ARD 3.1 doesn't show 10.4.10 in list windows

The three trial machines I've installed the 10.4.10 update on have all performed flawlessly.
What's odd is that these three machines, all after restarts, will still show 10.4.9 in ARD Admin's main list windows. Even more strange is that they correctly report 10.4.10 if a report is run. (But then still show 10.4.9 in the list windows!)
Has anyone else run into something like this? Anything obvious that I'm missing?
Power Mac G5 1.8GHz DP, 1.5GB RAM, Mac OS X (10.4.10)

hi brian,
i think that's not the answer, because the current/right OS version should even show, if you simply use the scanner function.
i tried your suggestion - just to be sure - and ARD just updates (as it should) it's report, but fails to update any shown "Mac OS Version" - column. so our problem isn't fixed, at least here.
Various Mac OS X (10.4.10) Mac OS X Server (10.4.9)

Similar Messages

HT5868 I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devi

I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devices.

Hi Dalegu219,
Thanks for visiting Apple Support Communities.
If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
You can use these steps to make sure iTunes is opening the library on your external drive:
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Pick Choose Library and locate the library on your external hard drive.
From:
iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
iTunes: How to re-create your iTunes library and playlists - Apple Support
Best Regards,
Jeremy

ITues 11 picked up on my entire extensive movie, tv show and music collection flawlessly, but importing a movie into iT11, it shows up in the list view, in get info the assigned artwork shows up, but the movie doesn't show up in the non-list (with artwork

iTunes 11 picked up on my entire extensive movie, tv show and music collection flawlessly, but importing a new movie into iTunes 11, it shows up in the list view, in the get info window the assigned artwork shows up, but the movie doesn't show up in the non-list (with artwork) view.
The media collection is on an external drive. And on my older Snow Leopard machine, the newly imported movie also shows up (with artwork) as it should.
Just not in iTunes 11 non-list )main movie) view.
Any ideas on this?
Cheers!

Wait - I meant to say that on the older machine the newly imported move shows up correctly using Front Row, not in iTunes.
Besides, i just noticed that my my hardware profile is not up to date - I am referring to an iMac running MountainLion 10.8.2

My ipad doesn't show on itunes and i have windows 7

so , when i plug my ipad into my computer it doesn't show on iTUNES .. but it charges instead
BTW i have the latest version of itunes .
PLEASE SOMEONE HELP ME :'(

i tryed all the stuff that are listed here http://support.apple.com/kb/TS1538
but i have a problem with this "
5. Verify that the Apple Mobile Device USB Driver is installed
after i opend the Device Manager .. i couldn't do the rest of the steps because i didn't find ( apple mobile device usb driver )
so i went to this step
If the Apple Mobile Device USB Driver is not listed
and i Expand all the sections labeled
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
and i still don't find ( Apple iPhone, Apple iPad, or Apple iPod. )
i hope that u understand me

Sd reader doesn't show up on device manager after windows 7 and river download

I just installed 64 Bit windows 7 and the HP drivers . now the SD reader doesn't work or show up on the device manager

Hi Eddier,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with Web-camera on ThinkPad E535.
Please go to the below link where the same issue was posted in our forum and the issue has been resolve.
The link is for different model but it is with same issue, so I suggest you to perform the troubleshooting steps from the link.
Integrated Camera is not detecting in Device Manager
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1338 i have downloaded a printer driver but it still doesn't show in my add printer list

can anyone help? I am new to mac, so learning my way around

After downloading the new printer driver, go to Applications>System Preferences>Print & Scan>and with the printer connected to your Mac. on the left side of the Print & Scan window Press the "Plus" symbol at the bottom of the left hand column. That should show you the Printer attached to your Mac now.
Hope this helps

IPod doesn't show up after updating to iTunes7 (windows identifies)

Before I updated iTunes everything went well.
Then I did the update and it seemed a success - Ipod showed up and the program-handling was quite similar to the pre-version.
But after restarting my pc, firstly iTunes took along time to open and secondly my iPod was nowhere. I tried all the suggestions form the problem-solving page (nothing helped).
So I came to the point to unistall all the software conjunctioned to my iPod - especially iTunes -and to reinstall iTunes7 only. And again everything went well - iPod showed up. Then I did a restart and again, my dear iPod was nowhere to find
Is anybody out there who's having the same problem and solved it? I would be deeply grateful!
self-construction Windows XP Pro AsusMB-P4-3GHz-730GB

I've solved my problem!
It's because I connect to my pc via FireWire.
If the iPod is connected (via FireWire) to the pc before windows is loaded (before you power up your system), he won't be recognized by iTunes. But if you first switch on your pc and connect after you loged-on to windows, he will be recognized!
USB should not be a problem, it only occurs with FireWire.

Itunes doesn't show Home Share words or list of other authorized computers

I have "turned on" Home Share. I have authorized a second computer. When logged in to the second computer, the Itunes screen does not show the option Home Share, or show the names of the authorized computers. So, no sharing of music is possible. What is the fix for this, please? The Help catalog does not answer the question.

