ARD on my laptop not displaying both monitors on my desktop

I'm running ARD 3.2 on both my Macbook Pro laptop, and Macpro desktop. Both are running the latest version of Leopard. My desktop has dual monitors, and it seems before I upgraded to Leopard, ARD on my laptop would display BOTH of my desktop monitors (scaled down, of course). However recently, it stared to only display the desktop's primary monitor, and not even detect or display the second. I've been pulling my hair out trying to find a relevant setting, and searching the forums for someone with this issue. Does anyone know what's going on? Please let me know. Thanks in advance!

For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Similar Messages

Laptop not recognizing 2nd monitor U410

Ever since my windows 8.1 upgrade (?) My laptop has not recognised any external monitor through my HDMI port.
Upon drive installation it will work but after a reboot i am in the same position again and have to re-install the graphics driver.
my ideapad is U410.
It Worked fine (with regard to graphics) at Windows 8.0 problems started after upgrade to 8.1
My connector on the Idea pad is HDMI whilst the connector on the monitor is DVI (i have tried two different cables both give the same result.
If anyone has any advice i would greatly appreciate it.

So, I need to you to try a couple of things first before we figure out the actual problem.
1. Connect the cable to your second display and navigate to Control Panel.
2. Click on Display and Then on Change Display Settings.
Q - Do you see your laptop display and the external display listed there?
If Yes, then select the external display, set the resolution and Click Ok.
(Whether you want to duplicate displays or use either one is up to you)
You can also click Identify to verify that both displays are being identified correctly.
If No, then click on Detect (if its enabled) and see if the other monitor shows up.
Let me know if anything works. We can further investigate your issue.
Also, Are you saying that your graphics drivers get Uninstalled (or corrupted), everytime you reboot?
How about your other drivers, such as audio, peripherals?
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

New iMac not displaying Second monitor correctly... ATI graphic to blame?

I bought a new iMac a week ago, only to find out yesterday that new ones were released. My local Apple Store had no problems allowing me to swap my now outdated iMac for the new one that came out yesterday, and I am very grateful for that.
However, ATI's graphics are not getting along with my dual monitor setup. My display looks excellent on the iMac itself, but on the external 23" HD display from HP, it is all distorted and only shows 3/4 of the screen.
HP does not make drivers for OS X on their displays, since they are plug and play. Therefore, the issue is in ATI.
Anyone else having trouble with this?

Danny,
It's probably just the monitor preferences aren't set up correctly. Please follow these instructions:
1. System Preferences - Displays
2. Using the iMac's display preference click the Arrangement tab and you will see the orientation of the monitors. You will need to choose the left pane and move it around to get the orientation you want. When you choose it both box in the preference and the window on the monitor will get a red band around the outside to help you orient where you are. It takes a little trying but I'm sure you'll figure it out.
You didn't say what you have done to troubleshoot the issue so I'm assuming you haven't looked at the monitor preferences yet.
Regards,
Roger

Outlook 2010 loads but does not display on monitor

Very strange problem. When I click on Outlook 2010, the splash screen appears and it seems to load, but does not appear on my monitor. Task Managerr shows the application is running, so I guess it is there somewhere. All the other Office 2010 programs work
fine.
I am running Win 7 Professional 32bit, dual core 2.7 cpu, 4 gb ram. Everything else works fine. I was having a problem with Outlook 2003 crashing and had not tried Outlook 2010.
Have the same problem in Safe mode.
I did run scanpst.exe and it only found (and repaired) a few files that it felt were not important. I transferred my .pst file to my wife's computer and her copy of Outlook 2010 opened it fine. I used her computer to delete all items in the
"deleted" file. My total pst file is about 142mb. I have defragmented this hard disk. I don't have a Win7 installation disk because I downloaded the Office 2010 file and used a legitimate key to activate it
I think there is a simple answer. Appreciate your help in finding it.

