Arctic Cooling NV Silencer 5 on NX6800-TD128?

Will it fit or will i face any problems if i buy that cooler? Any tryed?
If any here got that card and that cooler:
-A lot more quite(probable spelled wrong, but less noise)?
-Got any cooler?
NX6800-TD128
Artcic Cooler NV Silencer 5

this cooler is for NVIDIA Geforce 6800 series, which mean it will fit with NX6800-TD128 without any problem.

Similar Messages

Arctic Cooling VGA Silencer + Zalman CNPS7000 = Fit?

I'm thinking about getting an Arctic Cooling VGA Silencer for my Hercules 9800 Pro, but I was wondering if the back piece really fits between the AGP card and the Zalman CNPS7000. Right now my gfx has the special stock cooling on, a.k.a Hercules-style with copper RAM-sinks and a copper heatsink for both the front and the back (back of the card, that is) of the GPU. It's a pretty tight fit to get my SATA cable through them.
Will it fit?
I'm also wondering if the VGA Silencer fits on my card? It does have non-stock cooling, but it's the same layout if you remove the heatsink and RAMsinks.

How about the Zalman ZMHPOPH80blablabla thing. Does it fit? It'd be nice to have to zalman coolers

Arctic Cooling ATI SILENCER 4 (X800)

What does you guys think of this one? Arctic cooling Will it cool better then the original cooling? And does it cool the memory as well?
And also.. To take away the original cooling can I just screw away the screws at the backside on the card? Or what do I have to do?

ok I will do that but I dont think I buy the arctic cooler because http://www.inwarehouse.se dont have it .. And I f I order from somewhere else I have ti wait for lika a month, and Idont want to do that

NX8600GT-T2D256E-OC and Arctic Cooling NV Silencer Rev.5 ?

I Have NX8600GT and its standart cooler isnt enough for OC. And i wanna buy a new VGA Cooler for it. Is NV Silencer R.5 compitable with it ? Or is there any vga cooler compitable with NX8600GT?
Thanks..

Each VGA Cooler providers has own compatibility list, so go and check it.

Arctic Cooler Silencer 1 for Radeon 9800

Anyone know where I can find a Arctic Cooler Silencer 1 for Radeon 9800? Or do you know if the Acceleron s2 will fit in a G4 Sawtooth with this v card?
Thanks

Hi-
Just don't let the fan get dirty. The 9800 is a hot card, and too much heat is bad. Since you also have a processor upgrade, you are adding lots of heat. The heat also affects the PSU, because it is all removed through the PSU, and hot air doesn't cool well. Hot PSU's, don't produce good power.
Another cooling option (and a good one) is a PCI slot fan that exhausts to the outside of the tower.
This Thermaltake has really good airflow, and will help cool your entire system.

Stock fan problems, Arctic Cooling Silencer Ultra 64 and MSI Neo4 Platinum

Hi,
A few days ago, the stock-fan of my Amd-64 CPU(+3000) started to running at 4500-5000 rpm at default speed, when before it had always done at 3000-3300. (official maximum stock amd-fan speed I think). To avoid so high and noisy default speeds, I have activated “Smart CPU Fan Target” in Bios to keep CPU under 50 º C and obviously now speeds are much lower. It helps to diminish the noise and to minimize the fatigue of fan, but obviously CPU run hotter. Even though I think it is in a safe range of temps (40 – 50 ºC). Nevertheless I’m worried about the odd behaviour of stock fan and what could happen in the future...
I wonder what could be wrong, cpu-fan, motherboard regulation cpu-fan system.
NB fan seems to work as always, running at 5000 rpm as ever (speed regulated by fan-mate 2). Not change is noted about.
I should aprecciate any suggestion about what is wrong ?
On the other hand, I have thought to substitute the stock-heatsink+fan by Arctic Cooling Silencer Ultra 64. But I have some doubts about it.
Does it fit in a Neo4 MB ?
I wonder if is possible to control the speed of Arctic Cooling Silencer Ultra 64 (not TC model) by Bios or under Windows via Core-Center as stock-cpu-fan is?
If anyone was so kind to help me.
Thank you very much,
M. Lin.

