Archwiki printable version problem

Hello,
i have this nasty problem from some time, that when i click on "printable version" page stays the same only link to printable version is not staying.
I am using Firefox 14

Ah yes: when you click it, the link 'printable version' simply disappears - weird.
You may want to open a bug report for this.
Last edited by karol (2012-07-23 13:13:23)

Similar Messages

Is there a way to create a printable version of my iWeb built website before it goes offline in June when apple stops supporting mobileme?

Is there a way to create a printable version of my iWeb built website before it goes offline in June when Apple stops supporting mobileme?

Why not move your site to a new host and publish using one the two alternative methods...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

A solution for Secure Static Versioning problem in 1.5.0_10

Hi,
I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
My test computer:
- Windows XP sp2
- Internet Explorer 7 (on another computer also IE 6)
- Firefox 2.0.0.1
- JRE 1.3.1_09
- JRE 1.5.0_10
I. Solution for Internet Explorer 6 and Internet Explorer 7
1. Edit registry and add:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
DWORD: EnableSecureStaticVersioning = 0 (Hex)
2. Restart browser if started.
3. Start web page with java applet.
II. Solution for Firefox 2.0.0.1:
1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
3. Restart browser if started.
4. Start web page with java applet.
Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
Hope this helps,
Grofaty

I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
Thanks,
Adunlow

How to open a "printable" version of a pdf file which has embedded a swf file?

I've got a project that consist of a pdf file that has a swf inside, it's all managed by a .nav file, a navigator.
The thing is, since the Flash Player is not a part of the pdf file (I think it was a part before), and it has to be downloaded and installed separately, I need to have an option for the users so they can access a more compact and printable version of what the pdf shows, but this time, not using the swf but the alternative, printable, version.
I spent some time looking for this "printable version", but no luck so far, if anyone knows something about it, I would greatly appreciate it.
Thanks.

I see, I didn't know the exact term of what it's called, I've read somewhere and some people refer to it as interactive statements, the project is made with Flash Builder and I use the asset placement plugin. I'm a long time as3 programmer, but I never used a swf file within a pdf.
So, you are telling me that there is no way to have a default fallback option to show, let say, only text when the flash player isn't available?, because, a client of mine told me that he saw once a video showing Adobe featuring a "printable version" of the same pdf when that condition happened. He didn't send me the link or anything, I guess I just need to believe him on that one.
Any help, documentation to read, or orientation would be appreciated.
Edit.: forgot to say, mobile is not an issue/option here, this app or portfolio would play only in desktop.

Version problem in DMS

Hi All,
In DMS
When i create a document with bapi_document_create2 it is creating the document with what i have given the inputs
documentnumber
documenttype
documentpart
documentversion
but version problem is there . Ex: if i give version as 03 but is creating the docuemnt with version from 01 . next if i give 10 as a version it is creating the document with version 02...like that..
Please advice me .. i want to create the document with the version what iam giving.
Regards,
RSK

Hi,
Transaction Code: SE18
Selecting the radio button "BADI name" and enter "DOCUMENT_NUMBER01" in the text box to right to see the definition.
The method is: DOCVERSION_CHECK
Hope this helps.
Regards,
Benu

Labview version problem?

Hello guys,
I have made a subVI that controls the rpm % of a wind tunnel vane. This consists in adquiring 2 values of data within 30 seconds and compare both to see the uniformity of the flux. I use a Labview 2011 version. The problem occurs when i use this subvi in a 2012 version. The 30 seconds turn to 1 minute... I want to ask if its possible for this to be a version problem.

I'm concerned that you are reading a file and then reading it again 3 seconds later. This tells me you are looking for when the other process stops writing data. File IO is a terrible way to share data. Use a Notifier or Queue instead. Much more efficient.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

OCCI version problem

Hi,
I am having a version problem with 9i.
How can i compile OCCI with 9i database installetion?
Which library would i need?
my server is a SOL-Sparc-64 machine
and oracle database server is installed there versiion oracle 9i 32bit.
I tried to compile but it gives me error like....
Undefined first referenced
symbol in file
main /usr/local/lib/gcc/sparc-sun-solaris2.9/3.4.2/crt1.o
__1cG__CrunKpure_error6F_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdbC__RTTI__1nDstdMlength_error__ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMout_of_range2T6M_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mpkc_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cG__CrunIex_alloc6FI_pv_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cG__CrunIex_throw6Fpvpkn0AQstatic_type_info_pF1_v_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mrk1_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2t6MpkcIrkn0C__v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cH__rwstdRexcept_msg_string2t6MIE_v_ /data/Indranil/prasenjit/clientlib/libocci.so
Please tell me how to do it.
Edited by: user652233 on Oct 16, 2008 1:18 AM

Hello,
I am trying to compile my C++ code (using OCCI) on Sun Solaris 5.9 (SPARC64PLUS) environment.
We have compiled and tested it on RHEL 5 Linux.
The Oracle (10g R3) database is on RHEL 5 server while OCCI/C++ application would be running on Sun Solaris 5.9 server.
Since we have no Oracle installation on the Sun Solaris 5.9 server, there are no OCCI related libraries on this server and hence we are not able to compile our C++ code on Sun Solaris 5.9
Can someone help me on how/where to download OCCI libraries (compile time as well as run time) for Solaris 5.9 ? I could find only Windows and RHEL versions of OCCI libraries on the Oracle website.
Also, how stable is OCCI on Solaris 5.9 ?
Regards,

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

Printable version

Hi All,
I want to put a feature of printable version on my webpage can any one of u pls tell me how can this be .. done using jsp ..
Thanks in Advance

It depends on what the difference is between the normal version and the printable one.
If the normal has menus and stuff like that that you don't want to printable version then include the content and the menus separatedly.
Then you can have separate JSP that will be called by a "print" button, that will open an alternative verion that only includes the content of the current page but not the menus...
Else it can be the same JSP that accepts a parameter and displays some things or others (and maybe even different formatting) depending on whether you are on normal or print version...
Hope that makes sense..

Service pack versioning problem

Can anyone help me solve service pack versioning problem please. This
problem may solve some of my other problems.
I am trying to check if my service pack has been installed properly or not.
I issue following command from command prompt:
C:\>java weblogic.Admin t3://localhost:7001 VERSION
I get the following error: "Failed to connect to t3://localhost:7001 due to:
[java.net.ConnectException: No server found at T3://localhost:7001]"
At this time, I have weblogic 5.1 installed with service pack 2 installed.
If I run server seems to be running, and connecting to my
database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

Thanks Mike, you are right. The server was not running while I was testing
service pack test.
And service pack is installed. Thanks
WLAS5.1 does not run once I change JAVA_HOME TO "C:\jdk1.3.0_02", that
where I have jdk1.3
I get following error message:"wlserver.exe has generated error and will be
closed by windows. You will need to restart the program."
John
"Mike Reiche" <[email protected]> wrote in message
news:3ac8fe17$[email protected]..
>
1) You WLAS does not seem to be listening on port 7001 of your
localhost. Is it listening on a different port? Running on a
different machine?
2) What error message do you get when trying to run WLAS with
JDK 1.3? WLAS does definitely run with JDK 1.3
Mike Reiche
"John" <[email protected]> wrote:
Can anyone help me solve service pack versioning problem please. This
problem may solve some of my other problems.
I am trying to check if my service pack has been installed properly or
not.
I issue following command from command prompt:
C:\>java weblogic.Admin t3://localhost:7001 VERSION
I get the following error: "Failed to connect to t3://localhost:7001
due to:
[java.net.ConnectException: No server found at T3://localhost:7001]"
At this time, I have weblogic 5.1 installed with service pack 2
installed.
If I run server seems to be running, and connecting to my
database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

Printable version of my portlet page (can't use jasper)

I am developing a portlet and I need to show a window (preferably a popup) with content in a printable form (no colors, Portal heading etc).
My App is running as a part of Sun Portal 7 deployed on Sun One Web Server 6. I can't use JasperReports, because I am not allowed to modify server.policy.
The data I will be printing are quite simple. How can I show them in a printable format? I can use HTML or MS Excel format only (yeah, but you know...).
Is there a way how to achieve this? I was thinking about making a servlet and passing the data to it. But a Portlet version would be great :)

That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can keep an eye on this thread:
*[[/forums/contributors/707748]]

Oracle IDS Version problem (IDS is not compatible )

Please address my technical query mentioned below.
We are facing problems while porting/deploying our application on the Oracle 10g application server.
The application server version is 10g R-2 (64bit)(10.1.2.0.2), the IDS version is 10g (9.0.4) and OS is HP-UX 11.23.
Earlier when I tried doing the IDS installation, the pre-installation check failed saying that the OS is not supported, the supported OS version for IDS 10g-9.0.4 was HP-UX 11.00 & 11.11. I then bypassed the pre-installation check using the -sysPreRequisite option of the runInstaller same and the installation succeeded.
The forms even got compiled but when I tried to execute the forms from the browser, it throws the error message number FRM-40011, which says that the form was created by an older version of the form builder.
This was the problem we have been facing since the start even when we have done installtion on other site, and even though we had installed the application server and the IDS afresh, the same problem persists. The only thing I can conclude from the above is that the IDS is not compatible with the current version of the OS/Application server and we need to upgrade to IDS 10g so that it works on HP-UX 11.23, with Oracle Application Server 10g R-2(10.1.2.0.2).
Kindly provide your technical support in the above matter and supply us the correct version of the Oracle 10g IDS.

