ARD Access with enabled Firewall not possible
I got a network and my clients are running mostly Mac OS X 10.5.8 Leopard. When the Firewall is on i am not able to connect with Apple Remote Desktop even though the Firewall automatically enables the ARD service. Does anyone know what to do? My 10.4.11 Tiger clients do not have the same issue.
Try the ARD forum under Server Products.
Similar Messages
-
ARD Access with enabled Firewall not possible under Leopard
I got a network and my clients are running mostly Mac OS X 10.5.8 Leopard. When the Firewall is on i am not able to connect with Apple Remote Desktop even though the Firewall automatically enables the ARD service. Does anyone know what to do? My 10.4.11 Tiger clients do not have the same issue.
Try the ARD forum under Server Products.
-
HT201272 connection with itunes is not possible
hello,
because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
how to solve this problem?Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368 -
I cannot access a website from ipad, which I am able to access from my laptop(not apple)?
This site works fine with Puffin Web Browser on the iPad; http://itunes.apple.com/app/puffin-web-browser/id406239138?alreadyRedirected=1&m t=8
-
Charts with Makit, scrolling not possible
Hello Forum,
I'm experiencing an issue regarding Makit Charts on Mobile.
The problem is that is not possible to scroll down the page on mobile if the charts is 100% (width and height) and in both directions landscape and portrait.
The chart's container is sap.m.Page and as explained in the official documentation the scrolling is provided automatically.
I attach my code and both images (desktop and mobile).
Hoping your answers could help me.
Thanks.
jQuery.sap.require("sap.m.MessageBox");
sap.ui.jsview("demo.charts.views.Multichart", {
getControllerName : function() {
return "demo.charts.views.Multichart";
createContent : function(oController) {
var page = new sap.m.Page();
var value = new sap.makit.Value();
// var category = new sap.makit.Category();
var category_axis = new sap.makit.CategoryAxis;
var series = new sap.makit.Series();
var bubble = new sap.makit.ValueBubble();
category_axis.setDisplayLastLabel(true);
page.setTitle("Multi Chart");
value.setExpression("Netwr");
value.setFormat("currency");
value.setDisplayName("Revenue");
// category.setColumn("Gjahr");
// category.setDisplayName("Year");
series.setColumn("Bukrs");
series.setDisplayName("Company");
bubble.setStyle(sap.makit.ValueBubbleStyle.FloatTop),
bubble.setShowCategoryText(true);
var chart = new sap.makit.Chart({
// category : category,
categoryAxis : category_axis,
valueAxis : new sap.makit.ValueAxis({}),
series : series,
values : value,
valueBubble : bubble,
categoryRegions : [
new sap.makit.Category({ column : "Gjahr", displayName : "Year" })],
chart.setType(sap.makit.ChartType.Column);
chart.setShowTableView(false);
chart.setShowRangeSelector(true);
chart.setShowTableValue(false);
chart.addColumn(new sap.makit.Column({
name : "Gjahr",
value : "{Gjahr}"
chart.addColumn(new sap.makit.Column({
name : "Netwr",
value : "{Netwr}",
type : "number"
chart.addColumn(new sap.makit.Column({
name : "Waerk",
value : "{Waerk}"
chart.addColumn(new sap.makit.Column({
name : "Bukrs",
value : "{Bukrs}"
chart.setModel(this.oModel);
chart.bindRows("/Chart_DataSet");
chart.attachEvent("tap",function(oEvent){
var isRightMB;
var e = oEvent.getParameter("eventObject");
if ("which" in e) // Gecko (Firefox), WebKit (Safari/Chrome) &
// Opera
isRightMB = e.which == 3;
else if ("button" in e) // IE, Opera
isRightMB = e.button == 2;
if(isRightMB){
var srcObj = oEvent.getSource();
// var srcElem = srcObj.getDomRef();
var temp = document.oncontextmenu;
document.oncontextmenu = function (e){
document.oncontextmenu = temp; // reset back to its
// original state, so that
// other elements still have
// context menu
return false;
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Right Click - Selected Category", [sap.m.MessageBox.Action.OK] );
chart.attachEvent("doubletap",function(oEvent){
var chartObj = oEvent.getSource();
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Double Tap - Selected Category", [sap.m.MessageBox.Action.OK] );
var oButton = oController.generateConfigPopover(chart);
var oBar = new sap.m.Bar({
contentLeft : [ new sap.m.Button({
text : "Back",
type : sap.m.ButtonType.Back,
press : [oController.handleNavButtonPress, oController]
contentMiddle : [ new sap.m.Label({
text : "Multi Chart"
contentRight : [ oButton ]
page.setCustomHeader(oBar);
page.addContent(chart);
return page;Hi,
I don't have "Advanced" tab in Mouse settings in control panel. Is there something i need to install in adition to Toshiba Synaptics drivers?
