Archlinux fails to find installation cd-rom under Qemu

Hi,
I'm having the problem that when I run the Archlinux 2009.08 installation procedure under Qemu virtualization, it fails to detect the cd-rom drive:
Waiting 30 seconds for boot device /dev/archiso ...
ERROR: boot device didn't show up after 30 seconds
Last edited by Max (2009-11-21 12:41:47)

MadTux wrote:Did you already try the suggestions in the qemu wiki article?
Are you hinting at any suggestion in particular?
Do note that I want to run Archlinux under Qemu.
The article is mainly about running Qemu under Archlinux.
I can run other distribution like Ubuntu and Suse fine under Qemu on the same system.
It's only Archlinux that I'm having this problem with.

Similar Messages

  • Archlinux fails to find lvm volumes after installation

    Hi,
    yesterday i installed archlinux on a logical volume, root and boot are both on this volume (/dev/mapper/volg-arch).
    the filesystem is ext3. the setup recognized the volume group and activated all volumes, so the installation was no problem, but when i try to start the system after installation, no volume group can be found.
    lvm2 was enabled during installation using USELVM="yes" in rc.conf and HOOKS="base udev autodetect pata scsi sata keymap lvm2 filesystems" in mkinitcpio.conf.
    i use grub2 to boot the system with the following entry
    menuentry "Arch" {
    linux (volg-arch)/boot/vmlinuz26 root=/dev/mapper/volg-arch
    initrd (volg-arch)/boot/kernel26.img
    it boots, however it cannot find any volume groups and because of that cannot load the root-filesystem.
    my other linux-system works great, which is installed on lvm2 and using grub2, too.
    did i miss a configuration?

    yes, grub2 supports it., which is really great.
    mkinitcpio was run after modifying mkinitcpio.conf automatically by the setup.
    its really odd that it works during the setup but not later.
    :: Running Hook [lvm2]
    Scanning logical volumes...
    Reading all physical volumes. This may take a while...
    No volume groups found.
    Activating logical volumes...
    No volume groups found
    :: Running Hook [filesystems]
    then it fails with errors (because of course no root-device could be found) and the ramfs-shell is started.
    i think lvm-support is enabled,
    because it is scanning for volumes.
    edit:
    just tried to boot with the following entry
    menuentry "ArchInstall" {
    linux (volg-arch-install)/isolinux/vmlinuz root=/dev/mapper/volg-arch
    initrd (volg-arch-install)/isolinux/initrd.img
    this is the volume where i copied the install-cd to (i have no cd-drive and did a hdd-install) and installed the system from.
    IT WORKS! but of course it takes too long to load this setup-initrd for using the system.
    so my initrd, generated by the setup, is wrong :-/
    any hints?
    Last edited by Lazer (2007-10-18 16:08:47)

  • I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    Acrobat X problem updating.
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Is there anybody who know  how to solve it?

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • My acrobat 9 standard fails to find update and any update patch form the adobe ftp site refused to apply saying product not installed or warong patch

    I had been using acrobat 9.5.3 updated through the years form 9.0 that came with my Scansnap.
    However since I refreshed my windows 8.1 with a ssd drive and w8,1 instal from scratch., the acrobat.standard 9.0 just fail to find update
    and I tried downloading the patches from the adobe sites using the  recomended path
    Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) ->
    9.4.0 (Quarterly) -> 9.4.2 (Quarterly) -> 9.4.5 (Quarterly) -> 9.4.6 (Quarterly) -> 9.5.0 (Quarterly) -> 9.5.1 (Quarterly)-> 9.5.2 (Quarterly)->
    9.5.3 (Quarterly)-> 9.5.5 (Quarterly)
    however the update refused to aply even at 9.1.0
    what can I do?

