ARD client connection to pc fails

The PC Admin at work set up both the home MacBook Pro 10.5.8 and the networked work PC. Firing up the Mac at home gives: The Mac cannot connect because the Windows-based computer cannot be found. Verify that you typed the correct computer name or IP address, and try connecting again.
I have checked the network VPN settings and need some help. Thanks folks

Then you're in the wrong forum. This one is for questions about Apple Remote Desktop, Apple's software for managing networked Macintosh systems. Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Regards

Similar Messages

11g client connection to XE fails

Hi,
I have installed the 11g client beta and Oracle XE on the same system running Vista Ultimate.
The 11g client can connect to Oracle 9i running on remote systems.
The XE sqlplus can connect to the local XE instance (and remote Oracle instance).
When I try to connect my application to the XE instance I get an exception:
Oracle.DataAccess.Client.OracleException: ORA-12532: TNS:invalid argument
In sqlnet.log I get:
Fatal NI connect error 12532, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=now2)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=XE)(CID=(PROGRAM=C:\Windows\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe)(HOST=NOW2)(USER=nisse))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.4.0 - Beta
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.4.0 - Beta
Time: 28-AUG-2007 10:54:48
Tracing not turned on.
Tns error struct:
ns main err code: 12532
TNS-12532: Message 12532 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 12560
nt main err code: 502
TNS-00502: Message 502 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 51
nt OS err code: 0
The connecting string I use is: "Data Source=(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = now2 ) (PORT = 1521)) )(CONNECT_DATA = (SERVER=DEDICATED) (SERVICE_NAME = XE )));Max Pool Size=16;Connection Timeout=15;User Id=nisse;Password=XXX"
When I change HOST and SERVICE_NAME it works perfectly well to connect to a remote Oracle instance.
Disabling the local firewall does not help.
In the PATH, the 11g client path comes before the XE path. (No ORACLE_HOME set)
Any ideas?
Thanks!

Strange. I have 10g XE with the 11g ODAC beta, but I can connect using localhost as my TNS host name. Another solution may be using the IP address for localhost: 127.0.0.1
One thing to keep in mind is that SQLPlus comes with 10gXE, not 11g ODAC beta. So, the version of SQLPlus you are using is really from the 10g Home.
Ming Man,
It sounds like you need to copy over a tnsnames.ora file to your new ODP.NET 11g Home or some other general Oracle connectivity configuration not set.

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Thin Client connection not failing over

I'm using the following thin client connection and the sessions do not failover. Test with SQLPLUS and the sessions do fail over. One difference I see between the two different connections is the thin connection has NONE for the failover_method and failover_type but the SQLPLUS connection show BASIC for failover_method and SELECT for failover_type.
Is there any issues with the thin client the version is 10.2.0.3
jdbc:oracle:thin:@(description=(address_list=(load_balance=YES)(address=(protocol=tcp)(host=crpu306-vip.wm.com)(port=1521))(address=(protocol=tcp)(host=crpu307-vip.wm.com)(port=1521)))(connect_data=(service_name=ocsqat02)(failover_mode=(type=select)(method=basic)(DELAY=5)(RETRIES=180))))

You have to use (FAILOVER=on) as well on jdbc url.
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1292
Example: TAF with Connect-Time Failover and Client Load Balancing
Implement TAF with connect-time failover and client load balancing for multiple addresses. In the following example, Oracle Net connects randomly to one of the protocol addresses on sales1-server or sales2-server. If the instance fails after the connection, the TAF application fails over to the other node's listener, reserving any SELECT statements in progress.sales.us.acme.com=
(DESCRIPTION=
*(LOAD_BALANCE=on)*
*(FAILOVER=on)*
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales2-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic))))*
Example: TAF Retrying a Connection
TAF also provides the ability to automatically retry connecting if the first connection attempt fails with the RETRIES and DELAY parameters. In the following example, Oracle Net tries to reconnect to the listener on sales1-server. If the failover connection fails, Oracle Net waits 15 seconds before trying to reconnect again. Oracle Net attempts to reconnect up to 20 times.sales.us.acme.com=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic)*
*(RETRIES=20)*
*(DELAY=15))))*

Failed to create new JCO client connection WD_FLIGHTLIST_RFC_METADATA_DEST:

I tried the demo in SDN, but failed .
Why?

Sorry I forget posting the msg:
for WD_FLIGHTLIST_MODELDATA_DEST:
nnection for 'WD_FLIGHTLIST_MODELDATA_DEST' was sucessfully tested with user 'ZZHZHU'
But :
for WD_FLIGHTLIST_RFC_METADATA_DEST:
Failed to create new JCO client connection WD_FLIGHTLIST_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:140) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:286) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:252) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:100) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:299) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java:321) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for WD_FLIGHTLIST_RFC_METADATA_DEST at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:664) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:508) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:247) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:221) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:138) ... 31 more Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:474) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:558) ... 36 more

JCo client connection Failed to create new JCO client connection

hi All
I am trying to create a new JCO destination ion CE7.1 webdynpro content Admin. but I am getting following error.
Exception while creating JCo client connection Failed to create new JCO client connection weter: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ACCESS_DENIED: User is not in role LcrInstanceWriterLD at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:220) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:669) at ......
SLD is Up and running
CIM data is imported
Solution tried :
1) As no role wtih name LcrInstanceWriterLD was existing in the server ,hence created a new role with same name and assigned the LCR related action . Assigned the role to the user through which we are creating JCOs.
But we still getting the same error.
regards
Poonam

Hi Poonam!
Got to dig in the past a bit, I remember Users being able to create SLD object have to have certain permissions set in the J2EE UME. Simple Admin rights do not suffer, if I recall right.
Unfortunately I cannot go further in detail because this issue has been solved by a long gone collegue of mine.
Good luck anyway!
Jürgen

Exception while creating JCo client connection Failed to create

Hello all -
I am trying to create JCo metadata connections and I am getting the below error trace.
Exception while creating JCo client connection Failed to create new JCO client connection SAP_R3_HumanResources_Metadata: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to change password for key SAP_R3_HumanResources_Metadata in secure storage at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:149) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:299) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:265) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.storeObject(RemoteSecureStorageClientContextImpl.java:600) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:137) ... 33 more
Could anybody please suggest what is wrong with this creation?
Thanks much!!

Hi Maria,
Please update the host and sevice file first then check the SLD test and SLD Data supplier in visual admin.
Also check and verify the data using in the Jco destination creation.
Hope it will helps
Regards
Arun Jaiswal

What should be done when client.connect() failed?

Hi guys,
I am using JCO to connect backend System. If client.connect() is called and for certain reason failed, what should I do to roll back the action so that the system keeps normal. I think client.disconnect is not the solution, because connect is not successful. I encountered this problem, and my portal is totally down, what should I do to avoid this situaltion?
My code is
try{
          client.connect();
catch (JCO.Exception e){
//WHAT SHOULD BE DONE HERE?
     System.exit(1);
Thanks in advance!
Regards,
Liying

Hi,
Can you try this code.
class JCOConnector {
private JCO.Client mConnection = null;
// loginParams will settings for connection
public static boolean connect(Properties loginParams) {
boolean returnCode = false;
          try {
               mConnection = JCO.createClient(loginParams);
               long timeBeforeConnecting = System.currentTimeMillis();
               mConnection.connect();
               long timeAfterConnection = System.currentTimeMillis();
               returnCode = true;
          } catch (Exception e) {
               try {
                    disconnect();
               } catch (Exception e2) {
               throw new RuntimeException(e);
          return returnCode;
      * To Disconnect from the middleware.
     public static boolean disconnect() {
          boolean returnCode = false;
          if (mConnection != null) { // if connection exists
               try {
                    mConnection.disconnect();     // disconnect from the middleware
                    returnCode = true;
               }catch (Exception e2) {
               }finally {
                    mConnection = null;
          }else{
               returnCode = true;
          return returnCode;
Regards,
Ashwani

ConfigMgr Clients connection over direct access.