Quote from: TheBigMan on 03-July-05, 03:45:08
One idea is, try to disconnect your current HSF and see what happens.
I think nothing will happen because there is no alarm for it in this board...
Be well....
Thanks for the idea, but I think that it would be more prudent to wait for views about, of some owner of cpu-cooler-fan (thermal regulated or not), witch being set to start to turning at very low revolutions (ie:0--500) when computer power on.
Quote from: ellveez on 03-July-05, 09:05:19
I have the "no TC" version of the cooler. Maybe you missunderstood me. The mobo can controll the speed of the hsf. I can watch (with Everest 2.01) that it controls the speed between 2300 an 2000 rpm. The only thing i can't watch and therfore cannot confirm is how low the speed goes under 2000 rpm. Everest shows nothing when the speed goes under 2000 rpm and the core center tool from msi shows only "low", but no digits. Im sure, the fan turns with less than 2000 rpm but i don't no whether with 1500 or with 1900 or such. I can only confirm that the cooler is very silent when it turns with less than 2000 rpm. Then i dont hear the cpu-fan but only the other fans of my system (gpu, northbridge; five 80mm Papst Case fans). The Pabst fans stock rpm ist 2000 but i regulate them down to about 1300-1500.
For the northbridge i remove the stock cooler that turned with 8000 rpm. Now i use a Titan Copper VGA Cooler, TTC-CUVAB/RHS. The stock rpm of this cooler is 4500 rpm. I use the small Zalman Fan Control for this one to regulate it down to 3200 rpm. Measured with a temp probe the temp of the northbridge is now at 45 to 50 degrees C. I think thats a good compromise between heat and noise.
Yes, excuse me, at first I had misunderstood you. I interpreted that your cpu-fan was unable to turn under 2000 revolutions. I means only could be regulated between 2000 and 2300 rpm. But now, I'm quite sure what you means. Your tell me that the speed of the your cpu-fan is adjustable in all its range, from 0 to 2300, only that when it turns at least of 2000, the rpm reader programs are unable to report the speed. ok?
Quote from: ChakkaSol on 03-July-05, 10:19:11
M Lin, why r u so set on this silencer product....here is a madshrimps review on a64 heatsinks. I would go with the xp90 for the same price or less. The link is here:
http://www.madshrimps.be/?action=getarticle&articID=224
Thank you for your advice, I already knew it was a poor performer compared to what you refer me, but, firstly, I have a chronic immune illness due which I suffer some disabilities that makes difficult to do manual labours myself . Second I use my computer for office-surfing-programming purposes. So my power needs are low, -I own a +3000 amd-64-, compared to most of you, I think (I’m not doing over clocking too).
To sum up, I’m going to pick this cooler (fan+heatsink) because is as easy of installing as stock one, enough to cool my cpu... (slightly better than stock one), and very cheap in my country. There is no more reasons to choose it.
A lot of thanks to all.

MSI NX6800-TD128 Vs MSI K7N420Pro

I got myself a new graphics card today.
Unfortunately everything has not gone that well. Once I installed the new graphics card I noticed a distorted image on the BIOS boot up screens:
Some of the characters would blink.
Strange flickering lines (always on the same areas)
Once I booted up Windows I had similar problems with flickering lines and flickering lines of blocks.
I tried installing the drivers but I the computer would black screen and stay there.
Does anyone have any ideas? Incompatibility with the motherboard? Faulty graphics card? Power supply?
Thank you.

