ARD does not work across subnets/VLANs
Hi,
I can't get ARD clients to update ARD across subnets.
I have an ARD workstation on VLAN 72, a task server on VLAN 1, and clients on VLANs 92, 94, 96, and 98.
I can use the network range scan to pick up clients on a vlan (say vlan 92) but when that client moves to another VLAN ARD loses the ability to communicate with it.
There are not ACLs or other filters on my L3 switch, and if I scan the new VLAN for ARD clients, it will pick up the machine that moved, and display the new IP address.
I also find that ARD can't deal with IP address changes even within the same subnet. Client 1 gets a new DHCP lease and a new address. ARD will lose track of the client and never find it again unless I perform a scan.
Since the ARD documentation is so crappy and unintuitive I don't know if the clients is supposed to report its new address to the ARD workstaionor the task server.
I just had an Apple Systems Engineer and a technician form Apple Professional Services onsite for two days. They couldn't figure out how to use ARD. If they can't figure it out, how am I supposed to figure it out?
I want my money back.
My dad has always used his full username, including domain, so there's nothing to change in terms of that.
According to AT&T's support website, his FastAccess DSL username/password should be unchanged and still work. That said, I believe I need to try changing the settings of his DSL modem to use bridge mode and then try the PPPoE configuration on the AEBSn again.
I think I remember my dad saying an AT&T service tech came out and tested his DSL line and may have done something to the modem which my dad claims he didn't. Reading about the specs of the DSL modem and the accounts of a few AT&T techs, the modem is supposed to be in bridge mode in order to work with a router that uses a PPPoE configuration for single NAT.
Thanks for your input!
Similar Messages
-
Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions
Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-DonaldTo prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features. -
Guest VM failover cluster on Hyper-V 2012 Cluster does not work across hosts
Hi all,
We are evaluating Hyper-V on Windows Server 2012, and I have bumped in to this problem:
I have a Exchange 2010SP2 DAG installed on 2 vms in our Hyper-V cluster (a DAG forms a failover cluster, but does not use any shared storage). As long as my vms are on the same host, all is good. However, if I live migrate or shutdown-->move-->start one
of the guest nodes on another pysical host, it loses connectivity with the cluster. "regular" network is fine across hosts, and I can ping/browse one guest node from the other. I have tried looking for guidance for Exchange on Hyper-V clusters but have not
been able to find anything.
According to the Exchange documentation this configuration is supported, so I guess I'm asking for any tips and pointers on where to troubleshoot this.
regards,
TrondHi All,
so some updates...
We have a ticket logged with Microsoft, more of a check box exercise to reassure the business we're doing the needful. Anyway, they had us....
Apply hotfix http://support.microsoft.com/kb/2789968?wa=wsignin1.0 to both guest DAG nodes, which seems pretty random, but they wanted to update the TCP/IP stack...
There was no change in error, move guest to another Hyper-V node, and the failover cluster, well, fails with the following event ids I the node that fails...
1564 -File share witness resource 'xxxx)' failed to arbitrate for the file share 'xxx'. Please ensure that file share '\xxx' exists and is accessible by the cluster..
1069 - Cluster resource 'File Share Witness (xxxxx)' in clustered service or application 'Cluster Group' failed
1573 - Node xxxx failed to form a cluster. This was because the witness was not accessible. Please ensure that the witness resource is online and available
The other node stays up, and the Exchange DB's mounted on that node stay up, the ones mounted on the way that fails failover to the remaining node...
So we then
Removed 3 x Nic's in one of the 4 x NIC teams, so, leaving a single NIC in the team (no change)
Removed one NIC from the LACP group on each Hyper-V host
Created new Virtual Switch using this simple trunk port NIC on each Hyper-V host
Moved the DAG nodes to this vSwitch
Failover cluster works as expected, guest VM's running on separate Hyper-V hosts, when on this vswitch with single NIC
So Microsoft were keen to close the call, as there scope was, I kid you not, to "consider this issue
resolved once we are able to find the cause of the above mentioned issue", which we have now done, as in, teaming is the cause... argh.
But after talking, they are now escalating internally.
The other thing we are doing, is building Server 2010 Guests, and installing Exchange 2010 SP3, to get a Exchange 2010 DAG running on Server 2010 and see if this has the same issue, as people indicate that this is perhaps not got the same problem.
