ARD to iMac connected via Airport express (idiots guide required)

Hello.
Im a new user to ARD and I would like to know in the most simplist of forms to connect to my iMac when I am away from home using my Powerbook.
Im not very informed on remote access so if someone could post an idiots gude step by step , and assume I know nothing, I would be very gratful indeed.
My set up.
Cable Modem connected to Airport Express
Computer: iMac
OS: Tiger 10.4.6
I have been able to connect to my iMac remotely when I connect an ethernet cable directly to my Cable Modem, however I have no idea what I am doing when connected to airport. I have no clue about port mappings etc etc, so any kind sole who can help woudl be a star for a week!
Thanks in advance.
Glenn

Hi, Andy,
If you've written up a good step-by-step guide, it'd probably be helpful to a lot of people, so you might want to submit it as a User-contributed tip. Contributions can be submitted here, or if you can't get into that forum (I think you have to be Level 2), you can submit through the Discussions Feedback forum. Save you responding to a lot of individual emails, and help out a lot of folks.
Regards.

Similar Messages

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Connecting via AirPort Express: Performance Help Needed.

Hello,
I'm grateful for ideas, instruction, pointers to threads I may have missed re: improving performance/determining the cause of poor performance when connecting via AirPort Express.
The deal: Up to 6 devices are connected to our AirPort Express. Only three of these are ever used simultaneously, though all remain "on," in either sleep or hybernate mode. Performance across the network is terribly uneven. Current data rate stats (a snapshot by way of the AirPort utility, in order of distance from the router):
iMac: 130 Mb/s
Printer: 54 Mb/s
Macbook Pro: 144 Mb/s
iPhone: currently "off"
PC (Connected via Belkin USB-type Wireless Adapter): 2 Mb/s
iPad: 39 Mb/s
Note: the Macbook Pro is often located in a room farthest from the hub, some 120 feet away and with partial direct line of site. Still, its performance is unimpeded.
At first glance, logic would dictate the worst problem is on the PC and caused by the Belkin adapter. But I've swaped that out for different USB solutions. Performace is seldom improved.
Wondering if:
a) The PC problem is in the data transfer rate of the PC bus. (Foregive me if I'm using "bus" incorrectly here. I'm guessing you'll know what I mean.) Or is it the nature of the USB adapters?
b) Please also note that the Printer, which sits close to the router, often has a drop in data rate, sometimes to the single digits.
Again, I'm grateful for ideas, instruction, or pointers. Also for wisdom on "extending" the network, perhaps by adding another AirPort device. I'm rather clueless about such stuff.
Thanks in advance- Best for the weekend-

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
The connection drops after a little while. Everything says its working but obviously it's not.
ANY HELP??!!!
Thx!

reinis wrote:
I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
Any solutions?
According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
If the value for noise is high, you might try setting your AirPort unit to a different channel.
All the above is based on your having no other Wi-Fi equipment.

Can't find certain servers connecting via Airport Express

For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

Gerard Van Schip wrote:
I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
You don't describe what happens when you try to print.
Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

I find there is a slight delay between my macbook speakers and external speakers connected via Airport Express. Is there a way to rectify this? Thanks!

Music plays out of sync between my computer speakers and externally connected throught Airport Express speakers.

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Very slow printing from Konica connected via Airport Express

Hello folks,
I have a very strange problem with erratic printing to a network printer, connected to an Airport Express via ethernet.
The Network:
- Draytek modem/router hosting DHCP
- Time Capsule connected to Draytek. It's in bridge mode, and runs the WiFi network
- Airport Express 1 in "Join a Network" mode, ethernet clients allowed
- Konica Minolta Magicolor laserjet printer connected via ethernet to AX1
- Airport Express 2 in "Extend a Network" mode elsewhere in the office
All client devices on the network are getting IP addresses in the correct range etc. I have fixed the IP of most devices at the router level, so they don't change.
Client Macs print directly to the printer using IPP (or might be LPD, I can check if relevant) using apparently a correct driver and IP address.
WiFi network is very strong throughout, and the distance between Time Capsule and AX1 is just a few feet.
Here's the problem:
At the start of the day, the printer works just fine. Fast.
Then, inexplicably, you send a document to it and the print queue reports "Spooling....xx%" which increases painfully slowly compared to when it's working normally.
This happens randomly with both small and large files. A modest photo can take over an hour to fully spool and print when it's doing this.
Turning the printer off and on again tends to make it work properly, until the above happens again.
This is driving me mad. Is there a problem with:
(a) The WiFi network or airport hardware
(b) The printer
(c) The drivers
(d) The printing protocol
(e) Me
(f) All of the above
Any insight would be most welcome. The Konica tech reckons it's working, but I think he didn't spend long enough sending print jobs to it for the problem to manifest.
P.S.
One of my main questions is, when the print queue says "spooling", is this the process of progressively sending the file over the network? Or does spooling occur when the data is either already fully arrived at the printer, or hasn't left the Mac yet?
Could the printer's unwillingness to accept data cause the slow spooling? Why might this happen?

