Archlinux in Twinhead e10

Hi everyone.
I got a Twinhead e10 laptop recently and decided to install Archlinux (the pre-installed Neoshine distro was too slow; had to replace it).
I installed Archlinux previously on my PC and on another laptop without major problems, but I ran into display issues when installing on the Twinhead e10. The laptop has a full-screen display of 1024x600, but I can't get the display to work normally using the installation steps from the Beginner's Guide. After installing LXDE, the desktop size was bigger (like 1024x768, 1024x800, etc) than the screen's display size, which causes parts of the desktop to be offscreen. This only happens in graphic mode (normal terminal mode seems okay).
What should I do? I tried searching the forum relating to Twinhead e10, but found none.

You should mention what graphics card it has, because the official webpage does not speak of this.
Note you might have to specify your DPI in your .Xsession file, that's at least what I had to do to get the correct font size in LXDE.

Similar Messages

  • Printing glitches on my archlinux server

    Hello archers,
    i've been having some problems with my archlinux server. Connected to the server is a HP Laserjet CM1312 printer via USB, server is shared via CUPS and Samba.
    I've followed the Archwiki guide for CUPS and Samba for installing the printer.
    The specific problem i'm having is printing from a Windows machine. After printing has begun, printing is first fine, but then it'll sometimes start to print gibberish like this (with PCL5): http://ompldr.org/vNzd2aw
    I've yet to experience problems printing from my linux machine. I've tried shifting in between drivers on the Windows machine (PCL5, PCL6, Postscript)
    Switching to a Postscript driver on the Windows machine prints fine, but after a while produces errors like this: http://ompldr.org/vNzd2dw
    CUPS error log contains:
    E [30/Jan/2011:21:03:05 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [30/Jan/2011:21:04:00 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    D [30/Jan/2011:21:06:20 +0100] [Job 51] The following messages were recorded from 21:00:03 to 21:06:20
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Adding start banner page "none".
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Adding end banner page "none".
    D [30/Jan/2011:21:06:20 +0100] [Job 51] File of type application/vnd.cups-raw queued by "nobody".
    D [30/Jan/2011:21:06:20 +0100] [Job 51] hold_until=0
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Queued on "HP_Color_LaserJet_CM1312_MFP_USB_00CNF8B3Q1SC_HPLIP" by "nobody".
    D [30/Jan/2011:21:06:20 +0100] [Job 51] job-sheets=none,none
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[0]="HP_Color_LaserJet_CM1312_MFP_USB_00CNF8B3Q1SC_HPLIP"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[1]="51"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[2]="nobody"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[3]="smbprn.00000039 Remote Downlevel Document"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[4]="1"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[5]="job-originating-host-name=::ffff:192.168.1.133 job-uuid=urn:uuid:6345dae1-010f-3774-55f6-7cb213dff752 time-at-creation=1296417603 time-at-processing=1296417976 AP_D_InputSlot="
    D [30/Jan/2011:21:06:20 +0100] [Job 51] argv[6]="/var/spool/cups/d00051-001"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[8]="HOME=/var/spool/cups/tmp"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[10]="[email protected]"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[11]="SOFTWARE=CUPS/1.4.6"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[13]="USER=root"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[16]="IPP_PORT=631"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[17]="CHARSET=utf-8"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[18]="LANG=en_US.UTF-8"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[19]="PPD=/etc/cups/ppd/HP_Color_LaserJet_CM1312_MFP_USB_00CNF8B3Q1SC_HPLIP.ppd"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[20]="RIP_MAX_CACHE=8m"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[21]="CONTENT_TYPE=application/vnd.cups-raw"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[22]="DEVICE_URI=hp:/usb/HP_Color_LaserJet_CM1312_MFP?serial=00CNF8B3Q1SC"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[23]="PRINTER_INFO=HP Color LaserJet CM1312 MFP"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[24]="PRINTER_LOCATION=Local Printer"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[25]="PRINTER=HP_Color_LaserJet_CM1312_MFP_USB_00CNF8B3Q1SC_HPLIP"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] envp[26]="CUPS_FILETYPE=document"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Started backend /usr/lib/cups/backend/hp (PID 22315)
    D [30/Jan/2011:21:06:20 +0100] [Job 51] PAGE: 1 1
    D [30/Jan/2011:21:06:20 +0100] [Job 51] STATE: +connecting-to-device
    D [30/Jan/2011:21:06:20 +0100] [Job 51] STATE: -connecting-to-device
    D [30/Jan/2011:21:06:20 +0100] [Job 51] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
    D [30/Jan/2011:21:06:20 +0100] [Job 51] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Backend returned status 4 (stop printer)
    D [30/Jan/2011:21:06:20 +0100] [Job 51] Printer stopped due to backend errors; please consult the error_log file for details.
    D [30/Jan/2011:21:06:20 +0100] [Job 51] End of messages
    D [30/Jan/2011:21:06:20 +0100] [Job 51] printer-state=5(stopped)
    D [30/Jan/2011:21:06:20 +0100] [Job 51] printer-state-message="/usr/lib/cups/backend/hp failed"
    D [30/Jan/2011:21:06:20 +0100] [Job 51] printer-state-reasons=paused
    E [30/Jan/2011:21:11:22 +0100] [Job 51] Stopping unresponsive job!
    Hope you can help me out.

    timm wrote:it now requires a microsoft sql server.
    You may try using Sybase ASE; for long time (until 6.0), MS SQL Server was just Sybase with MS branding and even today differences are not so big (depending, of course, on specific application's needs). I have never tried such a setup, but connecting to MSSQL with Sybase client libraries works OK, maybe you'd have luck in opposite direction.
    There is a document on migrating apps from MSSQL to ASE; I know this is not the case, but there are some valuable information about differences between those RDBMSs that may help you to decide whether there are chances to succeed or not.

  • [SOLVE] Dual Boot Windows and ArchLinux with Syslinux

    Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
    Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
    mount: wrong fs type, bad option, bad superblock on /dev/sda3,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so.
    Tried dmesg | tail and got
    [ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
    [ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
    [ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
    [ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
    [ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
    [ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    This is when i run sudo lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 149.1G 0 disk
    |-sda1 8:1 0 9.8G 0 part /boot
    |-sda2 8:2 0 1K 0 part
    |-sda3 8:3 0 53.6G 0 part
    `-sda5 8:5 0 85.7G 0 part /
    sr0 11:0 1 1024M 0 rom
    My syslinux is
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sda5 rw
    INITRD ../initramfs-linux.img
    LABEL windows
    MENU LABEL Windows
    COM32 chain.c32
    APPEND hd0 3
    NOTE: chain is in the same directory with syslinux
    I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
    Thanks in advance
    Last edited by jag-ster (2014-11-27 02:12:12)

    Here is the partition table:
    /dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
    /dev/sda2 "name" of the extended partition
    /dev/sda3 primary Windows partition (assuming NTFS)
    /dev/sda5 logical Linux root partition (assuming ext4)
    /dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
    Windows problem:
    The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
    Mounting problem:
    You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
    sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
    EDIT:
    Try it this way:
    - Backup all your data
    - Delete every partition
    - Start Windows installation
    - Make only one partition (c:/ for Windows)
    - Let Windows make another partition
    - Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
    - Start Arch installation
    - Get to partitioning
        =Partitioning=
        - /dev/sda4 extended (take the rest of the drive)
        - /dev/sda5 logical /boot 512MiB
        - /dev/sda6 logical /          20GiB
        - /dev/sda7 logical /home (the rest)
    Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
    Last edited by bstaletic (2014-02-28 23:25:33)

  • Archlinux. On QEMU. On your USB. On Windows

    - GOAL
        Running ArchLinux 2009.02 on an USB Drive in Windows. Slow? Perhaps. Personally, I think it is actually pretty fast. Though
        I must admit that I don't use funky things like X-windows (KDE, Gnome or something else), it was still pretty fast for a
        complete OS running from an USB stick within(!) another OS.
        So why would you want to do this? It's quite simple, actually. For me, the problem was that I always had to use Windows (XP)
        at my work and wouldn't be able to boot into Arch there using a LiveCD or USB, thus being unable to use all my applications.
        Perhaps you ARE able to boot into Linux at your work, but still, it can become quite frustrating to have to boot into another
        Operating System all the time. With this, you don't have to do that anymore, you can run all your Linux applications IN
        Windows!
    - REQUIREMENTS
        - Download QEMU 0.9.0 for Windows
        - Download ArchLinux 2009.02 (later versions will probably work, but I used this version)
        - An empty CD
        - An USB drive of at least 4GiB
    - GETTING ARCH
        The first thing you should do once you have downloaded ArchLinux (a task that could take a while, depending largely on the
        speed of your internet connection,) is to burn it to a CD. Perhaps it's different with you, but for me, QEMU wasn't able to
        use the CD-image of ArchLinux properly without it being burned to a CD and being in the real CD-drive. Yes, I know this sucks,
        because this means the installation of ArchLinux on your USB drive is going to take even MORE time, but I'm afraid it won't
        work otherwise. (It didn't work with me, at least, perhaps it is different if you are using a different version of Arch, feel
        free to contact me if this is the case.)
    - SETTING UP QEMU
        Once you have downloaded and unzipped QEMU, you have to create a disk image using qemu-img.exe. Fire up a terminal, and run
        "qemu-img.exe create harddisk.img 4000M". This will probably take some time. (Assuming you are doing this on your USB drive,
        if you're not, you still have to copy the file to your USB drive someday, so don't think you've bypassed the test of patience!)
        When it's done, you will have a nice raw image file of 4000 Megabytes without any data in your folder, we are going to need
        this later.
        Now, to be able to boot the ArchLinux CD in QEMU, we have to modify the qemu-win.bat file a bit. Open the file, remove all
        lines, and then write this: "qemu.exe -L . -m 512 -boot d -cdrom /dev/cdrom -hda harddisk.img" Now if you run this batch file,
        it will start QEMU, allocate a maximum of 512MB RAM to the application (use less if you don't have that many, but I recommend
        using as much as possible, since you don't want it to run TOO slow), boot from CDROM (-boot d) and use the /dev/cdrom to
        locate the CDROM image, which should be your (first) CD/DVD-player. The -hda harddisk.img means it will use the file
        harddisk.img as a hard disk drive (duh) which we are going to use to install Arch on. To go on, put the ArchLinux CD in your
            CD/DVD-player, and run the batch file.
    - INSTALLING ARCH
        Installing ArchLinux is pretty straightforward, all you have to do is follow the instructions on the screen. There are a few
        points you should keep in mind when installing ArchLinux on an USB drive, though.
        - Don't create too many partitions! When using the 'auto-partitioner', Arch wants you to create seperate partitions for the
        / and the /home folder, I would not recommend doing this if you haven't created a harddisk image of at least 8000M. Because,
        quite simply, otherwise you have to distribute the space (just 4000M) between / and /home, and it can be quite difficult to
        allocate the right amount of space. Believe me, it IS a problem if you run out of space someday. You can't just create a
        bigger harddisk.img file. (Well, technically you can, but that would be a little bit.. difficult for most people.)
        - Don't select too many packages. Assuming you know what you're doing, try to deselect as much as possible (without screwing
        up the whole thing, of course) for a very simple reason, you don't have that much space on a simple USB drive.
        - Of course, you don't have to care at all about the above pointers if you have a very large USB drive. Very large here
        meaning anything larger than 16GB, so yes, that IS pretty large in my opinion.
    - SETTING UP QEMU, AGAIN
        So you've installed Arch on your harddisk image, huh? Well done! In any case, we can't use the qemu-win.bat file anymore,
        since we don't want to boot using the CD/DVD-player again. I recommend creating a new batch file in the QEMU folder,
        (call it 'arch-hd.bat', or something like that,) and put the following line into it: "qemu.exe -L . -m 512 -boot c -hda
        harddisk.img", the only thing that is changed is that we don't use the CD/DVD-player anymore, and that we changed the
        it to -boot c which means it will boot from the harddisk image. (Actually isn't so difficult now, is it?)
    - FINAL REMARKS
        Now you're ready to go! You've installed ArchLinux on a Virtual Machine on your USB drive, so now the fun can start! One more
        thing that I consider VERY important to know is how to mount your physical hard disk in Arch (in QEMU). Knowing this can make
        it extremety-much easier to install things on Arch, since you can then simply 'download' the packages from your physical
        hard drive.
        To use your physical hard drive in QEMU, add "-hdb \\.\PhysicalDrive0" to the batch-file (arch-hd.bat), this line will assign
        your first physical hard drive to /dev/hdb (or /dev/sdb) in Arch. Remember that you still have to mount it! (Someting that can
        be done    by writing "mount -t ntfs /dev/hdb1 /mnt/" in the terminal. Assuming your first hard drive uses the NTFS-format, and
        the main partitions is /dev/hdb1, this should put all files and filders in /mnt/. It is possible that your partition is called
        /dev/sdb1, in that case simply replace hdb1 with sdb1.)
        Please keep in mind that there are many, many more parameters you can use in QEMU, so reading the documentation will probably
        be a very good thing. You never know, you MIGHT even learn something!
    - FREQUENTLY ASKED QUESTIONS
        Q. When configuring the system in the ArchLinux installer, it just stopped doing anything when it was saving the configuration
        files! Did it somehow crash?
        A. No, this is normal. For some reason (called 'writing speed'), this just takes time. Much time. Lots of time. This is the real
        test of patience.
        Q. How do I get support for sound/video card/networking/etc. in QEMU?
        A. Read the documentation!
        Q. Help! QEMU crashed when I tried to run the .bat file!
        A. Check whether you are using the exact same .bat file as given in the instructions. If it still doesn't work, contact me and
        I will try to solve your problem if you provide me with enough information about it. (So sending me a message containing
        something like "Help! QEMU doesn't work on my PC!" will probably not get you much of a useful response.)

    thank you, quite useful. btw i had to use qemu 0.9.0 for installation - somehow i was unable to make 1.5.50 boot (from neither iso nor physical cdrom). but then i had to switch back to the newer version because i was getting a lot of libata2 exception messages on console. also, i had to update UUID for some reason in grub.cfg. performancewise it's not very fast but it fits my needs. i am using the following command to start my qemu archbox: qemu-system-i386.exe -boot c -hda harddisk.img -net nic,model=virtio -net user -redir tcp:5555::22 and then i can connect using putty on my local port 5555. the good thing about this is that you really don't need admin rights.

  • [SOLVED] Archlinux crashed - how to find out why?