My test client machine is running Windows 8.1 and connecting to network through Direct Access. I am running SCCM 2012 R2 on Windows Server 2012.
Test Machine: NYWIN8
SCCM Server: SCCM01
Domain: demo.local
I would like to understand how configmgr handles clients connecting through direct access. What all functionality is available for such clients?
On my client machine is see following errors:
FSPSTATEMESSAGE.LOG
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
POLICYAGENT.LOG
Policy
http://SCCM01.demo.local/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 is not available.
DATATRANSFERSERVICE.LOG
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{C9AA0DDC-BD37-442D-A00E-EE7404D47C12}.tmp with error 0x80190194
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} partially completed 0/1 with error 0x80190194 context 5
Software Catalog Update Endpoint
Failed to open portal registry key 'Software\Policies\Microsoft\CCM'. maybe haven't been created yet. Error 0x80070002
WEDMTRACE.LOG
No CCM Identification blob
CAS.LOG
The number of discovered DPs(including Branch DP and Multicast) is 0
SMSCLIUI.LOG
Failed to set DNSSuffix value to the registry.
Are there any issues due to connecting using direct access?

When I try to deploy any software (7-ZIP or Notepad++) to this client I get following error:
The software change returned error code 0x87D00607(-2016410105).
I can deploy same software fine to other machines connecting on LAN.
Server Logs:
Portlctl
PORTALWEB's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
PORTALWEBs http check returned hr=0, bFailed=0
awbsctl
AWEBSVCs http check returned hr=0, bFailed=0
AWEBSVC's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
Client Logs:
CAS
The number of discovered DPs(including Branch DP and Multicast) is 0
CCMEVAL
Client's current MP is http://SCCM01.DEMO.local and is accessible
ClientLocation
Current AD forest name is Demo.local, domain name is Demo.local
Domain joined client is in Intranet
Rotating assigned management point, new management point [1] is: SCCM01.demo.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>
Assigned MP changed from <SCCM01.demo.local> to <SCCM01.demo.local>.
ContentTransferManager
No data since 11/13/2013
CTM job {F6085C09-4C39-489E-A6F6-2C268398B7F2} successfully processed download completion.
DataTransfer
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{22619283-47B1-445A-9262-C1FA54AD0F64}.tmp with error 0x80190194
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} partially completed 0/1 with error 0x80190194 context 5
Filebits
BranchCache Is Not Enabled
Failed to check PeerDistribution status. NOT able to do branch cache.
FSPSTATEMESSAGE
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
Successfully sent location services HTTP failure message.
InternetProxy
Failed to get proxy for url 'HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp'. Error 0x87d00215
InventoryAgent
Inventory: 9 Collection Task(s) failed.
SCCLIENT
Event maps to notification type = Application Enforcement Failed (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at EventWatcher_EventArrived)
SMSCLIUI
Failed to set DNSSuffix value to the registry.
IPCONFIG /ALL from CLIENT:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : NYWIN8
   Primary Dns Suffix . . . . . . . : demo.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : demo.local
   System Quarantine State . . . . . : Not Restricted
Ethernet adapter vEthernet (Internal):
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #3
   Physical Address. . . . . . . . . : 00-15-5D-01-0B-07
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::d3f:4e51:c648:7b26%26(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.123.38(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 872420701
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter vEthernet (External):
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DE
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::9cb5:5132:1f47:e7c6%24(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, January 2, 2014 1:27:53 PM
   Lease Expires . . . . . . . . . . : Saturday, January 4, 2014 12:27:55 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 730113736
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-E2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
   Physical Address. . . . . . . . . : E0-DB-55-D2-5E-59
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : iphttpsinterface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819(Preferred)
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:c598:7f17:e286:369d(Preferred)
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10(Preferred)
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 369098752
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{DC7D2C63-1506-49EC-A40F-AA4E56DE4001}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno      00
M sid        SED
M systemid   562 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    32
M intno      20020600
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          22784     (1752)
M DpShMCreate: sizeof(tm_adm)          5912704     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.024) Default value for max. input variables is 2000 (note 655018)
C    (0.024) Profile parameter to define max. input variables (note 655018)
C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C    (0.024) Input parameters for SQL statements increased (note 655018)
C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C    (0.018) More trace in case of packed to string conversion error (note 1262799)
C    (0.016) R3trans export aborts with signal 6 (note 1262245)
C    (0.009) IA64 alignment errors (note 1245982)
C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports keepAlive indicator   : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
M
M Info for wp 0
M
M    pid = 212
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 16 23:57:33 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10783
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key         :DEFAULT
Username    :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