    The cleaner says it should only be used after regular uninstall fails.
    I tried changed the install to full install not skipping lang and doc support. no effect, tried repair no effect
    tried deactivate and uninstall, reboot, ran the cleaner just in case and it found nothing to clean.
    installed with typical settings. reboot, tried to
    opened acrobat, help, update, no upd avail.
    apply AcrobatUpd910_all_me_incr.msp. no luck
    I look at registry, found no entry for adobe under HKLM software, only in HKCU
    Is that a problem for the update?
    Did find HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\9.0\FeatureLockDown
    and HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Adobe Acrobat, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat PDFMaker,
         HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Distiller\9.0,
    However, I ran the Microsoft Mr Fixit, and it found no problem with the installation of acrobat.
    I'm confused what to do

  • Sophos for Linux Failed to replicate from sdds:SOPHOS and Failed to find supplement warehouse

    Every hour the first failure occurs, I.E. failed to replicate. Upon running sudo /opt/sophos-av/bin/savupdate -v5 --debug, I received Failed to find supplement warehouse instead. and the details look like this: Update to include '*' priority 10
    Update to exclude 'sav-*' priority 20
    Update to exclude 'sdf.xml' priority 20
    Update to include 'sav-linux/licence*' priority 30
    Update to include 'sav-linux/manifest.dat' priority 30
    Update to include 'sav-linux/manifest.spec' priority 30
    Update to include 'sav-linux/cidsync.upd' priority 30
    Update to include 'sav-linux/common/*' priority 30
    Update to include 'sav-linux/x86/*' priority 30
    Update to include 'uncdownload/*' priority 20
    Update to exclude 'talpa/*' priority 20
    Update to include 'talpa/talpa-srcpack.tar.gz' priority 30
    Update to include 'talpa/manifest.dat' priority 30
    Update to include 'talpa/cidsync.upd' priority 30
    Update to include 'talpa/copying' priority 30
    Update to include 'talpa/talpa-ubuntu/combined.tgz' priority 30
    Update to include 'talpa/talpa-ubuntu/talpa-binpack-ubuntu-x86_64-3.13.0-61-generic-100ubuntusmpwedjul29112134utc2015.tar.gz' priority 30
    Update to exclude 'sav-linux/x86/32/*' priority 40
    Update to exclude 'uncdownload/32/*' priority 40
    Updating from versions - SAV: 9.10.0, Engine: 3.60.0, Data: 5.15
    SOPHOS source is either SOPHOS, or the warehouse update source address.
    Product line: 1CD8A803-6047-47BC-8CBE-2D4AEB37BEE2 ( we want 5CF594B0-9FED-4212-BA91-A4077CB1D1F3)
    Product line: 5CF594B0-9FED-4212-BA91-A4077CB1D1F3 ( we want 5CF594B0-9FED-4212-BA91-A4077CB1D1F3)
    Product line: D9BB257D-ADE6-47C9-B09E-1ACB33A88EDD ( we want 5CF594B0-9FED-4212-BA91-A4077CB1D1F3)
    Product line: 16847572-641A-4310-94FB-7530471C2A25 ( we want 5CF594B0-9FED-4212-BA91-A4077CB1D1F3)
    Selecting package using recommended policy
    Following SddsConfigTagPolicy
    Warehouse contains 4 products
    Warehouse contains 1 products matching our uuid
    Warehouse contains 1 products matching tag=RECOMMENDED
    SDDS synchronise result=4
    Unable to synchronise files: result=4
    log_entry: [E26245] Cannot locate server for http://dci.sophosupd.com/update/7/74/774de35825b1fcf0a9c28adf75a24333.dat
    log_entry: [I20317] No proxy was used.
    log_entry: [I40394] Successfully downloaded customer file
    log_entry: [E59268] Cannot locate server for http://d1.sophosupd.com/update/catalogue/sdds.linux_free_SAV9100.1.xml
    log_entry: [I23148] No proxy was used.
    log_entry: [I40394] Successfully downloaded customer file
    log_entry: [I96736] Looking for package 5CF594B0-9FED-4212-BA91-A4077CB1D1F3 9.10.0.3600.117
    log_entry: [I45378] Found included product 16847572-641A-4310-94FB-7530471C2A25 3.60.0.5
    log_entry: [I45378] Found included product D9BB257D-ADE6-47C9-B09E-1ACB33A88EDD 3.60.0.5
    log_entry: [I45378] Found included product 1CD8A803-6047-47BC-8CBE-2D4AEB37BEE2 9.10.0.6.2
    log_entry: [I49502] Found supplement TBPS1.19 LATEST 1
    log_entry: [E59264] Cannot locate server for http://d1.sophosupd.com/update/catalogue/sdds.tbp.xml
    log_entry: [I23144] No proxy was used.
    SupplementWarehouseUnavailableException for http://d1.sophosupd.com/update/catalogue/sdds.tbp.xml
    Failed to find supplement warehouse. The update source address is http://d1.sophosupd.com/update/catalogue/sdds.tbp.xml.
    Failed to replicate from all update sources Is this an outage, or is there some issue with the default installation of the Linux free product on Ubuntu 14.04 LTS desktop variant? Are the scheduled updates running under the correct security context is that why they get a different failure? Any help would be appreciated. Thank you.

