ARD 2.2 Server and client - Installing package immediately fails everytime

Everytime I try to push a package...it immediately fails. I have been using Apple packages for updates and all users are administrators. I have all rights features enabled on the clients and the firewall is off. Can someone help me out on this one. There is no reason given in the results window why it is immediately failing...sometimes I will see the package copying over, but when it goes to install it fails.

I went through all the logs on both the client and the server and I do not see anything about a ARD installation failure...can anyone else help...
Thanks

Similar Messages

  • New Lion Server and Client install... what to expect?

    Ok, so in a week I have a Mac Mini Server and a classroom of clients to set up, image, OD master, connect to AD, manage prefs etc (If I had the choice, I wouldn't touch Lion for at least 6 months, but it's not a luxury I have).
    I have no AD system to test it with here, so what fun and games can I look forward to? Looking around, it seems that binding to AD is currently rather unreliable 

    The 3800 can handle MaxTurbo and TV.  You can feed your 5 TV Receivers over good quality RG59 or over Ethernet, or up to two may be connected via Wireless.  
    The preference is for Ethernet over Cat5e/Cat6 or Wireless.  Wireless is liked by installers because they don't have to run wires for them.  Ethernet is by far the best choice.
    Since the 3800 (or any U-verse RG) only has 4 RJ45 ports, you cannot connect all 5 TV Receivers directly to the RG via Ethernet, so some would have to move to a switch connected to the RG.  You need to be careful when mixing IPTV and general traffic on a switch, especially if you have a third party wireless access point or wireless router connected to that switch.
    Do be aware of the limitation of no more than 4 LIve HD streams coming into your home at the same time.  I mention this because you say 5 TVs.  You can view different programs on all 5 TVs, but some would have to be recorded.
     

  • Can I put both RMI server and client in a same program

    hi everybody...
    I wanna know that can I use RMI server and client in a same program....My idea is like that I wanna use the same program for client and server....When I open my program, I can accept connection from other program and if I want to connect to others, I can also connect it. I expect you to understand my question. Here are the sample code for my program...
    package Chat.Rmi;
    import java.lang.*;
    import java.util.*;
    import java.rmi.*;
    import javax.swing.*;
    import java.net.*;
    import java.rmi.server.*;
    import java.rmi.registry.*;
    public class netKitManager implements netKitInterface{
        public netKitManager(){
            try{
            reg = LocateRegistry.createRegistry(4242);
            reg.rebind("NetKitServer",this);
            }catch(RemoteException re){
        public void DirectConnect(String ip){
            try{
            netUser = (netKitInterface) Naming.lookup("rmi://"+ip+":4242/NetKitServer");
            JOptionPane.showMessageDialog(null,"Connection succeded!");
            }catch(NotBoundException nbe){
                JOptionPane.showMessageDialog(null,"There is no server at specified IP address!");
            }catch(MalformedURLException mue){
                JOptionPane.showMessageDialog(null,"IP adress may be wrong!");
            }catch(RemoteException re){
                JOptionPane.showMessageDialog(null,"Remote exception occured!");
        public void SendMessage(String msg){
            try{
            netUser.SetMessage(msg);
            }catch(RemoteException re){
        public void SetMessage(String msg) throws RemoteException{
            chatKit.SetMessage(msg);
        private netKitInterface netUser;
        private Hashtable netUserList;
        private Registry reg;
    }

    Yes it can be done. I have done it.

  • How to start oracle database server and client in windows 8

    Hi at all
    I'm a new entry in this forum and I'm a beginner with database oracle.
    I used always SQL Server as database and it was easy to use after installation.
    With SQL Server configuration management program I could to launch the SQL Server (SQLEXPRESS) service and the database server start up!!
    With SQL Server management studio I could to launch the client application, then was establishing a connection to the server and all was working fine!
    Now, how to work with oracle database?
    I installed oracle server and client version 11g R2 on windows 8, but how can I start the server database? .. and how can I start the client application for querying?
    regards in advance.
    P.S.: Sorry for my english. 

    SomeoneElse
    thanks for the response.
    I setting the service to start manually because otherwise windows is slow to startup.
    In particular I have precisely this oracle service on my operating system after installation.
    - ) OracleVssWriterSYSDBA
    - ) OracleDBConsolesysdba
    - ) OracleJobSchedulerSYSDBA
    - ) OracleMTSRecoveryService
    - ) OracleOraDb11g_home1ClrAgent
    - ) OracleOraDb11g_home1TNSListener
    - ) OracleServiceSYSDBA
    What are the services that start the server and I have to launch?
    What is the client program in menu --> start -- > all program --> Oracle - OraClient 11g home..... that I have to use for querying database?
    thanks.