It should work. Enable Printer Sharing via System Preferences -> Sharing. The Mac does need to be turned on.
P.S. Try to just post one thread on your question instead of crossposting over several forums.

Connect to Win (wired) network from MacBook connecting via AirPort Express

Hi,
I have a MacBook (OS 10.4.10) that I was connecting to my Windows network via a Linksys WRK54G Wireless router (configured as a WAP), which in turn was connected to a Netgear FVS318 VPN Firewall Router. The FVS318 connects to my cable modem and 2 Windows XP Pro PCs. The Linksys WRK54G has been flaking out, so I replaced it with an Airport Express. My MacBook and a Windows XP Pro laptop are both able to connect to the internet via the airport express, and they are both able to ping the IP addresses of my (wired network connected) Win XP Pro PCs. However, the PCs no longer show up under "Network" on the MacBook, nor can I connect to the shared directories on the (wired) Windows PCs from the Win XP Pro laptop (via Start Menu => Run => enter IP address). I have not found any answers so far either using Google or Apple Support website. Surely this is possible -- what am I missing? Thanks.
- Scott

Hello sborisch. Welcome to the Apple Discussions!
If I understand your network configuration, you just need to configure the AirPort Express Base Station (AX) as a bridge...
To set up the AirPort Express Base Station (AX) as a bridge, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

Intermittent internet connection via airport express

I've got a MacBook Core Duo and a MacBook Pro Core 2 Duo...both with airport express. My internet connection is via a DLink DI-624 to Motorola cable modem. The DI-624 is setup with WPA security...which has been working fine for my windows laptop and PDA.
I've been getting random problems with web surfing even though the airport express icon shows full bars. During those problem times, safari reports no internet connection.
I've noticed that I can sometimes bring internet connection back by turning off the airport (via the icon at the top) and then turning it back on. Don't like this, as wireless connection should just work...and this doesn't always fix it.
Suggestions?
Thank you.
MacBook Core Duo and MacBook Core 2 Duo Mac OS X (10.4.8)

raxx wrote:
I am currently using the 802.11n Airport Express (firmware 7.4.2) as a wireless router to serve 2 802.11g Windows PCs. However, our internet connection seems to have slowed significantly recently.
When I connect directly via a LAN cable, my download speed is 25+ mbps. However, the download speed slows to only 6-7 mbps when connected wirelessly via the Airport Express. The speed remains this slow even when only one computer is connected wirelessly.
In general an Ethernet connection will be faster than a Wi-Fi connection.
In AirPort Utility for Mac (which ought to be similar for the same program for Windows) you can enter "manual setup" mode, then select the "Advanced" panel, click the "Logs and Statistics" button, then click the "Wireless Clients" tab. If you can do that, what values do you see in the lower part of the window for "SIgnal" and "Noise"?

PBG4 tries to connect via airport express, but I want it to use ethernet!

Hey y'all, and thanks in advance for your help!
I use airport express to connect itunes to my stereo, and for nothing else. My computer, however, keeps trying to connect to the internet through the airport express, and I end up having to turn the airport off until I'm on a website, then turn airport back on.
How do I tell my computer to NEVER attempt to connect to the internet via airport, and to ONLY use ethernet to connect???
Thanks again!

Click here and follow the instructions.
(41434)

Imac connects to Airport Express but iOS devices don't

I just bought the newest Airport express to replace my old airport express router. I've set it up using the Airport Utility to match the settings of the old router. The iMac has no issues connecting to it wirelessly, but the iOS devices in the house and the wireless printer all are able to discover it, but not connect (ie. the buffering icon just spins and spins).
I've reset the iOS devices after removing the old network name, but this seems to have no effect either.
Help?

Turns out that I had the network cable plugged into the right network plug rather than the left network plug on the Airport Express. That simple change and we are up and running!

Connecting via Airport express: really annoying problem

I've got a really annoying problem that doesn't make much sense. Have an airport express and my network seems to work OK mostly. My iBook can always connect, never any problem. My eMac however is behaving bizzarely. The longer I'm connected, the worse my connection gets. Until it stops working altogether and I can't access the internet at all. System preferences tells me the Airport card is on, but is not connected to a network. Can still connect to it with the iBook.
Shut down, leave it a good while (a good while too, a short shut down doesn't do it), and it works again.
I can't even think where to start looking, all I can think of is that I have a problem with the Airport card in the eMac (something getting hot in there perhaps). Any ideas?

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

MacBooks connecting via Airport Express cards

Good morning. A colleague of mine thinks it's possible to get machines with AirPort Extreme cards to communicate without the use of a Base Station. