Archiving XI messsages - FTP location

Hi all,
I am trying to do archiving of XI messages. I was sucessful in doing it to a local directory.
But I would like to write them to a FTP location.
Could any please help me with this?
reg

Hi,
Archiving of XI messages can be done on FTP server by selecting the "Archive Files on FTP Server" check box in the sender communication channel.
Hope this will help u.
Regards,
Geetha.

Similar Messages

Reading Files from an FTP location based on Timestamp

Hi,
I have a requirement of reading files from an FTP location. The files should be read in the order they were saved in the folder. Can someone tell me how to solve this?
Thanks,
Ravi

Hi Arik,
Thanks for your reply. I tried doing what u said, but it isn't working. My requirement is to List the files in the folder using FTP adapter and get the file name with the least file stamp from the FTP adapter and pass the FileName dynamically to another FTP adapter which reads the file based on the FileName. When i tested after including the property (for listing the files) you mentioned, it is giving the following error (copied from flow trace):
<messages>
<input>
<Invoke_getFileListFTP_FileListing_InputVariable>
<part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/APP_SequentialFileTransfer/PRJ_SequentialFileTransfer/WS_GetFileList_FTP"/>
</part>
</Invoke_getFileListFTP_FileListing_InputVariable>
</input>
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured
during invocation of JCA binding: "JCA Binding execute of
Reference operation 'FileListing' failed due to: Exception
occured when binding was invoked. Exception occured during
invocation of JCA binding: "Could not instantiate
InteractionSpec
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec due
to: Cannot set JCA WSDL Property. Error while setting JCA
WSDL Property. Property setListSorter is not defined for
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
verify the spelling of the property. ". The invoked JCA
adapter raised a resource exception. Please examine the above
error message carefully to determine a resolution. ". The
invoked JCA adapter raised a resource exception. Please
examine the above error message carefully to determine a
resolution.</summary>
</part>
<part name="detail">
<detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL
Property. Property setListSorter is not defined for
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
verify the spelling of the property.</detail>
</part>
<part name="code">
<code>null</code>
</part>
</bindingFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>
Thanks,
Ravi
Edited by: Ravi Santosh on Apr 24, 2012 11:02 PM

Multiple FTP locations on different drives in Server

I've been working to set up an older Power Mac as a location to back-up my ReadyNAS. The ReadyNAS has an automated function for FTP back-up to an FTP location on my network.
I've put two 1.5TB drives in the OS X server. I have about 1.7TB of data on the ReadyNAS. I had hoped to backup about half of that to each of the drives in the Power Mac Server.
However, I can't figure out how to set up 2 FTP Share Point locations, one on each of the drives, so that I can set the ReadyNAS to back up some of its directories to one drive and other directories to the other.
The data is actually mostly static. Once I do the initial backup the incremental ones (what's changed) will be relatively small.
Does anyone know how to set up multiple FTP share points on different OS X Server drives?
Thank you in advance for any enlightenment.

Thank you for the quick response. My problem is how to have the system "know" which backup job it is and switch (without user intervention) to the right Share Point and drive.
I have 6 shares on the NAS with ~760GB and would like to have those backed up to Drive 1. Then when the job starts with the 1 share with 800GB I want that to back up to Drive 2.
That's what I can't figure out how to do automatically. It seems like you have to manually go in and change the Share Point and then manually start the job.
Is there a way to do that in OS X Server without me getting involved?
Thanks again,
BflatBlues

ABAP Report to be Placed in Customer/Vendor FTP Location

Dear Experts,
i have a requirement, i need to send the ouput of a report directly to FTP location of Vendor/Customer, Kindly guide me how to go about this.
Thanks in Advance,
Lokesh

Dear Lokesh,
Welcome to SDN.
Find Below Blog by Ramesh Babu Chirumamilla, which really helped me a lot.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0286339950DB11362844916095533795End?blog=/pub/wlg/5564
Thanks,
Santosh

How to Table data directly stored as file in FTP location

Hi All,
In my process i need to convert table into csv file,i know how to convert as file,but the file will stored into FTP location directly,can any one help regarding this...
Thanks in Advance...
Edited by: 947267 on Oct 26, 2012 2:46 AM

Hi,
I think you will have to store it locally first and then use the OdiFtpPut Tool in a package.
Does your requirements allow that ?
Regards,
JeromeFr