Cheers
Ben
Name : Virtual Machine Network 1
Members : {Ethernet, Ethernet 9, Ethernet 7, Ethernet 12}
TeamNics : Virtual Machine Network 1
TeamingMode : Lacp
LoadBalancingAlgorithm : HyperVPort
Status : Up
Name : Parent Partition
Members : {Ethernet 8, Ethernet 6}
TeamNics : Parent Partition
TeamingMode : SwitchIndependent
LoadBalancingAlgorithm : TransportPorts
Status : Up
Name : Heartbeat
Members : {Ethernet 3, Ethernet 11}
TeamNics : Heartbeat
TeamingMode : SwitchIndependent
LoadBalancingAlgorithm : TransportPorts
Status : Up
Name : Virtual Machine Network 2
Members : {Ethernet 5, Ethernet 10, Ethernet 4}
TeamNics : Virtual Machine Network 2
TeamingMode : Lacp
LoadBalancingAlgorithm : HyperVPort
Status : Up
A Cloud Mechanic. -
APEX_UTIL.PREPARE_URL does not work across workspaces?
We are running ApEx 4.1.1 on Oracle 11g.
I am trying to call an application in another workspace and am using APEX_UTIL.PREPARE_URL in a hidden item and then a button with REDIRECT TO URL using javascript:popUp2 which uses the hidden item (the returned value of the PREPARE_URL. The code works fine if I am in the same workspace and a checksum is returned:
APEX_UTIL.PREPARE_URL('f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION');
returns:
f?p=9002:2:1400894538262901::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:9001,FRD_MASTER_BANSECR&c=STU_WS&cs=3190FB9A8CC967E5B3CED03460DF6F291
I can press the button and app 9002 opens in a new window.
When I try the same code in an application in another workspace, no checksum is returned:
APEX_UTIL.PREPARE_URL('f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION');
returns:
f?p=9002:2:8288147979401::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:112,Testing_Template&c=STU_WS
and I get the error:
Error Session state protection violation: This may be caused by manual alteration of a URL containing a checksum or by using a link with an incorrect or missing checksum.
I have also tried it without the workspace '&c=STU_WS' and explicitly passing the parameters, but no checksum is returned.
APEX_UTIL.PREPARE_URL(p_url => 'f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.',p_checksum_type => 'SESSION')
If I do not try to pass any parameters, no checksum is produced, but the button successfully opens app 9002 in a new window:
APEX_UTIL.PREPARE_URL('f?p=9002:4:&SESSION.::NO::&c=STU_WS','SESSION');
returns:
f?p=9002:4:8288147979401::NO:::&c=STU_WS
Again, the above code successfully opens app 9002 in a new window. In fact, when not passing parameters to app 9002, I would not seem to need to use PREPARE_URL.
BUT. I do need to pass the calling app id and the calling app name to app 9002, because 9002 looks up information about the calling app. Since, I must pass parameters, I must use PREPARE_URL, and it does not seem to work when you call it for an app in a different workspace.
Given all of the above, I have found a kludge. I call PREPARE_URL using the APP_ID of the current app and then replace that APP_ID with 9002.
replace(APEX_UTIL.PREPARE_URL('f?p=&APP_ID.:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION'),
'f?p=&APP_ID.:2','f?p=9002:2')
returns:
f?p=9002:2:8288147979401::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:112,Testing_Template&c=STU_WS&cs=33B2BB2ECFE3555198CE3325CCF9F67B8
And the button opens app 9002 just fine.
Is there anyway to get PREPARE_URL to work with apps in another workspace? What am I missing? Is there a better way than the kludge I came up with?
A little more information: my app 9002 is a help & info for ApEx DBAs and Developers. It is my attempt at code reuse. Calls to 9002 are in a master template. I can continually update and change the help in 9002 without having to update the apps that call it.
Thanks for your help,
Chrislewisc3 wrote:
We are running ApEx 4.1.1 on Oracle 11g.
I am trying to call an application in another workspace and am using APEX_UTIL.PREPARE_URL in a hidden item and then a button with REDIRECT TO URL using javascript:popUp2 which uses the hidden item (the returned value of the PREPARE_URL. The code works fine if I am in the same workspace and a checksum is returned:
APEX_UTIL.PREPARE_URL('f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION');
returns:
f?p=9002:2:1400894538262901::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:9001,FRD_MASTER_BANSECR&c=STU_WS&cs=3190FB9A8CC967E5B3CED03460DF6F291
I can press the button and app 9002 opens in a new window.