I found my problem.
“Add-ons” were the source of the problem.
I believe there was a conflict between two programs:
Norton’s Security Suite and AnVir Security Suite.
Both were trying to scan my incoming e-mail.
I uninstalled AnVir, reset Outlook back to its original configuration (i.e. reversed all the changes I described above), and my problem is gone.
Not sure why this problem took so long to appear as both programs had been install for at least a month without issues.
I used AnVir and ZoneAlarm for over a year together without issues.
However, about one month ago, I uninstalled ZoneAlarm and installed Norton’s Security Suite.
In any event, uninstalling AnVir solved the problem.
Uninstalling Norton’s and keeping AnVir would probably work as well.

Late 2008 model - Not Displaying Second Monitor

My logic board broke recently and I took it to Apple to get it fixed. Once it got out of repair, I picked it up and brought it home. Plugged in the DVI cable and it did not turn on. Turns out the display is there. I can move windows over to the second monitor, but it's not actually showing anything.
I have a Samsung HDTV and a DVI cable. It's worked before, so I know it's compatible.
The reboot did not work. "Detect Display" did not work. Adjusted brightness. Haven't tried using the cable on someone else's monitor, nor have I tried to use another DVI cable. I still have to look into these things.
I'm figuring that somewhere there is something I have to restart, but Google and the forums have failed me.

Haven't tried using the cable on someone else's monitor, nor have I tried to use another DVI cable. I still have to look into these things.
You know what you need to do. Go ahead and do it.

Outlook does not display in the syncronize part Desktop software.

I'm running Windows 7, and Outlook 2003 (SP3).
I have a BB Tour.
I've installed Desktop version 5.0.1.28.
No problem with the instillation or any or feature. However w hen I go to the syncronization and click on the box in front of Calendar (or any of the choices), the only 2 choices I see are:
None
ASCII Impoter/Exporter
I've read every word of every manual, and can't find anything that will help me get Outlook onto that list. According to the Help section, Outlook is supported, yet it doesn't display.
Any suggestions on how to get Outlook onto the list

Read this detailed KB article.
KB02362 Unable to choose or missing Microsoft Outlook when configuring synchronization options in BlackBerry Desktop Software
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After updating to Mavericks, I can not display what is on the desktop to a projector. What adjustment do I need to make?

After updating from Lion to Mavericks, I am unable to see what is on my desktop through a projector connected to my Mackbook Pro. Where do I make a change to a setting that will accomodate the use of a projector?
Warren

Once again, Apple has decided they know the way you want to do this, and you will have to dig in the preferences to turn off these so-called "enhancements".
If you need an app window to span multiple displays [or work the way they used to work] deselect the option "Displays have separate Spaces" in the Mission Control pane of System Preferences.
OS X: Using multiple displays in Mavericks

Authorization/Activity not display in Chinese

Hi,
The symptom is：some of the authorizations are not displayed, both in English and Chinese environment.
As you can see DeleteFol, WriteFile, Delchild in this pic are not displayed. What the reason can be?
Regards,
Yemi

Hi Yemi,
This issue is already discussed in the below thread. Please have a look at this.
http://scn.sap.com/thread/1504498
Regards,
Ravi

Reader icons for PDF saved on Desktop are not displayed

Hello,
I have Windows 7 Ultimate 64 bit installed on my computer. Whereas Adobe Reader typical icons are correctly displayed in every PDF documents saved on my hard disk, they are not displayed on those saved on Desktop. A blank icon is displayed instead. I have tried to repair Adobe Reader from Control Panel and to uninstall it and remove its leftovers on the registry by using an uninstaller program but the problem still persists. If I create a New Folder on the Desktop and cut and paste the PDF documents saved on Desktop on such folder, they are displayed but if I then move them back to the Desktop the blank icons are again displayed. Any idea what can be the cause and how to fix the problem?
Many thanks,
Ennio

Hello,
There are so many posts in this forum concerning this question. Just make a search with the "ICON" keyword, then you will get hundreds of answers.
You can also look at the OTN forms page
http://www.oracle.com/technology/products/forms/techlisting9i.html
and particulary documentation about icons
http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
Francois

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

Try resetting the PRAM and SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

External monitor works only works when laptop screen displays

Hi there, I just connected a different (newer, but not brand new) external monitor to my T61. When I toggle screens (fn-f7) the external display gets no signal in the 'external display only' position, but displays beautifully in the 'both' position. This never happened with my old monitor. I would like to use the external display and not have the laptop screen display. Any ideas? Many thanks, Ellen

H
Try this:
After connecting external monitor, press win key+p and thrn choose projector only.
Have a nice day
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Source monitor and program monitor boxes will not display video in full only half

I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797

Lync 2013, text does not display in chat box. Windows 7 pc with dual monitors.