    Hi,
    just few minutes ago my archlinux crashed.
    It freezed for something like 5 seconds and then restarted. It's first time in my life I see linux crashes so badly.
    Are there any logs I could check to find the reason why my machine crashed? It's a fresh install because I repartitioned my HDD and installed arch two days ago. Hardware wasn't changed and previous installation was running fine for more than a year. OK, there were some minor issues but it never crashed this way.
    What is different in my current installation is I'm using nouveau driver for my graphics card instead of proprietary nvidia driver.
    Running applications I remember:
    -firefox
    -thunderbird
    -rhythmbox
    -rtorrent (NEW thing, I wans't using it before. But I also doubt it had any influence on what happend)
    Linux t61 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64 GNU/Linux
    It seems like there was nothing logged for last boot
    journalctl -b -1
    gives
    -- Logs begin at sob 2014-11-15 21:26:17 CET, end at nie 2014-11-16 21:24:18 CET. --
    lis 16 15:55:05 t61 systemd-journal[126]: Runtime journal is using 8.0M (max allowed 149.8M, trying to leave 224.7M free of 1.4G available → current limit 149.8M).
    lis 16 15:55:06 t61 systemd-journal[126]: Permanent journal is using 24.0M (max allowed 3.9G, trying to leave 4.0G free of 25.3G available → current limit 3.9G).
    lis 16 15:55:07 t61 systemd-journal[126]: Time spent on flushing to /var is 1.064229s for 2 entries.
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys cpuset
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys cpu
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys cpuacct
    lis 16 15:55:07 t61 kernel: Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
    lis 16 15:55:07 t61 kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ea5c6a7b-1f73-4527-b99c-29920084bd42 rw quiet
    lis 16 15:55:07 t61 kernel: e820: BIOS-provided physical RAM map:
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000beeaffff] usable
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000beeb0000-0x00000000beecbfff] ACPI data
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000beecc000-0x00000000beefffff] ACPI NVS
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000bef00000-0x00000000beffffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    lis 16 15:55:07 t61 kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    lis 16 15:55:07 t61 kernel: NX (Execute Disable) protection: active
    lis 16 15:55:07 t61 kernel: SMBIOS 2.4 present.
    lis 16 15:55:07 t61 kernel: DMI: LENOVO 7664R6G/7664R6G, BIOS 7LETD0WW (2.30 ) 02/27/2012
    lis 16 15:55:07 t61 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    lis 16 15:55:07 t61 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    lis 16 15:55:07 t61 kernel: AGP: No AGP bridge found
    lis 16 15:55:07 t61 kernel: e820: last_pfn = 0xbeeb0 max_arch_pfn = 0x400000000
    lis 16 15:55:07 t61 kernel: MTRR default type: uncachable
    lis 16 15:55:07 t61 kernel: MTRR fixed ranges enabled:
    lis 16 15:55:07 t61 kernel: 00000-9FFFF write-back
    lis 16 15:55:07 t61 kernel: A0000-BFFFF uncachable
    lis 16 15:55:07 t61 kernel: C0000-CFFFF write-protect
    lis 16 15:55:07 t61 kernel: D0000-DFFFF uncachable
    lis 16 15:55:07 t61 kernel: E0000-FFFFF write-protect
    lis 16 15:55:07 t61 kernel: MTRR variable ranges enabled:
    lis 16 15:55:07 t61 kernel: 0 base 0BF000000 mask FFF000000 uncachable
    lis 16 15:55:07 t61 kernel: 1 base 000000000 mask F80000000 write-back
    lis 16 15:55:07 t61 kernel: 2 base 080000000 mask FC0000000 write-back
    lis 16 15:55:07 t61 kernel: 3 base 0BEF00000 mask FFFF00000 uncachable
    lis 16 15:55:07 t61 kernel: 4 disabled
    lis 16 15:55:07 t61 kernel: 5 disabled
    lis 16 15:55:07 t61 kernel: 6 disabled
    lis 16 15:55:07 t61 kernel: 7 disabled
    lis 16 15:55:07 t61 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    lis 16 15:55:07 t61 kernel: found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8800000f68f0]
    lis 16 15:55:07 t61 kernel: Scanning 1 areas for low memory corruption
    lis 16 15:55:07 t61 kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    lis 16 15:55:07 t61 kernel: [mem 0x00000000-0x000fffff] page 4k
    lis 16 15:55:07 t61 kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    lis 16 15:55:07 t61 kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    lis 16 15:55:07 t61 kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0xbec00000-0xbedfffff]
    lis 16 15:55:07 t61 kernel: [mem 0xbec00000-0xbedfffff] page 2M
    lis 16 15:55:07 t61 kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0xbc000000-0xbebfffff]
    lis 16 15:55:07 t61 kernel: [mem 0xbc000000-0xbebfffff] page 2M
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0x80000000-0xbbffffff]
    lis 16 15:55:07 t61 kernel: [mem 0x80000000-0xbbffffff] page 2M
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0x00100000-0x7fffffff]
    lis 16 15:55:07 t61 kernel: [mem 0x00100000-0x001fffff] page 4k
    lis 16 15:55:07 t61 kernel: [mem 0x00200000-0x7fffffff] page 2M
    lis 16 15:55:07 t61 kernel: init_memory_mapping: [mem 0xbee00000-0xbeeaffff]
    lis 16 15:55:07 t61 kernel: [mem 0xbee00000-0xbeeaffff] page 4k
    lis 16 15:55:07 t61 kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    lis 16 15:55:07 t61 kernel: RAMDISK: [mem 0x3798a000-0x37cbcfff]
    lis 16 15:55:07 t61 kernel: ACPI: Early table checksum verification disabled
    lis 16 15:55:07 t61 kernel: ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO)
    lis 16 15:55:07 t61 kernel: ACPI: XSDT 0x00000000BEEBB614 000094 (v01 LENOVO TP-7L 00002300 LTP 00000000)
    lis 16 15:55:07 t61 kernel: ACPI: FACP 0x00000000BEEBB700 0000F4 (v03 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140724/tbfadt-618)
    lis 16 15:55:07 t61 kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20140724/tbfadt-618)
    lis 16 15:55:07 t61 kernel: ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20140724/tbfadt-649)
    lis 16 15:55:07 t61 kernel: ACPI: DSDT 0x00000000BEEBBB1D 01003C (v01 LENOVO TP-7L 00002300 MSFT 03000000)
    lis 16 15:55:07 t61 kernel: ACPI: FACS 0x00000000BEEE4000 000040
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0x00000000BEEBB8B4 000269 (v01 LENOVO TP-7L 00002300 MSFT 03000000)
    lis 16 15:55:07 t61 kernel: ACPI: ECDT 0x00000000BEECBB59 000052 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: TCPA 0x00000000BEECBBAB 000032 (v02 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: APIC 0x00000000BEECBBDD 000068 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: MCFG 0x00000000BEECBC45 00003C (v01 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: HPET 0x00000000BEECBC81 000038 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: SLIC 0x00000000BEECBDF0 000176 (v01 LENOVO TP-7L 00002300 LTP 00000000)
    lis 16 15:55:07 t61 kernel: ACPI: BOOT 0x00000000BEECBF66 000028 (v01 LENOVO TP-7L 00002300 LTP 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: ASF! 0x00000000BEECBF8E 000072 (v16 LENOVO TP-7L 00002300 PTL 00000001)
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0x00000000BEEE26D9 00025F (v01 LENOVO TP-7L 00002300 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0x00000000BEEE2938 0000A6 (v01 LENOVO TP-7L 00002300 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0x00000000BEEE29DE 0004F7 (v01 LENOVO TP-7L 00002300 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0x00000000BEEE2ED5 0001D8 (v01 LENOVO TP-7L 00002300 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: DMI detected: Lenovo ThinkPad T61
    lis 16 15:55:07 t61 kernel: ACPI: Local APIC address 0xfee00000
    lis 16 15:55:07 t61 kernel: No NUMA configuration found
    lis 16 15:55:07 t61 kernel: Faking a node at [mem 0x0000000000000000-0x00000000beeaffff]
    lis 16 15:55:07 t61 kernel: Initmem setup node 0 [mem 0x00000000-0xbeeaffff]
    lis 16 15:55:07 t61 kernel: NODE_DATA [mem 0xbeeac000-0xbeeaffff]
    lis 16 15:55:07 t61 kernel: [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bb400000-ffff8800be3fffff] on node 0
    lis 16 15:55:07 t61 kernel: Zone ranges:
    lis 16 15:55:07 t61 kernel: DMA [mem 0x00001000-0x00ffffff]
    lis 16 15:55:07 t61 kernel: DMA32 [mem 0x01000000-0xffffffff]
    lis 16 15:55:07 t61 kernel: Normal empty
    lis 16 15:55:07 t61 kernel: Movable zone start for each node
    lis 16 15:55:07 t61 kernel: Early memory node ranges
    lis 16 15:55:07 t61 kernel: node 0: [mem 0x00001000-0x0009cfff]
    lis 16 15:55:07 t61 kernel: node 0: [mem 0x00100000-0xbeeaffff]
    lis 16 15:55:07 t61 kernel: On node 0 totalpages: 781900
    lis 16 15:55:07 t61 kernel: DMA zone: 64 pages used for memmap
    lis 16 15:55:07 t61 kernel: DMA zone: 21 pages reserved
    lis 16 15:55:07 t61 kernel: DMA zone: 3996 pages, LIFO batch:0
    lis 16 15:55:07 t61 kernel: DMA32 zone: 12155 pages used for memmap
    lis 16 15:55:07 t61 kernel: DMA32 zone: 777904 pages, LIFO batch:31
    lis 16 15:55:07 t61 kernel: ACPI: PM-Timer IO Port: 0x1008
    lis 16 15:55:07 t61 kernel: ACPI: Local APIC address 0xfee00000
    lis 16 15:55:07 t61 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    lis 16 15:55:07 t61 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    lis 16 15:55:07 t61 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    lis 16 15:55:07 t61 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    lis 16 15:55:07 t61 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    lis 16 15:55:07 t61 kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    lis 16 15:55:07 t61 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    lis 16 15:55:07 t61 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    lis 16 15:55:07 t61 kernel: ACPI: IRQ0 used by override.
    lis 16 15:55:07 t61 kernel: ACPI: IRQ9 used by override.
    lis 16 15:55:07 t61 kernel: Using ACPI (MADT) for SMP configuration information
    lis 16 15:55:07 t61 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    lis 16 15:55:07 t61 kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    lis 16 15:55:07 t61 kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    lis 16 15:55:07 t61 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    lis 16 15:55:07 t61 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    lis 16 15:55:07 t61 kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    lis 16 15:55:07 t61 kernel: e820: [mem 0xbf000000-0xefffffff] available for PCI devices
    lis 16 15:55:07 t61 kernel: Booting paravirtualized kernel on bare hardware
    lis 16 15:55:07 t61 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    lis 16 15:55:07 t61 kernel: PERCPU: Embedded 29 pages/cpu @ffff8800bea00000 s86848 r8192 d23744 u1048576
    lis 16 15:55:07 t61 kernel: pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
    lis 16 15:55:07 t61 kernel: pcpu-alloc: [0] 0 1
    lis 16 15:55:07 t61 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 769660
    lis 16 15:55:07 t61 kernel: Policy zone: DMA32
    lis 16 15:55:07 t61 kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ea5c6a7b-1f73-4527-b99c-29920084bd42 rw quiet
    lis 16 15:55:07 t61 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    lis 16 15:55:07 t61 kernel: AGP: Checking aperture...
    lis 16 15:55:07 t61 kernel: AGP: No AGP bridge found
    lis 16 15:55:07 t61 kernel: Calgary: detecting Calgary via BIOS EBDA area
    lis 16 15:55:07 t61 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    lis 16 15:55:07 t61 kernel: Memory: 3063108K/3127600K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 64492K reserved)
    lis 16 15:55:07 t61 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    lis 16 15:55:07 t61 kernel: Preemptible hierarchical RCU implementation.
    lis 16 15:55:07 t61 kernel: RCU dyntick-idle grace-period acceleration is enabled.
    lis 16 15:55:07 t61 kernel: Dump stacks of tasks blocking RCU-preempt GP.
    lis 16 15:55:07 t61 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    lis 16 15:55:07 t61 kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    lis 16 15:55:07 t61 kernel: NR_IRQS:8448 nr_irqs:440 0
    lis 16 15:55:07 t61 kernel: Console: colour dummy device 80x25
    lis 16 15:55:07 t61 kernel: console [tty0] enabled
    lis 16 15:55:07 t61 kernel: allocated 12582912 bytes of page_cgroup
    lis 16 15:55:07 t61 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    lis 16 15:55:07 t61 kernel: hpet clockevent registered
    lis 16 15:55:07 t61 kernel: tsc: Fast TSC calibration using PIT
    lis 16 15:55:07 t61 kernel: tsc: Detected 2094.738 MHz processor
    lis 16 15:55:07 t61 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.03 BogoMIPS (lpj=6982460)
    lis 16 15:55:07 t61 kernel: pid_max: default: 32768 minimum: 301
    lis 16 15:55:07 t61 kernel: ACPI: Core revision 20140724
    lis 16 15:55:07 t61 kernel: ACPI: All ACPI Tables successfully acquired
    lis 16 15:55:07 t61 kernel: Security Framework initialized
    lis 16 15:55:07 t61 kernel: Yama: becoming mindful.
    lis 16 15:55:07 t61 kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    lis 16 15:55:07 t61 kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    lis 16 15:55:07 t61 kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    lis 16 15:55:07 t61 kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys memory
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys devices
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys freezer
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys net_cls
    lis 16 15:55:07 t61 kernel: Initializing cgroup subsys blkio
    lis 16 15:55:07 t61 kernel: CPU: Physical Processor ID: 0
    lis 16 15:55:07 t61 kernel: CPU: Processor Core ID: 0
    lis 16 15:55:07 t61 kernel: mce: CPU supports 6 MCE banks
    lis 16 15:55:07 t61 kernel: CPU0: Thermal monitoring enabled (TM2)
    lis 16 15:55:07 t61 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    lis 16 15:55:07 t61 kernel: Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    lis 16 15:55:07 t61 kernel: ftrace: allocating 20675 entries in 81 pages
    lis 16 15:55:07 t61 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    lis 16 15:55:07 t61 kernel: smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz (fam: 06, model: 17, stepping: 06)
    lis 16 15:55:07 t61 kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    lis 16 15:55:07 t61 kernel: ... version: 2
    lis 16 15:55:07 t61 kernel: ... bit width: 40
    lis 16 15:55:07 t61 kernel: ... generic registers: 2
    lis 16 15:55:07 t61 kernel: ... value mask: 000000ffffffffff
    lis 16 15:55:07 t61 kernel: ... max period: 000000007fffffff
    lis 16 15:55:07 t61 kernel: ... fixed-purpose events: 3
    lis 16 15:55:07 t61 kernel: ... event mask: 0000000700000003
    lis 16 15:55:07 t61 kernel: x86: Booting SMP configuration:
    lis 16 15:55:07 t61 kernel: .... node #0, CPUs: #1
    lis 16 15:55:07 t61 kernel: TSC synchronization [CPU#0 -> CPU#1]:
    lis 16 15:55:07 t61 kernel: Measured 383775 cycles TSC warp between CPUs, turning off TSC clock.
    lis 16 15:55:07 t61 kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
    lis 16 15:55:07 t61 kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    lis 16 15:55:07 t61 kernel: x86: Booted up 1 node, 2 CPUs
    lis 16 15:55:07 t61 kernel: smpboot: Total of 2 processors activated (8382.07 BogoMIPS)
    lis 16 15:55:07 t61 kernel: devtmpfs: initialized
    lis 16 15:55:07 t61 kernel: PM: Registering ACPI NVS region [mem 0xbeecc000-0xbeefffff] (212992 bytes)
    lis 16 15:55:07 t61 kernel: pinctrl core: initialized pinctrl subsystem
    lis 16 15:55:07 t61 kernel: RTC time: 14:54:57, date: 11/16/14
    lis 16 15:55:07 t61 kernel: NET: Registered protocol family 16
    lis 16 15:55:07 t61 kernel: cpuidle: using governor ladder
    lis 16 15:55:07 t61 kernel: cpuidle: using governor menu
    lis 16 15:55:07 t61 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    lis 16 15:55:07 t61 kernel: ACPI: bus type PCI registered
    lis 16 15:55:07 t61 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    lis 16 15:55:07 t61 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    lis 16 15:55:07 t61 kernel: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    lis 16 15:55:07 t61 kernel: PCI: Using configuration type 1 for base access
    lis 16 15:55:07 t61 kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    lis 16 15:55:07 t61 kernel: mtrr: probably your BIOS does not setup all CPUs.
    lis 16 15:55:07 t61 kernel: mtrr: corrected configuration.
    lis 16 15:55:07 t61 kernel: ACPI: Added _OSI(Module Device)
    lis 16 15:55:07 t61 kernel: ACPI: Added _OSI(Processor Device)
    lis 16 15:55:07 t61 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    lis 16 15:55:07 t61 kernel: ACPI: Added _OSI(Processor Aggregator Device)
    lis 16 15:55:07 t61 kernel: ACPI: Added _OSI(Linux)
    lis 16 15:55:07 t61 kernel: ACPI : EC: EC description table is found, configuring boot EC
    lis 16 15:55:07 t61 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
    lis 16 15:55:07 t61 kernel: ACPI: Dynamic OEM Table Load:
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0xFFFF8800BE40F800 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: Dynamic OEM Table Load:
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0xFFFF8800BA3FC000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: Dynamic OEM Table Load:
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0xFFFF8800BA2BE800 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: Dynamic OEM Table Load:
    lis 16 15:55:07 t61 kernel: ACPI: SSDT 0xFFFF8800BA2BFC00 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    lis 16 15:55:07 t61 kernel: ACPI: Interpreter enabled
    lis 16 15:55:07 t61 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    lis 16 15:55:07 t61 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    lis 16 15:55:07 t61 kernel: ACPI: (supports S0 S3 S4 S5)
    lis 16 15:55:07 t61 kernel: ACPI: Using IOAPIC for interrupt routing
    lis 16 15:55:07 t61 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    lis 16 15:55:07 t61 kernel: ACPI: Power Resource [PUBS] (on)
    lis 16 15:55:07 t61 kernel: acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
    lis 16 15:55:07 t61 kernel: acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
    lis 16 15:55:07 t61 kernel: acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    lis 16 15:55:07 t61 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    lis 16 15:55:07 t61 kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    lis 16 15:55:07 t61 kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    lis 16 15:55:07 t61 kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    lis 16 15:55:07 t61 kernel: PCI host bridge to bus 0000:00
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
    lis 16 15:55:07 t61 kernel: pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    lis 16 15:55:07 t61 kernel: pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    lis 16 15:55:07 t61 kernel: pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
    lis 16 15:55:07 t61 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xfe225000-0xfe225fff]
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    lis 16 15:55:07 t61 kernel: pci 0000:00:19.0: System wakeup disabled by ACPI
    lis 16 15:55:07 t61 kernel: pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfe220000-0xfe223fff 64bit]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x14: [io 0x1c1c-0x1c1f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x1c18-0x1c1b]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.2: PME# supported from D3hot
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: [10de:0429] type 00 class 0x030000
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
    lis 16 15:55:08 t61 kernel: pci 0000:03:00.0: reg 0x10: [mem 0xdf2fe000-0xdf2fffff 64bit]
    lis 16 15:55:08 t61 kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: PCI bridge to [bus 04]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: reg 0x10: [mem 0xf8100000-0xf8100fff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: supports D1 D2
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.1: reg 0x10: [mem 0xf8101000-0xf81017ff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.1: supports D1 D2
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
    lis 16 15:55:08 t61 kernel: acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    lis 16 15:55:08 t61 kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    lis 16 15:55:08 t61 kernel: ACPI : EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
    lis 16 15:55:08 t61 kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
    lis 16 15:55:08 t61 kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    lis 16 15:55:08 t61 kernel: vgaarb: loaded
    lis 16 15:55:08 t61 kernel: vgaarb: bridge control possible 0000:01:00.0
    lis 16 15:55:08 t61 kernel: PCI: Using ACPI for IRQ routing
    lis 16 15:55:08 t61 kernel: PCI: pci_cache_line_size set to 64 bytes
    lis 16 15:55:08 t61 kernel: e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    lis 16 15:55:08 t61 kernel: e820: reserve RAM buffer [mem 0xbeeb0000-0xbfffffff]
    lis 16 15:55:08 t61 kernel: NetLabel: Initializing
    lis 16 15:55:08 t61 kernel: NetLabel: domain hash size = 128
    lis 16 15:55:08 t61 kernel: NetLabel: protocols = UNLABELED CIPSOv4
    lis 16 15:55:08 t61 kernel: NetLabel: unlabeled traffic allowed by default
    lis 16 15:55:08 t61 kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    lis 16 15:55:08 t61 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    lis 16 15:55:08 t61 kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    lis 16 15:55:08 t61 kernel: Switched to clocksource hpet
    lis 16 15:55:08 t61 kernel: pnp: PnP ACPI init
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x164e-0x164f] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x1000-0x107f] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x1180-0x11bf] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x0800-0x080f] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x15e0-0x15ef] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [io 0x1600-0x165f] could not be reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
    lis 16 15:55:08 t61 kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    lis 16 15:55:08 t61 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    lis 16 15:55:08 t61 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    lis 16 15:55:08 t61 kernel: pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
    lis 16 15:55:08 t61 kernel: pnp 00:05: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
    lis 16 15:55:08 t61 kernel: pnp: PnP ACPI: found 6 devices
    lis 16 15:55:08 t61 kernel: pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: PCI bridge to [bus 04]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: BAR 13: assigned [io 0x8000-0x80ff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: BAR 14: assigned [io 0x8400-0x84ff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: CardBus bridge to [bus 16-17]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: bridge window [io 0x8000-0x80ff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: bridge window [io 0x8400-0x84ff]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
    lis 16 15:55:08 t61 kernel: pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: PCI bridge to [bus 15-18]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 11 [mem 0xbf000000-0xfebfffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed4bfff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd6ffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdf2fffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:0d: resource 2 [mem 0xdf400000-0xdf4fffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 0 [io 0x8000-0xbfff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 1 [mem 0xf8100000-0xfbffffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 10 [mem 0x000dc000-0x000dffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 11 [mem 0xbf000000-0xfebfffff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:15: resource 12 [mem 0xfed40000-0xfed4bfff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: resource 0 [io 0x8000-0x80ff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: resource 1 [io 0x8400-0x84ff]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
    lis 16 15:55:08 t61 kernel: pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
    lis 16 15:55:08 t61 kernel: NET: Registered protocol family 2
    lis 16 15:55:08 t61 kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    lis 16 15:55:08 t61 kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    lis 16 15:55:08 t61 kernel: TCP: Hash tables configured (established 32768 bind 32768)
    lis 16 15:55:08 t61 kernel: TCP: reno registered
    lis 16 15:55:08 t61 kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    lis 16 15:55:08 t61 kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    lis 16 15:55:08 t61 kernel: NET: Registered protocol family 1
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: Video device with shadowed ROM
    lis 16 15:55:08 t61 kernel: PCI: CLS mismatch (64 != 32), using 64 bytes
    lis 16 15:55:08 t61 kernel: Unpacking initramfs...
    lis 16 15:55:08 t61 kernel: Freeing initrd memory: 3276K (ffff88003798a000 - ffff880037cbd000)
    lis 16 15:55:08 t61 kernel: Simple Boot Flag at 0x35 set to 0x1
    lis 16 15:55:08 t61 kernel: microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
    lis 16 15:55:08 t61 kernel: microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
    lis 16 15:55:08 t61 kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    lis 16 15:55:08 t61 kernel: Scanning for low memory corruption every 60 seconds
    lis 16 15:55:08 t61 kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
    lis 16 15:55:08 t61 kernel: Initialise system trusted keyring
    lis 16 15:55:08 t61 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    lis 16 15:55:08 t61 kernel: zpool: loaded
    lis 16 15:55:08 t61 kernel: zbud: loaded
    lis 16 15:55:08 t61 kernel: VFS: Disk quotas dquot_6.5.2
    lis 16 15:55:08 t61 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    lis 16 15:55:08 t61 kernel: msgmni has been set to 5989
    lis 16 15:55:08 t61 kernel: Key type big_key registered
    lis 16 15:55:08 t61 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    lis 16 15:55:08 t61 kernel: io scheduler noop registered
    lis 16 15:55:08 t61 kernel: io scheduler deadline registered
    lis 16 15:55:08 t61 kernel: io scheduler cfq registered (default)
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    lis 16 15:55:08 t61 kernel: pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    lis 16 15:55:08 t61 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    lis 16 15:55:08 t61 kernel: pciehp: Using ACPI for slot detection.
    lis 16 15:55:08 t61 kernel: pciehp 0000:00:1c.3:pcie04: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
    lis 16 15:55:08 t61 kernel: pciehp 0000:00:1c.3:pcie04: Timeout on hotplug command 0x00000000 (issued 1333 msec ago)
    lis 16 15:55:08 t61 kernel: pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
    lis 16 15:55:08 t61 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    lis 16 15:55:08 t61 kernel: vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    lis 16 15:55:08 t61 kernel: vesafb: scrolling: redraw
    lis 16 15:55:08 t61 kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    lis 16 15:55:08 t61 kernel: vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90004780000, using 5120k, total 5120k
    lis 16 15:55:08 t61 kernel: Console: switching to colour frame buffer device 160x64
    lis 16 15:55:08 t61 kernel: fb0: VESA VGA frame buffer device
    lis 16 15:55:08 t61 kernel: intel_idle: does not run on family 6 model 23
    lis 16 15:55:08 t61 kernel: GHES: HEST is not enabled!
    lis 16 15:55:08 t61 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    lis 16 15:55:08 t61 kernel: Linux agpgart interface v0.103
    lis 16 15:55:08 t61 kernel: rtc_cmos 00:02: RTC can wake from S4
    lis 16 15:55:08 t61 kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    lis 16 15:55:08 t61 kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    lis 16 15:55:08 t61 kernel: ledtrig-cpu: registered to indicate activity on CPUs
    lis 16 15:55:08 t61 kernel: TCP: cubic registered
    lis 16 15:55:08 t61 kernel: NET: Registered protocol family 10
    lis 16 15:55:08 t61 kernel: NET: Registered protocol family 17
    lis 16 15:55:08 t61 kernel: Loading compiled-in X.509 certificates
    lis 16 15:55:08 t61 kernel: registered taskstats version 1
    lis 16 15:55:08 t61 kernel: Magic number: 6:608:940
    lis 16 15:55:08 t61 kernel: pci_express 0000:00:1c.3:pcie08: hash matches
    lis 16 15:55:08 t61 kernel: rtc_cmos 00:02: setting system clock to 2014-11-16 14:54:59 UTC (1416149699)
    lis 16 15:55:08 t61 kernel: PM: Hibernation image not present or could not be loaded.
    lis 16 15:55:08 t61 kernel: Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    lis 16 15:55:08 t61 kernel: Write protecting the kernel read-only data: 8192k
    lis 16 15:55:08 t61 kernel: Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    lis 16 15:55:08 t61 kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    lis 16 15:55:08 t61 kernel: random: systemd-tmpfile urandom read with 3 bits of entropy available
    lis 16 15:55:08 t61 kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    lis 16 15:55:08 t61 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    lis 16 15:55:08 t61 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    lis 16 15:55:08 t61 kernel: ACPI: bus type USB registered
    lis 16 15:55:08 t61 kernel: usbcore: registered new interface driver usbfs
    lis 16 15:55:08 t61 kernel: usbcore: registered new interface driver hub
    lis 16 15:55:08 t61 kernel: usbcore: registered new device driver usb
    lis 16 15:55:08 t61 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    lis 16 15:55:08 t61 kernel: uhci_hcd: USB Universal Host Controller Interface driver
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.0: detected 2 ports
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    lis 16 15:55:08 t61 kernel: hub 1-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 1-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: ehci-pci: EHCI PCI platform driver
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.1: detected 2 ports
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    lis 16 15:55:08 t61 kernel: hub 2-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 2-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
    lis 16 15:55:08 t61 kernel: hub 3-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 3-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
    lis 16 15:55:08 t61 kernel: hub 4-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 4-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
    lis 16 15:55:08 t61 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
    lis 16 15:55:08 t61 kernel: hub 5-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 5-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
    lis 16 15:55:08 t61 kernel: SCSI subsystem initialized
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
    lis 16 15:55:08 t61 kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
    lis 16 15:55:08 t61 kernel: libata version 3.00 loaded.
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    lis 16 15:55:08 t61 kernel: hub 6-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 6-0:1.0: 4 ports detected
    lis 16 15:55:08 t61 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    lis 16 15:55:08 t61 kernel: hub 1-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 1-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    lis 16 15:55:08 t61 kernel: hub 2-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 2-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: ata_piix 0000:00:1f.1: version 2.13
    lis 16 15:55:08 t61 kernel: scsi host0: ata_piix
    lis 16 15:55:08 t61 kernel: scsi host1: ata_piix
    lis 16 15:55:08 t61 kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
    lis 16 15:55:08 t61 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
    lis 16 15:55:08 t61 kernel: ahci 0000:00:1f.2: version 3.0
    lis 16 15:55:08 t61 kernel: ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
    lis 16 15:55:08 t61 kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
    lis 16 15:55:08 t61 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    lis 16 15:55:08 t61 kernel: ata2: port disabled--ignoring
    lis 16 15:55:08 t61 kernel: scsi host2: ahci
    lis 16 15:55:08 t61 kernel: scsi host3: ahci
    lis 16 15:55:08 t61 kernel: scsi host4: ahci
    lis 16 15:55:08 t61 kernel: ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 30
    lis 16 15:55:08 t61 kernel: ata4: DUMMY
    lis 16 15:55:08 t61 kernel: ata5: DUMMY
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: debug port 1
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
    lis 16 15:55:08 t61 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    lis 16 15:55:08 t61 kernel: hub 7-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 7-0:1.0: 6 ports detected
    lis 16 15:55:08 t61 kernel: hub 3-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 3-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: hub 4-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 4-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: hub 5-0:1.0: USB hub found
    lis 16 15:55:08 t61 kernel: hub 5-0:1.0: 2 ports detected
    lis 16 15:55:08 t61 kernel: ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
    lis 16 15:55:08 t61 kernel: ata1.00: configured for UDMA/33
    lis 16 15:55:08 t61 kernel: scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5
    lis 16 15:55:08 t61 kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    lis 16 15:55:08 t61 kernel: ata3.00: ATA-8: WDC WD3200BEVT-00A23T0, 01.01A01, max UDMA/133
    lis 16 15:55:08 t61 kernel: ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    lis 16 15:55:08 t61 kernel: ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    lis 16 15:55:08 t61 kernel: ata3.00: configured for UDMA/133
    lis 16 15:55:08 t61 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 1A01 PQ: 0 ANSI: 5
    lis 16 15:55:08 t61 kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    lis 16 15:55:08 t61 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    lis 16 15:55:08 t61 kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
    lis 16 15:55:08 t61 kernel: sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    lis 16 15:55:08 t61 kernel: sd 2:0:0:0: [sda] Write Protect is off
    lis 16 15:55:08 t61 kernel: sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    lis 16 15:55:08 t61 kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    lis 16 15:55:08 t61 kernel: sda: sda1 sda2 sda3
    lis 16 15:55:08 t61 kernel: sd 2:0:0:0: [sda] Attached SCSI disk
    lis 16 15:55:08 t61 kernel: firewire_core 0000:15:00.1: created device fw0: GUID 00061b032a56ecc5, S400
    lis 16 15:55:08 t61 kernel: usb 1-1: new full-speed USB device number 2 using uhci_hcd
    lis 16 15:55:08 t61 kernel: usb 1-2: new full-speed USB device number 3 using uhci_hcd
    lis 16 15:55:08 t61 kernel: usb 2-1: new low-speed USB device number 2 using uhci_hcd
    lis 16 15:55:08 t61 kernel: hidraw: raw HID events driver (C) Jiri Kosina
    lis 16 15:55:08 t61 kernel: usbcore: registered new interface driver usbhid
    lis 16 15:55:08 t61 kernel: usbhid: USB HID core driver
    lis 16 15:55:08 t61 kernel: input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/0003:045E:00D1.0001/input/input2
    lis 16 15:55:08 t61 kernel: hid-generic 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:1a.1-1/input0
    lis 16 15:55:08 t61 kernel: floppy0: no floppy controllers found
    lis 16 15:55:08 t61 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    lis 16 15:55:08 t61 kernel: random: nonblocking pool is initialized
    lis 16 15:55:08 t61 kernel: fuse init (API version 7.23)
    lis 16 15:55:08 t61 kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    lis 16 15:55:08 t61 systemd-journal[126]: Journal started
    lis 16 15:55:06 t61 systemd-modules-load[124]: Inserted module 'fuse'
    lis 16 15:55:07 t61 systemd-udevd[151]: starting version 217
    lis 16 15:55:09 t61 kernel: Monitor-Mwait will be used to enter C-1 state
    lis 16 15:55:09 t61 kernel: Monitor-Mwait will be used to enter C-2 state
    lis 16 15:55:09 t61 kernel: Monitor-Mwait will be used to enter C-3 state
    lis 16 15:55:09 t61 kernel: ACPI: acpi_idle registered with cpuidle
    lis 16 15:55:09 t61 kernel: tpm_tis 00:05: 1.2 TPM (device-id 0x3203, rev-id 9)
    lis 16 15:55:09 t61 kernel: ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    lis 16 15:55:09 t61 kernel: acpi device:06: registered as cooling_device2
    lis 16 15:55:09 t61 kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input3
    lis 16 15:55:09 t61 kernel: tpm_tis 00:05: TPM is disabled/deactivated (0x6)
    lis 16 15:55:09 t61 kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
    lis 16 15:55:09 t61 kernel: ACPI: Lid Switch [LID]
    lis 16 15:55:09 t61 kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    lis 16 15:55:09 t61 kernel: ACPI: Sleep Button [SLPB]
    lis 16 15:55:09 t61 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    lis 16 15:55:09 t61 kernel: ACPI: Power Button [PWRF]
    lis 16 15:55:09 t61 kernel: snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac
    lis 16 15:55:09 t61 kernel: snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
    lis 16 15:55:09 t61 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    lis 16 15:55:09 t61 kernel: pps_core: LinuxPPS API ver. 1 registered
    lis 16 15:55:09 t61 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    lis 16 15:55:09 t61 kernel: wmi: Mapper loaded
    lis 16 15:55:09 t61 kernel: thermal LNXTHERM:00: registered as thermal_zone0
    lis 16 15:55:09 t61 kernel: ACPI: Thermal Zone [THM0] (58 C)
    lis 16 15:55:09 t61 kernel: thermal LNXTHERM:01: registered as thermal_zone1
    lis 16 15:55:09 t61 kernel: ACPI: Thermal Zone [THM1] (60 C)
    lis 16 15:55:09 t61 kernel: ACPI: Battery Slot [BAT0] (battery present)
    lis 16 15:55:09 t61 kernel: PTP clock support registered
    lis 16 15:55:09 t61 kernel: ACPI: AC Adapter [AC] (on-line)
    lis 16 15:55:10 t61 kernel: Non-volatile memory driver v1.3
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.25
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: ThinkPad BIOS 7LETD0WW (2.30 ), EC 7KHT24WW-1.08
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: Lenovo ThinkPad T61, model 7664R6G
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: detected a 16-level brightness capable ThinkPad
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: ACPI backlight control delay disabled
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: radio switch found; radios are enabled
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    lis 16 15:55:10 t61 kernel: thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    lis 16 15:55:10 t61 kernel: input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
    lis 16 15:55:10 t61 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    l