When I try the same code in an application in another workspace, no checksum is returned:
APEX_UTIL.PREPARE_URL('f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION');
returns:
f?p=9002:2:8288147979401::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:112,Testing_Template&c=STU_WS
and I get the error:
Error Session state protection violation: This may be caused by manual alteration of a URL containing a checksum or by using a link with an incorrect or missing checksum.
I have also tried it without the workspace '&c=STU_WS' and explicitly passing the parameters, but no checksum is returned.
APEX_UTIL.PREPARE_URL(p_url => 'f?p=9002:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.',p_checksum_type => 'SESSION')
If I do not try to pass any parameters, no checksum is produced, but the button successfully opens app 9002 in a new window:
APEX_UTIL.PREPARE_URL('f?p=9002:4:&SESSION.::NO::&c=STU_WS','SESSION');This is wrong because you are passing string SESSION for url_charset parameter, that's why id is not adding any checksum
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#AEAPI160
returns:
f?p=9002:4:8288147979401::NO:::&c=STU_WS
Again, the above code successfully opens app 9002 in a new window. In fact, when not passing parameters to app 9002, I would not seem to need to use PREPARE_URL.
BUT. I do need to pass the calling app id and the calling app name to app 9002, because 9002 looks up information about the calling app. Since, I must pass parameters, I must use PREPARE_URL, and it does not seem to work when you call it for an app in a different workspace.
Given all of the above, I have found a kludge. I call PREPARE_URL using the APP_ID of the current app and then replace that APP_ID with 9002.
replace(APEX_UTIL.PREPARE_URL('f?p=&APP_ID.:2:&SESSION.::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:&APP_ID.,&G_APP_NAME.&c=STU_WS','SESSION'),
'f?p=&APP_ID.:2','f?p=9002:2')
returns:
f?p=9002:2:8288147979401::NO::P2_CALLING_APP_ID,P2_CALLING_APP_NAME:112,Testing_Template&c=STU_WS&cs=33B2BB2ECFE3555198CE3325CCF9F67B8
And the button opens app 9002 just fine.
Is there anyway to get PREPARE_URL to work with apps in another workspace? What am I missing? Is there a better way than the kludge I came up with?
A little more information: my app 9002 is a help & info for ApEx DBAs and Developers. It is my attempt at code reuse. Calls to 9002 are in a master template. I can continually update and change the help in 9002 without having to update the apps that call it.
Review all above API calls and make sure you pass right parameters -
Multicast Does not work between different VLANS
Hi,
I have problems with multicast. On the same VLAN i can see the SAP announcement in VLC and play, but on different VLAN i can see SAP but i cant play it. The play turn to pause and the video doesn´t appear.
I have 2 Cisco 6500 switch CORE with GLBP configured but not working. In the second switch i have all interfaces in shutdown. The first core switch have L3 routing enable.
The Global configurations:
ip multicast-routing.
I have the transmitter PC on vlan 51 i transmit to 230.0.0.50 group an im trying to recive on vlan 80. The vlans configurations are:
Vlan 51
ip address x.x.31.254 255.255.255.0
ip pim sparse-dense-mode
Vlan 80
ip address x.x.80.1 255.255.255.0
ip pim sparse-dense-mode
I have 2 Cisco 2960 (L2 only) for the access.