    Here is the first day of log files including the same failures: lyle@IT-Director:~$ sudo /opt/sophos-av/bin/savlog
    Time                             Category              Event
    Fri 31 Jul 2015 01:30:06 PM CDT: savd.daemon           Sophos Anti-Virus daemon started.
    Fri 31 Jul 2015 01:30:28 PM CDT: talpa_select.compiled NOTE: You are running Sophos Anti-Virus on a kernel for which Sophos does not provide binary kernel modules. Therefore the kernel modules have been locally compiled. Please see KBA14377 for supported platforms and kernels.
    Fri 31 Jul 2015 01:30:33 PM CDT: savd.daemon           On-access scanning enabled using talpa.
    Fri 31 Jul 2015 01:30:33 PM CDT: talpa_select.compiled NOTE: You are running Sophos Anti-Virus on a kernel for which Sophos does not provide binary kernel modules. Therefore the kernel modules have been locally compiled. Please see KBA14377 for supported platforms and kernels.
    Fri 31 Jul 2015 01:39:29 PM CDT: savscan.log           On-demand scan started.
    Fri 31 Jul 2015 01:39:34 PM CDT: savscan.log           On-demand scan finished.
    Fri 31 Jul 2015 01:52:08 PM CDT: savscan.log           On-demand scan started.
    Fri 31 Jul 2015 01:52:13 PM CDT: savscan.log           On-demand scan finished.
    Fri 31 Jul 2015 02:02:48 PM CDT: update.failed         Updating from versions - SAV: 9.10.0, Engine: 3.60.0, Data: 5.15
    Fri 31 Jul 2015 02:02:48 PM CDT: update.failed         Failed to replicate from sddsOPHOS
    Fri 31 Jul 2015 02:02:48 PM CDT: update.failed         Failed to replicate from all update sources
    Fri 31 Jul 2015 02:25:09 PM CDT: update.failed         Updating from versions - SAV: 9.10.0, Engine: 3.60.0, Data: 5.15
    Fri 31 Jul 2015 02:25:09 PM CDT: update.failed         Failed to replicate from sddsOPHOS
    Fri 31 Jul 2015 02:25:09 PM CDT: update.failed         Failed to replicate from all update sources
    Fri 31 Jul 2015 02:40:43 PM CDT: update.failed         Updating from versions - SAV: 9.10.0, Engine: 3.60.0, Data: 5.15
    Fri 31 Jul 2015 02:40:43 PM CDT: update.failed         Failed to find supplement warehouse. The update source address is http://d1.sophosupd.com/update/catalogue/sdds.tbp.xml.

  • Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

    Hi,
    I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
    Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
    the installation log says
    6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
    [6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
    [6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
    [6/5/2007 3:14:05 PM] [2] Beginning processing.
    [6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
    [6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
    [6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
    [6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
    [6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
    [6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [2] Ending processing.
    [6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
    [6/5/2007 3:14:15 PM] [1] 0.  ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
    [6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
    [6/5/2007 3:14:15 PM] [1] Ending processing.
    [6/5/2007 3:14:18 PM] [0] End of Setup
    [6/5/2007 3:14:18 PM] [0] **********************************************
    this I am trying on my test system please help me out in resolving the issue
    thanks in advance,

    Gary,
    Open Registry Editor.
    In Registry Editor, navigate to the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
    Make sure you back up the registry before you do any changes on it.
    Raj

  • Could not find installation information for this machine contact applecare

    I installed Lion on my MacBook, worked great. After 2 months I wanted to clean install the Lion on the same Macbook; went to Apple Support website and there they had instructions on how to clean install Lion.
    I followed the instructions and erased the partition where the OS Lion was installed. Then I tried to re-install it, it kept saying "could not find installation information for this machine contact applecare".
    When I contacted apple care, they asked me to pay 49 dollars in order to get help from them. I already paid the cost for the LION OS and now they want another 49 bucks. This is just insane. I'm not a fan of Apple, Mac or iCrap. But I was thinking to buy a new Mac after selling this one. Now I have no interest in buying any Mac product. Windows 7 is much much better than Lion OS X.
    I have to fix this before I sell it on ebay so Has anyone tried to clean install Lion ?

