ARD 3.2.2 does not warn user on impending shutdowns

Hi, I am using the latest ARD (I think) and even though I have Attempt Restart, Allow Users to Save Work, it won't on updates that require a reboot. The RAWCameraUpdate is a recent example. Any ideas? thx!!!

forget about it I guess, it's just broke. i have started sending users warnings of impending shutdowns via ARD message facility, at least they are being warned that way...

Similar Messages

Adobe form created in LiveCycle does not remember user input

Adobe form created in LiveCycle does not remember user input when the file has been re-opened after it has been saved.
Example:
"Check box" that has been selected and who have registered Action script (may be that it should be disabled), seems to be reset when the file is re-opened, although it apparently is checked.
Are there settings or script that can prevent this?

Hi there,
usually if the values are not kept in form after saving and re-opening the form, it would be because of your code... or because it is not Reader Extended PDF...
If your code has a function which is to return a value to your field without it to be working based on your Design, it will reset any data..(variables)
Which means...
e.g.: You have an array/var/JSONobject which you populate varying on the data entered in the design, as long as you are in the actual form, without closing and re-opening the form, it will keep all values inside that array / variables / JSONobject. But, once the form closed and re-opened, if you have a function that returns a value to your field, whatever the field, from any variable in the script it will return nothing because every variables are reset. To avoid such a thing, you must repopulate all variables that were assigned previously before closing the PDF Form. To do so, I recommend to have a page(hidden) which contains every important values according to that function and you must repopulate those variables according to the values in the keepVar page...
If you do not have any function that returns a value to a field based on your variables, this is not the solution you are looking for and I am not aware of the reason why it behaves like this... Maybe more information on the behaviour of your form would help locate the issue...
Hope this help

Server does not recognise user and password

unable to email photos. server does not recognise user and password

This is a quite interesting issue. Perhaps it may help if we start by trying to understand what caused the issue and then we will consider how you might recover from it.
One of the things that Cisco wanted to do as they released version 15.0 was to improve the security of passwords in IOS. So they designed and implemented a new "type 4" password which they intended to replace the previous "type 5" password used for enable secret or for username secret passwords. So in those versions of 15.0 if you configure enable secret or username secret for passwords the IOS would create the new type 4 password.
Then you reacted to some problem and loaded an older version of IOS. 12.2(55) does not understand the type 4 passwords. So as your switch booted on this version of code and it read lines in the startup config that had type 4 passwords it did not understand them and marked them as invalid input. So the result is that your switch does not have an enable secret and perhaps usernames do not have passwords.
I do not know if you will be able to recover without doing password recovery but I have a suggestion which you can try. See if you can login on the console. It may depend on how your switch was configured whether it will let you do that and whether it will let you get to enable mode on the console. The default behavior was to allow the console to get to enable mode without a password. If your configuration includes aaa authentication enable default enable then the console may not work and in that case I believe that your only alternative will be password recovery.
HTH
Rick

Why OID Connector User Search Reconciliation Sch. Job Does Not Link Users?

Hi,
I provisioned a user to the resource successfully; then I ran OID Connector User Search Reconciliation Sch. Job sucessfully. When i check the Reconcillation Event results, i can see the event related with my Sch. Job but in the details of the event Linked To part is empty. I am expecting to see linking result but unfortunately no linking result represented. It says Not linked to any user as result of Linked User field.
Do u have any idea?

In Form, i have the following Additional Column with the following Field Label --> KK
In the ReconAttrMap, i have the following mapping --> Code: KK Decode: uid
In the Reconcillation Rule, i have the following Rule --> User Profile Data: User Login
Operator: Equals
                                             Attribute: Kullanici Kodu
                                                  Transform: None
                                                  Case-Sensitive: Unchecked
                                                  Properties Set: Checked
Rule is Valid and Active and Using AND Operator
In the Resource Object, i have the following Reconcillation Field --> *KK [String], Required*
In the Resource Object, i have the following Reconcillation Action Rules --> Rule Condition: One Entity Match Found Action: Establish Link
                                                                      Rule Condition: One Process Match Found Action: Establish Link
Then i click to the Create Reconcillation Profile.
Job still does not link Users. Any missing settings?