The principal commands outputs are:
CORE1#show ip mroute | inc 230.0.0.50
(*, 230.0.0.50), 01:50:50/00:02:21, RP 0.0.0.0, flags: DC
CORE1#
CORE 1
interface Vlan1
ip address x.x.1.1 255.255.0.0
ip access-group 101 out
no ip unreachables
ip pim sparse-dense-mode
mls rp ip
interface Vlan51
ip address x.x.31.254 255.255.255.0
ip access-group 151 out
ip helper-address x.x.x.x
ip helper-address x.x.x.x
no ip unreachables
ip pim sparse-dense-mode
mls rp ip
interface Vlan80
ip address x.x.80.1 255.255.255.0
ip access-group 150 out
no ip unreachables
ip pim sparse-dense-mode
glbp 80 ip x.x.80.254
glbp 80 timers 5 18
glbp 80 timers redirect 600 7200
glbp 80 priority 254
glbp 80 preempt delay minimum 60
glbp 80 authentication text glbpkey
glbp 80 forwarder preempt delay minimum 60
CORE2
interface Vlan1
ip address x.x.1.4 255.255.0.0
ip access-group 101 out
no ip unreachables
ip pim sparse-dense-mode
mls rp ip
interface Vlan51
ip address x.x.31.2 255.255.255.0
ip access-group 151 out
ip helper-address x.x.x.x
ip helper-address x.x.x.x
no ip unreachables
ip pim sparse-dense-mode
shutdown
mls rp ip
glbp 51 ip x.x.31.254
glbp 51 timers 5 18
glbp 51 timers redirect 600 7200
glbp 51 preempt delay minimum 60
glbp 51 authentication text glbpkey
glbp 51 forwarder preempt delay minimum 60
interface Vlan80
ip address x.x.80.2 255.255.255.0
ip access-group 150 out
no ip unreachables
ip pim sparse-dense-mode
shutdown
mls rp ip
glbp 80 ip x.x.80.254
glbp 80 timers 5 18
glbp 80 timers redirect 600 7200
glbp 80 preempt delay minimum 60
glbp 80 authentication text glbpkey
glbp 80 forwarder preempt delay minimum 60
end
Someone can help?
Thanks,
AlfredoHi johnd...
Im using VLC 1.1.2 (i can not update because i have a DVDT2 card to capture the digital terrestrial television and it only work in this version). I have all the firewalls down.
This is the output for the show ip igmp snooping groups on the 2960.
80 230.0.0.50 igmp v2 Gi1/0/21, Gi1/0/24
Port G1/0/21 is where the receiver is conected and the 24port is the trunk.
Jon, i revert and this is the output. I put the ip pim rp-address the same of the lookpback that i create previously.
(*, 230.0.0.50), 00:37:46/00:02:19, RP 192.168.230.230, flags: SJC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan80, Forward/Dense, 00:09:52/00:00:00
The strange thing is that I have more than 40 vlans and it only fail in some vlans like 80. -
Share Screen on ARD Does not work unless the user is logged on
Since Upgrading to Lion, I have been unable to get the Share Screen in Apple Remote Desktop fuction working from Any machine. All Clients are on the latest agent of ARD and are completely upto date.
When i try running the task when the clients are at the login screen, They just get a grey bar at the top of their screens. So it is recieveing the share screen task but not updating the image on the client machines.
The only alternative is to get the users to login before we start the share screen task in ARD. The issue with this is teachers prefer to be able to put work onto the screens before the pupils have a chance to log in and mess around on the machines.
I have tried downgrading to ARDagent 3.4 on the clients, i have also tried turning off remote management and enabling again, like some have suggested.
It would be great if someone has found a solution to this.
Thanks.To get better help sooner, post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
To post code, use the code tags -- [code]Your Code[/code] will display asYour CodeOr use the code button above the editing area and paste your code between the {code}{code} tags it generates.
db -
Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?
Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.
-
Dynamic image in the template builder plug-in does not work
Hi all,
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
+...This works obviously+
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
+...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}+
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
+...This, however, does not work.+
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1
Edited by: oeren on Jun 8, 2011 12:28 AMOeren,
I stumbled across this little tidbit buried in the BI Publisher forum: Dynamic Images in rtf
Glad you are up and running!
Joshua -
IPhone 3G - 3G Does not work after upgrading to 4.2.1
Once again Apple has screwed something up. Upgraded to 4.2.1 on Friday and now my 3G reception does not work. I've factory restored and still no good. Whats up with the quality control these days? Seems as if every software update across iOS and Mac OS/X has at least 1 major flaw.
Does Apple read these posts?my problem is more curious i use 4.2.1. on a 3g iphone which is "open" from italy
my network is kpn/simyo
4.2 everything worked... no tethering offered
4.2.1. most apps including safari weather etc are not able to use the data network,but the NS dutch railways app is able to use the data connection
and suddenly i get offered tethering in the network settings
But the screen for manually set your network settings is disappaered, so as my provider cant send setup files to my phone makes it impossible to manually setup a phone network, which is strange for an "open" never been locked iphone
Will see what happens the next day as there are more buggs reported about network and 4.2.1.
WIFI works perfectly....