I don't know if you've done this already, but you need to:
Turn on "home sharing" turned on all of the relevant computers;
Make sure the computers have to be on the same network;
You just turned on "Home Sharing", some people report that they had to quit iTunes and restart it before "Home Sharing" worked; and
If those previous steps failed to solve the problem, you might want to check the firewall settings on each of the computers to ensure that UDP Port 5353 (which allows the computers to see each other and appear in iTunes on the other computers) and TCP Port 3689 (which allows the actual "Home Sharing" features to work) are both enabled.
See http://support.apple.com/kb/HT1601 for how to configure the default Windows firewall. If you're running a third party firewall (sometimes part of your antivirus software), the particulars of opening the appropriate ports on the firewall may differ.
If you think the problem may be a firewall issue and you're not 100% comfortable with how to "open ports", a quick test would be to temporarily disable the firewall on both machines, restart iTunes on both machines, and see if it works. This is just a test to see if the firewall is the problem, but you should promptly turn your firewall on again and if "Home Sharing" worked while the firewalls were turned off, you just need to proceed with the particulars of opening these two ports on both machines. I've also seen people open the port in their default Windows firewall, but neglect to realize that they might have two firewalls (e.g., neglect to check their antivirus software's firewall). Unfortunately, the particular instructions on how to open the firewall ports will vary from one firewall software package to another. But if you have problems, let us know what firewall software you're running and someone can probably help. (Or just check with your firewall vendor.)
Hope this helps.

VPN connection doesn't show up on PC settings list after upgraded to Windows 8.1

I can create VPN connection and I can see it in "Change Adaptor Settings". But it is not list on the right-side PC setting menu. When I click on the VPN I created, it turns to the right-side PC setting menu. Usually the VPN was listed there
and click it to connect. But since upgrading to 8.1, the VPN connection is not list on PC settings anymore. Therefore I have no way to connect to VPN.
Can anyone help?????

Hi,
Regarding current information, I suggest you run following commands to scan and repair system:
System file checker:
SFC /SCANNOW
Repair system components:
dism /online /cleanup-image /restorehealth
If these don't work, please help to test this issue under new user account since this issue can be caused by corrupted user profile.
Kate Li
TechNet Community Support

Epson CX5000 driver doesn't show up on Epson model list when I add printer

I am trying to add an Epson CX5000 to my printer list. The printer is connected to a windows PC running XP. While I have no problem finding the printer and making the connection, when I get to the point of picking the model in the drop down printer list in the Print&Fax system utility window, the CX5000 isn't listed even though I just downloaded and installed the driver. I even went through the whole routine of deleting all of the Epson folders in the HD>Library>Printers folder and the Epson Receipt in the Receipts folder, restarting, reinstalling the Epson driver package epson11939cx5k_printer_driver30ba.
I went ahead and just picked another model that appeared close - the CX5100 - but everything prints wrong. (sheet after sheet of blank paper spitting out!) Any ideas?

Hi,
THe CX5000 & CX5100 seem to not be even closely related... go figure.
Have you tried Installing Bonjour for Windoes® on the PC... I think we need to get it seen by the Mac for what it is...
http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html

My Audio waveform doesn´t show up graphically in the arrange window

I´m just starting up new songs with a friend and I can not edit the audio files in the arrange window because the auido file appears like a straight line. The sound is fine, and during recording the audio is shown nicely graphically until I hit the stop button. Then the nicely graphically represented audio turns into a straight line. This phenomenon happened when I run the RME Babyface. Anyone have a suggestion how to solve this?

http://discussions.apple.com/thread.jspa?threadID=2371889&tstart=0

Uninstalling an extension that doesn't show up in the extensions list

I had installed the LastPass extension a few versions of Safari ago. For some reason, it kept crashing the browser when I tried to open it. When I upgraded to Mountain Lion, and a newer version of Safari, I get this message when I start the browser (in its own little window):
"Safari 6.0.3 (v8536.28.10) has not been tested with the plugin LastPass 1.73.0 (v1.73.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information."
I looked for the plug-in in the preference panel (in preferences), and searched the appropriate places in the library folder for the extension, but can't seem to locate it. Is there something I'm missing?

Back up all data.
Triple-click the line below to select it:
~/Library/Safari/Extensions
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder window should open. Delete anything in that folder with the name of the extension. Repeat with this line:
~/Library/Caches/com.apple.Safari/Extensions

After hard drive replacement iPod Touch doesn't show up in Devices menu

I know this is an often-encountered problem, but I am tired of searching... I had to replace the hard drive on my MacBook after 14 months of service (that's another topic of discussion), I want to now sync my info on the iPod Touch with my computer, especially Address Book and iCal, but it doesn't show up in the Devices list. I have tried holding the Shift + Control keys on opening iTunes to no avail. What can I do?

Sorry, this is stupid, but I just reinstalled iTunes and it worked! Don't ask me why. I deleted the iTunes app that the guy at the store had installed, downloaded a new app and reinstalled it and it worked. Even while installing it my iPod Touch beeped and as soon as iTunes was installed it showed up in Devices. I synced the iPod with iTunes, making sure to fusion the data rather than replace the iPod data with the Mac Library. It took awhile because I have almost 3000 entries in my Contacts, but the Address Book was filled up along with iCal, so I am up and running again. Whew! I must add that I had updated the existing iTunes to the latest version, but that had not worked, so you have to completely reinstall. Now, on with the discussion of how a hard drive in a 1 year old MacBook could break and lose all its data...

How can I get rid of Browser Highlighter? It doesn't show up in add-ons (either extensions or plugins), nor is it in Windows Vista program list.

Browser Highlighter updater box pops up every time computer is started & icon shows up in bottom toolbar. It doesn't show up in add-on list, nor windows programs to uninstall. I'm about to switch to another browser.

https://support.mozilla.com/en-US/questions/711023
if this does not work look if you find it in:
C:\Program Files\Mozilla Firefox\extensions '''and delete it'''
or try search the registry(but be careful) for the word "highlighter" '''and delete it'''
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

Hi,
We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
So the questions are these:
1) does anybody know why the added memory doesn't show up in the task manager / rammap?
2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
Thank you,
- Kiril

Thanks for the reply Ravikumar,
Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
Best,
- Kiril
Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
If the above info does not help you, please contact dell as suggested by
Shaon Shan.
Regards, Ravikumar P

ARD 3.1 doesn't show 10.4.10 in list windows

Similar Messages

Maybe you are looking for