    If it is that bug, the fix is in 3.17.3 which is in [core] now.
    My experience is crashes like that are usually hardware instability.  Last time it happened to me it was because my RAM.  I had to underclock it to make it stable.  If the kernel update doesn't help you, you could try running a stress test like Prime95.
    http://www.mersenne.org/download/
    If your hardware is unstable it will usually crash after only 5-10 minutes.  If you can run it for multiple hours that can help rule out hardware.

  • ArchLinux Installation disk doesn't recognize Macbook Air SSD[SOLVED]

    I want to install ArchLinux on my new MacBook Air (dual boot), I made a dd of the installation iso to a usb disk. The usb disk can boot and run, but it cannot recognize the hard drive(SSD) of Macbook air.
    There are three disk files in dev: /dev/sda /dev/sda1 and /dev/sdb
    /dev/sda is the usb disk, /dev/sdb cannot be opened by parted and cannnot be mounted (it reports "no medium found") and I believe it is the sd card reader.
    What can I do?
    dmesg shows the following errors:
    ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: limiting SATA link speed to 1.5 Gbps
    ata1: COMRESET failed (errno=-16)
    ata1: reset failed, giving up
    and lots of
    applesmc: wait status failed: 5 != 0
    applesmc: failed to init the device
    this is  whole dmesg
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
    BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
    BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000006f000000 (usable)
    BIOS-e820: 000000006f000000 - 000000007f000000 (reserved)
    BIOS-e820: 000000007f000000 - 000000007f719000 (usable)
    BIOS-e820: 000000007f719000 - 000000007f939000 (ACPI NVS)
    BIOS-e820: 000000007f939000 - 000000007fef9000 (ACPI data)
    BIOS-e820: 000000007fef9000 - 000000007feff000 (reserved)
    BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI data)
    BIOS-e820: 0000000093200000 - 0000000093201000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.4 present.
    last_pfn = 0x7f719 max_arch_pfn = 0x100000
    MTRR default type: write-back
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-FFFFF uncachable
    MTRR variable ranges enabled:
    0 base 080000000 mask F80000000 uncachable
    1 base 07FF00000 mask FFFF00000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000008f000 (usable)
    modified: 000000000008f000 - 0000000000090000 (reserved)
    modified: 0000000000090000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000006f000000 (usable)
    modified: 000000006f000000 - 000000007f000000 (reserved)
    modified: 000000007f000000 - 000000007f719000 (usable)
    modified: 000000007f719000 - 000000007f939000 (ACPI NVS)
    modified: 000000007f939000 - 000000007fef9000 (ACPI data)
    modified: 000000007fef9000 - 000000007feff000 (reserved)
    modified: 000000007feff000 - 000000007ff00000 (ACPI data)
    modified: 0000000093200000 - 0000000093201000 (reserved)
    modified: 00000000f0000000 - 00000000f4000000 (reserved)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ffc00000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 6e7e5000 - 6efde026
    Allocated new RAMDISK: 00100000 - 008f9026
    Move RAMDISK from 000000006e7e5000 - 000000006efde025 to 00100000 - 008f9025
    ACPI: RSDP 000fe020 00024 (v02 APPLE )
    ACPI: XSDT 7f96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
    ACPI: FACP 7f968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
    ACPI: DSDT 7f95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
    ACPI: FACS 7f71e000 00040
    ACPI: HPET 7f967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: APIC 7f966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: APIC 7f965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: ASF! 7f963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SBST 7f962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: ECDT 7f961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SSDT 7f957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
    ACPI: SSDT 7f956000 000FC (v01 APPLE SDCard 00001000 INTL 20061109)
    ACPI: SSDT 7f954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
    ACPI: MCFG 7f964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SSDT 7f95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
    ACPI: SSDT 7f959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    1151MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00016000 - 0001cf00
    (10 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
    #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #4 [0001551000 - 00015571d5] BRK ==> [0001551000 - 00015571d5]
    #5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
    #6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
    #7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
    #8 [0000100000 - 00008f9026] NEW RAMDISK ==> [0000100000 - 00008f9026]
    #9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f719
    Movable zone start PFN for each node
    early_node_map[5] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000010 -> 0x0000008f
    0: 0x00000090 -> 0x0000009f
    0: 0x00000100 -> 0x0006f000
    0: 0x0007f000 -> 0x0007f719
    On node 0 totalpages: 456361
    free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2303 pages used for memmap
    HighMem zone: 226844 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000008f000 - 0000000000090000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 93201000 (gap: 93201000:5cdff000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u2097152
    pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452282
    Kernel command line: initrd=/boot/i686/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/i686/vmlinuz26
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    allocated 10440180 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Initializing HighMem for node 0 (000377fe:0007f719)
    Memory: 1783248k/2088036k available (2895k kernel code, 41140k reserved, 1208k data, 408k init, 916588k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1403000 - 0xc1469000 ( 408 kB)
    .data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
    .text : 0xc1000000 - 0xc12d3f1e (2895 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1858.186 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3717.22 BogoMIPS (lpj=6193953)
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20091214
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    Brought up 2 CPUs
    Total of 2 processors activated (7435.67 BogoMIPS).
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
    PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
    pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
    pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
    pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
    pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.4: reg 10: [mem 0x93200000-0x9327ffff]
    pci 0000:00:04.0: reg 10: [mem 0x9328a000-0x9328afff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10: [mem 0x9328b100-0x9328b1ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: reg 10: [mem 0x93289000-0x93289fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: reg 10: [mem 0x9328b000-0x9328b0ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: reg 10: [mem 0x93280000-0x93283fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
    pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
    pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
    pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
    pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
    pci 0000:00:0a.0: reg 24: [mem 0x93284000-0x93285fff]
    pci 0000:00:0b.0: reg 10: [mem 0x93288000-0x93288fff]
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:01:00.0: reg 10: [mem 0x93100000-0x93103fff 64bit]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:01:00.0: PME# disabled
    pci 0000:00:15.0: PCI bridge to [bus 01-01]
    pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
    pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92ffffff]
    pci 0000:02:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref]
    pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
    pci 0000:02:00.0: reg 30: [mem 0x93000000-0x9301ffff pref]
    pci 0000:00:17.0: PCI bridge to [bus 02-02]
    pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
    pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
    pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp: PnP ACPI: found 8 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:06: [io 0x0400-0x047f] has been reserved
    system 00:06: [io 0x0480-0x04ff] has been reserved
    system 00:06: [io 0x0500-0x057f] has been reserved
    system 00:06: [io 0x0580-0x05ff] has been reserved
    system 00:06: [io 0x0800-0x087f] has been reserved
    system 00:06: [io 0x0880-0x08ff] has been reserved
    system 00:06: [io 0x04d0-0x04d1] has been reserved
    system 00:06: [io 0x0295-0x0296] has been reserved
    pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
    pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
    pci 0000:00:15.0: PCI bridge to [bus 01-01]
    pci 0000:00:15.0: bridge window [io disabled]
    pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
    pci 0000:00:15.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 02-02]
    pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
    pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
    pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
    pci 0000:00:15.0: power state changed by ACPI to D0
    pci 0000:00:15.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
    pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:15.0: setting latency timer to 64
    pci 0000:00:17.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
    pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
    pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:02:00.0: Boot video device
    PCI: CLS 256 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 8164k freed
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1292314287.046:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1710
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:15.0: setting latency timer to 64
    pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
    ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:04.1: debug port 1
    SCSI subsystem initialized
    ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0x9328b100
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
    ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0x9328b000
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
    ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0x9328a000
    libata version 3.00 loaded.
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
    pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
    pata_acpi 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
    pata_acpi 0000:00:0a.0: setting latency timer to 64
    pata_acpi 0000:00:0a.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
    ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 18, io mem 0x93289000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    ahci 0000:00:0a.0: version 3.0
    ahci 0000:00:0a.0: power state changed by ACPI to D0
    ahci 0000:00:0a.0: power state changed by ACPI to D0
    ahci 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:0a.0: irq 25 for MSI/MSI-X
    ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl IDE mode
    ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
    ahci 0000:00:0a.0: setting latency timer to 64
    scsi0 : ahci
    ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    Initializing USB Mass Storage driver...
    scsi1 : usb-storage 1-1:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb 1-6: new high speed USB device using ehci_hcd and address 5
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    scsi2 : usb-storage 2-1:1.0
    usb 2-2: new high speed USB device using ehci_hcd and address 3
    usb 3-3: new full speed USB device using ohci_hcd and address 2
    usbcore: registered new interface driver hiddev
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input1
    generic-usb 0003:05AC:023F.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
    generic-usb 0003:05AC:023F.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input2
    generic-usb 0003:05AC:023F.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    usb 3-5: new full speed USB device using ohci_hcd and address 3
    hub 3-5:1.0: USB hub found
    hub 3-5:1.0: 3 ports detected
    usb 3-5.1: new full speed USB device using ohci_hcd and address 4
    input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input3
    generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
    usb 3-5.2: new full speed USB device using ohci_hcd and address 5
    input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input4
    generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
    usb 3-5.3: new full speed USB device using ohci_hcd and address 6
    scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
    ata1: link is slow to respond, please be patient (ready=0)
    scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
    sd 1:0:0:0: [sda] 3905536 512-byte logical blocks: (1.99 GB/1.86 GiB)
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sd 1:0:0:0: [sda] Attached SCSI removable disk
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: limiting SATA link speed to 1.5 Gbps
    ata1: COMRESET failed (errno=-16)
    ata1: reset failed, giving up
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    eth0: register 'asix' at usb-0000:00:06.1-2, ASIX AX88772 USB 2.0 Ethernet, 58:55:ca:24:b3:52
    usbcore: registered new interface driver asix
    UDF-fs: Partition marked readonly; forcing readonly mount
    aufs 2-standalone.tree-33-20100426
    loop: module loaded
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    aufs test_add:248:mount[967]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
    aufs test_add:248:mount[972]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
    udev: starting version 151
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
    ACPI: Power Button [PWRF]
    ACPI: SSDT 7f71dc98 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    ACPI: SSDT 7f71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    Monitor-Mwait will be used to enter C-1 state
    applesmc: Apple MacBook Air detected:
    applesmc: - Model with accelerometer
    applesmc: - Model with light sensors and backlight
    applesmc: - Model with 15 temperature sensors
    Monitor-Mwait will be used to enter C-2 state
    Linux video capture interface: v2.00
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: SSDT 7f71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    ACPI: SSDT 7f71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    ACPI: AC Adapter [ADP1] (on-line)
    Switching to clocksource hpet
    uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
    input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    ACPI: Battery Slot [BAT0] (battery present)
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input11
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    applesmc: wait status failed: 5 != 0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: failed to init the device
    applesmc: 1 fans found.
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    input: applesmc as /devices/platform/applesmc.768/input/input12
    Registered led device: smc::kbd_backlight
    applesmc: driver successfully loaded.
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    this is lspci -vvv output
    00:00.0 Host bridge: nVidia Corporation Device 0d60 (rev a1)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    00:00.1 RAM memory: nVidia Corporation Device 0d68 (rev a1)
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    00:01.0 RAM memory: nVidia Corporation Device 0d6d (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.1 RAM memory: nVidia Corporation Device 0d6e (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.2 RAM memory: nVidia Corporation Device 0d6f (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.3 RAM memory: nVidia Corporation Device 0d70 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:02.0 RAM memory: nVidia Corporation Device 0d71 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:02.1 RAM memory: nVidia Corporation Device 0d72 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.0 ISA bridge: nVidia Corporation Device 0d80 (rev a2)
    Subsystem: Apple Computer Inc. Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: I/O ports at 2100 [size=256]
    00:03.1 RAM memory: nVidia Corporation Device 0d7b (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.2 SMBus: nVidia Corporation Device 0d79 (rev a1)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 2000 [size=256]
    Region 4: I/O ports at 2240 [size=64]
    Region 5: I/O ports at 2200 [size=64]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    00:03.3 RAM memory: nVidia Corporation Device 0d69 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.4 Co-processor: nVidia Corporation Device 0d7a (rev a1)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 14
    Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=512K]
    00:04.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at 9328a000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ohci_hcd
    00:04.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 22
    Region 0: Memory at 9328b100 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=00a0
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ehci_hcd
    00:06.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at 93289000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ohci_hcd
    00:06.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 21
    Region 0: Memory at 9328b000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=00a0
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ehci_hcd
    00:08.0 Audio device: nVidia Corporation Device 0d94 (rev a2)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at 93280000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Address: 0000000000000000 Data: 0000
    Masking: 00000000 Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: HDA Intel
    00:0a.0 IDE interface: nVidia Corporation Device 0d85 (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: Apple Computer Inc. Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 25
    Region 0: I/O ports at 2298 [size=8]
    Region 1: I/O ports at 22a4 [size=4]
    Region 2: I/O ports at 2290 [size=8]
    Region 3: I/O ports at 22a0 [size=4]
    Region 4: I/O ports at 2280 [size=16]
    Region 5: Memory at 93284000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] SATA HBA v1.0 InCfgSpace
    Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
    Address: 00000000fee0300c Data: 4181
    Kernel driver in use: ahci
    00:0b.0 RAM memory: nVidia Corporation Device 0d75 (rev a1)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 0
    Region 0: Memory at 93288000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Address: 0000000000000000 Data: 0000
    Masking: 00000000 Pending: 00000000
    00:15.0 PCI bridge: nVidia Corporation Device 0d9b (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: 93100000-931fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device 0000
    Capabilities: [48] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Address: 00000000fee0300c Data: 4151
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag+ RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot+
    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
    Control: AttnInd Off, PwrInd On, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState+
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Kernel driver in use: pcieport
    00:17.0 PCI bridge: nVidia Corporation Device 0d76 (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: 92000000-930fffff
    Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device 0000
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    01:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
    Subsystem: Apple Computer Inc. Device 00d1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 14
    Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
    Capabilities: [58] Vendor Specific Information: Len=78 <?>
    Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [d0] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
    ClockPM+ Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Advanced Error Reporting
    UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
    Capabilities: [13c v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    Capabilities: [160 v1] Device Serial Number 1c-11-ca-ff-ff-f5-58-55
    Capabilities: [16c v1] Power Budgeting <?>
    02:00.0 VGA compatible controller: nVidia Corporation Device 08a3 (rev a2) (prog-if 00 [VGA controller])
    Subsystem: Apple Computer Inc. Device 00d3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at 1000 [size=128]
    Expansion ROM at 93000000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [e0] Vendor Specific Information: Len=14 <?>
    Last edited by steamedfish (2010-12-14 18:13:28)

    Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.