Creating same files on Different FTP Locations

Hi All,
My scenario is like this
IDOC which is coming from SAP has to be sent to two FTP locations (XYZ20082210.dat both same structures)...
Can any one please give me the best approach to handle this...
I know i can do this by creating in two ways
1) Using 1:N mapping
but this also i dont think the right approach as i need to duplicated the same Message Type and rename into 2 Message Type and use in the 1:N mapping.
2) creating 2 Message Mappings and two Interface mappings and two recievers ..
But this one XI processess the Mappings two times which is not good as we recieve multiple Idocs at a time...
Please suggest me a suitable approach for which way i can achieve by more Optmizing ...
Thanks and Regards,
sridhar reddy

Hi Sridhar,
If you want to work out this issue using OS command, then you configure your receiver file adapter to place the file in one folder say 'Source' . Let your two destinations be Target 1 and 2 in the network. Paste the below two lines in notepad, edit the path names and save as .bat extension.
xcopy D:\Source\.* "
NetworkPath\Target1"*
xcopy D:\Source\.* "
NetworkPath\Target2"*
If you receiver folders are in Windows network :
You should run the above mentioned bat file to copy your messages to the destination in network.
Note : XI can NOT execute a OS command/ shell script on the receiver FTP server. The OS Command for the file adapter only runs on the system in which the Adapter Framework is running.
If you receiver folders are in FTP Server :
Refer this link :
http://www.circa.ufl.edu/handouts/networks/ftp.html

Downloading text file to ftp location

Hi Everyone,
Could you please guide me for the following query:
I am trying to send the output of a sap program in a text file to ftp location. In that, while passing the following parameter the program is allowing me to download the file to ftp location:
CALL FUNCTION 'FTP_CONNECT'
       EXPORTING
         user            = userid
         password        = password
         host            = 'IPADDRESS'
         rfc_destination = 'SAPFTP'
       IMPORTING
         handle          = mi_handle
       EXCEPTIONS
         not_connected   = 1
         OTHERS          = 2.
Through this way i am able to download the file to ftp location(as per ipaddress).
But when trying to download the file in a folder on the same ftp location it is not doing that.
The parameters, which i am passing are described below:
CALL FUNCTION 'FTP_CONNECT'
       EXPORTING
         user            = userid
         password        = password
         host            = 'IPADDRESS/Folder_Name'
         rfc_destination = 'SAPFTP'
       IMPORTING
         handle          = mi_handle
       EXCEPTIONS
         not_connected   = 1
         OTHERS          = 2.
Please guide.
Thanks and Regards

Hi,
While using CONNECT, we do not have to give the folder. It should only be the server / ip address.
While using FTP_COPY, we can give the folder name in parameter FILE_DESTINATION.
regards,
amit m.

Load some flat files from ftp location

HI,
I have requirement, i want to load the some flat files from ftp location. but problem is in that ftp location i have multiple files.i want to load flat files starts with file name with numeric. otherwise i have apart from these start with numeric files .
i have remain 2 flat files with constant name. i need to load flat files starts with file name with numeric or i need to leave these 2 constant files then need to load remain start with numeric files. how to achive this in ssis for each loop container.

See these two examples:
http://microsoft-ssis.blogspot.com/2012/01/custom-ssis-component-foreach-ftp-file.html
http://microsoft-ssis.blogspot.com/2011/08/foreach-ftp-file-enumerator.html
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

ALE Configuration to Download the IDOC to a FTP Location

Hello SDN,
I need to generate the IDOCs and save them in text format onto an FTP Location specified by the client.
I understand, I need to setup the an TCP/IP RFC Destination and Create a FIle Port Specifying the FTP directory path.
Please suggest the necessary setup/configuration for the same along with checkpoints.
Thanks,
Manu
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Apr 7, 2011 9:49 AM

Hi,
Guess it looks like the output is getting proposed but its not getting processed. Check the output type configuration. Check the TIme Settings in the output type configuration.
It is possible to set the Time when the output must be processed. Is it on SAVE or is it set to other settings. If its set to via background job then the background job must be run to process the output types.
Check and let me know if all is fine at the output type configuration.
Cheers
VJ

ABAP Code for loading the flat files kept at FTP locations

Hi all,
I need to automate the process of data loading via flat files with the help of process chains , with respect to which I require following help:
1. what steps should I follow to load the data with respect that whenever the new file comes in the directory of the ftp location start that process chain for data load.(Note : there is no fix time that when the new file will be coming)
2. Every time the new file will be having differnt name , then in that case how we will be fetching the new file which is require for data loading?
Thanks and Regards,
Neha

