Archving production order in sara - sap content server

Hello,
we run the sap content server. I have successfully created a content repository that is supposed to store the production orders.
Now when I go to SARA and enter object PP_ORDER, go to storage system - store files and select the archive file I've created, I get the following error message after starting the archive job:
HTTP error: 401 (Unauthorized) "Security SsfVerify failed rc=7, lasterror=4129,PSE not existant, PSE=
?\C:\Program Files\SAP\Con
Message no. CMS025
Diagnosis
Error in accessing via HTTP
401 (Unauthorized)
"Security SsfVerify failed rc=7, lasterror=4129,PSE not existant, PSE=
?\C:\Program Files\SAP\Con
Any help?
Thanks
Anne

Hi all,
I got the same issue after sent certificate successfully in OAC0.
"HTTP error: 401 (Unauthorized) "Security SsfVerify failed rc=7, lasterror=4129,PSE not existant, PSE=C:\Program Files\SAP\Content"
Dis you have the solution?
Thanks,
Hung.

Similar Messages

WebDAV Access: SAP Content Server

Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLM

If the documents are stored in DMS with Content Server as the repository, you should be able to access them using the DMS connector to KM. This is a business package which, when installed, exposes document stored in DMS to KM as a KM repository. Then you can browse it like any other KM repository. There are a lot of posts in this forum and others about the DMS connector.
You can also try to enable WebDAV if you Content Server is using a MaxDB database.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/068edfba705415e10000000a114cbd/frameset.htm
Andrew

SHarepoint as SAP Content Server Configuration

Actually this message is for Espen Leknes because I have read something from him i another message but if you guys know about this, all will be wellcome !!!!!!!
This is Andrea, Basis COnsultant. I am writing to you because I was reading lot of messages in SAP SDN regarding DMS and SAP Content Server.
I saw you have participated in lot of messages. I am specially interested in one of them which is about Sharepoint.
The customer I am working in would like to use Sharepoint as global Content Server and I would like to configure Sharepoint as SAP Content Server in order to save documents and attach them to sap objects (scanned invoices, manuals, cad drawings, etc)
I know it is not possible since Sharepoint is not SAP certified and http inteface from SAP (archivelink) does not work with this product.
I have read about Inet.DM and thinks like this.
I read you have configured SHarepoint as WebDav. In some post you have written:
Hi guys,
There is a third way, where you end up using Sharepoint as your content server
1. COnfigure a content server to use file storage
2. COnfigure the file area for webdav
3. The webdav is the sharepoint webdav
Voila, you are using sharepoint as your content server.
Why the heck you would do that is beyond me, but it works.
Ok, the question is:
I am using ECC60 and I dont have file storage option.
Is is possible to explain this again or sent me screenshots os OAC0 ?? It would be very useful.
Thanks so much in advance for this.
Andrea

Hi Andrea,
I could find few of the links . Hope these are useful.
Duet Enterprise is an SDK for integration between SAP and SharePoint
http://sharepoint.microsoft.com/en-us/product/related-technologies/pages/duet-enterprise-for-sap-and-sharepoint.aspx
configuration
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805b67bd-7e93-2e10-99b7-ebe8f3d359d3?QuickLink=index&overridelayout=true
Regards,
Deepak Kori

Https access to Sap Content Server 620 with R/3 46C

We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
=      using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
=    provides this ordered list of 9 ciphersuites:
=       1. SSL_RSA_WITH_RC4_128_SHA
=       2. SSL_RSA_WITH_RC4_128_MD5
=       3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
=       4. SSL_RSA_WITH_DES_CBC_SHA
=       5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
=       6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
=       7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
=       8. SSL_RSA_WITH_NULL_SHA
=       9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c       774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c       777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards

Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.

SAP Content Server 6.40 on 32 or 64 bit OS?

Hi all,
Can anyone tell me if SAP Content Server 6.40 on NW 2004s with MaxDB 7.6 will run on Windows 2003 64 or 32 bit? I have installed in on a x64 bit 2003 server now, but there seems to be some issues. For starters, I get the following error message when I try to run "http://<hostname>:<portno.>/ContentServer/ContentServer.dll?serverInfo" as part of the post-processing when installing SAP Content Server 6.40:
%1 is not a valid Win32 application.
Does anyone have any ideas?
Regards,
Thomas

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

Storing of MSDS in SAP Content Server - Part2

Hi Friends,
I already raised this issue in link given below.
Storing of MSDS in SAP Content Server
Ealier I did not tried this as we did not received the hardaware,
Now I did configuration as per the note " 1408009 - Settings for EH&S Product Safety documents" for SAP EHS document Type.
But when I try to generate report, its giving me error as given below.
Check Document Type SBR
Internal error in function C14SX_DOCUMENT_ORIGINAL_PUT (exception 0)
Saving document data has failed
Error while checking in and storing: report.rtf
Can you guys help me if any more configurations are needed or am I missing something. The content Server is of OpenText and not SAP Content Server.
Thanks.
With Warm Regards
Mangesh Pande