  • Switching to archlinux on MacBook Pro 13'' (december 2010)

    Hi all!
    I've been missing a lot archlinux since i bought a 13 inches MacBook Pro in december.
    So i started looking around on the forum get some informations about using Arch on the MB, and i'm very happy that all runs smoothly without issues.
    Before moving, tho, i still have some questions.
    I bought this laptop for three reasons: the battery, the mobility and the multitouch.
    I do a lot of developing, always moving from university to office to home, and i needed a robust and quick laptop with a lot of battery time, other than low weight.
    I use it for django and python developing (so, also, mysql server) and c/c++/java for university projects, and with those i am sure i'll have no problem!
    I need to have windows installed too (just for steam, actually, and dawn of war 2), to be sure i can use the mini display port (with hdmi, for the external monitor and movies) and have no problems with the graphic chipset (just to play hd videos on the monitor)
    If i'm leaving osx (lot of bloatness) for arch, i'll be back to my minimal configuration with urxvt, xmonad (or awesome), irssi, vim and mpd, xrandr to handle the multi monitors and old proud conkeror as browser.
    So, in the end, what about the mini display port? And will i be able to mantain my battery time (or even improving it, by using a low-resource minimal system like arch)? Any issues i should know about?
    Thanks all in advance for your opinion!

    Can't seem to find mini display port.
    It seems others have been successful, alas I am not.  I am attempting to attach an external monitor on my aluminum body macbook running Arch, but the mini display port seems to be evading detection.
    Output of lspci:
    [09:44:10] tds3 ~ $ lspci
    00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
    00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
    00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
    00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
    00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
    00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
    00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
    00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
    00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
    00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
    00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
    00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
    00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
    00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
    00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
    00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1)
    00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
    00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
    02:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400M] (rev b1)
    03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
    Output of xrandr -q: (with external monitor attached and powered on)
    [09:49:18] tds3 ~ $ xrandr -q
    xrandr: Failed to get size of gamma for output default
    Screen 0: minimum 320 x 175, current 1280 x 800, maximum 1280 x 800
    default connected 1280x800+0+0 0mm x 0mm
       1280x800       50.0*
       1024x768       51.0     52.0 
       832x624        53.0 
       800x600        54.0     55.0     56.0     57.0     58.0 
       720x400        59.0 
       700x525        60.0 
       640x512        61.0     62.0 
       640x480        63.0     64.0     65.0     66.0     67.0 
       640x400        68.0 
       640x350        69.0 
       576x432        70.0 
       512x384        71.0     72.0     73.0     74.0     75.0 
       416x312        76.0 
       400x300        77.0     78.0     79.0     80.0     81.0 
       360x200        82.0 
       320x240        83.0     84.0     85.0     86.0 
       320x200        87.0 
       320x175        88.0 
    Does this make sense?

  • Trouble installing ZFS in archlinux kernel 3.6.3-1-ARCH

    I've been trying to install ZFS on my system, and i can't get past a building error for SPL, here is my install output:
    ==> Downloading zfs PKGBUILD from AUR...
    x zfs_preempt.patch
    x zfs.install
    x PKGBUILD
    Comment by: modular on Wed, 24 Oct 2012 03:09:04 +0000
    @demizer
    I don't/won't run ZFS as a root file system. I'm getting the following build error:
    http://pastebin.com/ZcWiaViK
    Comment by: demizer on Wed, 24 Oct 2012 04:11:54 +0000
    @modular, You're trying to build with the 3.6.2 kernel. The current version (rc11) does not work with the 3.6.2 kernel. If you want to use it, you will have to downgrade to the 3.5.6 kernel (linux and linux-headers). https://wiki.archlinux.org/index.php/Downgrading_Packages
    Thanks!
    Comment by: MilanKnizek on Wed, 24 Oct 2012 08:07:19 +0000
    @demizer: there still seemed to be a problem during upgrading - zfs/spl requires kernel of certain version (hard-coded) and this blocks the upgrade (the old installed zfs/spl requires the old kernel and kernel can't be upgraded w/o breaking dependency of zfs/spl and therefore build of the new zfs/spl fails, too).
    So far, I have had to remove zpl/spl, upgrade kernel, rebuild + install spl/zfs and manually run depmod against the new kernel (i.e. the postinst: depmod -a does not work until next reboot) and only then reboot to load the new kernel zfs modules successfully.
    That is quite clumsy and error-prone - I hope it will be resolved via DMKS.
    Comment by: srf21c on Sun, 28 Oct 2012 04:00:31 +0000
    All, if you're suffering zfs kernel upgrade pain fatigue, seriously consider going with the LTS (long term support) kernel. I just successfully built zfs on a system that I switched to the linux-lts 3.0.48-1. All you have to do is install the linux-lts and linux-lts-headers packages, reboot to the lts kernel, and change any instances of depends= or makedepends= lines in the package build file like so:
    Before:
    depends=('linux=3.5' "spl=${pkgver}" "zfs-utils=${pkgver}")
    makedepends=('linux-headers=3.5')
    After:
    depends=('linux-lts=3.0' "spl=${pkgver}" "zfs-utils=${pkgver}")
    makedepends=('linux-lts-headers=3.0')
    Then build and install each package in this order: spl-utils,spl,zfs-utils,zfs.
    Worked like a champ for me.
    Comment by: stoone on Mon, 29 Oct 2012 12:09:29 +0000
    If you keep the linux, and linux-headers packages while using the LTS you don't need to modify the PKGBUILDs. Because the checks will pass but it will build the packages to your current runnning kernel.
    Comment by: demizer on Mon, 29 Oct 2012 15:56:27 +0000
    Hey everybody, just a quick update. The new build tool I have been working on is now in master, https://github.com/demizer/aur-zfs. With it you can build and package two different groups of packages one for aur and one for split. Again, building the split packages is more efficient. I still have a lot of work to be done, but it is progressing. I will be adding git, dkms, and lts packages after I setup my repo. My next step is to add unofficial repository support to my build tool so I can easily setup a repo with precompiled binaries. I will be hosting the repo on my website at http://demizerone.com/archzfs. Initially it will only be for 64bit code since the ZOL FAQ states that ZOL is very unstable with 32bit code due to memory management differences in Solaris and Linux. I will notify you all in the future when that is ready to go.
    @MilanKnizek, Yes updating is a pain. ZFS itself is hard-coded to linux versions at build time. The ZFS build tool puts the modules in "/usr/lib/modules/3.5.6-1-ARCH/addon/zfs/", and this the primary reason it has to be rebuilt each upgrade, even minor point releases. Nvidia for example puts their module in "/usr/lib/modules/extramodules-3.5-ARCH/", so minor point releases are still good and the nvidia package doesn't need to be re-installed. A possible reason for ZOL to be hard-coded like this because ZOL is still technically very beta code.
    I do have a question for the community, does anyone use ZFS on a 32bit system?
    Thanks!
    First Submitted: Thu, 23 Sep 2010 08:50:51 +0000
    zfs 0.6.0_rc11-2
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> zfs dependencies:
    - linux>=3.5 (already installed)
    - linux-headers>=3.5 (already installed)
    - spl>=0.6.0_rc11 (building from AUR)
    - zfs-utils>=0.6.0_rc11 (building from AUR)
    ==> Edit zfs.install ? [Y/n] ("A" to abort)
    ==> ---------------------------------------
    n
    ==> Continue building zfs ? [Y/n]
    ==> -----------------------------
    ==>
    ==> Building and installing package
    ==> Install or build missing dependencies for zfs:
    ==> Downloading spl PKGBUILD from AUR...
    x spl.install
    x PKGBUILD
    Comment by: timemaster on Mon, 15 Oct 2012 22:42:32 +0000
    I am not able to compile this package after the upgrade to the 3.6 kernel. Anyone else ? any idea?
    Comment by: mikers on Mon, 15 Oct 2012 23:34:17 +0000
    rc11 doesn't support Linux 3.6; there are some patches on GitHub that might apply against it (I've not done it myself), see:
    https://github.com/zfsonlinux/spl/pull/179
    https://github.com/zfsonlinux/zfs/pull/1039
    Otherwise downgrade to Linux 3.5.x or linux-lts and wait for rc12.
    Comment by: timemaster on Mon, 15 Oct 2012 23:54:03 +0000
    Yes, I saw that too late.
    https://github.com/zfsonlinux/zfs/commit/ee7913b644a2c812a249046f56eed39d1977d706
    Comment by: demizer on Tue, 16 Oct 2012 07:00:16 +0000
    Looks like the patches have been merged, now we wait for rc12.
    Comment by: vroomanj on Fri, 26 Oct 2012 17:07:19 +0000
    @demizer: 3.6 support is available in the master builds, which are stable but not officially released yet. Can't the build be updated to use the master tars?
    https://github.com/zfsonlinux/spl/tarball/master
    https://github.com/zfsonlinux/zfs/tarball/master
    Comment by: demizer on Fri, 26 Oct 2012 17:51:42 +0000
    @vroomanj, I plan on working on the git packages this weekend. All I have to figure out if it is going to be based on an actual git clone or if its just going to be the download links you provided. They are pretty much the same, but i'm not really clear what the Arch Package Guidelines say about this yet. Also, I don't think the current packages in AUR now should be based off of git master. They should be based off of the ZOL stable releases (rc10, rc11, ...). That's why I am making git packages so people can use them if they want to upgrade to the latest kernel and the stable release hasn't been made yet. As is the case currently.
    First Submitted: Sat, 26 Apr 2008 14:34:31 +0000
    spl 0.6.0_rc11-2
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> spl dependencies:
    - linux>=3.5 (already installed)
    - spl-utils>=0.6.0_rc11 (already installed)
    - linux-headers>=3.5 (already installed)
    ==> Edit spl.install ? [Y/n] ("A" to abort)
    ==> ---------------------------------------
    ==> n
    ==> Continue building spl ? [Y/n]
    ==> -----------------------------
    ==>
    ==> Building and installing package
    ==> Making package: spl 0.6.0_rc11-2 (Tue Oct 30 11:34:13 CET 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Downloading spl-0.6.0-rc11.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 178 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    100 136 100 136 0 0 154 0 --:--:-- --:--:-- --:--:-- 293
    100 508k 100 508k 0 0 357k 0 0:00:01 0:00:01 --:--:-- 1245k
    ==> Validating source files with md5sums...
    spl-0.6.0-rc11.tar.gz ... Passed
    ==> Extracting Sources...
    -> Extracting spl-0.6.0-rc11.tar.gz with bsdtar
    ==> Starting build()...
    configure.ac:34: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
    configure.ac:34: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
    checking metadata... yes
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking target system type... i686-pc-linux-gnu
    checking whether to enable maintainer-specific portions of Makefiles... no
    checking whether make supports nested variables... yes
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking for gcc... gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking how to print strings... printf
    checking for a sed that does not truncate output... /bin/sed
    checking for grep that handles long lines and -e... /usr/bin/grep
    checking for egrep... /usr/bin/grep -E
    checking for fgrep... /usr/bin/grep -F
    checking for ld used by gcc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
    checking the name lister (/usr/bin/nm -B) interface... BSD nm
    checking whether ln -s works... yes
    checking the maximum length of command line arguments... 1572864
    checking whether the shell understands some XSI constructs... yes
    checking whether the shell understands "+="... yes
    checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
    checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
    checking for /usr/bin/ld option to reload object files... -r
    checking for objdump... objdump
    checking how to recognize dependent libraries... pass_all
    checking for dlltool... no
    checking how to associate runtime and link libraries... printf %s\n
    checking for ar... ar
    checking for archiver @FILE support... @
    checking for strip... strip
    checking for ranlib... ranlib
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for sysroot... no
    checking for mt... no
    checking if : is a manifest tool... no
    checking how to run the C preprocessor... gcc -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking for dlfcn.h... yes
    checking for objdir... .libs
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC -DPIC
    checking if gcc PIC flag -fPIC -DPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking if gcc supports -c -o file.o... (cached) yes
    checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... yes
    checking spl license... GPL
    checking linux distribution... arch
    checking default package type... arch
    checking whether rpm is available... no
    checking whether rpmbuild is available... no
    checking whether dpkg is available... no
    checking whether dpkg-buildpackage is available... no
    checking whether alien is available... no
    checking whether pacman is available... yes (4.0.3)
    checking whether makepkg is available... yes (4.0.3)
    checking spl config... kernel
    checking kernel source directory... /usr/src/linux-3.6.3-1-ARCH
    checking kernel build directory... /usr/src/linux-3.6.3-1-ARCH
    checking kernel source version... 3.6.3-1-ARCH
    checking kernel file name for module symbols... Module.symvers
    checking whether debugging is enabled... no
    checking whether basic debug logging is enabled... yes
    checking whether basic kmem accounting is enabled... yes
    checking whether detailed kmem tracking is enabled... no
    checking whether modules can be built... yes
    checking whether atomic types use spinlocks... no
    checking whether kernel defines atomic64_t... yes
    checking whether kernel defines atomic64_cmpxchg... no
    checking whether kernel defines atomic64_xchg... yes
    checking whether kernel defines uintptr_t... yes
    checking whether INIT_WORK wants 3 args... no
    checking whether register_sysctl_table() wants 2 args... no
    checking whether set_shrinker() available... no
    checking whether shrinker callback wants 3 args... no
    checking whether struct path used in struct nameidata... yes
    checking whether task_curr() is available... no
    checking whether unnumbered sysctl support exists... no
    checking whether struct ctl_table has ctl_name... no
    checking whether fls64() is available... yes
    checking whether device_create() is available... yes
    checking whether device_create() wants 5 args... yes
    checking whether class_device_create() is available... no
    checking whether set_normalized_timespec() is available as export... yes
    checking whether set_normalized_timespec() is an inline... yes
    checking whether timespec_sub() is available... yes
    checking whether init_utsname() is available... yes
    checking whether header linux/fdtable.h exists... yes
    checking whether files_fdtable() is available... yes
    checking whether __clear_close_on_exec() is available... yes
    checking whether header linux/uaccess.h exists... yes
    checking whether kmalloc_node() is available... yes
    checking whether monotonic_clock() is available... no
    checking whether struct inode has i_mutex... yes
    checking whether struct mutex has owner... yes
    checking whether struct mutex owner is a task_struct... yes
    checking whether mutex_lock_nested() is available... yes
    checking whether on_each_cpu() wants 3 args... yes
    checking whether kallsyms_lookup_name() is available... yes
    checking whether get_vmalloc_info() is available... no
    checking whether symbol *_pgdat exist... yes
    checking whether first_online_pgdat() is available... no
    checking whether next_online_pgdat() is available... no
    checking whether next_zone() is available... no
    checking whether pgdat_list is available... no
    checking whether global_page_state() is available... yes
    checking whether page state NR_FREE_PAGES is available... yes
    checking whether page state NR_INACTIVE is available... no
    checking whether page state NR_INACTIVE_ANON is available... yes
    checking whether page state NR_INACTIVE_FILE is available... yes
    checking whether page state NR_ACTIVE is available... no
    checking whether page state NR_ACTIVE_ANON is available... yes
    checking whether page state NR_ACTIVE_FILE is available... yes
    checking whether symbol get_zone_counts is needed... no
    checking whether user_path_dir() is available... yes
    checking whether set_fs_pwd() is available... no
    checking whether set_fs_pwd() wants 2 args... yes
    checking whether vfs_unlink() wants 2 args... yes
    checking whether vfs_rename() wants 4 args... yes
    checking whether vfs_fsync() is available... yes
    checking whether vfs_fsync() wants 2 args... yes
    checking whether struct fs_struct uses spinlock_t... yes
    checking whether struct cred exists... yes
    checking whether groups_search() is available... no
    checking whether __put_task_struct() is available... yes
    checking whether proc_handler() wants 5 args... yes
    checking whether kvasprintf() is available... yes
    checking whether rwsem_is_locked() acquires sem->wait_lock... no
    checking whether invalidate_inodes() is available... no
    checking whether invalidate_inodes_check() is available... no
    checking whether invalidate_inodes() wants 2 args... yes
    checking whether shrink_dcache_memory() is available... no
    checking whether shrink_icache_memory() is available... no
    checking whether symbol kern_path_parent exists in header... no
    checking whether kern_path_parent() is available... no
    checking whether zlib_deflate_workspacesize() wants 2 args... yes
    checking whether struct shrink_control exists... yes
    checking whether struct rw_semaphore member wait_lock is raw... yes
    checking that generated files are newer than configure... done
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating lib/Makefile
    config.status: creating cmd/Makefile
    config.status: creating module/Makefile
    config.status: creating module/spl/Makefile
    config.status: creating module/splat/Makefile
    config.status: creating include/Makefile
    config.status: creating scripts/Makefile
    config.status: creating spl.spec
    config.status: creating spl-modules.spec
    config.status: creating PKGBUILD-spl
    config.status: creating PKGBUILD-spl-modules
    config.status: creating spl.release
    config.status: creating dkms.conf
    config.status: creating spl_config.h
    config.status: executing depfiles commands
    config.status: executing libtool commands
    make all-recursive
    make[1]: Entering directory `/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11'
    Making all in module
    make[2]: Entering directory `/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module'
    make -C /usr/src/linux-3.6.3-1-ARCH SUBDIRS=`pwd` CONFIG_SPL=m modules
    make[3]: Entering directory `/usr/src/linux-3.6.3-1-ARCH'
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-debug.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-proc.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-kmem.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-thread.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-taskq.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-rwlock.o
    CC [M] /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-vnode.o
    /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-vnode.c: In function 'vn_remove':
    /tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-vnode.c:327:2: error: implicit declaration of function 'path_lookup' [-Werror=implicit-function-declaration]
    cc1: some warnings being treated as errors
    make[5]: *** [/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl/../../module/spl/spl-vnode.o] Error 1
    make[4]: *** [/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module/spl] Error 2
    make[3]: *** [_module_/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module] Error 2
    make[3]: Leaving directory `/usr/src/linux-3.6.3-1-ARCH'
    make[2]: *** [modules] Error 2
    make[2]: Leaving directory `/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11/module'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/tmp/yaourt-tmp-alex/aur-spl/src/spl-0.6.0-rc11'
    make: *** [all] Error 2
    ==> ERROR: A failure occurred in build().
    Aborting...
    ==> ERROR: Makepkg was unable to build spl.
    ==> Restart building spl ? [y/N]
    ==> ----------------------------
    ... i'm stuck here, can anyone help me with this one? please !

    Did you read the comments, either on the AUR page or in the output that you posted? They explain it.