I have checked the warn me when closing firefox with multiple tabs open but the system does not warn me and closes all of the tabs?

i have checked the box that says to warn me if i am closing firefox with more than one tab open but if i do close with more than one tab open it does not warn me?

For a summary of what to do to get the old behaviour back see this post from [https://support.mozilla.com/en-US/questions/804339#answer-158823 Helper 7677]

Does not warn before closing multiple tabs

On version 12 and even now 13, even with "warn me before closing multiple tabs" checked, it does not warn me. I have read about issues with saving data to disk and private browsing. All I want is to be warned before X-ing out of a window with multiple tabs open

Hi, my issue has nothing to do with saving tabs for the next time. If I have at least two tabs open, then click on the X to close the window, I do not want the window and tabs to close. I want a warning asking me, "do you want to close this window?"
That feature is not working anymore. It just closes the window without prompting a warning, asking if that is what I really want to do.

Sharepoint does not resolve users from federated AD directory

Our sharepoint farm resides in a domain called abc.com and we just federated with another domain def.com.
The issue is that 9 out of 10 times sharepoint does not resolve users from def.com when adding them using the normal GUI and people picker. Users from def.com domain will have to click on the url and request access before they can be added to the sharepoint.
Please can someone let me know what needs to be done so that sharepoint can resolve users from def.com domain using the people picker.
Kind Regards
Louis
thanks

Here is the way to do this via PowerShell:
http://thesharepointfarm.com/2014/01/powershell-for-people-picker-properties/
Do you have a two-way trust enabled? In that, case, it isn't required to use peoplepicker-searchadforests. If you do have a two way trust in place and SharePoint has port access to the remote domain controllers, does the remote domain NetBIOS and FQDN match
(e.g. EXAMPLE and EXAMPLE.com)?
As far as the credentials, you put in the remote domain's credentials, e.g. "forest:abc.com;forest:def.com,username,password" where the username is the sAMAccountName of a user in the remote domain.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What do I do when IPhoto says "mail server does not recognize user name/password?

What do I do when IPhoto says "mail server does not recognize user name/password?

Fixed by resetting my password to Apple's new protocol! In my case, I had to add a capitol letter.
Reset here:
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot

Facebook login does not add user and password to the account

Hi
PROBLEM
Facebook login button does not create user and password for login.
We wish we could ONLY use facebook login button to allow users the account creation on our campus.
So we disabled the user creation webform.
And only out facebook login buttons that students can only login to our campus using their fb account in the hope that they dont share it (hopefuly)
AND
This is a problem BECAUSE if I publish events and capture leads ALL those users have problems creating their user account latter.
CASE IS
1.- A person comes to my website and leaves a comment. This creates a register with their email and name.
2.- Days later this same user comes back and clicks a facebook user login/ account creatio.
2.1 The page now shows that user name as it comes from Facebook. BUT NO USER AND PASSWORD information added to that person's register in the CRM.
So
If some one leaves a comment, register to our mailing list FIRST
and SECOND tries to create his account afterward. IT DOESNT WORK
Any ideas?
Thank you so much in advance.
P.S.
This is the web page. If you 1) Leave first a comment and 2) click on fb login/create account button the profile renders unusable. I have to delete it so you can create your user
http://www.zuiliuniversity.com/nivel-2-curso-especializado-proyecto-de-marketing-digital

if you are only using 2 snmp commands to let the switch pull the config from your tftp server, than there are some commands missing ...
have a look here to get a documentation about this process:
https://supportforums.cisco.com/docs/DOC-1860
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml

ARD 3.3.2 does not create new reports

Hi all!
I am running ARD 3.3.2 on my MacBook Pro with Mac OS X 10.6.2
All my clients are on ARD client 3.3.2 as well but run Mac OS X 10.4.11 or 10.5.8.
Since I've updated to 10.6 and ARD 3.3.2 i am not able to create new reports (with rebuild with new data check box activated) on any client system. ARD starts the task and stays in the status "waiting for report data" (which is translated from its German version and might be called a little different in English).
And there it stays--- for a very long time until I get an task failed message.
All clients are in the same network segment as I am. I am able to observe and control all machines as well as copy and install software onto them. Clients have no firewall activated.
All clients have one Admin User installed , which is allowed to make full use of ARD functions. When adding the clients to my ARD Computer list I used this Admin User credentials.
Does the new ARD doesn't support older OSses any more??
Any ideas , how am I able to solve this and get reports going again???
Thanx
Holger
Message was edited by: Holger Bartsch (added some more detail to client setup)