  • CAD Server and Client Version mismatch

    Hi All,
    When we try to install fresh CAD client the version is different from the server. We are using 8.5.2a server and client shows 8.5.1. Any impact of this mismatch? How do we upgrade the client? Should we re-install the client?
    Regards,
    Adithya

    Hello,
    Anand is right but also you have to make sure that the server is willing to check the client for a update because you can turn it off or on, so in your case i think it is off.
    To turn it on you have to launch the postinstall on the CAD server , go to the services configuration , you will find there a radio button for : would you like CAD automatic updates enabled? you have to choose yes.
    In that case the Agent will check for a update when it is launched.
    Amer

  • 9i installation (network problem b'n server and client

    Hi
    I installed 9i in windows 2003 server and client system (win xp). I configured listener.ora file in server and tns.ora file in client mechine. while trying to ping (i.e tnsping) i m getting follwoing errors in both systems.
    C:\>tnsping tns_tekhub3
    TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-DEC-20
    06 11:28:25
    Copyright (c) 1997 Oracle Corporation. All rights reserved.
    Used parameter files:
    f:\Orahome92\network\admin\sqlnet.ora
    TNS-03505: Failed to resolve name
    C:\>

    Hi,
    i made chages in sqlnet.ora file.
    C:\>lsnrctl services
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 14-DEC-2006 09:23:
    04
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "tekhub" has 2 instance(s).
    Instance "tekhub", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Instance "tekhub", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1 refused:0 state:ready
    LOCAL SERVER
    Service "tekhubXDB" has 1 instance(s).
    Instance "tekhub", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: SERVER, pid: 3684>
    (ADDRESS=(PROTOCOL=tcp)(HOST=server)(PORT=1064))
    The command completed successfully

  • Try to use one comupter as both server and client

    Hello, everyone, I am just trying to use my own computer as both server and client to test some codes about networking. For example, use the sample code in java tutorial which is used to test Echo server(code is listed below). Is there anything I have to do to set my computer, such as set my hostname or something like that?
    I am a pure newbie. And the purpose of this question is to test some code including socket on one PC without connect to internet.
    I have tried to change the name "taranis" in the following code to the computer name of my own PC, but it doesn't work, and said: Couldn't get I/O for the connection to: (my computer name).
    import java.io.*;
    import java.net.*;
    public class EchoClient {
    public static void main(String[] args) throws IOException {
    Socket echoSocket = null;
    PrintWriter out = null;
    BufferedReader in = null;
    try {
    echoSocket = new Socket("taranis", 7);
    out = new PrintWriter(echoSocket.getOutputStream(), true);
    in = new BufferedReader(new InputStreamReader(
    echoSocket.getInputStream()));
    } catch (UnknownHostException e) {
    System.err.println("Don't know about host: taranis.");
    System.exit(1);
    } catch (IOException e) {
    System.err.println("Couldn't get I/O for "
    + "the connection to: taranis.");
    System.exit(1);
         BufferedReader stdIn = new BufferedReader(
    new InputStreamReader(System.in));
         String userInput;
         while ((userInput = stdIn.readLine()) != null) {
         out.println(userInput);
         System.out.println("echo: " + in.readLine());
         out.close();
         in.close();
         stdIn.close();
         echoSocket.close();

    Did you write the EchoServer and start it on your
    machine, listening on port 7?
    You can have the client and server running on the same
    machine or different machines, but they have to be
    separate pieces of software.
    Write a separate EchoServer class that starts up and
    listens on that port. Then start the EchoClient and
    make the connection.
    %yeah, I didn't wrote the EchoServer class. But I thought it is automaticly included and therefore has run once I start my computer.
    If I write a EchoServer class, then how should I set the host name of the EchoClient, just simply change "taranis" to my computer name (change "echoSocket = new Socket("taranis", 7);" to echoSocket = new Socket("(my comptuer name)", 7);"?

  • I am using server and client systems when i am trying to open the browser in two or more machines it says that firefox is already running, i want to open the browser in all machines simeltaniously

    I am using server and clients machines in my office, here i want to open browsers in all systems simultaneously but i am unable open the browser, when i am trying to open the browser in the second machine it says that firefox is already open... pls. solve this problem
    Thank you

    You can't open one Profile more than once. You need a separate Profile for each browser on each PC that you open.
    https://support.mozilla.com/en-US/kb/Profiles

  • Force CORBA server and client to localhost

    Hi,
    i have to run an omg corba server and client via orbd on a single machine with win xp. The machine is connected to the network, but this is not relevant for the corba communication.
    I can now force the orbd to start at localhost. After starting server and client everything works well until disconnecting machine from network, because client and server are started at ip of network card.
    How can i force the client and server to use a localhost port for corba communication (client and server)?
    Hope anyone has an idea...
    br
    ralf
    P.S.: If I start the applications after disconnecting network everthing works.