  • How to transfer my archlinux.vdi on an usb external hdd

    Hello everybody from Mauritius ~!
    I am Caron from Mauritius. I run Mint 17 Quiana 64 bit and an Archlinux Vm. My aim is to convert my archlinux vdi into a bootable external hdd ( I use a laptop so I'll be using a laptop external hdd in a usb casing.)
    I read that I had first to convert the .vdi into a .raw and then use dd command. Unfortunately I failed because the commands are not working- unable to find the .vdi on my system. :?
    Can u help please ?
    Thanks in advance.
    Caron
    p.s : I use a Dell Laptop Vostro 1015

    Hi everybody and  sorry for the delay...
    First please note that Mauritius is a former ENGLISH colony till 1968 and is now known as the REPUBLIC of MAURITIUS. I invite you  all to vist it as soon as you can.
    To be more serious, I abandonned the Arch vdi cloning and tried to setup archlinux on an external usb hard drive ( laptop 500 gb hdd in a SATA enclosure ) .
    Arch recognised the disk as /dev/sdc and I did the install twice , having partitionning the hdd before on gparted.
    I think that I am basing my setup process on a virtual box tutorial ( youtube ) but when I reboot the system and choose the option " boot on existing Os  " : nothing happens.
    Is it because the command " vbox echo >> /mnt/hostname " affects the boot sequence . ERROR MESSAGE is " APM not present ".
    It's a pity becase all other distrib such as Kali, Ubuntu and even Cylon install far more quickly and easily on the external usb hdd ?
    Thanks again for your time, patience and support
    Caron

  • Any plan to include the mate desktop in Archlinux

    Are there any plan to include the Mate desktop in Archlinux?
    I have installed Linux for my mother that was used to Windows XP. My aim was to configure a desktop that was as close as possible as Windows XP. I have chosen Xfce (after a little reconfiguration of the desktop: make one single panel at the bottom of the screen, install network-manager and reconfigure a few things here and there). I was convinced nevertheless that Mate should have done in theory a better job. But this necessitates to include an entire third party repository and I would like to stay with something that is Arch supported. I think Mate become more and more popular and have contributed to the rise of Mint Linux vs Ubuntu. Up to know every widely used software was available in the Arch repository. The AUR was only needed for a few mostly standalone software that do not make part of the system; but if Arch misses Mate, this would maybe not be the case in the future anymore.
    Last edited by olive (2013-02-03 09:34:16)

    I believe mate-desktop and the related packages on AUR is quite well enough as a resource.
    But on another note, i did myself set up a arch-linux box for my mother.
    What i did though was to create an openbox enviroment, with just a simple menu bar at the bottom.
    It has 3 desktops, and it autostarts firefox (with her usual pages on the bookmark-bar)
    and py-solitaire fullscreen on desktop 1 and 2.
    I then have taught her to just switch between desk 1 and 2
    - thus ranging in the only activites she tends to do on her computer.
    It is dead simple really, and it has lessen my need of support by 96%.
    The beauty is that there is no buttons or icons for her to press
    (the four percent only being when someone convinces her that she must be able to do whatever her aquantances does on their winbox at home)
    I am at ease with this.
    Last edited by PReP (2013-02-03 10:00:55)