HI Mangesh,
Try to figure out if it is only DMS related - or if it is something wrong with the EH&S part of the setup:
Create an SBR Document manually via CV01n.
If this fails - at least the DMS Setup is wrong.
If this works - DMS settings should be fine and the problem is on EH&S side.
Check the Application log for errors as well - there might be more details in there.
Greets
Mark

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03" available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
Does that mean, that the 7.7 Version is official supported for Production?
Searched the Notest but found no answer for that.
Ulrich
... half an hour later ...
just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
could that be the answer?
Ulrich
Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

Hello Ulrich,
Please refer at SAP link http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
< service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
   Select in MAXDB section u201CWINDOWS SERVER...   u201C >
< according PAM :
MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for
SAP CONTENT SERVER 6.40 >
As you know the SAP installation guide for Content server is available at::
service.sap.com/installations -> SAP Components
->SAP Content Server -> Release 6.40 and higher
< Installation - Standalone Engines >
For additional information and documentation please go at SAP link:
http://service.sap.com/ContentServer
-> FAQs SAP Content Server
Thank you and best regards, Natalia Khlopina

Apache start error on SAP Content server 6.40

Hi all
I installed a SAP Content Server 6.4 successfully in Solaris 10 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
dmscs/bin>./apachectl start
Cannot load /usr/sap/XXD/apache/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal:sap/Apache/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
./apachectl start: httpd could not be started
let me know to solution if you had experienced with the same problem.

Hi Nelis,
We did the module registration after after installation, Please find the below of httpd.conf.
=======================================================================================
Example:
LoadModule foo_module libexec/mod_foo.so
LoadModule sapcs_module libexec/mod_sapcs.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module         libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module        libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module      libexec/mod_status.so
LoadModule info_module        libexec/mod_info.so
LoadModule includes_module    libexec/mod_include.so
LoadModule autoindex_module   libexec/mod_autoindex.so
LoadModule dir_module         libexec/mod_dir.so
LoadModule cgi_module         libexec/mod_cgi.so
LoadModule asis_module        libexec/mod_asis.so
LoadModule imap_module        libexec/mod_imap.so
LoadModule action_module      libexec/mod_actions.so
LoadModule speling_module     libexec/mod_speling.so
LoadModule userdir_module     libexec/mod_userdir.so
LoadModule alias_module       libexec/mod_alias.so
LoadModule rewrite_module     libexec/mod_rewrite.so
LoadModule access_module      libexec/mod_access.so
LoadModule auth_module        libexec/mod_auth.so
LoadModule anon_auth_module   libexec/mod_auth_anon.so
LoadModule dbm_auth_module    libexec/mod_auth_dbm.so
LoadModule digest_module      libexec/mod_digest.so
LoadModule proxy_module       libexec/libproxy.so
LoadModule cern_meta_module   libexec/mod_cern_meta.so
LoadModule expires_module     libexec/mod_expires.so
LoadModule headers_module     libexec/mod_headers.so
LoadModule usertrack_module   libexec/mod_usertrack.so
LoadModule log_forensic_module libexec/mod_log_forensic.so
LoadModule unique_id_module   libexec/mod_unique_id.so
LoadModule setenvif_module    libexec/mod_setenvif.so
Reconstruction of the complete module list from all available modules
(static and shared ones) to achieve correct module execution order.
[WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_sapcs.cpp
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_log_forensic.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
Can you guide me where exactly point to the correct location for /ContentServer/ContentServer.dll in httpd.conf.
=========================================================================
#<VirtualHost *:80>
   DocumentRoot /www/docs/dummy-host.example.com
   ServerName dummy-host.example.com
   ErrorLog logs/dummy-host.example.com-error_log
   CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /export/home/sapcs1/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 9:05 AM
Edited by: kumar panu on Sep 7, 2010 9:07 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM

Installtion of SAP Content Server 6.40 on Solaris

We are planning to install the SAP Content Server 6.40 on Solaris10 release 09 on SPARC Server. I have gone through the installation guide as well.
Kindly confirm the below steps are correct, if I am not wrong.
1.     Pre-Requisities
u2022     Create Group and User.
u2022     Create file system system.
2.     Extraction of source code
u2022     sapcs:~$ gunzip < httpd-2.0.62.tar.gz | tar xvf u2013
3.     Configure APACHE Source to Solaris platform.
u2022     sapcs:~/httpd-2.0.52$ configure u2013prefix=/usr/users/sapcs u2013 --enable-mods-shared=most u2013with-mpm=prefork
u2022     Go to /conf Directory open the httpd.conf change user, group and Port.
u2022     $sapcs:~/bin$ apachectl start (start webserver)
u2022     $sapcs:~/bin$ apachectl restart
u2022     $sapcs:~/bin$ apachectl stop
u2022     Create soft link home
4.     install
u2022     sapcs:~/httpd-2.0.52$ make
u2022     sapcs:~/httpd-2.0.52$ make install
5.     Then start installation of SAP Content Server 6.40
u2022     ./sapinst (SAPinst from the Installation Master DVD)
Kindly let me know if i have missed any activities..
Regards,
Panu.