    I'm with you, OS X Lion has turned a lot of stomachs.
    Here's how to go about what you need to do:
    Get out your 10.6 installer disk, make sure it's clean and polished (bit of rubbing alcohol and a very soft cloth)
    Get 2 blank external drives, connect one and hold c and boot off the 10.6 installer disk, use Disk Utility to format the external drive use
    Erase>Security Option> Zero all data, wait
    under the partition tab
    1 partition, option MBR, format FAT
    Disconnect and reboot.
    Repeat the same procedure for the second drive and format the
    Erase>Security Option> Zero all data, wait
    under the partition tab
    1 partition, option GUID, format OS X Extended Journaled
    Quit and install 10.6 on the external GUID drive.
    Reboot holding the option key, you can boot off the 10.6 external drive, setup, use your same user name as before, update to 10.6.8, grab your files off the OSX Lion partition, transfer a copy to the FAT formatted drive.
    What you do is your choice,
    To continue using the machine under 10.6
    you can erase the entire (select the whole internal drive, not just the OS X Lion Paritition) and use Carbon Copy Cloner to clone 10.6 external to the internal drive,
    To sell the machine with a fresh 10.6 install
    or simply hold c boot off the 10.6 installer disk and install 10.6 on the internal drive and upon reboot, just hard shutdown by pressing the powerbutton before going through setup. The next person who gets the machine will be greeted by the setup again.
    You can use the files on the FAT drive on your Windows PC in some cases.
    Else download the free LibreOffice and it can read quite a few file formats.

  • Create Project Web App Instance - Failed to find Project Site object. Are there any database mounted?

    Hi
    New Installation. Sharepoint 2013, Project Server 2013 and SQL Server 2008 SP1 (another box).
    When I try to create Project Web App Instance, I get 
    Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
     Followed by:
    Failed to provision site PWA with error: Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
    Already tried reinstalling the whole farm to no avail. Farm Admin account is used to do everything within this process.
    Thanks in anticipation.

    Hi
    I got the same error when provisioning the PWA
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-Project Server
    Date:          8/29/2013 11:58:12 AM
    Event ID:      6966
    Task Category: Provisioning
    Level:         Error
    Keywords:     
    User:          abc\administrator
    Computer:      mycomputer
    Description:
    Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
       at Microsoft.Office.Project.Server.Administration.ProvisionFeatureEventHandler.FeatureActivated(SPFeatureReceiverProperties properties)
       at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce)
       at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
       at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
       at Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
    fMarkOnly, SPFeatureDefinitionScope featdefScope)
       at Microsoft.SharePoint.SPFeatureCollection.AddInternal(Guid featureId, Version version, SPFeaturePropertyCollection properties, Boolean force, Boolean fMarkOnly, SPFeatureDefinitionScope featdefScope)
       at Microsoft.SharePoint.SPFeatureCollection.Add(Guid featureId)
       at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProvisioningFeature(SPSite site)
       at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)'.
    Later found that the service application where I was trying to provision the PWA, it was not associated with the web-application.

  • SP3 Upgrade fails to find Weblogic Server 6.1 installed

    Hello,
    I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install it on
    are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem im encounting,
    when i install the service pack, is that the installer fails to find my install of
    weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/). I have tried
    several ways of installing it, and all so far have failed. Anyone else had this problem
    Thanks
    Bobby
    Below is a snippet of the install .
    Choose BEA Home Directory
    1- /bea
    Existing BEA Home: 1
    ===============================================================================
    WebLogic Server 6.1 not found
    WebLogic Server Service Pack 3 Installation failed.
    You do not seem to have WebLogic Server 6.1
    installed for BEAHOME /bea.
    Exiting the Service Pack 3 installer...:

    I had the same problem , the solution I found was to edit the file registry.xml (in
    the same directory as the license file).
    In my case the installation files where copied from another installation and had
    the wrong information in the registry.xml about paths and machine name
    Regards
    Ulf
    "Bobby" <[email protected]> wrote:
    >
    Hello,
    I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install
    it on
    are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem
    im encounting,
    when i install the service pack, is that the installer fails to find my
    install of
    weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/).
    I have tried
    several ways of installing it, and all so far have failed. Anyone else had
    this problem
    Thanks
    Bobby
    Below is a snippet of the install .
    Choose BEA Home Directory
    1- /bea
    Existing BEA Home: 1
    ===============================================================================
    WebLogic Server 6.1 not found
    WebLogic Server Service Pack 3 Installation failed.
    You do not seem to have WebLogic Server 6.1
    installed for BEAHOME /bea.
    Exiting the Service Pack 3 installer...:

  • I get a message of "Could not find installation information for this machine." after trying to Reinstall Mac OS X.

    I would like to repartition the Main HD to two Partitions but could not do so and keep on getting an error message of "Could not unmount disc.." so I tried choosing the "Macintosh HD" partition and tried Partitioning it but the option is not available. So to my frustration I tried clicking on "Erase" to see whether doing so would allow me to finally partition my HD but still can't. And now since I erased my Macintosh HD partition I could no longer boot to Lion.
    Before doing the above steps I downloaded the Lion Recovery Disc Assistant and created an external Recovery HD using an 8GB flash drive. I used this as startup destination by choosing it as boot destination from pressing Option before startup. I tried using Mac OS X  Utilities to Reinstall Mac OS X from the external drive but I only get "Could not find installation information for this machine." message. I also tried booting from the Recovery HD partition on the HD but i also get the same message.
    I have a new iMac that came with OS X Lion 10.7.
    Anybody have idea how to fix this?

    Partitioning on-the-fly may fail if the disk is too fragmented. You cannot run Erase for the internal disk as it contains its system components. The same if trying to run Boot Camp in order to create the Windows partition, it may fail if disk is too fragmented.
    If I correctly understand what you want, then you must boot from an external disk, therefore copy Lion to a 4 GB (or higher) flash drive, run the installer, and then choose the option to partition the disk, this is done after rebooting into the installer from the external drive. You cannot do that if the Lion installer is on the internal drive as it cannot erase or repartition itself.
    If this fails (did you try this?), then perhaps you can try to create a Lion boot flash or DVD by using a non-Apple app called Lion DiskMaker, when ready restart, after chime press option / alt key, then choose to boot from this newly created boot disk or flash drive. This reportedly works OK (tried with an older version of Lion, not recently, was OK). It is better to work with a flash drive, Lion is not optimized to run from optical media.
    WARNING: disregarding the method, you MUST always back up your data when repartitioning or installing / reinstalling.
    Hope this helps to solve you issue. Before any attempt, backup, backup, backup.

  • TS1424 Message saying...Connection Manager invoke failed to find service connection URL why?

    When I go to sign in it iTunes a message comes up stating:  Connection Manager::invoke::Failed to find service connection url.  Does anyone know what this means and how to fix this issue?

    Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

  • I am trying to download the Facebook app to my new iPad and I keep getting an error .  It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url

    the iPad is totally new to me.  I can't seem to do anything with my Apple ID.  As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error.  It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url.  Cancel or Retry.  I have no idea what I'm doing wrong.  Any help would be greatly appreciated.
    I'd also love to know how to get rid of the old owner's name, which was Mike - I'm Ann

    Wow, I found a solution in another thread:
    I had exact same error.....
    Rebooting - Failed
    Logging in to iTunes - Failed
    Logging into itunes Store - Failed
    Logging into iTunes Genius - SUCCESS    I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
    Good luck!
    I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings.....

  • Offline Servicing of OS fails (failed to find properties of file 5)