Was planning to buy an iphone 4 but if apple cant guarantee the use of what you buy..... by issuing software with flaws..... If they would just offer a downgrade option for software.. -
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction. -
Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work
Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David -
Wireless printing on HP 6500A Plus -wireless does not work
windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Mac os 10.4.10 software update problem -- my mac does not work anymore :(
hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695 -
In "Show more Bookmarks" if I right click does not work (I want to open in a new tab)
This is using Mac Firefox current version. I use lots of tabs and don't have space for all of them so there is a >> at the right end for clicking and displaying the rest of them. If I click and display list and highlight one of them, the right click does not work - I want to open in a new tab not use the existing - there are no menu options displayed on these tabs. The tabs across the top work fine for this
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
MAC Authentication does not work
My MAC Authentication does not work.
I have a ACS 3.0 server set. the MAC address is set in the user name field and in the password field.
I can ping the ACS, I can ping my AP, I can ping my client.
I don't want WEP and I don't want LEAP just MAC. So I set my authentication to "Open with MAC" My client has WEP set to NO WEP and authentication to OPEN
I have the latest drivers for both AP and my 350 Client.
I see that the client is associating and disassociating back and forth non stop. My AP log is full with the following message:
Station 0009.7c9f.xxxx Authentication failed
this is my config:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname GOM_1200IOS
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 10.1.2.197 auth-port 1812 acct-port 1812
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius wlccp_rad_infra
aaa group server radius wlccp_rad_eap
aaa group server radius wlccp_rad_leap
aaa group server radius wlccp_rad_mac
aaa group server radius wlccp_rad_any
aaa group server radius wlccp_rad_acct
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login wlccp_infra group wlccp_rad_infra
aaa authentication login wlccp_eap_client group wlccp_rad_eap
aaa authentication login wlccp_leap_client group wlccp_rad_leap
aaa authentication login wlccp_mac_client group wlccp_rad_mac
aaa authentication login wlccp_any_client group wlccp_rad_any
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa accounting network wlccp_acct_client start-stop group wlccp_rad_acct
aaa session-id common
enable secret xxxxxx
username Cisco password xxxx
ip subnet-zero
iapp standby timeout 5
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 9DF1C10BF11A transmit-key
ssid GOM_1230
authentication open mac-address mac_methods
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
channel 2462
station-role root
no cdp enable
dot1x reauth-period server
dot1x client-timeout 600
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.43.45 255.255.240.0
no ip route-cache
ip default-gateway 172.16.47.254
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
access-list 700 permit 000a.b74c.e8c9 0000.0000.0000
access-list 700 permit 0009.7c9f.d6e0 0000.0000.0000
access-list 700 permit 0006.25b1.2f79 0000.0000.0000
access-list 700 permit 000a.b78b.2d19 0000.0000.0000
access-list 700 permit 000b.5f6e.77c8 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
access-list 701 deny 000b.5f6e.77c8 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
no cdp run
snmp-server community GOM_AP1230 RO
snmp-server enable traps tty
radius-server local
group AP1230
user brazil nthash 7 1249523544595F517972017912677A3055325A25770B08770D5C5B4E4478087605 group AP1230
radius-server host 10.1.2.197 auth-port 1812 acct-port 1812 key 7 00233C2B
radius-server retransmit 3
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
end
What is wrong?
Thanks very much for your help.I figured out what was wrong so thank you for stopping by.
I will publish the config for other people to see.
Regards,
Maybe you are looking for
-
Firefox crashes when starting up, does work in savemode.
Firefox crashes most of the time when you start it up. I've already done a whole lot of things, like: -updating everything (firefox, plugins, addons). -removing addons -disabling / turning off plugins It does NOT happen in save mode, so that makes yo
-
How can You create a rescue email if you already have an Apple ID/account?
I didn't think about it, thought I didn't need it, but now I know. I forgot my security answers, and I keep getting locked. I need a way to create a rescue account if I already have an Apple ID/account. I won't click on any links unless it directs me
-
Elitepad 1000 G2 external monitor resolution problem
Hey guys, Recently I got this elitepad 1000 g2 window 8.1 tablet, I connected hp lv1911 monitor using docking station with it, however the highest resolution is only 1366x768 for the external monitor. I have tried to update all windows updates, an
-
Minimum hardware for 'voice' lab ? - Please answer.
Hi, I've got (3) C2610's running IP Plus IOS 12.3. I also have (2) Cat 2912XL. If I want to play with VoIP configurations, how much am I going to miss if I don't have a Layer 3 switch ? I mean, the Cat 3550 is kind of a little expensive for me and th
-
How to get the tv icon back on my Apple TV
TV icon is gone