  • ArchLinux causes the router to restart

    Hello!
    I don't know what exactly, but something causes the router to disconnects and restarts. And dhcpcd fails after reboot.
    I'm having this problem since some iso releases. Like 5 or 6 months ago.
    Well, I download the ISO, I dd it to a memory stick, and boot a PC with it. Everything goes fine, I do whatever I want. But after a while the router loses Internet connection and it does not accept any device to connect. Then, I reboot the PC, and dhcpcd@<whatever>fails. It doesn't matter if it's a wireless or wired connection. To get a connection, I restart the router (turn it off and on). But the router continuously restarts itself if I continue using the ArchLinux machines.
    (To get the router working again, I disconnect any ArchLinux running machine and restart the router)
    Because of that I thought it was the router, but I tried with other router (at another place) with my laptop, and I got the same result. The router restarts and everything. So I thought It was my laptop. I tried with another computer (a desktop) and I got the same result. Then I said "Maybe it's the memory stick", so I tried with other one... the same result. To be sure of that, I used other distro (LMDE) on those PC's with the same memory stick and different routers. Everything worked fine.
    I've searched this issue on the forum and the Bug Tracker, but I don't find this exact problem. Or maybe I didn't get it because of my English. If this post is duplicated, or it's submitted on the bug tracker, I apologize and will be thankful for someone to redirects me. If is not, here are the PCs' specs and command outputs: (all using 2014.02.01 installation media)
    If other command output (or output filtering) is necesary, please let me know.
    Laptop:
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
    03:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
    dmesg before reboot
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077b6bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000077bbf000-0x0000000077c85fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077c86000-0x0000000077cbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000077cbf000-0x0000000077cebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077cec000-0x0000000077cfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000077cff000-0x0000000077cfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077d00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x77d00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-CFFFF uncachable
    [ 0.000000] D0000-DFFFF write-protect
    [ 0.000000] E0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
    [ 0.000000] 1 base 000000000 mask FC0000000 write-back
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 078000000 mask FF8000000 uncachable
    [ 0.000000] 4 base 077E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 base 077D00000 mask FFFF00000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x76600000-0x767fffff]
    [ 0.000000] [mem 0x76600000-0x767fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x74000000-0x765fffff]
    [ 0.000000] [mem 0x74000000-0x765fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x73ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x76800000-0x77b6bfff]
    [ 0.000000] [mem 0x76800000-0x779fffff] page 2M
    [ 0.000000] [mem 0x77a00000-0x77b6bfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x77bbf000-0x77c85fff]
    [ 0.000000] [mem 0x77bbf000-0x77c85fff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x77cbf000-0x77cebfff]
    [ 0.000000] [mem 0x77cbf000-0x77cebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x77cff000-0x77cfffff]
    [ 0.000000] [mem 0x77cff000-0x77cfffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x768ab000-0x77b6bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV)
    [ 0.000000] ACPI: XSDT 0000000077cfe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000077cfd000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 0000000077cef000 09476 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 0000000077c93000 00040
    [ 0.000000] ACPI: HPET 0000000077cfc000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 0000000077cfb000 0006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 0000000077cfa000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 0000000077cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 0000000077cee000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: BOOT 0000000077ced000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 0000000077cec000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000077cfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x77cfffff]
    [ 0.000000] NODE_DATA [mem 0x77ce7000-0x77cebfff]
    [ 0.000000] [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880074200000-ffff880075ffffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x77b6bfff]
    [ 0.000000] node 0: [mem 0x77bbf000-0x77c85fff]
    [ 0.000000] node 0: [mem 0x77cbf000-0x77cebfff]
    [ 0.000000] node 0: [mem 0x77cff000-0x77cfffff]
    [ 0.000000] On node 0 totalpages: 490494
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7604 pages used for memmap
    [ 0.000000] DMA32 zone: 486497 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x77b6c000-0x77bbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x77c86000-0x77cbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x77cec000-0x77cfefff]
    [ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880076600000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 482805
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 1899744K/1961976K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 62232K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 7864320 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2161.512 MHz processor
    [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4324.15 BogoMIPS (lpj=7205040)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003387] Security Framework initialized
    [ 0.003404] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003405] Yama: becoming mindful.
    [ 0.003633] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.007774] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008450] Mount-cache hash table entries: 256
    [ 0.008831] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008866] Initializing cgroup subsys freezer
    [ 0.008869] Initializing cgroup subsys net_cls
    [ 0.008872] Initializing cgroup subsys blkio
    [ 0.008904] CPU: Physical Processor ID: 0
    [ 0.008906] CPU: Processor Core ID: 0
    [ 0.008909] mce: CPU supports 6 MCE banks
    [ 0.008919] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008930] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009038] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.010444] ACPI: Core revision 20130725
    [ 0.010448] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.010570] ACPI: Forced DSDT copy: length 0x09476 copied locally, original unmapped
    [ 0.016698] ACPI: All ACPI Tables successfully acquired
    [ 0.020011] ftrace: allocating 20320 entries in 80 pages
    [ 0.027216] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.062785] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063333] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.063333] ... version: 2
    [ 0.063333] ... bit width: 40
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 000000ffffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 3
    [ 0.063333] ... event mask: 0000000700000003
    [ 0.083419] smpboot: Booting Node 0, Processors # 1 OK
    [ 0.096694] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.096710] Brought up 2 CPUs
    [ 0.096713] smpboot: Total of 2 processors activated (8649.30 BogoMIPS)
    [ 0.097667] devtmpfs: initialized
    [ 0.105993] PM: Registering ACPI NVS region [mem 0x77c86000-0x77cbefff] (233472 bytes)
    [ 0.107250] RTC time: 4:00:36, date: 02/03/14
    [ 0.107320] NET: Registered protocol family 16
    [ 0.107477] cpuidle: using governor ladder
    [ 0.107479] cpuidle: using governor menu
    [ 0.107515] ACPI: bus type PCI registered
    [ 0.107518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.107601] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.107605] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.114576] PCI: Using configuration type 1 for base access
    [ 0.115274] bio: create slab <bio-0> at 0
    [ 0.115274] ACPI: Added _OSI(Module Device)
    [ 0.115274] ACPI: Added _OSI(Processor Device)
    [ 0.115274] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.115274] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117503] ACPI: EC: Look up EC in DSDT
    [ 0.119480] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.120679] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.121126] ACPI: SSDT 0000000077b77c18 0026B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.121590] ACPI: Dynamic OEM Table Load:
    [ 0.121593] ACPI: SSDT (null) 0026B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.121748] ACPI: SSDT 0000000077b75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.122196] ACPI: Dynamic OEM Table Load:
    [ 0.122199] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.136848] ACPI: SSDT 0000000077b76e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.137328] ACPI: Dynamic OEM Table Load:
    [ 0.137331] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.143461] ACPI: SSDT 0000000077b77f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.143925] ACPI: Dynamic OEM Table Load:
    [ 0.143928] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.156692] ACPI: EC: GPE storm detected(70 GPEs), transactions will use polling mode
    [ 0.273795] ACPI: Interpreter enabled
    [ 0.273805] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.273813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.273838] ACPI: (supports S0 S3 S4 S5)
    [ 0.273840] ACPI: Using IOAPIC for interrupt routing
    [ 0.273881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.274057] ACPI: No dock devices found.
    [ 0.284145] ACPI: Power Resource [FN00] (on)
    [ 0.285271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.285278] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.285281] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.285843] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.286045] PCI host bridge to bus 0000:00
    [ 0.286049] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.286052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.286054] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.286057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.286059] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.286071] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
    [ 0.286099] DMAR: Forcing write-buffer flush capability
    [ 0.286100] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.286195] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
    [ 0.286213] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.286223] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.286230] pci 0000:00:02.0: reg 0x20: [io 0x5110-0x5117]
    [ 0.286336] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
    [ 0.286350] pci 0000:00:02.1: reg 0x10: [mem 0x93500000-0x935fffff 64bit]
    [ 0.286515] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.286603] pci 0000:00:1a.0: reg 0x20: [io 0x50e0-0x50ff]
    [ 0.286768] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.286856] pci 0000:00:1a.1: reg 0x20: [io 0x50c0-0x50df]
    [ 0.287026] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.287058] pci 0000:00:1a.7: reg 0x10: [mem 0x96705c00-0x96705fff]
    [ 0.287192] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.287295] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.287316] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit]
    [ 0.287420] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.287480] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.287527] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.287633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.287692] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.287743] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
    [ 0.287841] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.287903] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.287954] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
    [ 0.288048] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.288104] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.288160] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.288245] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf]
    [ 0.288393] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.288445] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.288532] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f]
    [ 0.288673] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.288722] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.288803] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f]
    [ 0.288966] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
    [ 0.289053] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f]
    [ 0.289225] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.289256] pci 0000:00:1d.7: reg 0x10: [mem 0x96705800-0x96705bff]
    [ 0.289388] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.289461] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.289510] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.289629] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.289680] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
    [ 0.289899] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
    [ 0.289929] pci 0000:00:1f.2: reg 0x10: [io 0x5108-0x510f]
    [ 0.289942] pci 0000:00:1f.2: reg 0x14: [io 0x511c-0x511f]
    [ 0.289953] pci 0000:00:1f.2: reg 0x18: [io 0x5100-0x5107]
    [ 0.289965] pci 0000:00:1f.2: reg 0x1c: [io 0x5118-0x511b]
    [ 0.289975] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 0.289987] pci 0000:00:1f.2: reg 0x24: [mem 0x96705000-0x967057ff]
    [ 0.290061] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.290156] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.290180] pci 0000:00:1f.3: reg 0x10: [mem 0x96706000-0x967060ff 64bit]
    [ 0.290212] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 0.290471] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.290535] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
    [ 0.290644] pci 0000:02:00.0: reg 0x18: [mem 0x90410000-0x90410fff 64bit pref]
    [ 0.290713] pci 0000:02:00.0: reg 0x20: [mem 0x90400000-0x9040ffff 64bit pref]
    [ 0.291017] pci 0000:02:00.0: unsupported PM cap regs version (7)
    [ 0.291241] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.291246] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
    [ 0.291252] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
    [ 0.291260] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x914fffff 64bit pref]
    [ 0.291374] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
    [ 0.291406] pci 0000:03:00.0: reg 0x10: [mem 0x94600000-0x9460ffff 64bit]
    [ 0.291630] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.291643] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.291648] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 0.291654] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
    [ 0.291661] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x924fffff 64bit pref]
    [ 0.291764] acpiphp: Slot [1] registered
    [ 0.291771] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
    [ 0.291777] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
    [ 0.291782] pci 0000:00:1c.4: bridge window [mem 0x93600000-0x945fffff]
    [ 0.291790] pci 0000:00:1c.4: bridge window [mem 0x92500000-0x934fffff 64bit pref]
    [ 0.291902] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 0.291916] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.291919] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.291921] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.291924] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.292142] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
    [ 0.292216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.292289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.292360] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.292431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.292503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.292574] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.292644] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.293398] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.293413] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.293477] Found 1 acpi root devices
    [ 0.293538] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.293662] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.293662] vgaarb: loaded
    [ 0.293662] vgaarb: bridge control possible 0000:00:02.0
    [ 0.293662] PCI: Using ACPI for IRQ routing
    [ 0.295666] PCI: pci_cache_line_size set to 64 bytes
    [ 0.295756] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
    [ 0.295762] e820: reserve RAM buffer [mem 0x77b6c000-0x77ffffff]
    [ 0.295764] e820: reserve RAM buffer [mem 0x77c86000-0x77ffffff]
    [ 0.295766] e820: reserve RAM buffer [mem 0x77cec000-0x77ffffff]
    [ 0.295768] e820: reserve RAM buffer [mem 0x77d00000-0x77ffffff]
    [ 0.295898] NetLabel: Initializing
    [ 0.295900] NetLabel: domain hash size = 128
    [ 0.295901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.295917] NetLabel: unlabeled traffic allowed by default
    [ 0.295944] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.295949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.295954] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.297695] Switched to clocksource hpet
    [ 0.304063] pnp: PnP ACPI init
    [ 0.304092] ACPI: bus type PNP registered
    [ 0.304555] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
    [ 0.304628] system 00:00: [io 0x0800-0x080f] has been reserved
    [ 0.304631] system 00:00: [io 0x0810-0x0817] has been reserved
    [ 0.304634] system 00:00: [io 0x0820-0x0823] has been reserved
    [ 0.304637] system 00:00: [io 0x0400-0x047f] could not be reserved
    [ 0.304639] system 00:00: [io 0x0500-0x057f] has been reserved
    [ 0.304642] system 00:00: [io 0x0580-0x05ff] has been reserved
    [ 0.304645] system 00:00: [io 0x0600-0x0627] has been reserved
    [ 0.304649] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.304651] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.304654] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.304657] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.304660] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.304662] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.304665] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.304668] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.304671] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved
    [ 0.304676] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.304687] pnp 00:01: [dma 4]
    [ 0.304718] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.304765] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.304873] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.304912] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.304963] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.305021] pnp 00:06: Plug and Play ACPI device, IDs SYN1913 SYN1900 SYN0002 PNP0f13 (active)
    [ 0.305172] pnp: PnP ACPI: found 7 devices
    [ 0.305174] ACPI: bus type PNP unregistered
    [ 0.312417] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.312423] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
    [ 0.312430] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
    [ 0.312436] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x914fffff 64bit pref]
    [ 0.312444] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.312448] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 0.312455] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
    [ 0.312460] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x924fffff 64bit pref]
    [ 0.312468] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
    [ 0.312472] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
    [ 0.312478] pci 0000:00:1c.4: bridge window [mem 0x93600000-0x945fffff]
    [ 0.312484] pci 0000:00:1c.4: bridge window [mem 0x92500000-0x934fffff 64bit pref]
    [ 0.312492] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 0.312507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.312510] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.312512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.312515] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.312517] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
    [ 0.312520] pci_bus 0000:02: resource 1 [mem 0x95700000-0x966fffff]
    [ 0.312522] pci_bus 0000:02: resource 2 [mem 0x90400000-0x914fffff 64bit pref]
    [ 0.312525] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.312527] pci_bus 0000:03: resource 1 [mem 0x94600000-0x956fffff]
    [ 0.312529] pci_bus 0000:03: resource 2 [mem 0x91500000-0x924fffff 64bit pref]
    [ 0.312532] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.312534] pci_bus 0000:06: resource 1 [mem 0x93600000-0x945fffff]
    [ 0.312537] pci_bus 0000:06: resource 2 [mem 0x92500000-0x934fffff 64bit pref]
    [ 0.312539] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.312541] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.312544] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.312546] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.312593] NET: Registered protocol family 2
    [ 0.312808] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.312953] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.313069] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.313132] TCP: reno registered
    [ 0.313145] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.313165] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.313290] NET: Registered protocol family 1
    [ 0.313313] pci 0000:00:02.0: Boot video device
    [ 1.646685] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 2.980019] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 2.980295] PCI: CLS 64 bytes, default 64
    [ 2.980359] Unpacking initramfs...
    [ 5.721347] Freeing initrd memory: 19204K (ffff8800768ab000 - ffff880077b6c000)
    [ 5.721400] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    [ 5.721402] Simple Boot Flag at 0x44 set to 0x1
    [ 5.721585] Scanning for low memory corruption every 60 seconds
    [ 5.722005] audit: initializing netlink socket (disabled)
    [ 5.722025] type=2000 audit(1391400041.719:1): initialized
    [ 5.736232] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 5.737874] zbud: loaded
    [ 5.738072] VFS: Disk quotas dquot_6.5.2
    [ 5.738126] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 5.738361] msgmni has been set to 3747
    [ 5.738724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 5.738771] io scheduler noop registered
    [ 5.738774] io scheduler deadline registered
    [ 5.738810] io scheduler cfq registered (default)
    [ 5.739136] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 5.739386] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 5.739471] pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
    [ 5.739639] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    [ 5.739740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 5.739759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 5.739822] intel_idle: does not run on family 6 model 15
    [ 5.739881] GHES: HEST is not enabled!
    [ 5.739965] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 5.740521] Linux agpgart interface v0.103
    [ 5.740604] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 5.770209] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 5.770256] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 5.770379] mousedev: PS/2 mouse device common for all mice
    [ 5.771302] rtc_cmos 00:02: RTC can wake from S4
    [ 5.771474] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 5.771510] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 5.771618] drop_monitor: Initializing network drop monitor service
    [ 5.771701] TCP: cubic registered
    [ 5.771814] NET: Registered protocol family 10
    [ 5.772033] NET: Registered protocol family 17
    [ 5.772044] Key type dns_resolver registered
    [ 5.772322] registered taskstats version 1
    [ 5.772977] Magic number: 2:581:8
    [ 5.773090] rtc_cmos 00:02: setting system clock to 2014-02-03 04:00:42 UTC (1391400042)
    [ 5.773157] PM: Hibernation image not present or could not be loaded.
    [ 5.774695] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 5.774702] Write protecting the kernel read-only data: 8192k
    [ 5.778338] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
    [ 5.779789] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 5.791935] systemd-udevd[47]: starting version 208
    [ 5.804285] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 5.817811] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 5.817819] ACPI: Power Button [PWRB]
    [ 5.817913] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 5.819923] ACPI: Lid Switch [LID0]
    [ 5.820087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.820094] ACPI: Power Button [PWRF]
    [ 5.835548] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.835668] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.836407] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
    [ 5.836578] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 5.838170] [drm] Initialized drm 1.1.0 20060810
    [ 5.843237] ACPI: bus type USB registered
    [ 5.843284] usbcore: registered new interface driver usbfs
    [ 5.844901] usbcore: registered new interface driver hub
    [ 5.845043] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 5.845062] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.845440] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 5.845619] usbcore: registered new device driver usb
    [ 5.845978] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000031e000, 00:1e:33:77:17:ff, XID 14a00000 IRQ 43
    [ 5.846922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.847211] ehci-pci: EHCI PCI platform driver
    [ 5.847429] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.847465] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 5.847486] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 5.847496] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 5.847518] ehci-pci 0000:00:1a.7: debug port 1
    [ 5.851133] SCSI subsystem initialized
    [ 5.851435] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 5.851477] ehci-pci 0000:00:1a.7: irq 19, io mem 0x96705c00
    [ 5.858037] libata version 3.00 loaded.
    [ 5.860105] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 5.860401] hub 1-0:1.0: USB hub found
    [ 5.860413] hub 1-0:1.0: 4 ports detected
    [ 5.860881] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 5.860886] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 5.860894] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
    [ 5.860941] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
    [ 5.861165] hub 2-0:1.0: USB hub found
    [ 5.861176] hub 2-0:1.0: 2 ports detected
    [ 5.861502] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 5.861506] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 5.861514] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
    [ 5.861559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
    [ 5.861761] hub 3-0:1.0: USB hub found
    [ 5.861770] hub 3-0:1.0: 2 ports detected
    [ 5.862094] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 5.862099] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 5.862110] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 5.862173] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
    [ 5.862518] hub 4-0:1.0: USB hub found
    [ 5.862536] hub 4-0:1.0: 2 ports detected
    [ 5.862938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 5.862944] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 5.862956] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 5.862991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
    [ 5.863221] hub 5-0:1.0: USB hub found
    [ 5.863232] hub 5-0:1.0: 2 ports detected
    [ 5.863599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 5.863604] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 5.863611] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 5.863651] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
    [ 5.863869] hub 6-0:1.0: USB hub found
    [ 5.863885] hub 6-0:1.0: 2 ports detected
    [ 5.864240] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 5.864245] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 5.864252] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
    [ 5.864300] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
    [ 5.864816] hub 7-0:1.0: USB hub found
    [ 5.864830] hub 7-0:1.0: 2 ports detected
    [ 5.865511] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 5.866246] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 5.866256] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
    [ 5.866276] ehci-pci 0000:00:1d.7: debug port 1
    [ 5.870291] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 5.870307] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96705800
    [ 5.880033] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 5.880639] hub 8-0:1.0: USB hub found
    [ 5.880654] hub 8-0:1.0: 8 ports detected
    [ 5.903435] hub 4-0:1.0: USB hub found
    [ 5.903449] hub 4-0:1.0: 2 ports detected
    [ 5.926760] hub 5-0:1.0: USB hub found
    [ 5.926773] hub 5-0:1.0: 2 ports detected
    [ 5.950089] hub 6-0:1.0: USB hub found
    [ 5.950105] hub 6-0:1.0: 2 ports detected
    [ 5.973422] hub 7-0:1.0: USB hub found
    [ 5.973436] hub 7-0:1.0: 2 ports detected
    [ 5.973567] ahci 0000:00:1f.2: version 3.0
    [ 5.973836] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 5.973962] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 5.973966] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
    [ 5.973973] ahci 0000:00:1f.2: setting latency timer to 64
    [ 5.994153] scsi0 : ahci
    [ 5.994272] scsi1 : ahci
    [ 5.994364] scsi2 : ahci
    [ 5.994481] scsi3 : ahci
    [ 5.994574] scsi4 : ahci
    [ 5.994649] scsi5 : ahci
    [ 5.994712] ata1: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705100 irq 44
    [ 5.994715] ata2: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705180 irq 44
    [ 5.994718] ata3: DUMMY
    [ 5.994719] ata4: DUMMY
    [ 5.994722] ata5: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705300 irq 44
    [ 5.994726] ata6: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705380 irq 44
    [ 5.995447] [drm] Memory usable by graphics device = 2048M
    [ 5.995460] i915 0000:00:02.0: setting latency timer to 64
    [ 6.031720] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [ 6.031732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.031734] [drm] Driver supports precise vblank timestamp query.
    [ 6.031800] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.166711] usb 1-2: new high-speed USB device number 2 using ehci-pci
    [ 6.292176] fbcon: inteldrmfb (fb0) is primary device
    [ 6.313402] ata2: SATA link down (SStatus 0 SControl 300)
    [ 6.323381] ata5: SATA link down (SStatus 0 SControl 300)
    [ 6.333408] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
    [ 6.333409] ------------[ cut here ]------------
    [ 6.333447] WARNING: CPU: 0 PID: 50 at drivers/gpu/drm/i915/intel_display.c:8853 check_crtc_state+0x61f/0xb10 [i915]()
    [ 6.333447] pipe state doesn't match!
    [ 6.333459] Modules linked in: ahci libahci libata scsi_mod uhci_hcd ehci_pci i915(+) ehci_hcd r8169 mii usbcore usb_common i2c_algo_bit drm_kms_helper drm intel_agp i2c_core intel_gtt video button
    [ 6.333462] CPU: 0 PID: 50 Comm: systemd-udevd Not tainted 3.12.9-2-ARCH #1
    [ 6.333463] Hardware name: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
    [ 6.333467] 0000000000000009 ffff880072a45188 ffffffff814ed0d3 ffff880072a451d0
    [ 6.333469] ffff880072a451c0 ffffffff81062aed ffff8800737eb000 ffff8800737eb6d8
    [ 6.333471] ffff880072ee4c40 ffff880072ee4800 ffff880072ee4c48 ffff880072a45220
    [ 6.333471] Call Trace:
    [ 6.333478] [<ffffffff814ed0d3>] dump_stack+0x54/0x8d
    [ 6.333482] [<ffffffff81062aed>] warn_slowpath_common+0x7d/0xa0
    [ 6.333484] [<ffffffff81062b5c>] warn_slowpath_fmt+0x4c/0x50
    [ 6.333504] [<ffffffffa00c052f>] check_crtc_state+0x61f/0xb10 [i915]
    [ 6.333527] [<ffffffffa00cbdf3>] intel_modeset_check_state+0x2c3/0x780 [i915]
    [ 6.333547] [<ffffffffa00cc345>] intel_set_mode+0x25/0x30 [i915]
    [ 6.333568] [<ffffffffa00ccc33>] intel_crtc_set_config+0x7e3/0x9d0 [i915]
    [ 6.333578] [<ffffffffa003b50d>] drm_mode_set_config_internal+0x5d/0xe0 [drm]
    [ 6.333581] [<ffffffffa0084671>] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper]
    [ 6.333584] [<ffffffff812f9454>] fbcon_init+0x4f4/0x570
    [ 6.333588] [<ffffffff81363888>] visual_init+0xb8/0x120
    [ 6.333590] [<ffffffff81365e53>] do_bind_con_driver+0x163/0x380
    [ 6.333592] [<ffffffff81366654>] do_take_over_console+0x114/0x1c0
    [ 6.333594] [<ffffffff812f9533>] do_fbcon_takeover+0x63/0xd0
    [ 6.333597] [<ffffffff812fdc4d>] fbcon_event_notify+0x60d/0x720
    [ 6.333599] [<ffffffff814f7d6c>] notifier_call_chain+0x4c/0x70
    [ 6.333603] [<ffffffff8108a8bd>] __blocking_notifier_call_chain+0x4d/0x70
    [ 6.333605] [<ffffffff8108a8f6>] blocking_notifier_call_chain+0x16/0x20
    [ 6.333608] [<ffffffff812ed94b>] fb_notifier_call_chain+0x1b/0x20
    [ 6.333610] [<ffffffff812ef93b>] register_framebuffer+0x1db/0x310
    [ 6.333613] [<ffffffffa008441f>] drm_fb_helper_initial_config+0x32f/0x510 [drm_kms_helper]
    [ 6.333616] [<ffffffff811893d7>] ? kmem_cache_alloc_trace+0x257/0x280
    [ 6.333618] [<ffffffffa00828a9>] ? drm_fb_helper_init+0x179/0x210 [drm_kms_helper]
    [ 6.333642] [<ffffffffa00ef6f1>] intel_fbdev_initial_config+0x21/0x30 [i915]
    [ 6.333660] [<ffffffffa0096307>] i915_driver_load+0xf27/0xf50 [i915]
    [ 6.333669] [<ffffffffa0036f99>] drm_get_pci_dev+0x129/0x2f0 [drm]
    [ 6.333686] [<ffffffffa009265c>] i915_pci_probe+0x2c/0x70 [i915]
    [ 6.333690] [<ffffffff812c4bee>] local_pci_probe+0x3e/0x70
    [ 6.333692] [<ffffffff812c4df1>] pci_device_probe+0x121/0x130
    [ 6.333696] [<ffffffff81389be7>] driver_probe_device+0x87/0x3a0
    [ 6.333698] [<ffffffff81389fd3>] __driver_attach+0x93/0xa0
    [ 6.333700] [<ffffffff81389f40>] ? __device_attach+0x40/0x40
    [ 6.333702] [<ffffffff81387a83>] bus_for_each_dev+0x63/0xa0
    [ 6.333704] [<ffffffff8138963e>] driver_attach+0x1e/0x20
    [ 6.333706] [<ffffffff813891b0>] bus_add_driver+0x200/0x2d0
    [ 6.333708] [<ffffffffa0134000>] ? 0xffffffffa0133fff
    [ 6.333710] [<ffffffff8138a654>] driver_register+0x64/0xf0
    [ 6.333712] [<ffffffffa0134000>] ? 0xffffffffa0133fff
    [ 6.333714] [<ffffffff812c4a5b>] __pci_register_driver+0x4b/0x50
    [ 6.333719] [<ffffffffa003727a>] drm_pci_init+0x11a/0x130 [drm]
    [ 6.333722] [<ffffffff814f0e1e>] ? mutex_unlock+0xe/0x10
    [ 6.333724] [<ffffffffa0134000>] ? 0xffffffffa0133fff
    [ 6.333739] [<ffffffffa0134066>] i915_init+0x66/0x68 [i915]
    [ 6.333742] [<ffffffff810020f2>] do_one_initcall+0xf2/0x1a0
    [ 6.333745] [<ffffffff8108a8c8>] ? __blocking_notifier_call_chain+0x58/0x70
    [ 6.333747] [<ffffffff810d2f46>] load_module+0x1b76/0x2620
    [ 6.333750] [<ffffffff810cf8f0>] ? store_uevent+0x40/0x40
    [ 6.333753] [<ffffffff810d3b66>] SyS_finit_module+0x86/0xb0
    [ 6.333756] [<ffffffff814fbbed>] system_call_fastpath+0x1a/0x1f
    [ 6.333757] ---[ end trace 9a79094c20842610 ]---
    [ 6.356434] Console: switching to colour frame buffer device 160x50
    [ 6.359569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.359571] i915 0000:00:02.0: registered panic notifier
    [ 6.367896] acpi device:03: registered as cooling_device0
    [ 6.367995] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 6.368062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 6.368551] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.436706] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 6.480036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 6.490054] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 6.503918] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100
    [ 6.517114] ata6.00: configured for UDMA/100
    [ 6.546779] ata1.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100
    [ 6.546783] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 6.547690] ata1.00: configured for UDMA/100
    [ 6.547852] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5
    [ 6.551525] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A TO01 PQ: 0 ANSI: 5
    [ 6.555197] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 6.555272] sd 0:0:0:0: [sda] Write Protect is off
    [ 6.555276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 6.555307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.563105] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.563110] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.563322] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [ 6.577056] usbcore: registered new interface driver usb-storage
    [ 6.577480] ums-realtek 1-4:1.0: USB Mass Storage device detected
    [ 6.579940] scsi6 : usb-storage 1-4:1.0
    [ 6.580072] usbcore: registered new interface driver ums-realtek
    [ 6.619760] sda: sda1 sda2 sda3
    [ 6.620283] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 6.680046] usb 8-1: new high-speed USB device number 2 using ehci-pci
    [ 6.723358] tsc: Refined TSC clocksource calibration: 2161.486 MHz
    [ 6.806287] usb-storage 8-1:1.0: USB Mass Storage device detected
    [ 6.806430] scsi7 : usb-storage 8-1:1.0
    [ 7.296719] usb 5-1: new full-speed USB device number 2 using uhci_hcd
    [ 7.585680] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    [ 7.589928] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 7.723410] Switched to clocksource tsc
    [ 7.807500] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
    [ 7.808757] sd 7:0:0:0: [sdc] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
    [ 7.809360] sd 7:0:0:0: [sdc] Write Protect is off
    [ 7.809365] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 7.809984] sd 7:0:0:0: [sdc] No Caching mode page found
    [ 7.810038] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 7.812983] sd 7:0:0:0: [sdc] No Caching mode page found
    [ 7.813024] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 7.813741] sdc: sdc1 sdc2
    [ 8.039236] sd 7:0:0:0: [sdc] No Caching mode page found
    [ 8.039277] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 8.039312] sd 7:0:0:0: [sdc] Attached SCSI removable disk
    [ 8.669981] ISO 9660 Extensions: RRIP_1991A
    [ 8.688130] loop: module loaded
    [ 8.859911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 8.879202] device-mapper: uevent: version 1.0.3
    [ 8.879357] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
    [ 8.885173] bio: create slab <bio-1> at 1
    [ 8.904551] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
    [ 9.437289] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 9.443163] systemd[1]: Set hostname to <archiso>.
    [ 9.534674] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 9.534770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 9.534791] systemd[1]: Starting Remote File Systems.
    [ 9.534951] systemd[1]: Reached target Remote File Systems.
    [ 9.534964] systemd[1]: Starting Root Slice.
    [ 9.535275] systemd[1]: Created slice Root Slice.
    [ 9.535290] systemd[1]: Starting User and Session Slice.
    [ 9.535500] systemd[1]: Created slice User and Session Slice.
    [ 9.535513] systemd[1]: Starting System Slice.
    [ 9.535692] systemd[1]: Created slice System Slice.
    [ 9.535707] systemd[1]: Starting system-getty.slice.
    [ 9.535910] systemd[1]: Created slice system-getty.slice.
    [ 9.535923] systemd[1]: Starting Slices.
    [ 9.536023] systemd[1]: Reached target Slices.
    [ 9.536037] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 9.536189] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 9.536202] systemd[1]: Starting Delayed Shutdown Socket.
    [ 9.536339] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 9.536351] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 9.536482] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 9.536494] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 9.536624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 9.536636] systemd[1]: Starting Encrypted Volumes.
    [ 9.538052] systemd[1]: Reached target Encrypted Volumes.
    [ 9.538104] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 9.539690] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 9.539712] systemd[1]: Starting Journal Socket.
    [ 9.541224] systemd[1]: Listening on Journal Socket.
    [ 9.541413] systemd[1]: Starting Apply Kernel Variables...
    [ 9.548274] systemd[1]: Starting Load Kernel Modules...
    [ 9.551238] systemd[1]: Mounting POSIX Message Queue File System...
    [ 9.554809] systemd[1]: Mounting Huge Pages File System...
    [ 9.557044] systemd[1]: Starting Journal Service...
    [ 9.561210] systemd[1]: Started Journal Service.
    [ 9.853230] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 9.894466] FS-Cache: Loaded
    [ 9.955808] RPC: Registered named UNIX socket transport module.
    [ 9.955814] RPC: Registered udp transport module.
    [ 9.955816] RPC: Registered tcp transport module.
    [ 9.955817] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 10.085173] FS-Cache: Netfs 'nfs' registered for caching
    [ 10.142900] systemd-udevd[187]: starting version 208
    [ 10.197123] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 10.673822] ACPI: Requesting acpi_cpufreq
    [ 10.688878] Monitor-Mwait will be used to enter C-1 state
    [ 10.688891] Monitor-Mwait will be used to enter C-2 state
    [ 10.688896] tsc: Marking TSC unstable due to TSC halts in idle
    [ 10.688941] ACPI: acpi_idle registered with cpuidle
    [ 10.689683] Switched to clocksource hpet
    [ 10.787812] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.828742] ACPI: AC Adapter [ADP0] (on-line)
    [ 10.858236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 10.977996] ACPI: Fan [FAN] (on)
    [ 11.027394] thermal LNXTHERM:00: registered as thermal_zone0
    [ 11.027399] ACPI: Thermal Zone [THRM] (38 C)
    [ 11.084350] wmi: Mapper loaded
    [ 11.250190] systemd-udevd[200]: renamed network interface eth0 to enp2s0
    [ 11.269021] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130725/utaddress-251)
    [ 11.269032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 11.269036] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 11.269040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 11.269042] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 11.269046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 11.269048] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 11.271170] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
    [ 11.271744] input: Toshiba input device as /devices/virtual/input/input6
    [ 11.303900] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 11.488116] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 11.502556] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 11.504790] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 11.508418] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 11.607189] media: Linux media interface: v0.10
    [ 11.614358] cfg80211: Calling CRDA to update world regulatory domain
    [ 11.664492] r8169 0000:02:00.0 enp2s0: link down
    [ 11.664527] r8169 0000:02:00.0 enp2s0: link down
    [ 11.664542] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 11.827588] input: PC Speaker as /devices/platform/pcspkr/input/input10
    [ 11.845447] Linux video capture interface: v2.00
    [ 11.887623] Bluetooth: Core ver 2.16
    [ 11.887653] NET: Registered protocol family 31
    [ 11.887655] Bluetooth: HCI device and connection manager initialized
    [ 11.887666] Bluetooth: HCI socket layer initialized
    [ 11.887669] Bluetooth: L2CAP socket layer initialized
    [ 11.887676] Bluetooth: SCO socket layer initialized
    [ 11.927341] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
    [ 12.008018] usbcore: registered new interface driver btusb
    [ 12.071971] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
    [ 12.073621] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 12.138239] iTCO_vendor_support: vendor-support=0
    [ 12.212116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 12.212164] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    [ 12.212290] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 12.226526] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 12.227023] ath5k 0000:03:00.0: registered as 'phy0'
    [ 12.371710] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
    [ 12.388446] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
    [ 12.388694] usbcore: registered new interface driver uvcvideo
    [ 12.388697] USB Video Class driver (1.1.1)
    [ 12.443999] cfg80211: World regulatory domain updated:
    [ 12.444008] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.444011] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.444014] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.444016] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 12.444018] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 12.444021] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 12.444023] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 12.888755] ath: EEPROM regdomain: 0x65
    [ 12.888760] ath: EEPROM indicates we should expect a direct regpair map
    [ 12.888764] ath: Country alpha2 being used: 00
    [ 12.888766] ath: Regpair used: 0x65
    [ 12.938969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 12.939468] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    [ 12.970186] systemd-udevd[200]: renamed network interface wlan0 to wlp3s0
    [ 13.098892] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa04000/0x20000, board id: 3655, fw id: 515625
    [ 13.098900] psmouse serio1: synaptics: Toshiba Satellite L305 detected, limiting rate to 40pps.
    [ 13.176505] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
    [ 13.281202] r8169 0000:02:00.0 enp2s0: link up
    [ 13.281217] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 58.128158] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 58.130408] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 58.130452] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 109.328326] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 109.330585] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 109.330630] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 160.528316] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 160.530573] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 160.530618] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 211.728185] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 211.730571] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 211.732244] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 262.928181] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 262.930566] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 262.930611] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 265.370085] usb 8-2: new high-speed USB device number 4 using ehci-pci
    [ 265.494922] usb-storage 8-2:1.0: USB Mass Storage device detected
    [ 265.495068] scsi8 : usb-storage 8-2:1.0
    [ 266.497382] scsi 8:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
    [ 266.498486] sd 8:0:0:0: [sdd] 30869504 512-byte logical blocks: (15.8 GB/14.7 GiB)
    [ 266.498838] sd 8:0:0:0: [sdd] Write Protect is off
    [ 266.498846] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [ 266.499693] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
    [ 266.504858] sdd: sdd1
    [ 266.507231] sd 8:0:0:0: [sdd] Attached SCSI removable disk
    [ 314.128208] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 314.130471] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 314.130515] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 365.328177] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 365.330426] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 365.330468] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 416.528155] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    [ 416.530414] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 416.532015] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    dmesg after reboot
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077b6bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000077bbf000-0x0000000077c85fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077c86000-0x0000000077cbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000077cbf000-0x0000000077cebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077cec000-0x0000000077cfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000077cff000-0x0000000077cfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000077d00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x77d00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-CFFFF uncachable
    [ 0.000000] D0000-DFFFF write-protect
    [ 0.000000] E0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
    [ 0.000000] 1 base 000000000 mask FC0000000 write-back
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 078000000 mask FF8000000 uncachable
    [ 0.000000] 4 base 077E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 base 077D00000 mask FFFF00000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x766

    Hi!
    Well, I turned off the WiFi physical switch, turned on the computer and then I did:
    sudo systemctl disable NetworkManager
    sudo systemctl disable dhcpcd
    sudo systemctl disable netctl
    I'm not sure if that's enough.
    Then I rebooted the machine, connected the ethernet cable, and:
    [me@there ~]$ sudo dhcpcd
    dhcpcd[520]: version 6.1.0 starting
    dhcpcd[520]: no interfaces have a carrier
    dhcpcd[520]: forced to background, child pid 639
    I ping Google, and I could reach it, but I could not connect some other device. Then:
    [me@there ~]$ sudo dhcpcd -x
    dhcpcd[742]: sending signal 15 to pid 639
    dhcpcd[742]: waiting por pid 693 to exit
    Again:
    [me@there ~]$ sudo dhcpcd
    dhcpcd[746]: version 6.1.0 starting
    dhcpcd[746]: wlp3s0: up_interface: Operation not possible due to RF-kill
    dhcpcd[746]: enp2s0: rebinding lease of 192.168.1.70
    dhcpcd[746]: wlp3s0: waiting for a carrier
    dhcpcd[746]: no interfaces have a carrier
    dhcpcd[746]: enp2s0: soliciting a DHCP lease
    dhcpcd[746]: timed out
    dhcpcd[746]: forced to background, child pid 868
    And, just to be sure, ping returned "unknown host".
    After a while, the router restarted.
    I also looked for a newer firmware for my router, but I couldn't find one, nor the manufacturer home page.
    And I have thought like that, fukawi2, ArchLinux is so Up-To-Date, other things may fail.
    I can request a new router to my ISP, but I may encounter this issue again when I use my laptop somewhere else.
    Last edited by Ricardo Galo (2014-02-05 18:31:36)

  • Qosmio E10: Is it possible to upgrade the graphic adapter?