    Hi,
    I'm unable to get the Offline Update Servicing of the OS to work. In the OfflineServicingMgr.log I Keep getting:
    Failed to get update applicability. Dism.exe command line is below:"C:\Windows\system32\cmd.exe" /q /c ""D:\Microsoft\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\dism.exe" /Image:"D:\ConfigMgr_OfflineImageServicing\I0100042\ImageMountDir" /LogPath:%WINDIR%\Logs\Dism\dism_sccmAMD64.log /English /Get-PackageInfo /Packagepath:"D:\ConfigMgr_OfflineImageServicing\fc1721b9-7ee8-44a6-9842-b7d89596f126\KB2890660.cab">>D:\ConfigMgr_OfflineImageServicing\I0100042\[email protected]"
    after this happened 5 times I get the following:
    Failed to find properties of file 5
    UnMounting Image (Commit Changes = 0) ...
    Completed processing image package I0100042. Status = Failed
    I also checked the dism_sccmAMD64.log but can't find a solution to this Problem, there are to much Errors in there.
    dism_sccmAMD64.log:
    2014-08-27 10:34:49, Info DPX Started DPX phase: Apply Deltas Provided In File
    2014-08-27 10:34:49, Info DPX File could not be expanded, Source=update.mum, Target=(null), status=0x80070002
    2014-08-27 10:34:49, Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab
    2014-08-27 10:34:49, Info DPX Ended DPX phase: Apply Deltas Provided In File
    2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020102
    2014-08-27 10:34:49, Info DPX Ended DPX phase: Resume and Download Job
    2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020217
    2014-08-27 10:34:49, Info CBS Failed to extract file update.mum from cabinet \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Info CBS Failed to initialize internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Error CBS Failed to create internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to open the package at location: "D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the list of packages from the command line. - CPackageManagerCLIHandler::ProcessCmdLine_GetPackageInfo(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed while processing command get-packageinfo. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the PE Provider. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/system32/smi/store/Machine/schema.dat

    Right before, the error you mentioned, I see a couple of file not found message. You might want to check those, still it can be anything from a file that doesn't exist till too little disk space.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • WES 7 OSD standalone (works) vs bootable (fails) - Failed to find suitable device driver for device (help)

    Hi everyone,
    I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
    I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
    The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
    (or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
    And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
    I have tried to:
    - Apply the WIM manually (nothing wrong - boots fine)
    - Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
    - No dice
    - Create a new boot image with the hyper-v drivers in it. No dice
    - Google everything related I can think of.
    I suspect it has something to do with the lines where it says:
    "Failed to find a suitable device driver for device xxx”
    It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
    Please help! What could it be?
    I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
    I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
    SMSTS log key points are (the log is too long to post here):
    401 - Authentication failure on request with anonymous access, retrying with context credentials.                     
    OSDDriverClient               
    5/6/2014 4:03:41 PM     612 (0x0264)
    401 - Authentication failure on request with context credentials, retrying with supplied credentials.                     
    OSDDriverClient               
    5/6/2014 4:03:41 PM     612 (0x0264)
    Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf   
    OSDDriverClient                  
    5/6/2014 4:03:41 PM         
    612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat              
    OSDDriverClient                  
    5/6/2014 4:03:41 PM         
    612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys                   
    OSDDriverClient                  
    5/6/2014 4:03:41 PM         
    612 (0x0264) Download done setting progress bar to 100                  
    OSDDriverClient                  
    5/6/2014 4:03:41 PM                     
    612 (0x0264) VerifyContentHash: Hash algorithm is 32780                 
    OSDDriverClient                  
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type          
    OSDDriverClient               
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type          
    OSDDriverClient               
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type          
    OSDDriverClient               
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"    
    OSDDriverClient                  
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.            
    OSDDriverClient                  
    5/6/2014 4:03:41 PM         
    612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"                   
    OSDDriverClient                  
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
    OSDDriverClient                     
    5/6/2014 4:03:41 PM         
    612 (0x0264) Added list item with key value '1'             
    OSDDriverClient                  
    5/6/2014 4:03:41 PM         
    612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml                   
    OSDDriverClient                     
    5/6/2014 4:03:41 PM         
    612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
    OSDDriverClient                     
    5/6/2014 4:03:41 PM         
    612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.                     
    OSDDriverClient                     
    5/6/2014 4:03:41 PM         
    612 (0x0264) Calling Package manager to add drivers to the offline driver store.     
    OSDDriverClient                  
    5/6/2014 4:03:41 PM    612 (0x0264)
    Command line for extension .exe is "%1" %*               
    OSDDriverClient                  
    5/6/2014 4:03:41 PM                     
    612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"                   
    OSDDriverClient                  
    5/6/2014 4:03:41 PM    612 (0x0264)
    Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"                   
    OSDDriverClient                  
    5/6/2014 4:03:41 PM    612 (0x0264)
    Process completed with exit code 0        
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Dism successfully added drivers to the offline driver store.                
    OSDDriverClient                  
    5/6/2014 4:03:45 PM    612 (0x0264)
    Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.        
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".      
    OSDDriverClient                  
    5/6/2014 4:03:45 PM    612 (0x0264)
    Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA                     
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing              
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA                   
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}       
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed. 
    OSDDriverClient                  
    5/6/2014 4:03:45 PM                     
    612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.                     
    OSDDriverClient               
    5/6/2014 4:03:45 PM    
    612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.                   
    OSDDriverClient                     
    5/6/2014 4:03:45 PM    
    612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}       
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed. 
    OSDDriverClient                  
    5/6/2014 4:03:45 PM                     
    612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.      
    OSDDriverClient                     
    5/6/2014 4:03:45 PM    
    612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}        
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)                    
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed. 
    OSDDriverClient                  
    5/6/2014 4:03:45 PM                     
    612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.                     
    OSDDriverClient               
    5/6/2014 4:03:45 PM    
    612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
    OSDDriverClient               
    5/6/2014 4:03:45 PM  612 (0x0264)
    Exiting with return code 0x00000000      
    OSDDriverClient                  
    5/6/2014 4:03:45 PM         
    612 (0x0264)
    In advance: Sorry...