I manage 400+ computers at a University using ARD 3.3.2 with Client 3.3.2. I can not generate reports and haven't been able ever since Snow Leopard came out. We also have a developer account and there is no upgrade or version 4 in the works. Perhaps Apple's focus on giving iChat remote access has made them forget about Apple Remote Desktop, which is a shame because it's such a wonderful product.
We've been looking at Net School Support [http://www.netsupportschool.com/audio.asp] It's not as robust, but I can't continue spending money on a product/company that doesn't care about it's customer's problems. In general Apple's enterprise software efforts seem to be losing functionality instead of improving. OS 9 ARD had audio chat features, non-freezing screen lock and of course, working report generation.

Yosemite - Safari still does not warn when closing multiple tabs, what will it take to get Apple to add this simple option?

I cannot understand why Apple does not add the option to warn you when closing multiple tabs. There are posts all over the Internet requesting the feature or looking for a way to do it. Why do they totally ignore this valuable, simple feature?

Thanks for the support. I guess you take one battle at at time because you hate to lose multiple battles and I picked this one. However, and this could go on quite a while, why do I have to buy another application to sort my bookmarks and have the sort sync the Cloud?. Bookmark sort - that is a programming 101 feature. Now I found that iPhoto can read AVCHD video files and Quicktime cannot. Oh my. I wish Apple would read the posts and actually take them into consideration. It would make their users feel more included. I do like Yosemite and love email markup. Good job but the customers have a few good ideas too.
At least you can Air Drop to Mac now!

[SOLVED] Sudo does not accept user password

Hello , again !
usually i run root commands with sudo , and i enter my current user password and everything works !
Today , i updated my Arch linux with :
pacman -Syu
and my arch upgraded to 3.4.2-2.
but when i want to run a command with sudo , i cannot use my current user password ?
thankyou
Last edited by arashroshan (2012-06-19 11:10:52)

thank you for reply but i have read sudo wiki and also sudo was working before updating .
by the way su is still working .
here is my sudoer file :
## sudoers file.
## This file MUST be edited with the 'visudo' command as root.
## Failure to use 'visudo' may result in syntax or file permission errors
## that prevent sudo from running.
## See the sudoers man page for the details on how to write a sudoers file.
## Host alias specification
## Groups of machines. These may include host names (optionally with wildcards),
## IP addresses, network numbers or netgroups.
# Host_Alias WEBSERVERS = www1, www2, www3
## User alias specification
## Groups of users. These may consist of user names, uids, Unix groups,
## or netgroups.
# User_Alias ADMINS = millert, dowdy, mikef
## Cmnd alias specification
## Groups of commands. Often used to group related commands together.
# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
# /usr/bin/pkill, /usr/bin/top
## Defaults specification
## You may wish to keep some of the following environment variables
## when running commands via sudo.
## Locale settings
# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
## Run X applications through sudo; HOME is used to find the
## .Xauthority file. Note that other programs use HOME to find
## configuration files and this may lead to privilege escalation!
# Defaults env_keep += "HOME"
## X11 resource path settings
# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
## Desktop path settings
# Defaults env_keep += "QTDIR KDEDIR"
## Allow sudo-run commands to inherit the callers' ConsoleKit session
# Defaults env_keep += "XDG_SESSION_COOKIE"
## Uncomment to enable special input methods. Care should be taken as
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
# Defaults log_output
# Defaults!/usr/bin/sudoreplay !log_output
# Defaults!/usr/local/bin/sudoreplay !log_output
# Defaults!/sbin/reboot !log_output
## Runas alias specification
## User privilege specification
root ALL=(ALL) ALL
## Uncomment to allow members of group wheel to execute any command
%wheel ALL=(ALL) ALL
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
#arashr ALL=(ALL) All
## Uncomment to allow members of group sudo to execute any command
# %sudo ALL=(ALL) ALL
## Uncomment to allow any user to run sudo if they know the password
## of the user they are running the command as (root by default).
# Defaults targetpw # Ask for the password of the target user
# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
## Read drop-in files from /etc/sudoers.d
## (the '#' here does not indicate a comment)
#includedir /etc/sudoers.d
Last edited by arashroshan (2012-06-17 10:02:55)