Hi guys.
The NX6800-TD128 does not have a particularly big cooler so it fits in perfectly.
There is no cap immediately in contact with the card but I guess they are within ~4mm.
The power cable is inserted into the card.
The monitor cable is fully inserted and I've also tried using the DVI socket with the converter but that gives me the same problem.
I was previously using the onboard video.
I did remove the drivers and run DriverCleaner to remove all traces of the drivers. I don't think it's a driver issue as the problem also occurs on the screens prier to Windows loading. I did read somewhere that the drivers can tell you if your card is not getting enough power so I tried to install the latest WHQL drivers from nVidia's site but unfortunately Windows would black screen and stay there.
I did not add (or remove) anything, including RAM, when I first inserted the card.
I've since removed every PCI card and every drive to limit the power use/conflicts but that has not helped.
Now for the bad news (for me) (I'm worried you guys are going to say that this is the problem and that I'm going to have to go out and spend £50 on a high end PSU):
I've tried two PSUs (they produce slightly different distortions but they both produce them).
Q-Tec
"550W PSU"
+3.3V@20A (Max, (Peak=30A)
+5V@35A (Max, (Peak=40A)
+12V@14A (Max, (Peak=20A)
AOpen
300W PSU
+3.3V@28A
+5V@30A
+12V@15A
(+3.3V&+5V=180W Max)
(+3.3V&+5V&+12v=280W Max)
Best regards guys.

On the Arctic Cooling site what is AIW?

I looked at Arctic Cooling's ATI Silencer 5 (Rev. 2) and it said that it would work on all version of x800 except for AIW. I have never heard of AIW before. Can someone clue me in to what that is so that I am sure to buy the right thing?
Here is the product page:
http://www.arctic-cooling.com/vga2.php?idx=61

That's right, I have heard of that model before.

K9n platinum compatible with arctic cooling freezer 64 pro?

I'm picking up the X2 6400+ black edition and I was wondering if the arctic cooling freezer 64 pro is compatible with the K9N platinum.

This is the kind of simple query that Google can answer very easily
http://www.arctic-cooling.com/cpu2.php?idx=80
Quote
Application:
Up to 130 Watts
AMD Socket AM2+, AM2, 939, 754
- All Athlon 64 X2, Athlon 64
- All Athlon 64 FX, Sempron
- Opteron

Will the Arctic Cooling Accelero S2 fit well into the G5 case?

Before I buy Accelero S2 I would like to know if anyone has had success installing one of these in a G5. When I went to a forum to read about them everyone was putting them into PCs so it would be comforting to know if G5 users had success as well.
Also if the product is listed under VGA does that mean it won't work on a DVI graphics card? I heard that DVI is a more advanced version of VGA does that mean that both VGA and DVI would be compatible with the Accelero S2? I am pretty sure that they usually have DVI and VGA both available on most graphics cards so it seems like it would be a non issue.

Do you have room to allow it to fit? It works in Mac Pro which uses PCI Express, and VGA is just any video graphics card.
http://www.arctic-cooling.com/vga2.php?idx=147
See the pdf "Please check your card with the height restriction drawing to assure compatibility."
Photos of installation on Mac Pro with Nvidia 8800GT or 3870:
http://www.xlr8yourmac.com/Graphics/8800GTAcceleroS1/8800GTAcceleroS1R2.html
Or this:
http://www.xlr8yourmac.com/Graphics/8800GTThermalrightHR-03.html

MSI NX6800 TD128 and Garbage Characters

Purchased an NX6800 TD128 on Saturday. Put it in the machine last night and all I get is garbage characters flashing on the screen
The Windows XP logo appears after a few seconds, this time with flashing green lines down the screen. The machine then either hangs with white flashing characters onscreen, or it reboots. If it reboots, same happens again. The spec is ...
Athlon XP2600
1Gb RAM
1 x DVD writer
1 x DVD ROM
2 x 160Gb Western Digital HDD
480w Tangen power supply
I put the old GeForce FX 5200 back in and it all works fine. Any ideas folks? Looks like it's a dead one to me

Hi retro-squirrel
One thing you should know before you post a problem is to give a more precise signature . If you don't give the max amps of your PSU (3.3v/5v/12v), make and type of ram (preferably with lat & cas), most of the moderators won't bother answering. I would imagine they are sick of telling people to make more informative signatures . Here is a link to give you a hand...
Suggestions on posting and getting better answers
This is from GlennVidia who is one of the mods from this area, if you fix up your sig he may be able to steer you in the right direction. He is very knowledgable and extremely helpful . I'll pop back later to see how you are going. Hopefully you don't have to RMA that card of yours.