    Hi,
    0xc0000359 for storvsc.sys
    Looks like Hyper-v Storage Controller driver issue.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • UCM getOrganizationService : Failed to find System Id in input message

    Hi,
    I am having a problem tyring to get a UCM service working.
    This is the SOAP message I am sending:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:cus="http://xmlns.oracle.com/apps/mdm/customer" xmlns:swi="http://www.siebel.com/xml/SwiOrganizationIO">
    <soapenv:Header>
    </soapenv:Header>
    <soapenv:Body>
    <cus:getOrganization_Input>
    <swi:ListOfSwiOrganizationIO Operation="Query" ExternalSystemId="Test" Language="ENU" Locale="English - United States" MessageId="1-A3" EnterpriseServerName="DEVELOPMENT">
    <swi:Account operation="Query">
    <swi:Id>1-3AP3</swi:Id>
    </swi:Account>
    </swi:ListOfSwiOrganizationIO>
    </cus:getOrganization_Input>
    </soapenv:Body>
    </soapenv:Envelope>
    http://server/eai_enu/start.swe?SWEExtSource=SecureWebService&amp;SWEExtCmd=Execute&amp;WSSOAP=1&amp;UserName=user&amp;Password=pass
    (where the ampersand's are encoded)
    In the response and logs on the server I get back a:
    Failed to find System Id in input message(SBL-IAI-00436)
    I have added the External System "Test" under tab "Administration - Universal Customer Hub - System Registration"
    I am running Siebel 8.1.1.3 on Win2k3R2
    Is it trying to resolve the external system Id somehow or is there something wrong with the xml?
    I have turned up the log level to 4 on most components but can't find anything useful to help me diagnose this problem.
    Thanks

    hello everyone,
    I still have my issue and can't connect my 3G interface.
    I can complete my issue with this log 
    *Aug 12 08:35:34.023: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
    *Aug 12 08:35:38.019: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
    Thank's for your help.

Maybe you are looking for

  • Windows 7 Boot Camp Color Scheme Issues

    Hi. I just recently installed Windows 7 Ultimate on my Boot Camp, and the first thing I noticed was the poor resolution that was stuck to 1600x1200 pixels. The Display Adapter used is listed as "Generic Non-PnP Monitor on Standard VGA Graphics Adapte

  • Laptop blocks another computer from connecting router.

    HiI'll appreciate your help with my problem very much: in my house there is one computer that's connected to the home router with cable, and other devices that are connected via WiFi, including my  laptop (ThinkPad E540).  Whenever I connect to the r

  • 8i on Linux

    I would like to develop application using forms(C/S architecture) on Linux platform. Please let me know the installation procedures and requirements for Linux and Oracle Database and forms versions etc.

  • Old Mail vs. New Mail

    Well, I got my email from Apple this afternoon telling me that in May I will no longer have the option of not converting to the new MobileMe Mail app. Would like to hear from some of you who have converted whether or not the new app has settled down

  • Mail upgrade crashes in Mountain Lion

    I cannot get Mail to upgrade after ML install? Suggestions?