ARD 3.5.1 Client not creating users

Hi,
We have recently purchased ARD 3.5.1 but the client installer is not creating the User we have specified in the create client installer wizard. After some research, there was a post saying that we should add a case for 10.7 in the makeuser file inside the client installer package. I have done that, and it created the user. That seemed to have solved that problem. But, another problem is that ARD will not connect to that client unless remote managment is unchecked and then checked again.
That all seemed to have made everything work fine. The problem is, this is not a fix. I have to do this on alot of systems and I do not want to have to uncheck and recheck remote management throughout the company.
Is this something that any of you are dealing with?
Why would we even have to edit the makeuser file. The case should have already been set on apples end. I also should not have to uncheck and recheck remote management in order to kickstart the service. This should all be already configured properly during the Create Client Installer wizard.
Any help or feedback would greatly be appreciated!
Thanks!
(Using ARD 3.5.1 & 10.7.2 machines)

Lion/ARD users,
I am also having issues with ARD and Lion.
I have done my Lion upgrades remotely via ARD. The Lion upgrades do ok and after install reboot I get remote connection back up again. However after running software update, which downloads ARD Client 3.5.1 my Apple Remove Desktop is no longer able to connect to the machine.
I also cannot access machine via VNC but can access it via SSH.
So it appears to be a problem with VNC ...
Here is the error:
So while ARD see the "fritz" client ok it cannot connect to it.
I have looked in Console log and there are no clues there about what is causing the problem.
I have install the ARD Admin 3.5 Update, so that does not help fix the problem.
I have 7 remote Mac I need to access to this is a signficant problem...
Cheers,
Zebity.

Content repository FD does not exist :user agent sap web application server

Hi All
i am using 3rd party software(dms SERVER) and connecting it using archive link interface SAP HTTP 4.5 AL
i have created a new repository with name FD using tcode OAC0.when i give inputs in OACO and click on test connection it gives me information Content repository FD does not exist
here is my HTTP trace at receiver content server side
TRACE:(5) - GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
TRACE:(5) - user-agent: SAP Web Application Server (1.0;700)
TRACE:(5) - host: SERVERIP:PORT
TRACE:(5) - accept-encoding: gzip
TRACE:(5) -
--> C05 --> S06 ==== (15.583) Request <GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0>
--> C05 --> S06 GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
--> C05 --> S06 user-agent: SAP Web Application Server (1.0;700)
--> C05 --> S06 host: SERVERIP:PORT
--> C05 --> S06 accept-encoding: gzip
--> C05 --> S06 ==== Body 0 bytes
--> C05 --> S06 Body =>
Sockets 6 of 4,5,6 need checking ####
TRACE:(6) - HTTP/1.1 200 OK
TRACE:(6) - Cache-Control: private
TRACE:(6) - Content-Length: 189
TRACE:(6) - Content-Type: text/plain; charset=utf-8
TRACE:(6) - Server: Microsoft-IIS/7.5
TRACE:(6) - X-AspNet-Version: 2.0.50727
TRACE:(6) - boundary:
TRACE:(6) - X-dateC: 2010-10-22
TRACE:(6) - X-timeC: 07:07:23
TRACE:(6) - X-dateM: 2010-10-22
TRACE:(6) - X-timeM: 07:07:23
TRACE:(6) - X-contentRep: FD
TRACE:(6) - X-numberComps: 1
TRACE:(6) - X-docId: 0
TRACE:(6) - X-docStatus: online
TRACE:(6) - X-pVersion: 0045
TRACE:(6) - X-ContentServer: contentServer=Server ip;contentServerPort='9025;pVersion='0045';id='DMSSRV1'
TRACE:(6) - X-Powered-By: ASP.NET
TRACE:(6) - Date: Fri, 22 Oct 2010 13:37:23 GMT
TRACE:(6) - Connection: close
TRACE:(6) -
TRACE:(6) - serverType='DMSSRV1';1;serverVersion=12;serverPatch=0;serverBuild=180;pVersion='0045';serverStatus=running;serverStatusDescription=;serverDate='2010-10-22';serverTime='07:07:23';startUpDate='2010-10-22';startUpTime='07:07:23';lastAccessDate='2010-10-22';lastAccessTime='07:07:23';contRep='FD';contRepStatus=defined;contRepStatusDescription=;contRepDescription=Content-Repository Test;contentStorageHost=localhost;contentStorageName=FD;secKeyVerification=y;defaultDocProt=rucd;
one change which i have observed in this trace is .. this trace is showing trace agent as SAP Web application server ... ideally it should show user agent :SAP HTTP
Please suggest me some solution.
Thanks
sandeep