BR0999E Loading of SQL client library orasql9.dll failed

Hi basis experts,
My SAP system is ECC 5.0 and the RDBMS is Oracle 10.2.0.2.0
I want to use transaction DB13 to make database backups, but it sendme
an error because it can´t connect to the database.
I try to use brtools to make a backup and sendme the error:
BR1001I BRSPACE 6.40 (39)
BR1002I Start of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0999E Loading of SQL client library orasql9.dll failed - please check
Oracle configuration
BR0310E Connect to database instance DES failed
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0280I BRSPACE time stamp: 2007-08-23 09.47.42
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them
or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-08-23 09.47.43
when I try to use any tool of brtools it sendme the same error all the
time.
I read that maybe I had an incorrect version of brtools, but in market
place I only found DBATOOLS Package for Oracle 9.2.x, this version
will work correctly with my Oracle 10.2.0.2.0????
How can I solve this problem??? Please helpme
Thanks in advance
Tania Rosas

ok,
go get BRTOOLS 7.00, you need that version to use brtools on Oracle 10g databases.
go at http://service.sap.com
entry by application group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
choose proper kernel version (32 or 64-bit unicode or not)
Message was edited by:
Eric Brunelle

ARD Client Settings are not saving in System prefs. Any thoughts?

I am using ARD 2.2 from my Powerbook. It is running 10.4.3. Was able to create connections for observing with a G5 iMac running 10.4.5 , another PowerBook (which required an ARD client upgrade) running 10.3.9, and a G3 iBook running 10.3.9 with no issues. When trying to configure a Mac mini running 10.3.9, I am able to enter the System Prefs as the admin, set ARD to run using the admin account (in the exact same fashion as the other machines), turn on all available options and click the OK button. I can then go right back to the Sharing control panel where ARD is turned on but none of the other settings, including the checked account remain active. Has anyone else seen this condition? I tried reinstalling ARD client 2.2 and deleting the remote desktop prefs to no avail. If anyone has any suggestions they would be greatly appreciated.

You might try fixing file permissions (using Disk Utility) on the mini. It kind of sounds like a permissions problem.

ORA-12518: TNS:listener could not hand off client connection

guys,
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connection
i had learned about this error here before, and i toke some notes as follows:
h2. listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:23:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_2\network\log\listener_bkp_1.log
Trace information written to C:\oracle\product\10.2.0\db_2\network\trace\listener_bkp_1.trc
Trace level is currently 0
Started with pid=2212
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WINXP)(PORT=1523)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-SEP-2009 01:24:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
25-SEP-2009 01:24:49 * (CONNECT_DATA=(SERVICE_NAME=financeira.winxp)(CID=(PROGRAM=C:\ORACLE?instantclient_10_2\sqlplus.exe)(HOST=PAULO_NOTEBOOK)(USER=ORACLE_DBA))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=51649)) * establish * financeira.winxp * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-SEP-2009 01:24:53 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
h2. lsnrctl services
C:\>lsnrctl services listener_bkp_1
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:33:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=WINXP)(PORT=1523)))
Services Summary...
Service "FINANCEIRA.WINXP" has 1 instance(s).
Instance "FINANCEI", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:1
LOCAL SERVER
The command completed successfully
h2. listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1521))
SID_LIST_LISTENER_BKP_1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER_BKP_1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1523))
h2. v$resource_limit
RESOURCE_NAME ; CURRENT_UTILIZATION ; MAX_UTILIZATION ; INITIAL_ALLOCATION ; LIMIT_VALUE
processes ; 26 ; 30 ; 150; 150
sessions ; 30 ; 35 ; 170 ; 170
2 rows selected
this means that it didn't reach the resource limites yet. What i can do to solve the problem ???
another important information is that connecting by the default listener LISTENER instead of the LISTENER_BKP_1 listener, the connection is completed successfully. There's enough SGA memory space too.
Tks,