    Hello there,
    I have a question regarding a Qosimio E10. Is it possible to upgrade the graphics Adapter to a more recent one. (Now : Geforce FX 5200 Go 64 Mb) Because the one i use now is ot of date and I dont want to buy a new notebook just because of a Graphics Card !
    Thanks for your help
    Marco

    Hi
    No, its not possible because the graphic card is a little small chip which was fixed on the mainboard. The graphic card design is not the same like on the PC desktop.

  • Ruby on rails in archlinux bootstrap instalation

    I have 6 servers that were migrated from CentOS to Archlinux. They run apache with ruby on rails. The installations were done via bootstrap with one exception. In all they had to have them installed via bootstrap error "invalid byte sequence in US-ASCII ". I created a debug to see what is happening because the whole application runs on UTF-8. I noticed that the servers installed with bootstrap changed the environment variables, these changes occurred with the application running.
    before the error
    ENV inspect {"XDG_DATA_HOME"=>"/root/.local/share", "GEM_HOME"=>"/usr/lib/ruby/gems/1.9.1", "TERM"=>"xterm", "SHELL"=>"/bin/bash", "SSH_CLIENT"=>"***.**.** 45873 22", "OLDPWD"=>"/home/fusion-apps/minika.objectdata.com.br/rails", "SSH_TTY"=>"/dev/pts/0", "USER"=>"mongrel", "XDG_CONFIG_DIRS"=>"/etc/xdg", "MAIL"=>"/var/mail/root", "PATH"=>"/usr/lib/ruby/gems/1.9.1/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl", "PWD"=>"/home/fusion-apps/minika.objectdata.com.br/rails", "LANG"=>"pt_BR.UTF-8", "PS3"=>"> ", "SHLVL"=>"3", "PS4"=>"+ ", "HOME"=>"/home/mongrel", "XDG_CONFIG_HOME"=>"/root/.config", "BUNDLE_GEMFILE"=>"/home/fusion-apps/minika.objectdata.com.br/rails/Gemfile", "XDG_CACHE_HOME"=>"/root/.cache", "LOGNAME"=>"mongrel", "XDG_DATA_DIRS"=>"/usr/share/:/usr/local/share/", "SSH_CONNECTION"=>"201.95.50.68 45873 192.168.0.200 22", "GEM_PATH"=>"", "PROMPT_COMMAND"=>"echo -ne \"\\033]0;${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\\007\"", "RUBYOPT"=>"-I/usr/lib/ruby/gems/1.9.1/gems/bundler-1.0.10/lib -rbundler/setup", "BUNDLE_BIN_PATH"=>"/usr/lib/ruby/gems/1.9.1/gems/bundler-1.0.10/bin/bundle", "G_BROKEN_FILENAMES"=>"1", "_"=>"/usr/bin/bundle", "RAILS_ENV"=>"production"}
    $LANG => pt_BR.UTF-8
    after error
    ENV inspect {"GEM_HOME"=>"/usr/lib/ruby/gems/1.9.1", "SHELL"=>"/bin/bash", "SSH_CLIENT"=>"***.**.** 12975 22", "OLDPWD"=>"/home/fusion-apps/minika.objectdata.com.br/rails", "USER"=>"mongrel", "MAIL"=>"/var/mail/root", "PATH"=>"/usr/lib/ruby/gems/1.9.1/bin:/usr/bin:/bin:/usr/sbin:/sbin", "PWD"=>"/home/fusion-apps/minika.objectdata.com.br/rails", "SHLVL"=>"3", "HOME"=>"/home/mongrel", "BUNDLE_GEMFILE"=>"/home/fusion-apps/minika.objectdata.com.br/rails/Gemfile", "LOGNAME"=>"mongrel", "SSH_CONNECTION"=>"189.111.110.78 12975 192.168.0.200 22", "GEM_PATH"=>"", "RUBYOPT"=>"-I/usr/lib/ruby/gems/1.9.1/gems/bundler-1.0.10/lib -rbundler/setup", "BUNDLE_BIN_PATH"=>"/usr/lib/ruby/gems/1.9.1/gems/bundler-1.0.10/bin/bundle", "_"=>"/usr/bin/bundle", "RAILS_ENV"=>"production"}
    $LANG =>
    The frequency of the error is one of the servers is 30 in 30 minutes, which made me disable syslog and crontab, but still not resolved, the others are one time during the day or at night.
    As I said, the facilities with Centos or Arch with CD do not present problems.
    Last edited by ariveira (2011-05-20 13:26:14)

    One topic, bootstrap install usage http://arm.konnichi.com/2010/10/18/ repo because limit of Centos, after pacman -Suy

  • Archlinux + udev + XOrg 1.5 = Godsend live USB || live CD

    Wow. I have finally seen the power of udev autodection and X Input
    Hotplugging.
    I have been booting my xorg.conf-less USB hard disk
    on various PCs with various graphic cards such as Intel, Nvidia , SIS
    without the need to do any configuration.
    And since i install all the wireless modules and firmware etc ipw2*,iwl*,rt*
    on my USB hard disk which has been my Arch testing hard disk
    has become a live USB!!
    Gone are the days of modprobing modules and reconfiguring X.
    For those who are complaining about the new XOrg update, you should
    try deleting xorg.conf and see its power.:D
    And for PCs which don't support booting from USB hard disk, larch comes
    to the rescue. With larch, I can have similar setup to my USB hard disk. eg:
    avast antivirus, opera, kdemod, krusader, akregator.
    This is so great unlike some distro which can only create a livecd from the current
    bootup root partition.
    Just fyi, I don't feel comfortable surfing the net on a Windows PC. I will normally
    insert a linux liveCD on such PCs.
    I am so glad that I found Archlinux. It is the right distro for me.
    I just feel at home.
    It has just been almost 4 months on Archlinux but I have learn so much things about linux.
    I would like to thanks the reviews of Archlinux for providing an insight and
    PClinuxOS. Yes PClinuxOS, for not upgrading their packages if not i wll be stuck
    in a user-friendly distro.  I don't need a user-friendly distro now.
    I just need a distro that I can have control with.
    Sorry for the rant on the last 2 paragraph but I can't stop praising Archlinux
    with its dedicated developers and TUs.

    Wow. I have finally seen the power of udev autodection and X Input
    Hotplugging.
    I have been booting my xorg.conf-less USB hard disk
    on various PCs with various graphic cards such as Intel, Nvidia , SIS
    without the need to do any configuration.
    And since i install all the wireless modules and firmware etc ipw2*,iwl*,rt*
    on my USB hard disk which has been my Arch testing hard disk
    has become a live USB!!
    Gone are the days of modprobing modules and reconfiguring X.
    For those who are complaining about the new XOrg update, you should
    try deleting xorg.conf and see its power.:D
    And for PCs which don't support booting from USB hard disk, larch comes
    to the rescue. With larch, I can have similar setup to my USB hard disk. eg:
    avast antivirus, opera, kdemod, krusader, akregator.
    This is so great unlike some distro which can only create a livecd from the current
    bootup root partition.
    Just fyi, I don't feel comfortable surfing the net on a Windows PC. I will normally
    insert a linux liveCD on such PCs.
    I am so glad that I found Archlinux. It is the right distro for me.
    I just feel at home.
    It has just been almost 4 months on Archlinux but I have learn so much things about linux.
    I would like to thanks the reviews of Archlinux for providing an insight and
    PClinuxOS. Yes PClinuxOS, for not upgrading their packages if not i wll be stuck
    in a user-friendly distro.  I don't need a user-friendly distro now.
    I just need a distro that I can have control with.
    Sorry for the rant on the last 2 paragraph but I can't stop praising Archlinux
    with its dedicated developers and TUs.

  • [SOLVED] Archlinux not detecting full ammount of RAM (again)

