ARD 3.5.1 server to ARD 3.5.1 server times out after inactivity?
So I am just like most in here that are having issues with 3.5.1, but so far I cant see no one has reported the server to server issues.
I have a work machine that I have ARD 3.5.1 on, on a new lion install. Works great for everything around my office.
I also have a machine at home that I have ARD 3.5.1 for some server stuff. I upgraded that machine to lion last night as well. Now, I cant connect home from my work machine. So thats ARD server 3.5.1 to ARD 3.5.1 server. If I issue the command on the home machine im trying to take control of:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all
It will work, but it obviously is timing out or something. 10 minutes later, I cant connect again saying the connection failed, meanwhile the main screen shows whats idle, what program is in use, all updating correctly.
Any ideas? Love the product, just want to get it working again
I had a similar problem where it worked at first then just started to fail.
I found the answers here:
https://discussions.apple.com/thread/3193742?start=0&tstart=0
and
http://support.apple.com/kb/HT2370
I simply issued the two commands he suggested and everything seems ok again. (copying and pasting his didn't work at first cause of an erroneous space between the k and i in the word kickstart in the path. I fixed it here)
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -deactivate -configure -access -off
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all
Good Luck!
Similar Messages
-
Thanks
It looks like you have many data in JOB VIEW history. You may PURGE the jobhistory.
You can keep the history info for last few months and purge the old data using
sp_purge_jobhistory Ref: http://technet.microsoft.com/en-us/library/ms175044.aspx -
I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?
ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?
-
Cannot connect to OS X Server via ARD after 10.6.4 Update
Hi there
Just updated my server from 10.6.3 to 10.6.4. Everything is still fine - except the fact that my Remote Management seems to be dead now...
"Remote Management" is definitely on. But on my Client(s), the server is not recognized and its status is either "ARD not activated" or not even visible (just the black icon with the server's IP; but without its hostname). But DNS is fine...
I can use Server Admin and SSH as usual. Even restarted the agent with "sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent" which reported back that it has restarted.
But still no signs of my server in ARD. So it seems that VNC crashed on the server?!
Did not find any hints in the log files. Firewall is off by the way.
All the best and thanks
GoofyI started having this exact same problem on my sever with the update to 10.6.4 Server, in that ARD access did not work at all. I'd get a "connection failed" message every time I tried to connect.
Kickstart did not solve the problem.
Finally, I gave up and decided to wait for 10.6.5 Server in hopes that the problem would go away after THAT update.
I have now updated to 10.6.5 Server, and no dice.
ARD still doesn't work.
Kickstart still doesn't help.
Any advice?
Thanks,
Rusty -
Want to connect to client's server with ARD, and run ARD on the server.
Hi, I have Apple Remote Desktop and use it to monitor, update and service clients servers. I also have client's buy ARD to use internally to access, update and maintain computers on the network.
When I try to access/sign-in to a server with ARD, when it's running ARD, it will not connect.
What is the proper way to ARD into a server and still be able to run ARD on the server to connect with and work on other computers on the local network?
Thanks in advance.On the client server install of ARD, open ARD, select preferences, select security tab, and make sure "allow control of this computer when ARD is running" is selected.
-
Error in accessing ARD client 2.2.1 from ARD admin 3.2 via Airport
Hi all,
I was successfullly accessing mac-mini machine having ARD client 2.2.1 which was connected to ethernet cable from ARD admin 3.2. But now when I am trying to access same mac-mini machine which is now connected to airport, I am getting following error:
Machine is having old ARD client/agent.
Even though, ARD 3.2 supports ARD 2.2.1, why am I getting this error? How to resolve this error?
Thanks,
PalavBecause Chicken of the VNC doesn't use the full ARD client, only the VNC portion. The error you reported:
Machine is having old ARD client/agent.
is exactly what I'd expect when accessing a 2.2 client from ARD 3.2. You will need to update the client version to 3.2, and that will require that the ports in the Airport base station be open and forwarded so that the ARD administration application can get full access to perform the client upgrade. -
When i am installing Ard on sap ->Add-on Manager Screen Msg appears *add-on connection time-out.The gets installed.
At the time of making ard i given time 2000While creating final ard file dont use any connetion string .
1) REmove connection string.
2) Rebuild application.
3) Create ARD file.
Use below code for any ref.
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// Statment should be suficient for either development or run mode
'sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
sConnectionString = Environment.GetCommandLineArgs.GetValue(1) '
'sConnectionString = "5645523035496D706C656D656E746174696F6E3A59313931303035313531383699469FA92C3C9A964A219C5862952A90D911E9" 'Environment.GetCommandLineArgs.GetValue(1)'
Try
SboGuiApi.Connect(sConnectionString)
'// connect to a running SBO Application
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
Catch ex As Exception
MsgBox("Make Sure That SAP Business One Application is running!!! ", MsgBoxStyle.Information)
End
End Try
SBO_Application.StatusBar.SetText("DI is Connecting now", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
End Sub -
Moving from Exchange 2007 to 2013 (leaving the DNS Server for it's own dedicated server)
Hello! I am quite new to Exchange and Server management in general. I will do my best to explain my situation.