    Resolved the problem myself.
    The correct property is a java system property:
    com.sun.CORBA.ORBServerHost=localhost
    If you set this property in your application before instanciating an ORB, the orb will be forced to run on the set value (in this case localhost). If you do not set this property the ORB will be started at the IP of your network card if it is active (connected to the network)...

  • Connection fails if server and clients are in different subnets

    Hello,
    our Volume License Manager (v2.1) is running in another subnets than the clients (All machines are running under Windows XP-SP2 without Domains or ADS, just workgroups).
    The server is in subnet A (192.168.42.0/24), all clients are located in another subnet  B (192.168.50.0/24).
    Routing is properly configured and is working fine, traffic to the specific hosts is not blocked by a firewall. We can ping every machine,
    open telnet connections to the NILM, everything works.
    But if the clients try to connect to the remote NILM (both local client NI License Manager and VLM port settings are correct)  their connection attempt always
    times out with error code "NILM10"
    (I already read the mentioned KBs, no solution has helped so far). This is true if clients and server are separated.
    For testing purposes, i plugged one client into the server's subnet (server's IP: 192.168.50.250, client 192.168.50.10)
    and it worked perfectly. Is there a reason why  server and client have to be on the same subnet or is it some other kind of problem that I am not aware of?
    Thank you.
    Thorsten

    Hello Thorsten,
    Did you add the server's domain to the client computer's DNS settings. To do this, complete the following steps on the client computer:
    1. Open Local Area Network Settings from the Control Panel (Start»Control Panel»Network Connections»Local Area Connection)
    2. Click the Properties button
    3. Select Internet Protocol (TCP/IP) from the list of network components
    4. Click the Properties button
    5. Click the Advanced button
    6. Change to the DNS tab
    7. Ensure Append these DNS suffixes is selected
    8. Click the Add button
    9. Enter the domain suffix of the license server and click Add
    10. Close any open dialog boxes, choosing OK and Close as necessary.
    (http://digital.ni.com/public.nsf/allkb/3AAF37CD7B89A2CD86257070005A075A?OpenDocument)
    Further you should check this KBs.
    Why is My NI License Manager Slow or Not Responsive with a Configured Network Server on Another Domain?
    http://digital.ni.com/public.nsf/allkb/27D6BD8116EF257A862572F2005C2181?OpenDocument
    How Can I Access NI Volume License Manager from a Different Network or Behind a Firewall?
    http://digital.ni.com/public.nsf/websearch/54E52C3F348B929786256DCD0056B19B?OpenDocument
    Regards,
    WolfgangZ

  • Time sync between server and client

    Hi guys,
    I have written a chess server and client. My next step is to implement a clock which will be used in timed games, however, I am not sure of the best solution. I can't think of a reliable method to keep the client's time in sync with the servers because the event latency varies between individual events and clients.
    My first idea was to send a 'tick' event every second but I dont think this the best solution. I have seen many applet based clients which have timers, such as Yahoo chess.
    I know this question is a little vague, I can give more detail if needed.
    Thanks,
    Alex

    To prevent client-side cheating, the server should keep the
    "official" clock. Every so often (perhaps when a move gets made?),
    notify both clients of the official time. Clients count seconds from
    that official time.
    This is a suboptimal solution because it leaves clients vulnerable
    to network lag. I can't think of any other solution that doesn't give
    clients some responsibility for tracking time, though, and that's a
    big security hole.
    If you're willing to open that hole, have each client report back to
    the server the elapsed local time from when they recieved the
    last move to when they made their move. Then update the other
    client's clock accordingly.

  • Data streaming between server and client does not complete

    Using an ad-hoc app, data streaming between server
    and client does not complete as it supposed to be.
    The process runs well in solaris 5.8, however under 5.9
    we have found the characters stream buffer length limitation
    is around 900 to 950 characters (by default we are using 3072
    characters).
    Example:
    - We are transfering HTML file, which will be displayed
    in the App client, with buffer=3072, the HTML only displayed / transfered
    as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
    in this case, the only problem that we have is the file transfer will
    eventually longer than usual.
    - There is another case, where we have to transfer information (data) as stream
    to the client. A long data stream will not appear at all in the client.
    Any ideas why the change between 5.8 and 5.9 woudl cause problems?
    The current app-driver that we are using is compiled using Solaris 5.6,
    if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
    Thanks
    Paul

    Does this have anything to do with Java RMI? or with Java come to think of it?

  • Redundant folders created in root of C drive of server and Client . I want to stop the same and want to automatically delete them from server and client .