I can't even understand this reply; unless I can do it with one single click, it's not good for me! I have always been Firefox user but right now I regret updating to 5.0!

XMl parser version problem for running struts project in jdeveloper 10.1.3

Dear All.
I am trying to run a struts (v 1.2.9) based project in Jdeveloper 10.1.3.1.0.The struts version in Jdeveloper is 1.1.
when i am trying to run the index.jsp i get an error:
org.xml.sax.SAXNotRecognizedException: http://apache.org/xml/features/validation/dynamic
I think the XML parser version is a problem.Jdeveloper has OracleXMLParser v2 and i think the XML Parser apis used in building the project is different.I have placedcustiom xml parser apis and the xerces.jar in the jdevbin/jdev/lib folder and included these jar in the bootclasspath as follows:
AddVMOption -Xbootclasspath/p:../lib/xml-apis.jar
AddVMOption -Xbootclasspath/p:../lib/xerces-2.6.2.jar
But even then the Exception persists.Is the syntax for Xbootclasspath wrong or i need to place these custom api's in some other location of jdev.
I am not being able to figure out the XMl parser problem.
Any help wud be great.
Is it that i cant run the project in jdeveloper.Just to mention the application is deployed in OC4J on the server and runs fine..But its only that i kant run it locally through jdeveloper

I am also facing the same issue on my laptop. I searched for forum but no luck.
appreciate if anybody can throw some light on this.

SMP 2.3 Agentry update versions problem

Hi,
please I experienced issue when deploying new version of Agentry application to SMP 2.3. On devices we have stable old version. When we deploy new version through SCC on SMP and then we try to transmit device , it freezes on "Sending client info" . But in SCC it is running normally (e.g. when we reinstall client on device or reset ATE, it downloads new version with no problems).
Our steps are::
Deploy version 1
Make initial sync.
Deploy version 2
Make delta sync.
Expected result: new ersion is downloaded with delta sync correctly (currently we get freeze on “sending client info”).
Thank you for any help
Martin

Hi Steve,
we use Agentry_6.0.30 and I am talking about Application Logic release.
Thank you

How can I fix this "Adobe two-version" problem, so only the latest version stays enabled, the old version stays DISABLED, and/or uninstall the old version?

I went to my add-ons tab, and I DO, in fact, have two versions of shockwave flash, an 11.9...version, and a 13.9..., which, if I'm not mistaken, is the latest version. There is a "ask to activate, always activate, never activate" button for EVERY add-on. I clicked never activate on the older version, and closed the tab. I then tried to play a video off of the Web. It would not play, I tried another site with the same result, so I went back to my add-on tab, and the button for the older version had changed back to "always activate" by itself. It continues to repeat this, and WILL NOT stay on "never activate". Every few times I return to the add-ons page, THE NEW VERSION IS DISABLED, AS WELL AS THE OLD ONE. I've tried to uninstall the old version, but when I go through control panel, and bring up the folder contents, the old version isn't even there! I've done start, find, and typed in "Adobe", and the old version is NOT FOUND! Both versions keep changing back and forth on the activate button, and they both will disable on their own, no matter how many times I fix it! smh!!

@jscher2000: Didn't mean to lose contact. I still don't have my playback problem solved, if you can believe that. I've downloaded the uninstaller / installer links with someones help that's on this forum, used them in the exact same order. It did nothing to help. However, I was in the process of attempting your solution. I made sure all browsers were closed; in fact, I went offline before this procedure. When I used find, and typed in Shockwave, it came back..."no search results". I recalled a path I had previously used, and had to use it instead of find, C:/ Acer/ Windows/SysWOW64/ Macromed/ and here there were files for Shockwave AND Flash. I opened Shockwave, says " this folder is empty". Flash Player and Flash Util plugin, Util32 Active X, NPSWF32_13_0_0_214.dll...all files appear correct, BUT why aren't there ANY files in the Shockwave folder? NONE of the buttons you describe in your steps to let Firefox "clean up" the pluginreg.dat file show in my window...if I am in the right window. My username is at the top, and it's drop-down is "3 button"+sign out. One says settings, but it doesn't take me to any "help", Trobleshooting info, "show folder", nor any way to exit Firefox or to start it back up. Settings goes to "edit settings", and has a list of checkboxes...all with something to do with threads in one aspect or another, and one concerning private messages. Sounds to me like I don't know what I'm doing, am on entirely the wrong Mozilla /Firefox page, and I'm NEVER, EVER going to get this damn video playback crap fixed once and for all. Some sites will let a video play, but they are rare. Vikings.com is the one that has me red-faced. NOTHING plays there. Except ads, of course. You can't get those to STOP.

Archwiki printable version problem

Similar Messages

Maybe you are looking for