I also tried changing every available setting in Synaptics drivers settings, but no change :(
About Synaptics generic driver: Yes, I chose that one, but as I said, it's really buggy with two finger scroll, so I reverted back to Toshiba ones. -
Playlist ordering with 4G shuffle NOT possible
It's not possible to sync the order of songs with the 4. Generation of the iPod shuffle. THe shuffle is playing always ordered by Artist.
Changing the order in iTunes and re-sync the iPod doesn't affect the order on the iPod shuffle.
Is this a bug in the firmware of the 4G shuffle or a problem with iTunes?You can sort all the music that is not in a playlist on your shuffle. It inherits whatever sort you have selected for your entire music library in itunes. To see what I am talking about, do this:
1. Under Library (on the left side of iTunes) click "Music"
2. You now see on the right your entire music library. At the top, click the top of the column you want to sort by. You can right click to add more columns
3. Sort by something different than what you are currently sorting by.
4. Connect your shuffle and wait for it to come up
5. When your shuffle appears on the left, open it and click "Music" and note how it is sorted. The column it is currently sorted by will be darker in its heading and their will be a triangle in that columns heading
6. Now click on the name of your shuffle and click sync.
7. Go back to your "Music" entry on your shuffle and you will see it is now sorted by the column you changed your iTunes music library too.
So, your music on your shuffle will inherit the sort order you have set for your entire library on itunes, when you sync it.
Does that make sense?
i -
Recording at 96k with Line6 Toneport not possible with Audition??
Is anyone else out there using a Line 6 Toneport device to record in Audition? This is a 96k recording device but choosing "96k" is not possible in Audition. I just spoke to Line 6 support and they say it's the fault of Audition. They say I have to choose 96k within Audition but I don't have to do that with my other devices. I'm able to record at 96 using other devices no problem by choosing in in the device control panel. The Line6 Toneport control panel doesn't give 96k as an option.
So Line 6 tells me that it's impossible to record at 96k in Audition. Please tell me it isn't so???
Anyone got any help here?
thanks!A slight departure from previous behavior is that Audition no longer automatically changes the sample rate of your device. There were too many problems when switching between different applications (e.g. between Premiere Pro and Audition, or Audition and Windows Media Player, etc) and the clock setting changing on the device, and then the device "freaking out" (to put it politely).
So, if there's software that came with Echo where you can change the clock settings, you might want to set it to 96 kHz there first, and then Audition CS5.5 should just go along with 96 kHz. -
Error with IBAN Generation not possible
hello
In transaction XK01, when I create a vendor in bank details I have an error when I add the IBAN. This vendor is Spanish.
If I create directly the IBAN I have this message : " Generation not possible". Why.
But if I create this supplier by entering the first :
- County,
- Bank key
- Bank account
- CK
The iban be generated without errors.
I set this bank in FI01.
Could you help me.
Best regardshi, I am using ECC500 and I just follow following instructions.
It is working fine.