Dear all,
my issue is resolved.I solved my issue myself
solution: SAP sends HTTP request in the form of URL like
http://serverip:port/GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
Now your response should contain string contRep="FD"
dont forget double quotes on repository name coz SAP program matches string with double quotes. if you will return value like this contRep=FD
this will through error.
Thanks
sandeep sharma

Impdp does not create user/schema

I'm an Oracle noob. I'm trying to copy (expdp/impdp) schema (no data) from one machine to another. I do not want any remapping. I just want empty table structure created on targetHOST.
Error I get is:
    ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
    ORA-31625: Schema ZABBIX is needed to import this object, but is unaccessible
    ORA-01435: user does not exist
My understanding is that if the user performing import has 'IMPORT FULL DATABASE' privilege, it'll create the users/schemas in the targetHOST. I granted it to 'scott' and tried with that too, same error.
- DB version: SQL*Plus: Release 11.2.0.1.0 Production on Thu Oct 24 14:27:41 2013
- If it matters the DB version on sourceHOST is 11.2.0.***3***
- OS: Linux targetHOST 2.6.18-308.el5 #1 SMP Fri Jan 27 17:17:51 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
Import errors:
    (0)oracle@targetHOST$ sqlplus system/manager
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Oct 24 14:27:41 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    SQL> select * from session_privs;
    PRIVILEGE
    IMPORT FULL DATABASE
    CREATE SESSION
    .......200 other privileges.......
    202 rows selected.
    SQL> ^D
    (0)oracle@targetHOST$
    (0)oracle@targetHOST$ impdp system/oracle123 directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=impdpZabbix.log
    Import: Release 11.2.0.1.0 - Production on Thu Oct 24 14:14:51 2013
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=impdpZabbix.log
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
    ORA-31625: Schema ZABBIX is needed to import this object, but is unaccessible
    ORA-01435: user does not exist
    Failing sql is:
    BEGIN
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'XXX.YYY.COM', inst_scn=>'7788478540892');COMMIT; END;
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39083: Object type TABLE:"ZABBIX"."TABLE1" failed to create with error:
    ORA-01918: user 'ZABBIX' does not exist
    Failing sql is:
    CREATE TABLE "ZABBIX"."TABLE1" ("COLUMN1" VARCHAR2(20 BYTE) NOT NULL ENABLE, "COLUMN2" VARCHAR2(20 BYTE), "COLUMN3" VARCHAR2(20 BYTE)) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAU
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
    Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 2 error(s) at 14:14:53
    (5)oracle@targetHOST$
Export was done using following command (on a different machine)
(0)oracle@sourceHOST$ expdp zabbix/zabbix schemas=ZABBIX content=METADATA_ONLY directory=TEST_DIR dumpfile=ZABBIX.dmp logfile=expdpZABBIX.log
Complete export log available here.:

I figured it out on my own. Required privilege is 'CREATE USER'. I don't have system's password so I granted CREATE USER to zabbix, made it DBA and it seems to be exporting more than it did last time:
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Yet to import but looks good so far..
Appreciate you taking the time..
Thanks...

ARD 3.2.2 does not warn user on impending shutdowns

Similar Messages

Maybe you are looking for