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

How to save .JPEG Image on SAP CONTENT SERVER?

Hi,
        I am working on online interactive form where i am getting scanned signature as .JPEG image that i want to store on SAP CONTENT SERVER. I am using webdynpro abap tool for application developement .
        Please guide me . Thanks in advance,
Saurin Shah

Hi
You can do it but there is one very critical exception to do it depending on the Webserver that you are using :
1. Is you are using Sunone Webserver then you cannot install multiple instances of CS on the same webserver instance.
And if using IIS then the only thing that you need to do on the webserver front is to restart the Webserver after the second instance is installed so that the webserver picks up the config entries made for the second instance's install.
With Apache webserver you will have make the entry in the httpd.conf for the second instance as you had done for the first instance
Eg for this is :
This is my first instance:
LoadModule IdcApacheAuth "D:/oracle/ucm/cs2/shared/os/win32/lib/IdcApache22Auth.dll"
IdcUserDB cs2 "D:/oracle/ucm/cs2/data/users/userdb.txt"
Alias /cs2 "D:/oracle/ucm/cs2/weblayout"
<Location /cs2>
     Allow from all
     Order allow,deny
     DirectoryIndex portal.htm
     IdcSecurity cs2
</Location>
This is my second instance:
LoadModule IdcApacheAuth D:/oracle/ucm/idc1/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB idc1 "D:/oracle/ucm/idc1/data/users/userdb.txt"
Alias /idc1 "D:/oracle/ucm/idc1/weblayout"
<Location /idc1>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc1
</Location>
Hope this helps
Thanks
Srinath

Archiving production orders by SARA Trx

Hi Gurus.
I want to archive a production order by SARA trx.
The object used is PP_ORDER.
The program used by SARA only archives a Production orders with I0013 status and in the PORDARCH table ( used by this program ) hasn't this status.
The production order is deleted marked but in this table ( PORDARCH ) only is the status I0076.
How I can to archive this production order?? How I can to change the status to I0013??
thanks a lot
Ismael

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCPP/CAARCPP.pdf

SAP Parameter Recommended note for SAP Content Server 6.40

Hi..
we are planning to installation of SAP Content Server 6.40 with SAP MAXDB 7.6 on Solaris, Kindly provide what are the recommendation need to perform before installation of Production system.
Like IO Buffer Cache[MB] , Number of Sessions or any SAP Parameter Recommended note for SAP Content Server 6.40 with SAP MAXDB 7.6.
Regards,
Panu

Hello,
Did you already check the preparations and parameters in the SAP CS 6.40 installation guide ?
You can find topics in the Installation Guide like :
- Planning and Sizing of the Database Instance
- Preparations
For more in depth tuning also have a look at the following document :
Operational Guide - SAP Content Server
This document contains the complete list of Content Server parameters.
Success.
Wim

SAP Content Server Archiving strategy

Hi,
I have installed ECC 6.0 SR3 and SAP Content Server 6.40 recently. Content Server is contains only scanned copies. I want to propose archval strategy for the Content Server.
Any body has document for the same please let me know.
Thanks in advance

hi,
Archiving,
There are both technical and legal reasons for archiving application data. Data Archiving:
· Resolves memory space and performance problems caused by large volumes of transaction data
· Ensures that data growth remains moderate so that the database remains manageable in the long term
· Ensures that companies can meet the legal requirements for data storage in a cost-efficient manner
· Ensures that data can be reused at a later date, for example, in new product development
please refer this thread
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8d/3e4c11462a11d189000000e8323d3a/frameset.htm
Benakaraja
??P
Edited by: benaka rajes on Sep 10, 2009 6:09 PM

PRO_E (PTC Server) insted of SAP Content Server.

Dear All,
I have a scenario here,
The client is using Pro-E as a design tool for the engineering department and simultaneously saving the files in PTC Server, which is again a product of Pro-e.
This is now a huge server with lot of data.
The client don't want the data to be replicated once again in the SAP Content Server, So we were planning to go for an external link concept.
I want to know now,
1. After creating a DIR, can i link the file as original which is residing in PTC Server, not by pushing it to the any of the storage category.
2. Do i require any Adapter to enter the PTC server for attaching the file.
Best Regards,
Ravi K BIlla

Hi,
the scenario you described is for sure not the best way to handle CAD data.
I know that PTC use Pro/Intralink to stores the originals. If so, there are standard interfaces available to Pro/Intralink (www.innoface.de).
The other possibiltiy is to use the direct integration (http://www.riess.de/EN/index.html). This is the prefered solution of SAP and ensures one central database without inconsistent redundencies.
Regards
Thomas

Archving production order in sara - sap content server

Similar Messages

Maybe you are looking for