Has anyone experienced an issue with Lync 2013 where when someone sends a chat the text doesn't display in the chat box. Or on occasion when initiating a chat, the text typed in doesn't display? The person experiencing this
behavior has dual monitors and often times when she is working on a document - then goes to Lync and initiates a chat and types, the words do not display in the chat box. Her graphics drivers are current, (8.15.10.2869). At one point she was able to drag the
chat box over to the monitor on the left and then the text displayed. Since then she has received a brand new laptop, windows 7 and the Lync behavior continues but now her dragging the chat box to other monitor no longer resolve text display issue. Ideas?

Hi,
Did the issue happen if only use single monitor?
Please update to the latest version for Lync client 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

2207H Monitor Not Displaying

I downloaded the Windows 8.1 update and installed it. During the install though it restarted several times on its own and eventually when it came on the computer was running but there was no image on my screen. I ended up taking it to geek squad. They removed my graphics card (nvidia geforce 640gt) and then plugged in their monitor to my onboard graphics and you could see the display on the monitor. I took it home, plugged my monitor in the same way and it only ever says "No signal, monitor going to sleep". After messing with it, putting the graphics card back in, taking it back in, I still was not getting a display. I know the monitor is working though as I have plugged it into my laptop and it displays immediately without issue. I also know that the onbaord graphics for my pc are working because I went and bought the cheapest monitor Walmart had and plugged it in and it's working fine. I tested it with the nvidia card and it gave me the same no signal issue as the other, but on the onboard graphics it works.
How is it my hp monitor isn't working on my pc but is working on my laptop, especially since my pc is also working properly and displaying on another monitor? Any ideas?
Also, since getting the second monitor that will display I checked my drivers for updates, I ran the Maintenance, I scanned it with a malware remover and with norton, I updated all my apps in the store that had updates available, and I re-downloaded the Windows 8.1 update and it installed properly this time.
The pc is a pavillion p7-1410 (i3 intel core) and the monitor is a 2207h 22in flat screen.

Hello @melmiller,
I understand that your HP w2207h 22 inch LCD Monitor worked until you installed the Windows 8.1 update and now will not display on your HP Pavilion p7-1410 Desktop PC yet it displays on your laptop. I suspect that you are looking at a drivers issue. I am providing you with some things you can try below to fix this:
***Be sure to stop the steps as soon as you have the problem fixed!
1. Check the cables running from your computer to the monitor and make sure they are properly secured.
2. See if you can boot into Safe Mode. If you are unsure of how to do this you can use the HP Support document: Windows 8 Safe Mode.
***If you are able to get into Safe Mode uninstall and deleted the graphics drivers and go and download and install GeForce 340.52 Driver for your graphics card.
3. Rollback the Windows 8.1 update and ensure that your graphics drivers are updated before you run the Windows 8.1 update again.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have connected my laptop to a separate monitor but it is only bringing up the background, not the programs that are open. Help?

I have connected my laptop to a separate monitor but it is only bringing up the background image, not the programs that are open. Help? I assume there is a simple solution. Thank you in advance.

That's called extended desktop mode. You can think of it as an extension of your main screen probably off to the right. Drag an app off the screen to the right and it will appear on the second monitor. You can see and adjust placement of the second monitor in System Preferences > Displays > arrangement tab. Drag the second screen around for your optimum placement. Also the little bar can be moved to either screen and that determines which screen will contain the dock/menubar.
Also you can toggle between Mirror and extend desktop mode by pressing CMD F1.
Regards,
Captfred

ARD on my laptop not displaying both monitors on my desktop

Similar Messages

Maybe you are looking for