NX6800-TD128 DVI-D problem

Hi !
I am a happy owner of ay MSI NX6800-TD128, which I have a problem with. When I connect it through the normal D-SUB cable (normal vga cable, everything is fine).
BUT when I am trying to connect it with the DVI-D cable, which is the purpose why I had bought it along with the 23 col BENQ LCD, there is no signal.
I had tried to manually change the Input source as well,but no luck.
The solution should be siple, could somebosy help me out please ?
HOW CAN I TURN ON THE THE DVI SIGNAL ?
Many thanks,
Moore

Test 1: Get another LCD monitor with DVI connection and test it on this graphic card.
Test 2: Also, test the card on another monitor with DVI connection that known to work.
If test 1 fails, return the graphic card.
If test 2 fails, return the LCD.

NX6800 TD128 problem

I bought a NX6800 TD128 about 3 weeks ago.
As soon as i had installed it I put doom 3 staight onto my machine, so that I could test how fast it was. But It wasnt great at all first thing what happened, As soon as i had started the game, was that the whole screen divided Up into small black triangles and flickered like mad . this only happenes If I am moving thou. If I don't move my charecter in doom 3 everything is great but If I start to move the whole monitor flickers. This doesn't only happen with Doom 3 but with XIII or Prince of Persia the Sands of Time. But with the latter two games It isn't so bad with PoP It hardly ever happenes (the flimmering) and with XIII It only happenes In outdoor leveles. But doom 3 Is horrible. I have already installed all the newest drivers for the VGA card (forceware61.77) and I've also got the newest ones for my motherboard (asus A7N8X) And I#ve got SP2. I'm not quite sure if my powersupply is good enough thou. It says It has 500watts butt in real life it only has 5v 30A 3,3 28 A an 15v A with 12v But that should do. I can't think thats the problem because I've already tested the Pc with all the extra bits like Cd drives and PCI cards unplugged and the flickering didn't change. what can I do ? Is my VGA card faulty or something ?
please help me
with regards x7aa1186

Quote
Originally posted by x7aa1186
If I would return it do you know if I can send it straight to msi, because I bought the VGA card in the UK and I live in Austria so it's a bit of a strain sending it back to the retailer.
Speak to MSI and ask them the best way to solve this problem.

Which thermal compound for a G4: Arctic Cooling MX-2, MX-3, or MX-4?

Thermal compound was mentioned at the below link:
[http://discussions.apple.com/thread.jspa?threadID=2613130&tstart=0]
Linked from that page was another web page, where the MX-2 thermal compound made by Arctic Cooling was mentioned. The below web page on the Arctic Cooling website mentions MX-2, as well as newer thermal compounds, MX-3 and MX-4:
[http://www.arctic-cooling.com/catalog/main.php?cPath=39]
Does anyone know which would be most appropriate for a G4 "Sawtooth"? According to the product descriptions, MX-3 is an upgraded version of MX-2.

Hi-
I'm using MX-3 now in all my G4s.
Previously, I used MX-2.
MX-3 is easier to apply, and definitely is more than good enough for any application you may have.
MX-3 outperforms AC Ceramique and requires no curing.
Ceramique receives a "Good" grade, whereas MX-2 (and MX-3 performs better) receives an "Excellent" grade:
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=150&Itemid =62&limit=1&limitstart=11
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=150&Itemid =62&limit=1&limitstart=12

NX6600GT Vs. NX6800 TD128 AGP 3Dmark05 results

Hi to all,
Can you please help me compare these two cards? How much difference is there between these two:
NX6600GT TD128 and NX6800 TD128 AGP in 3Dmark05?
Anyone tried them in 3ds Max?

I got a 3dmark05 score of 5499
Neo4 Plat
Venice 3000+ @ 2411Mhz (9 x 268)
MSI 6800GTO @ 410 core, 1050 mem
2 x Corsair CMX512 3200XL, dual-channel @ 200Mhz 2,2,2,5 1T

Arctic Cooling NV Silencer 5 on NX6800-TD128?

Similar Messages

Maybe you are looking for