Cheers
>
SAP Note 503182:
>Solution
> 1. Copy function module SAMPLE_INTERFACE_00003030
> from SAMPLE_INTERFACE_00003030
> to CONVERT_BANK_ACCOUNT_2_IBAN_ES
> Function group: IBAN
> 2. Copy function module SAMPLE_INTERFACE_00003040
> from SAMPLE_INTERFACE_00003040
> to CONVERT_IBAN_2_BANK_ACCOUNT_ES
> Function group: IBAN
> 3. Implement the attached source code corrections.
> 4. BTE setting:
> Transaction: FIBF
> Settings -> P/S function modules
> Create the following entries:
> Event Country Function module
>00003030 ES CONVERT_BANK_ACCOUNT_2_IBAN_ES
> 00003040 ES CONVERT_IBAN_2_BANK_ACCOUNT_ES -
I had bought two Network Drives so I could watch my own movies anywhere in my house and clear up the clutter of all the DVDs, Blurays and CDs, Works greate with the PS3, Bought the Apple TV version 3 because it was smaller and resently bought the IPAD 3 and have the IPHONE 4S and other apple products.
My wish is to access my Network drives with the Apple TV - I have herd of Jailbreaking it (Not Avalible from where I can tell for the Version3) - but why didn't Apple ever think of accessing a Network drive and is their a work around for this? Should I just shutup and wait till Jail Breaking is avalible for the Version 3?.
Thank you for any helplongbeachjoe wrote:
......but why didn't Apple ever think of accessing a Network drive and is their a work around for this?
I'm sure they did think of it, but quickly discarded the idea because of the horrendous user experience this causes. -
Reopening Scene Menu for DVD's with chapters is not possible
Cannot reopen the scene menu after stopping play in a chapter and neither TV or DVD players help. How can I go back to scene menu direct without going through the main menu? Thanks for helping.
dallasosborne
You cannot do what you describe with a DVD-VIDEO with menu on DVD disc created in Premiere Elements (any version).
The best that I can do, after I stop the playback of a scene midway into it, is to hit submenu to get be back to the
main menu page and there hit Scene Selection to get to select another scene.
Until proven otherwise, I do not believe it is possible for you to do what you describe with your Premiere Elements DVD-VIDEO disc menus.
ATR
Add On...I did not see SG's post until after I had posted mine. -
Modifying workflow created with podcast composer not possible?
I want to modify a workflow created with podcast composer. Whenever I modify the template.plist the podcast producer stops working (I get an xgrid error and the task is not even shown as failed in xgrid).
Even if I revert the change and the template.plist goes back to original the podcast producer refuses to work..... (same error as above). Restarting podcast producer does not help.
Also other workflows don't work anymore.
the only option is to overwrite the workflow by deploying it again from the podcast composer, restarting the podcast producer and then it's fine again.
any help, how I can modify my template.plist ??
thanks
ThierryYou CAN modify the workflows. The easiest way is to make a head start with Podcast Composer. Do everything you can in Podcast Composer and save the workflow locally. Now open the workflow package and edit template.plist. After you have edited the workflow you can no longer open it in Podcast Composer, so use the command line tool 'pcast' to upload the workflow:
pcast --installworkflow --path <path to workflow bundle>
pcast does a validation on the workflow for you and if you did something wrong it gives good hints on where to look in template.plist for the mistakes.
Especially when you are using encrypted passwords and stuff it is better to do that first in Podcast Composer and edit it after that by hand. Make sure you make, edit and upload the workflow on the same machine, logged in always as the same user. Passwords are stored in the local keychain and pcast needs to access these when uploading. Good luck! -
ASR9K access with ssh does not work.
