Invoice ..etc in SRM EBP & SRM SUS  , other than that we use in backend ECC system ?
    Thank you in advance...
    Regards
    NAP

    You must need to maintain a specific smart form for PO/Invoice Output in SRM.
    Smartform/Script defined in ECC cann't be used for output in SRM.
    Sandip

  • Sending RFQs from SRM EBP to SRM SUS

    Hi All,
    Am having scenario that i need to send RFQs from SRM EBP to SRM SUS.
    & SAP provided Standard Content & that was imported in to IR.
    In EBP I have Standard Interface for RFQ as RequestForQuotation_Create_Out in namespace http://sap.com/xi/EBP.
    In SUS am not having such type of standard interface as RequestForQuotation_Create_in.
    Can anybody please tell me which interface i can use or what terminology is using for RFQ in SUS.
    Best Regards
    siva

    Hi,
    Thanks for reply.
    We have done following
    1.Customer Settings - https://sandboxsrm5.bhelhyd.co.in:8400/sap/bc/gui/sap/its/bbp_bid_inv
    2. Maintain Systems for Synchronization of User Data -
    Function modules for Create, Change , Delete has been given with Activation & User procurement BP ID ticked.
    3. System parameter
    login/accept_sso2_ticket: 1
    login/create_sso2_ticket: 2
    4. STRUSTSSO2 - Can please elaboarte what exactly  we need to do?
    5. We have given Roles SAP_EC_BBP_BIDDER & SAP_EC_SUS_BIDDER to vendor in SUS.
    We are not able see bids in Vendor login in SUS. but we are able to see PO's in same login.
    Regards,
    Shiva

Maybe you are looking for