    Redundant folders created in root of C drive of server and Client . I want to stop the same and want to automatically delete them from server and client .
    Please let me know the solution to delete them not manually . It should not create automatically .Is there a way we can change the path of creation.
    Is there a way that once the folfer is create should be automatically deleted once the task is done.
    Redundant folders are created in the root of my C drive all the time,
    folder names look like:
    09b0508d0bd2dbd70523
    56f51b81c1462bb378009ee4d5ed03
    02afe4378371907aca40ab

    This is a duplicate of
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/ae99c2d0-8dea-4c5e-8a79-17e08e9e5de4/sccm-2012-issue-folders-with-long-guid-are-created-in-c-drive?forum=winservergen#ae99c2d0-8dea-4c5e-8a79-17e08e9e5de4
    Jason | http://blog.configmgrftw.com

  • MultiThreaded Server and Client connections query.

    I have written a MultiThreaded Server to accept incoming client requests.
    Multiple clients can connnect to this server and have a conversation.
    I invoke the 'MultiServer' from the command line and then invoke 3 clients
    from the command line.('Client').
    c:> java MultiServer
    c:> java Client
    c:> java Client
    c:> java Client
    All the 3 clients now run in their own thread and send messages
    to the server.
    The problem I am facing is this:
    When client1 connects to the server and sends a message to the server (with the server responding)
    it works fine.Both Server and Client can exchange messages.
    When client2 connects to the server and sends a message and when the server
    responds with a message,the message does NOT go to client2,but goes to Client1
    As Clients have their own thread to run,shouldnt the messages also be delivered to
    individual clients
    Am I missing something?
    My Code
    public class MultiServer {
        public static void main(String[] args) throws IOException {
            ServerSocket serverSocket = null;
            boolean listening = true;
            try {
                serverSocket = new ServerSocket(4444);
                System.out.println("MultiServer listening on Port 4444");
            } catch (IOException e) {
                System.err.println("Could not listen on port: 4444.");
                System.exit(-1);
            // Indefinite Loop.
            while (listening)
             new MultiServerThread(serverSocket.accept()).start();
            serverSocket.close();
    public class MultiServerThread extends Thread {
        private Socket socket = null;
        public MultiServerThread(Socket socket) {
         super("MultiServerThread");
         this.socket = socket;
        public void run() {
         try {
             PrintWriter out = new PrintWriter(socket.getOutputStream(), true);
             BufferedReader in = new BufferedReader(
                            new InputStreamReader(
                            socket.getInputStream()));
               BufferedReader stdInFromServer = new BufferedReader(new InputStreamReader(System.in));
            String fromTheClient,fromServer;
               fromServer = "Hi Client,How u doing? ";
            // Send a message from the Server.
               out.println(fromServer);
                while ((fromTheClient = in.readLine()) != null) {
                 if (fromTheClient.equals("ByeServer"))
                 break;
                 // Display message received from Client.
                 System.out.print("Client Response : ");
              System.out.println(fromTheClient);
                 // Input reply from the Server.
                 fromServer = stdInFromServer.readLine();
                 out.println(fromServer);
                 if (fromServer.equals("Bye."))
                    break;
             out.close();
             in.close();
             socket.close();
         } catch (IOException e) {
             e.printStackTrace();
    Client Code
    ===========
    public class Client {
        public static void main(String[] args) throws IOException {
            Socket kkSocket = null;
            PrintWriter out = null;
            BufferedReader in = null;
            try {
                kkSocket = new Socket("localhost", 4444);
                out = new PrintWriter(kkSocket.getOutputStream(), true);
                in = new BufferedReader(new InputStreamReader(kkSocket.getInputStream()));
            } catch (UnknownHostException e) {
                System.err.println("Don't know about host: localhost.");
                System.exit(1);
            } catch (IOException e) {
                System.err.println("Couldn't get I/O for the connection to: localhost.");
                System.exit(1);
            BufferedReader stdIn = new BufferedReader(new InputStreamReader(System.in));
            String fromServer;
            String fromUser;
            while ((fromServer = in.readLine()) != null) {
                System.out.println("Server: " + fromServer);
                if (fromServer.equals("Bye."))
                    break;
                    fromUser = stdIn.readLine();
             if (fromUser != null) {
                    out.println(fromUser);
            out.close();
            in.close();
            stdIn.close();
            kkSocket.close();
    }

    Taking standard input for multiple threads from one console is quite unpredictable. I think the first client thread is waiting for input when you connect the second. You type something into your server window and since the first thread was waiting for input, it takes the input and sends it to client 1.

  • Dns server and client in java

    Hello!
    Im trying to code a dns server and client in java.
    It`s supposed to be a very simple one. The server should just resolve the query, started from the client.
    Where can I find any code samples? It would really help me to get started.
    Thank you very much!
    Anne

    Do you have some code ?

Maybe you are looking for