Hi all, I have a ASR9001 enabled SSH server, it was working fine but when I try to access these messages appear:
P/0/RSP0/CPU0:Apr 21 05:31:41 : SSHD_[65747]: %SECURITY-SSHD-3-ERR_GENERAL : Failed to allocate pty
RP/0/RSP0/CPU0:Apr 21 05:31:43 : devc-vty[181]: %MGBL-TTY-3-KERNEL : Unexpected internal error encountered 'Resource temporarily unavailable' : pkg/bin/devc-vty : (PID=557258) : -Traceback= 4bc37e70 4de37b0c 4de3c3d4 4bc3a2d0 4bc3df28 4bc3540c 4bc3cd00 4ba74650 4ba7514c 4ba702c8 4bc5754c 4bc58464 40000130 40000d18
RP/0/RSP0/CPU0:Apr 21 05:31:43 : devc-vty[181]: %MGBL-VTY-3-SESSION : Error performing TTY session operation 'Checking access parameters for VTY': a194060d, ''tty-server' detected the 'fatal' condition 'TTY SERVER INTERNAL: Unknown error condition': Permission denied'
In the cisco page gives no recommendation for this, any comments for this?
regardsWhile I can not explain the details of the messages, it is very clear that there is some type of error (probably a software issue more likely than a hardware issue). This relates to the part that says "Unexpected internal error" and to the presence of traceback information. In my experience traceback is always related to a software issue.
Is this perhaps a transient (temporary) problem and after a while SSH worked again? Or is the problem continuing?
As a workaround it might help to reload the router. That might restore normal function for SSH. I believe that a longer term solution will involve upgrading to different code. If the router is covered by a maintenance contract it would be good to open a TAC case on this and get a more authoritative explanation than I am able to give.
HTH
Rick -
Printing PDF files with smb/cups not possible // SLPReg status -20!
Hello *,
i am running SAMBA 3.6.1-1 and CUPS 1.5.0-1 on a dedicated system. Printer: Canon Pixma IP4500 (USB).
The problem is that all Windows 7 clients are not able to print PDF files (since few months) on that printer while printing these files with Linux software is no problem. The PDF files are neither encrypted nor forbidden to print.
I tried to print with Adobe Acrobat Reader X (latest) and Foxit Reader. Both are preparing the pages to be printed and close their printing dialog after processing. Windows printing queue does not show any jobs (which it even does not when printing simple images with MS Paint, which is not a problem).
Windows systems are using the Canon Inkjet 4500 and Canon iP 4500 driver (manually installed). Printing images works with both drivers.
I searched for "SLPReg […] failed with status -20!" but found no helpful information.
/var/log/cups/error_log
D [24/Dec/2011:23:05:35 +0100] Report: clients=0
D [24/Dec/2011:23:05:35 +0100] Report: jobs=499
D [24/Dec/2011:23:05:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:05:35 +0100] Report: printers=2
D [24/Dec/2011:23:05:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:05:36 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:05:36 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:05:48 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:05:48 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:07 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:07 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:19 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:19 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:35 +0100] Report: clients=0
D [24/Dec/2011:23:06:35 +0100] Report: jobs=499
D [24/Dec/2011:23:06:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:06:35 +0100] Report: printers=2
D [24/Dec/2011:23:06:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:06:38 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:38 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:50 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:50 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
/etc/samba/smb.conf
load printers = yes
printing = cups
printcap = cups
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 22:25
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer IP4500>
UUID urn:uuid:f9850f70-d898-39ad-4e0a-9edfecf4977b
Info Canon iP4500 series
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1306084752
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
DenyUser xy
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer IP4500_Duplex>
UUID urn:uuid:14fcd3ca-2118-380e-5033-79beb09bb3b7
Info Canon iP4500 series (Duplex)
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1324761079
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>Hi,
I can, unfortanetly, confirm this problem for me with a Brother HL-2030 and an HP Officejet 5600 series.