Hi Neha,
I have not worked on this or made this code.
Recently my onsite did it.
Try to find more gyan on this functiona module...'DX_GET_PHYSICAL_FILENAME'
Code is... write it in infopackge start routine.
DATA: v_filename LIKE dxfile-filename.
Below function module generates the filename with the complete path
based on the app server attached to the Central Instance
The logical mapping Z_INBOUND_EBIZ_PAYMENTS is maintained in the
transaction - "FILE"
CALL FUNCTION 'DX_GET_PHYSICAL_FILENAME'
    EXPORTING
      i_filename             = 'Z_INBOUND_EBIZ_PAYMENTS'
    IMPORTING
      o_filename             = v_filename
    EXCEPTIONS
      not_registered         = 1
      logical_filename_error = 2
      OTHERS                 = 3.
IF sy-subrc = 0.
    p_filename = v_filename.
    p_subrc = 0.
ELSE.
    p_subrc = 4.
ENDIF.
Regards,
San!

Access XML from FTP location

Hi,
I want to access an XML file located on a FTP location. can some body suggest how?..
thank you
chan

Hi Yatan,
The definition of elements aaa to ddd does not seem to have any terminatedBy attribute. It could be issue with this forum editor but ensure that you have terminatedBy set for each element in the schema.
Also ensure that your .CSV file contains appropriate no. of commas irrespective of the null data between them. e.g. *1234, India,,Nee* (note the additional comma).
Regards,
Neeraj sehgal

Notify a user after the message is been delivered to the FTP location by the send port

I have a scenario where I need to send an alert to the user after the file is been delivered to the FTP location.
If for any reason if the send port fails and the file is not delivered then the alert should not be sent. If the first attempt fails there will be a retry and the alert should not be sent on every retry. Only after successful delivery of message.
I have a limitation, Just need to implement using the send ports, No Orchestration or no custom artifacts.
Please advice.
Thanks in Advance.
Thanks Mallesh Bonla BizTalk Architect

Hi Mallesh,
If you don't want to use any custom artifacts like custom pipeline, then you can consider this option.
Create FTP Receive port/Location (Yes Its Receive) and let it poll for any new files to the FTP location where your send port with FTP has configured for.
In the FTP adapter property (of the above Receive location) set "Delete After Download" -No, "Enable
Timestamp Comparison"-Yes.
Create a send port with file for the above Receive port name. Configure this send port to send email/alert.
This configuration would send an email immediately when the FTP folder receives a file. i.e. As per your requirement, whenever file has been delivered
to the FTP folder/server, the above new receive location would trigger for the newly received file. Since you have enabled "Delete After Download" -No, file would not be deleted from the FTP folder and since you have "Enable Timestamp Comparison"
to Yes, adapter would not retrigger another transfer. In this case the new Receive location would only act as receiving trigger message whenever FTP folder receive a file.
This is the only way you can achieve your requirement without any custom artifacts just with the standard out-of-box components.
Otherwise use
la Cour option of promoting AckRequired to the context to enable delivery notification in messaging only way. If you use Orchestration, you know you can do this
with Delivery notification feature.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to create a new folder at the specified FTP location

Hi everyone,
Please guide me for the following query:
How to create a new folder at the specified FTP location if the folder does not exists at that location through ABAP program.
Please guide.
Thanks and Regards
MP

Have a look at the function group SFTP. Use function module ftp_command to create the directory sending the mkdir command.
Use the where-used list to find sample programs.

FTP Location of 9i AS

Hellow
I've been trying to download Oracle 9i Application server, but NO RESUME support is there.
So, anybody has a solution??
Any body has the alternative FTP Location for it??
Regards
Terry
null

Great news, thanks!
PS. Spotlight can be strange, I've disabled it on all but 2 Macs, and it's only left on those 2 so I might help with it's problems here, I'd get EasyFind for actually finding stuff...
http://www.versiontracker.com/dyn/moreinfo/macosx/11706

How to delete Archived files from FTP

HI,
I am looking to delete Archived files from FTP Server, Can anybody have idea about this.
Thanks,
Ram

To be frank, deletion of archived files is really a manual activity and is never in reality done by an interface
so you have two options;
1. log into the archived folder and manually delete archived files
2. run a script in your file adapter - this way everytime the interface is triggered the files will be deleted - but then y do this.. instead just dont archive any files at all

Archiving XI messsages - FTP location

Similar Messages

Maybe you are looking for