Paulo_BR wrote:
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connectionDon't do Oracle on Windows, so I'm not sure how the following relates to the Listener dealing with a dedicated server connection request on Linux/Unix.
On Linux/Unix, a dedicated server request means just that - a dedicated process has to be started to service that client. The Listener does it by using the parameters of the configured listener.ora service to execute +$ORACLE_HOME/bin/oracle+. This process then starts up, and the Listener hands off the client connection for this process for servicing.
If there is a failure somewhere on this series of steps fail, the Listener throws the ORA-12518 exception. For example, the +$ORACLE_HOME+ has been incorrectly configured in listener.ora and it fails to execute and startup a dedicated server process.
And this relates to the underlying error you are seeing:
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directoryI think that the Listener on Windows uses the CreateRemoteThread() Win32 call to start up the server process thread. However, it needs a valid process identifier (of the existing Oracle instance) for this call - and thus needs to first identify the Oracle instance process. Could be that this step uses a ORACLE_HOME reference. And if that directory path is not valid, it is unable to identify the process id of the Oracle instance and thus unable to spawn a dedicated thread to service that client.

ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

Hi again,
I'm on my enterprise management console and Database Instance and Listener shows the green arrow, but the Agent Connection to Instance shows a red downward arrow and the error:
Status: Failed
Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
My OraClrAgnt service is up and running (using winxp pro, oracle 11gR2), I'm on my home pc, all my ports are open (my machine's name is "abigail" and it is dmzhost)
Any suggestions to resolve this error?
My Tnsnames ora:
ABIGAIL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl.0.0.10)
LISTENER_ORCL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SID = ORCL)
RMAN =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rman.abigail)
My listener.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\abigail
My SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES, LOCALHOST)
NAMES.TRACE_LEVEL = ADMIN
My alert file
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>10-OCT-2013 20:47:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=SYSTEM))(SERVICE_NAME=orcl.0.0.10)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=38289)) * establish * orcl.0.0.10 * 12518
</txt>
</msg>
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
</txt>
</msg>
My listener status and services
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                10-OCT-2013 22:47:58
Uptime                    0 days 0 hr. 2 min. 1 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
istener.ora
Listener Log File         e:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale
rt\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
The command completed successfully
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
    Handler(s):
      "D006" established:0 refused:0 current:0 max:800 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1312>
         (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1060))
      "D005" established:0 refused:12 current:0 max:800 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1288>
         (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1061))
      "D004" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1260>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1063))
      "D003" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1140>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1062))
      "D002" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 140>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1059))
      "D001" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1072>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1057))
      "D000" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 748>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1058))
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
The command completed successfully

I added this on my listener.ora
DIRECT_HANDOFF_TTC_LISTENER=OFF
Works now!
Moral of the story, google is ur friend lol. Thanks for the reply tho!

TNS:listener could not hand off client connection

while trying to select from dblink I got ORA-12518: TNS:listener could not hand off client connection
What should I do?
here is the listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = disater)(PORT = 1521))
)

What is the operating system and database version for remote and local machines.
Are you using dedicated or threaded server on the remoted DB. More information is needed.
output from error message search:-
12518, 00000, "TNS:listener could not hand off client connection"
// *Cause: The process of handing off a client connection to another process
// failed.
// *Action: Turn on listener tracing and re-execute the operation. Verify
// that the listener and database instance are properly configured for
// direct handoff. If problem persists, call Oracle Support.
// *Comment: The problem can be worked around by configuring dispatcher(s)
// to specifically handle the desired presentation(s), and connecting
// directly to the dispatcher, bypassing the listener.

ARD client connection to pc fails

Similar Messages

Maybe you are looking for