cups error log
D [03/May/2012:21:42:46 +0200] Report: printers=3
D [03/May/2012:21:42:46 +0200] Report: printers-implicit=0
D [03/May/2012:21:42:46 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:42:46 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:42:46 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:43:48 +0200] Report: clients=0
D [03/May/2012:21:43:48 +0200] Report: jobs=233
D [03/May/2012:21:43:48 +0200] Report: jobs-active=0
D [03/May/2012:21:43:48 +0200] Report: printers=3
D [03/May/2012:21:43:48 +0200] Report: printers-implicit=0
D [03/May/2012:21:43:48 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:43:48 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:43:48 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:44:50 +0200] Report: clients=0
D [03/May/2012:21:44:50 +0200] Report: jobs=233
D [03/May/2012:21:44:50 +0200] Report: jobs-active=0
D [03/May/2012:21:44:50 +0200] Report: printers=3
D [03/May/2012:21:44:50 +0200] Report: printers-implicit=0
D [03/May/2012:21:44:50 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:44:50 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:44:50 +0200] Report: stringpool-total-bytes=192536
printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 13:14
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer CUPS-PDF>
UUID urn:uuid:ad99f5dd-2577-355f-759c-6b2941a88d34
Info Virtual PDF Printer
Location Zion
MakeModel Generic CUPS-PDF Printer
DeviceURI cups-pdf:/
State Idle
StateTime 1309396700
Type 8450124
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HL2030>
UUID urn:uuid:1b453a5d-ade0-3ddb-45e4-c5bcfe1feabd
Info Brother HL-2030 series
Location Zion
MakeModel Brother HL-2030 Foomatic/hl1250 (recommended)
DeviceURI usb://Brother/HL-2030%20series?serial=G6J274210
State Idle
StateTime 1324728260
Type 8433668
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HP5600>
UUID urn:uuid:8d882659-3c7e-319f-5072-38d14683cfaf
Info HP Officejet 5600
Location
MakeModel HP Officejet 5600 Series, hpcups 3.11.10
DeviceURI hp:/usb/Officejet_5600_series?serial=CN838F31ZQ04B2
State Idle
StateTime 1324728896
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
smb.conf
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
Did you find a solution in the meantime? -
Whilst connected to the internet (reading news and sending messages) I cannot upgrade my Ipad with an error message that my device is not connected to internet. Update server can not be reached?
Any ideas.
Ipad 1, version 4.2.1I tried resetting the ipad, switched off wifi, checked date and time.
-
Return Order Creation with Multiple Lines not possible - EHP3
Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order(BT120H_CPL/NewComplEF ), the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
RohitI hope you have tried.If not can you please try with below qualifier
'015' Billing Document Number of Invoicing Party
Provide the billing document EEDK02-BELNR.
Also give qualifier at item level
E1EDP02 : use Qualifier =15
Provide the Billing document number at E1EDP02_BELNR and item at ZEILE.
I am not sure what is error you are getting when you are referencing billing document.If something STD Idoc is not working as you expected use your custom logic to bring the data when you are posting the Idoc.
I have not worked on sales order process,But I have worked on Purchase Order creation process.
Please let me know the error ,If i know the error i will defiantly help you.
Maybe you are looking for
-
Help Migrating from OS 8.6 to Mac Mini
I wish to migrate to latest Mac Mini from my old, basic 9600 with OS 8.6 in the easiest and quickest way possible which is suitable for a novice on anything except my current system. Current system includes Viewsonic P815 monitor and HP LaserJet 5MP
-
Profit center is not appearing in FBL5N t code
Hi Friends, My business(ECC 6) is posting customer JV in f-02 .he is givivng profit center and costcenter while posting document . After that run FBL5N t code in that list for particular coustomer code profit center is not appearing .... why it is no
-
a PDF application downloads succesfully via firefox. I open it and a pop up comes up telling me my windows installer is not suitable. i have service pack4 on my w2k and cannot see why firefox cannot open the docs, any ideas?
-
How can I get an Image's resolution?
how can i get the resolution of images been read into my paint application?
-
How can I rearrange my email accounts ?
I would like to change the order of the listing of my accounts as displayed on the left of the Thunderbird email screen. Can this be done? If so, how? Thanks!!