I am looking to move my Exchange server off of our DNS server. When we installed them on the same server, we did not have the funds to buy 2 separate servers. I am told that it is best to separate the two. I have followed the Microsoft instructions for installing
the prerequisites for Exchange 2013 on a 2012 R2 server, and i am at the point where it wants me to configure AD LDS. As I have active directory running on the current server, I was a little hesitant to just install it without understanding what i am doing.
After the AD LDS is configured, I believe i can move forward with installing Exchange 2013 (all 3 roles will be hosted on the new server), export the mailboxes from 2007 server and import them into the new Exchange 2013 server. After 2013 is up and stable,
I plan on removing 2007 from the old server (DNS server).
What are my next steps after importing the mailboxes? Am i missing important details that I need to change or migrate?
My biggest fear is that nothing works after the installation and moving the mailboxes over. For that case, it makes sense to keep 2007 installed as a fallback for when my installation fails and all i have lost is just my time :)
Current Server:
Windows Server 2008 Standard (64 bit)
1. Roles: Active Directory, DNS, IIS
2. Software: Exchange 2007
New Server:
Windows 2012 R2 Server
1. Roles: ???
1. Software to install: Exchange 2013
Thank you for any help you can provide!These are good resources, but i am still caught up with the active directory issue. Am I able to keep the old Domain/DNS/Active directory on it's current server and move Exchange 2007 off onto a new server (with Exchange 2013)?
In the first example, he is moving everything (domain controller, exchange, users, etc) onto a different server and decommissioning it.I've been told that it would be better practice to keep the domain and exchange on 2 different servers. Is this true?
I go to run commands like:
.\setup /PrepareAD /OrganizationName: orgname /IAcceptExchangeServerLicenseTerms
on the new exchange server, as a prerequisite and it doesnt recognize the command - even after following the steps before. Is this because the new server is not a domain controller? does it have to be? What are the best practices for setting up a server(s)
with exchange + domain controller?
Thanks for responding. -
Session time out in Websphere Application Server
Hi ,
I am using Websphere Application server 5.1 . I need to set the session time out for my web application. Actually, i edited the web.xml and set the value
<session-config>
<session-timeout>10</session-timeout>
</session-config>But when I am refreshing my jsp page, after 10-15 mts, i am able to get a valid page without any problem. Actually since the session time out is 10 mts , I should not get a valid page after 10 mts . I tried one more option for setting the session time out . I opened the admin console of my App server and set the session time out there too. But session not seems to be timing out after 10-15 mts. I am still able to get a valid jsp page. I have many session attributes in that page. So after 10 mts, i should not get a valid page.. I dont know, what's wrong in my configuration. If some body knows the answer please help me.
thanks in advance.
Aneesh KSo what you're trying to achieve is that the ui closes or becomes invalid if no action has been performed for a certain time? That should be easy enough, install a javax.swing.Timer somewhere in your application and set it to the time you desire. Whenever the user performs an action, invoke reset() on the timer (it's a fairly cheap operation). If the timer fires, you know the timeout occured.
You have to decide for yourself what you consider a 'user action' in this context. If you want the session to stay alive as long as the user is still doing something, just install an AWTEventListener, which can react to pretty much anything, mouse movement, keyboard input etc. -
Session time out in Application server -reg
hi friends
We have Oracle Application server 10g in cluster mode in our organization. We are using Oracle Forms and Reports . But there is one issue. If the user keeps the screen idle for more than 20 min the system gets timed out and requires sdba authentication . We actually increased the time out value. But we could not able to remove sdba authentication. Our aim is to remove authentication after session time out. It is ok even if the application completely closes and comes out of the screen. But the user must not be asked to enter sdba credentials after system is idle for the time out period.
M.C.JayanarayanHi,
you posted this question to the JDeveloper forum, where it may be better posted to the application server forum or the Forms forum
Frank -
Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.SDear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath -
I have been unable to access my twitter account for two days, when I log in it will not connect, it tells me the server is not responding and it times out, all other pages I use are fine, I can't even get to the page by searching and going into page that way.
This is from article on device with multiple computers:
iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
http://support.apple.com/kb/HT1202 -
How to deal with deadlock on wwv_flow_data table when http server times out
There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu MeeuwissenHello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David -
Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?
I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!. -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]
Maybe you are looking for
-
Dynamic layout formatting in Oracle BI Publisher reports
We are creating a planning report in BI Publisher, where in we have a requirement of dynamic formatting based on the month we are running the report. In the report we have different months as columns which displays the values for different KPIs (disp
-
Hello to all. I have just implemented a simple client/server application which enables file transfers. I would like to know if there is a way of implementing a remote file viewer in which i will be able to send requests and download files. My primary
-
Basically we need to know if we offer our services in designing the ibook are we considered as distributing it to our client or is our client is the distributor as they are giving it to their employees.
-
Hi Gugu(s), We are using JBuilder 5.0 to develop our J2EE applications. My current project involves WLPS 3.5 over weblogic 6.0. And I am having tough time setting up JBuilder to start WLCS/PS. So currently i am building my jars/wars on JBuilder on We
-
ESSO and Oracle Discoverer Plus
Hi, I'm configuring eSSO-LM (ver. 10.1.4.0.3, comes with eSSO 10.1.405) to work with Oracle Discoverer Plus, but haven't got too far. ODP is a Web application that raises a new browser window, which in turn raises another window for login. The window