    Hello everyone!
    i've got a problem similar to this one: https://bbs.archlinux.org/viewtopic.php?id=126170
    i've tried brilliant solution by gabe.benson:
    Well, I fixed it.  I re-seated the RAM and rebooted, everything works fine now.
    but got no result.
    i have lenovo g580 laptop with 4 G of ram.
    lshw -short | grep 'System\ Memory'
    /0/28 memory 4GiB System Memory
    lshw | grep -A 8 bank
    sudo lshw | grep -A 8 bank
    *-bank:0
    description: SODIMM DDR3 Synchronous 800 MHz (1,2 ns)
    product: 16KTF51264HZ-1G6M1
    vendor: Micron Technology
    physical id: 0
    serial: E962DADF
    slot: DIMM0
    size: 4GiB
    width: 64 bits
    *-bank:1
    description: DIMM [empty]
    product: Empty
    vendor: Empty
    physical id: 1
    serial: Empty
    slot: DIMM1
    but system says that i hve only 3 G of ram:
    cat /proc/meminfo | grep -i memtotal
    MemTotal: 3018460 kB
    free -m
    total used free shared buffers cached
    Mem: 2947 900 2047 0 13 455
    -/+ buffers/cache: 430 2517
    Swap: 956 0 956
    my RAM is recognized in BIOS and was recognized in win7 when win7 was still installed...
    here are some info
    uname -a
    Linux architect 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012 i686 GNU/Linux
    dmesg full output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000baabf000 (usable)
    [ 0.000000] BIOS-e820: 00000000baabf000 - 00000000baebf000 (reserved)
    [ 0.000000] BIOS-e820: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bafbf000 - 00000000bafff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000013f600000 (usable)
    [ 0.000000] e820 remove range: 0000000100000000 - ffffffffffffffff (usable)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] user-defined physical RAM map:
    [ 0.000000] user: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] user: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] user: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] user: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] user: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] user: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] user: 0000000040005000 - 00000000baabf000 (usable)
    [ 0.000000] user: 00000000baabf000 - 00000000baebf000 (reserved)
    [ 0.000000] user: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
    [ 0.000000] user: 00000000bafbf000 - 00000000bafff000 (ACPI data)
    [ 0.000000] user: 00000000bafff000 - 00000000bb000000 (usable)
    [ 0.000000] user: 00000000bb000000 - 00000000bfa00000 (reserved)
    [ 0.000000] user: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] user: 00000000feb00000 - 00000000feb04000 (reserved)
    [ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] user: 00000000fed10000 - 00000000fed1a000 (reserved)
    [ 0.000000] user: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] user: 00000000ffb80000 - 0000000100000000 (reserved)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN32WW(V2.02) 04/24/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 37abc000 - 37d56000
    [ 0.000000] Allocated new RAMDISK: 37564000 - 377fda9c
    [ 0.000000] Move RAMDISK from 0000000037abc000 - 0000000037d55a9b to 37564000 - 377fda9b
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS bafbb000 00040
    [ 0.000000] ACPI: UEFI baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SLIC bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2104MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000bb000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000baabf
    [ 0.000000] 0: 0x000bafff -> 0x000bb000
    [ 0.000000] On node 0 totalpages: 763980
    [ 0.000000] free_area_init_node: node 0, pgdat c151ec80, node_mem_map f5e03200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 220974 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4209 pages used for memmap
    [ 0.000000] HighMem zone: 533072 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:30600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5d89000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 757995
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=fe7ca6ad-90bf-40d6-9d16-836f808ae890 ro ro quiet splash init=/bin/systemd mem=4G
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 6127488 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000bb000)
    [ 0.000000] Memory: 3015272k/3063808k available (3810k kernel code, 40648k reserved, 1472k data, 524k init, 2149124k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc1529000 - 0xc15ac000 ( 524 kB)
    [ 0.000000] .data : 0xc13b8837 - 0xc1528840 (1472 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc13b8837 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:744 16
    [ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2494.324 MHz processor.
    [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314413)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000022] Security Framework initialized
    [ 0.000025] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000035] Mount-cache hash table entries: 512
    [ 0.000187] Initializing cgroup subsys cpuacct
    [ 0.000188] Initializing cgroup subsys memory
    [ 0.000193] Initializing cgroup subsys devices
    [ 0.000195] Initializing cgroup subsys freezer
    [ 0.000196] Initializing cgroup subsys net_cls
    [ 0.000198] Initializing cgroup subsys blkio
    [ 0.000221] CPU: Physical Processor ID: 0
    [ 0.000222] CPU: Processor Core ID: 0
    [ 0.000226] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.000227] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.000948] mce: CPU supports 7 MCE banks
    [ 0.000958] CPU0: Thermal monitoring enabled (TM1)
    [ 0.000965] using mwait in idle threads.
    [ 0.001745] ACPI: Core revision 20120320
    [ 0.020574] ftrace: allocating 16939 entries in 34 pages
    [ 0.031595] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.032013] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.064975] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
    [ 0.170127] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.170132] ... version: 3
    [ 0.170133] ... bit width: 48
    [ 0.170134] ... generic registers: 4
    [ 0.170135] ... value mask: 0000ffffffffffff
    [ 0.170136] ... max period: 000000007fffffff
    [ 0.170137] ... fixed-purpose events: 3
    [ 0.170139] ... event mask: 000000070000000f
    [ 0.190193] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.210090] CPU 1 irqstacks, hard=f5164000 soft=f5166000
    [ 0.210093] Booting Node 0, Processors #1
    [ 0.220329] Initializing CPU#1
    [ 0.223930] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.236742] CPU 2 irqstacks, hard=f5172000 soft=f5174000
    [ 0.236744] #2
    [ 0.247052] Initializing CPU#2
    [ 0.250659] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.263373] CPU 3 irqstacks, hard=f5180000 soft=f5182000
    [ 0.263374] #3
    [ 0.273681] Initializing CPU#3
    [ 0.277289] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.277313] Brought up 4 CPUs
    [ 0.277314] Total of 4 processors activated (19962.03 BogoMIPS).
    [ 0.280644] devtmpfs: initialized
    [ 0.280809] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
    [ 0.281540] NET: Registered protocol family 16
    [ 0.281663] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.281665] ACPI: bus type pci registered
    [ 0.281715] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.281718] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.281719] PCI: Using MMCONFIG for extended config space
    [ 0.281720] PCI: Using configuration type 1 for base access
    [ 0.281825] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.281827] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.281828] mtrr: corrected configuration.
    [ 0.282156] bio: create slab <bio-0> at 0
    [ 0.282198] ACPI: Added _OSI(Module Device)
    [ 0.282200] ACPI: Added _OSI(Processor Device)
    [ 0.282201] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282203] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.283613] ACPI: EC: Look up EC in DSDT
    [ 0.285039] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.287544] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.288407] ACPI: SSDT bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.288766] ACPI: Dynamic OEM Table Load:
    [ 0.288768] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
    [ 0.288969] ACPI: SSDT bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.289350] ACPI: Dynamic OEM Table Load:
    [ 0.289352] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
    [ 0.289436] ACPI: SSDT bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.289789] ACPI: Dynamic OEM Table Load:
    [ 0.289791] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
    [ 0.290616] ACPI: Interpreter enabled
    [ 0.290621] ACPI: (supports S0 S3 S4 S5)
    [ 0.290639] ACPI: Using IOAPIC for interrupt routing
    [ 0.412595] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.412750] ACPI: No dock devices found.
    [ 0.412754] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.413003] \_SB_.PCI0:_OSC invalid UUID
    [ 0.413004] _OSC request data:1 8 1f
    [ 0.413007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.413400] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.413402] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.413404] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.413406] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
    [ 0.413431] PCI host bridge to bus 0000:00
    [ 0.413433] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.413434] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.413436] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.413438] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.413445] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.413479] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.413509] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.413522] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
    [ 0.413550] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
    [ 0.413567] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.413578] pci 0000:00:02.0: reg 10: [mem 0xd3000000-0xd33fffff 64bit]
    [ 0.413584] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.413589] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
    [ 0.413640] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.413662] pci 0000:00:14.0: reg 10: [mem 0xd3600000-0xd360ffff 64bit]
    [ 0.413733] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.413756] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.413779] pci 0000:00:16.0: reg 10: [mem 0xd3614000-0xd361400f 64bit]
    [ 0.413855] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.413889] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.414140] pci 0000:00:1a.0: reg 10: [mem 0xd3619000-0xd36193ff]
    [ 0.415551] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.415579] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.415594] pci 0000:00:1b.0: reg 10: [mem 0xd3610000-0xd3613fff 64bit]
    [ 0.415662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.415685] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.415764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.415789] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.415868] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.415902] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.416142] pci 0000:00:1d.0: reg 10: [mem 0xd3618000-0xd36183ff]
    [ 0.417555] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.417582] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.417707] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.417725] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
    [ 0.417733] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
    [ 0.417741] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
    [ 0.417750] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
    [ 0.417758] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
    [ 0.417766] pci 0000:00:1f.2: reg 24: [mem 0xd3617000-0xd36177ff]
    [ 0.417811] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.417830] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.417846] pci 0000:00:1f.3: reg 10: [mem 0xd3615000-0xd36150ff 64bit]
    [ 0.417867] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
    [ 0.417922] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.417933] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    [ 0.417943] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.417953] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.417960] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.417968] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.423139] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.423155] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.423158] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
    [ 0.423161] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.423180] pci 0000:00:01.1: PCI bridge to [bus 02-02]
    [ 0.423362] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000
    [ 0.423510] pci 0000:03:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
    [ 0.423568] pci 0000:03:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.424132] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.429854] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.429858] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.429863] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
    [ 0.429934] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
    [ 0.429961] pci 0000:04:00.0: reg 10: [mem 0xd3400000-0xd340ffff 64bit]
    [ 0.430091] pci 0000:04:00.0: supports D1
    [ 0.430092] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
    [ 0.436456] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    [ 0.436477] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
    [ 0.436498] pci_bus 0000:00: on NUMA node 0
    [ 0.436500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.436604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.436627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.436661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.436683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
    [ 0.436741] \_SB_.PCI0:_OSC invalid UUID
    [ 0.436743] _OSC request data:1 1f 1f
    [ 0.436746] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.436777] \_SB_.PCI0:_OSC invalid UUID
    [ 0.436778] _OSC request data:1 0 1d
    [ 0.436781] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 0.436783] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.439162] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.439198] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.439233] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439267] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.439301] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439336] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.439372] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 0.439407] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.439462] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.439466] vgaarb: loaded
    [ 0.439467] vgaarb: bridge control possible 0000:00:02.0
    [ 0.439493] PCI: Using ACPI for IRQ routing
    [ 0.441016] PCI: pci_cache_line_size set to 64 bytes
    [ 0.441100] reserve RAM buffer: 000000000009d800 - 000000000009ffff
    [ 0.441102] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 0.441104] reserve RAM buffer: 00000000baabf000 - 00000000bbffffff
    [ 0.441106] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
    [ 0.441172] NetLabel: Initializing
    [ 0.441174] NetLabel: domain hash size = 128
    [ 0.441175] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.441184] NetLabel: unlabeled traffic allowed by default
    [ 0.441221] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.441226] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.444239] Switching to clocksource hpet
    [ 0.448544] pnp: PnP ACPI init
    [ 0.448556] ACPI: bus type pnp registered
    [ 0.448788] pnp 00:00: [bus 00-3e]
    [ 0.448791] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.448792] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.448794] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.448796] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.448797] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.448799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.448800] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.448802] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.448803] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.448805] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.448807] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.448808] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.448810] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.448811] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.448813] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.448814] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.448816] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.448817] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
    [ 0.448819] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 0.448861] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.448872] pnp 00:01: [io 0x0000-0x001f]
    [ 0.448873] pnp 00:01: [io 0x0081-0x0091]
    [ 0.448874] pnp 00:01: [io 0x0093-0x009f]
    [ 0.448876] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.448877] pnp 00:01: [dma 4]
    [ 0.448895] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.448901] pnp 00:02: [mem 0xff010000-0xffffffff]
    [ 0.448916] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.448969] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.448985] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.448991] pnp 00:04: [io 0x00f0]
    [ 0.448999] pnp 00:04: [irq 13]
    [ 0.449016] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.449024] pnp 00:05: [io 0x002e-0x002f]
    [ 0.449025] pnp 00:05: [io 0x004e-0x004f]
    [ 0.449027] pnp 00:05: [io 0x0061]
    [ 0.449028] pnp 00:05: [io 0x0063]
    [ 0.449029] pnp 00:05: [io 0x0065]
    [ 0.449030] pnp 00:05: [io 0x0067]
    [ 0.449032] pnp 00:05: [io 0x0070]
    [ 0.449033] pnp 00:05: [io 0x0080]
    [ 0.449034] pnp 00:05: [io 0x0092]
    [ 0.449035] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.449037] pnp 00:05: [io 0x0680-0x069f]
    [ 0.449038] pnp 00:05: [io 0x1000-0x100f]
    [ 0.449039] pnp 00:05: [io 0xffff]
    [ 0.449041] pnp 00:05: [io 0xffff]
    [ 0.449042] pnp 00:05: [io 0x0400-0x0453]
    [ 0.449043] pnp 00:05: [io 0x0458-0x047f]
    [ 0.449045] pnp 00:05: [io 0x0500-0x057f]
    [ 0.449046] pnp 00:05: [io 0x164e-0x164f]
    [ 0.449047] pnp 00:05: [io 0xfd60-0xfd63]
    [ 0.449079] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.449081] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 0.449083] system 00:05: [io 0xffff] has been reserved
    [ 0.449085] system 00:05: [io 0xffff] has been reserved
    [ 0.449087] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.449088] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.449090] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.449092] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.449094] system 00:05: [io 0xfd60-0xfd63] has been reserved
    [ 0.449096] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.449102] pnp 00:06: [io 0x0070-0x0077]
    [ 0.449106] pnp 00:06: [irq 8]
    [ 0.449123] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.449141] pnp 00:07: [io 0x0454-0x0457]
    [ 0.449165] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.449168] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.449175] pnp 00:08: [io 0x0060]
    [ 0.449177] pnp 00:08: [io 0x0064]
    [ 0.449181] pnp 00:08: [irq 1]
    [ 0.449197] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.449238] pnp 00:09: [irq 12]
    [ 0.449257] pnp 00:09: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
    [ 0.507625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.507627] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 0.507629] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 0.507630] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 0.507631] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
    [ 0.507633] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.507634] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 0.507636] pnp 00:0a: [mem 0xff000000-0xff000fff]
    [ 0.507637] pnp 00:0a: [mem 0xff010000-0xffffffff]
    [ 0.507639] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.507640] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
    [ 0.507671] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.507673] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.507675] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.507677] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.507679] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.507681] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.507683] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.507685] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.507687] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.507689] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.507691] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 0.507693] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.507937] pnp 00:0b: [mem 0x20000000-0x201fffff]
    [ 0.507939] pnp 00:0b: [mem 0x40004000-0x40004fff]
    [ 0.507980] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.507981] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.507984] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.507998] pnp: PnP ACPI: found 12 devices
    [ 0.507999] ACPI: ACPI bus type pnp unregistered
    [ 0.544171] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.544202] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
    [ 0.544204] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.544207] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.544209] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
    [ 0.544212] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.544215] pci 0000:00:01.1: PCI bridge to [bus 02-02]
    [ 0.544221] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.544224] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.544229] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
    [ 0.544237] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    [ 0.544242] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
    [ 0.544275] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.544277] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.544279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.544281] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
    [ 0.544282] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.544284] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
    [ 0.544286] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.544288] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.544289] pci_bus 0000:03: resource 1 [mem 0xd3500000-0xd35fffff]
    [ 0.544291] pci_bus 0000:04: resource 1 [mem 0xd3400000-0xd34fffff]
    [ 0.544322] NET: Registered protocol family 2
    [ 0.544358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.544442] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.544615] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.544703] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.544705] TCP: reno registered
    [ 0.544707] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.544711] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.544756] NET: Registered protocol family 1
    [ 0.544767] pci 0000:00:02.0: Boot video device
    [ 0.570851] PCI: CLS 64 bytes, default 64
    [ 0.570880] Unpacking initramfs...
    [ 0.619052] Freeing initrd memory: 2664k freed
    [ 0.619338] Simple Boot Flag at 0x44 set to 0x1
    [ 0.619589] apm: BIOS not found.
    [ 0.619736] audit: initializing netlink socket (disabled)
    [ 0.619749] type=2000 audit(1345095829.503:1): initialized
    [ 0.619994] highmem bounce pool size: 64 pages
    [ 0.619997] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.621206] VFS: Disk quotas dquot_6.5.2
    [ 0.621241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.621308] msgmni has been set to 1696
    [ 0.621446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.621472] io scheduler noop registered
    [ 0.621474] io scheduler deadline registered
    [ 0.621480] io scheduler cfq registered (default)
    [ 0.621551] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.621602] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
    [ 0.621760] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.621762] vesafb: scrolling: redraw
    [ 0.621764] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.622118] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 4160k, total 4160k
    [ 0.622154] fbcon: VESA VGA (fb0) is primary device
    [ 0.689580] Console: switching to colour frame buffer device 170x48
    [ 0.756633] fb0: VESA VGA frame buffer device
    [ 0.756646] intel_idle: does not run on family 6 model 58
    [ 0.756664] GHES: HEST is not enabled!
    [ 0.756672] isapnp: Scanning for PnP cards...
    [ 1.069356] isapnp: No Plug & Play device found
    [ 1.069400] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.069903] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
    [ 1.084587] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.084595] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.084687] mousedev: PS/2 mouse device common for all mice
    [ 1.084893] rtc_cmos 00:06: RTC can wake from S4
    [ 1.085015] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.085044] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.085057] cpuidle: using governor ladder
    [ 1.085058] cpuidle: using governor menu
    [ 1.085166] TCP: cubic registered
    [ 1.085234] NET: Registered protocol family 10
    [ 1.085368] NET: Registered protocol family 17
    [ 1.085372] Registering the dns_resolver key type
    [ 1.085415] Using IPI No-Shortcut mode
    [ 1.085482] PM: Hibernation image not present or could not be loaded.
    [ 1.085486] registered taskstats version 1
    [ 1.085919] rtc_cmos 00:06: setting system clock to 2012-08-16 05:43:50 UTC (1345095830)
    [ 1.085964] Initializing network drop monitor service
    [ 1.086010] Freeing unused kernel memory: 524k freed
    [ 1.086116] Write protecting the kernel text: 3812k
    [ 1.086134] Write protecting the kernel read-only data: 1124k
    [ 1.091427] systemd-udevd[49]: starting version 188
    [ 1.092112] Setting new ACPI handle for discrete video card
    [ 1.097570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.120297] usbcore: registered new interface driver usbfs
    [ 1.120320] usbcore: registered new interface driver hub
    [ 1.120939] usbcore: registered new device driver usb
    [ 1.121264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.121303] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.121307] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.121324] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.121346] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.121985] SCSI subsystem initialized
    [ 1.122870] libata version 3.00 loaded.
    [ 1.125236] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.125257] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3619000
    [ 1.133400] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.133553] hub 1-0:1.0: USB hub found
    [ 1.133559] hub 1-0:1.0: 2 ports detected
    [ 1.133819] ahci 0000:00:1f.2: version 3.0
    [ 1.133882] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.133943] ahci: SSS flag set, parallel bus scan disabled
    [ 1.146744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 1.146747] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
    [ 1.146751] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.153993] scsi0 : ahci
    [ 1.154077] scsi1 : ahci
    [ 1.154147] scsi2 : ahci
    [ 1.154215] scsi3 : ahci
    [ 1.154277] scsi4 : ahci
    [ 1.154340] scsi5 : ahci
    [ 1.154412] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 42
    [ 1.154414] ata2: DUMMY
    [ 1.154417] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 42
    [ 1.154418] ata4: DUMMY
    [ 1.154419] ata5: DUMMY
    [ 1.154420] ata6: DUMMY
    [ 1.154464] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.154469] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.154480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 1.154590] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.154604] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3600000
    [ 1.154654] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.154773] xHCI xhci_add_endpoint called for root hub
    [ 1.154775] xHCI xhci_check_bandwidth called for root hub
    [ 1.154808] hub 2-0:1.0: USB hub found
    [ 1.154816] hub 2-0:1.0: 4 ports detected
    [ 1.154879] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.154883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.154958] xHCI xhci_add_endpoint called for root hub
    [ 1.154960] xHCI xhci_check_bandwidth called for root hub
    [ 1.154991] hub 3-0:1.0: USB hub found
    [ 1.155001] hub 3-0:1.0: 4 ports detected
    [ 1.155111] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.155116] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.155124] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 1.155149] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.159035] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.159048] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3618000
    [ 1.166703] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.166815] hub 4-0:1.0: USB hub found
    [ 1.166818] hub 4-0:1.0: 2 ports detected
    [ 1.439689] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.472980] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.525743] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
    [ 1.525760] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.527718] ata1.00: configured for UDMA/100
    [ 1.527831] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
    [ 1.563385] hub 1-1:1.0: USB hub found
    [ 1.563489] hub 1-1:1.0: 6 ports detected
    [ 1.619459] Refined TSC clocksource calibration: 2494.333 MHz.
    [ 1.619462] Switching to clocksource tsc
    [ 1.669365] usb 4-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.793111] hub 4-1:1.0: USB hub found
    [ 1.793177] hub 4-1:1.0: 6 ports detected
    [ 1.845823] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.848881] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
    [ 1.849780] ata3.00: configured for UDMA/100
    [ 1.852483] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
    [ 1.857313] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.857364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.857367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.857386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.859247] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
    [ 1.863186] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.863202] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.863302] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.883796] sda: sda1 sda2 sda3
    [ 1.884063] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.009051] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
    [ 2.158842] usb 4-1.6: new high-speed USB device number 3 using ehci_hcd
    [ 2.432799] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
    [ 2.432823] REISERFS (device sda1): using ordered data mode
    [ 2.432825] reiserfs: using flush barriers
    [ 2.433215] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 2.433387] REISERFS (device sda1): checking transaction log (sda1)
    [ 2.515756] REISERFS (device sda1): Using r5 hash to sort names
    [ 3.230646] systemd[1]: systemd 188 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.408334] systemd[1]: Inserted module 'autofs4'
    [ 3.408399] systemd[1]: Set hostname to <architect>.
    [ 3.973819] systemd[1]: [/usr/lib/systemd/system/rc-local-shutdown.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
    [ 4.034956] systemd[1]: [/usr/lib/systemd/system/rc-local.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
    [ 4.518631] systemd-udevd[153]: starting version 188
    [ 4.577734] reiserfs: enabling write barrier flush mode
    [ 4.652314] systemd-journald[154]: Fixed max_use=147.3M max_size=18.4M min_size=64.0K keep_free=73.6M
    [ 4.652347] systemd-journald[154]: Reserving 33543 entries in hash table.
    [ 4.652841] systemd-journald[154]: Vacuuming...
    [ 5.169943] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
    [ 5.169950] ACPI: Power Button [PWRB]
    [ 5.170018] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
    [ 5.170022] ACPI: Sleep Button [SLPB]
    [ 5.170072] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 5.170100] ACPI: Lid Switch [LID0]
    [ 5.170134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.170137] ACPI: Power Button [PWRF]
    [ 5.189868] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 5.221888] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.273251] iTCO_vendor_support: vendor-support=0
    [ 5.273680] ACPI: AC Adapter [ACAD] (off-line)
    [ 5.408767] Linux agpgart interface v0.103
    [ 5.510286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 5.510375] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 5.510484] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.526899] psmouse serio1: hgpk: ID: 10 00 64
    [ 5.701959] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 5.790910] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.790913] ACPI: Thermal Zone [TZ00] (42 C)
    [ 5.790952] ACPI: Requesting acpi_cpufreq
    [ 5.876744] [drm] Initialized drm 1.1.0 20060810
    [ 5.913735] Monitor-Mwait will be used to enter C-1 state
    [ 5.913759] Monitor-Mwait will be used to enter C-2 state
    [ 5.913781] Monitor-Mwait will be used to enter C-3 state
    [ 5.913795] ACPI: acpi_idle registered with cpuidle
    [ 5.957095] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.970540] ACPI: Battery Slot [BAT1] (battery present)
    [ 6.011581] hda_codec: CX20590: BIOS auto-probing.
    [ 6.012383] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 6.085516] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
    [ 6.108981] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
    [ 6.135296] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 6.135369] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.135418] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 6.135642] mei 0000:00:16.0: setting latency timer to 64
    [ 6.135699] mei 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 6.138210] ACPI Warning: 0x00004040-0x0000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 6.138216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.138366] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 6.138415] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 6.139135] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 6.140739] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 6.157387] input: Ideapad extra buttons as /devices/platform/ideapad/input/input10
    [ 6.181781] i915 0000:00:02.0: setting latency timer to 64
    [ 6.195724] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 6.195732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.195733] [drm] Driver supports precise vblank timestamp query.
    [ 6.196268] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.229397] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
    [ 6.407852] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.407855] Disabling lock debugging due to kernel taint
    [ 6.414984] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.414988] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 6.415066] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.37 Wed Aug 8 19:50:16 PDT 2012
    [ 6.473350] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 6.558887] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 6.559193] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 6.559538] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 6.559899] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.570364] ath: EEPROM regdomain: 0x65
    [ 6.570366] ath: EEPROM indicates we should expect a direct regpair map
    [ 6.570368] ath: Country alpha2 being used: 00
    [ 6.570369] ath: Regpair used: 0x65
    [ 6.625369] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 6.625531] Registered led device: ath9k-phy0
    [ 6.625536] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf88c0000, irq=17
    [ 6.648775] Linux media interface: v0.10
    [ 6.648993] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 6.652561] Bluetooth: Core ver 2.16
    [ 6.652578] NET: Registered protocol family 31
    [ 6.652580] Bluetooth: HCI device and connection manager initialized
    [ 6.652582] Bluetooth: HCI socket layer initialized
    [ 6.652584] Bluetooth: L2CAP socket layer initialized
    [ 6.652588] Bluetooth: SCO socket layer initialized
    [ 6.684781] Linux video capture interface: v2.00
    [ 6.761692] usbcore: registered new interface driver btusb
    [ 6.815537] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 6.819406] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 6.819536] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 6.820922] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 6.821739] usbcore: registered new interface driver rts5139
    [ 6.822866] checking generic (e0000000 410000) vs hw (e0000000 10000000)
    [ 6.822869] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 6.822882] Console: switching to colour dummy device 80x25
    [ 6.823406] fbcon: inteldrmfb (fb0) is primary device
    [ 6.830840] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
    [ 6.832754] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input12
    [ 6.832868] usbcore: registered new interface driver uvcvideo
    [ 6.832869] USB Video Class driver (1.1.1)
    [ 6.995891] Console: switching to colour frame buffer device 170x48
    [ 6.999933] fb0: inteldrmfb frame buffer device
    [ 6.999934] drm: registered panic notifier
    [ 7.000054] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 7.002109] acpi device:38: registered as cooling_device4
    [ 7.002228] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input13
    [ 7.002291] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 7.004500] acpi device:44: registered as cooling_device5
    [ 7.004732] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
    [ 7.004801] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 7.004824] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 7.169641] usbcore: registered new interface driver ath3k
    [ 7.262735] usb 1-1.3: USB disconnect, device number 3
    [ 7.602169] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k
    [ 7.958251] usb 1-1.3: new full-speed USB device number 5 using ehci_hcd
    [ 8.276820] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 8.391735] systemd-journald[154]: Received SIGUSR1
    [ 10.873451] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.128335] Bluetooth: RFCOMM TTY layer initialized
    [ 11.128345] Bluetooth: RFCOMM socket layer initialized
    [ 11.128349] Bluetooth: RFCOMM ver 1.11
    [ 11.413635] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.428469] wlan0: authenticate with 00:23:69:e0:c9:57
    [ 13.440604] wlan0: send auth to 00:23:69:e0:c9:57 (try 1/3)
    [ 13.442540] wlan0: authenticated
    [ 13.449080] wlan0: associating with AP with corrupt beacon
    [ 13.450818] wlan0: associate with 00:23:69:e0:c9:57 (try 1/3)
    [ 13.454879] wlan0: RX AssocResp from 00:23:69:e0:c9:57 (capab=0x411 status=0 aid=2)
    [ 13.461369] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 13.461411] wlan0: associated
    [ 13.535109] bbswitch: version 0.4.2
    [ 13.535116] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 13.535122] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 13.535179] bbswitch: detected an Optimus _DSM function
    [ 13.535187] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 13.621600] bbswitch: disabling discrete graphics
    [ 13.621858] bbswitch: Result of Optimus _DSM call: 11000059
    [ 13.633963] pci 0000:01:00.0: Refused to change power state, currently in D0
    [ 13.639096] pci 0000:01:00.0: power state changed by ACPI to D3
    [ 14.866748] wlan0: IPv6 duplicate address fe80::466d:57ff:fed9:3858 detected!
    [ 19.468382] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
    [ 25.756579] CPU1: Package power limit notification (total events = 1)
    [ 25.756586] CPU0: Package power limit notification (total events = 1)
    [ 25.756605] CPU2: Package power limit notification (total events = 1)
    [ 25.756611] CPU3: Package power limit notification (total events = 1)
    [ 25.756655] CPU1: Package power limit normal
    [ 25.756658] CPU0: Package power limit normal
    [ 25.756676] CPU2: Package power limit normal
    [ 25.756682] CPU3: Package power limit normal
    [ 28.870816] fuse init (API version 7.18)
    [ 405.761491] CPU0: Package power limit notification (total events = 738)
    [ 405.761496] CPU2: Package power limit notification (total events = 738)
    [ 405.761499] CPU3: Package power limit notification (total events = 738)
    [ 405.761503] CPU1: Package power limit notification (total events = 737)
    [ 405.761864] CPU0: Package power limit normal
    [ 405.761884] CPU2: Package power limit normal
    [ 405.761886] CPU3: Package power limit normal
    [ 405.761915] CPU1: Package power limit normal
    [ 453.450036] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 453.450203] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [ 453.450934] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [ 561.690115] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 561.705571] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 713.191865] CPU2: Package power limit notification (total events = 1465)
    [ 713.191872] CPU0: Package power limit notification (total events = 1465)
    [ 713.191876] CPU1: Package power limit notification (total events = 1464)
    [ 713.191881] CPU3: Package power limit notification (total events = 1465)
    [ 713.202700] CPU0: Package power limit normal
    [ 713.202704] CPU1: Package power limit normal
    [ 713.202708] CPU3: Package power limit normal
    [ 713.202711] CPU2: Package power limit normal
    dmesg | grep -i memory
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Memory: 3015272k/3063808k available (3810k kernel code, 40648k reserved, 1472k data, 524k init, 2149124k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000188] Initializing cgroup subsys memory
    [ 0.619052] Freeing initrd memory: 2664k freed
    [ 1.086010] Freeing unused kernel memory: 524k freed
    [ 6.139135] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    i added mem=4G to kernel parameters line in grub bot got nothing.
    anyone have any suggestions?
    Last edited by shohart (2012-08-16 09:01:26)

    buzzqw wrote:a faster solution is to use a 32bit PAE kernel..
    that was the rightest direction. i do not want to start a holywar about 'what is better x86 or x64... the reason is that i've just installed and configurated my system and everything works amasingly well... even bumblebee! so i just use pae kernel for now.... thanks for the answer!
    Awebb wrote:Nice device by the way!
    Yeah, thnx! i've been using HP laptop with AMD turion x64 1,8 Ghz and ATI x200M for like 7 years.... i loved that old man... but when even flash video began to look like a comix.... i ve passed it away, went to the shop and grabbed this Lenovo machine... i wanted i7 but 1,5 kilobucks is too much to pay for a typing machine (it is the main usage of my laptop) for me... thanx everyone for a support. marking as solved.

Maybe you are looking for

  • Videos and video Podcasts won't sync anymore to iPod

    I have a 5th generation 30G Video iPod and used to have all the same videos and video Podcasts playing just fine on my iPod. I reinstalled Mac OS X on my Macbook and added all the videos and videoPodcasts back to my iTunes library and while they play

  • Export to Disk with 64 bit version

    I need to be able to export images that I have edited in LR3 to disk to give to someone and the dialog box tells me that this is not possible in the 64 bit version.  I had to go back to Bridge to do this and my changes to the images were not seen in

  • No information available.

    Hi, when I enter channel no 507 to see whats on BT Sport, all I get is 'no information available'. Anyone know why this is suddenly happening? Been fine foir the sevferal weeks since I first started receiving it.

  • Deleting search history

    Hi there  So here's my problem  When I search something from the browser and would like to delete search history it's not totally being deleted... I've tried going to the 3 dots tapping clear history and clearing cookies and other data But whenever I

  • Info spoke error : ABAP/4 processor: DATASET_NOT_OPEN

    HI all, We have Infospoke with Data source: 0MATERIAL and Destination : BW_MAT In process chain after this infospoke is filled we have ABAP Program to Transfer Material Data. In process chian the load is successfull till infospoke but failed at the A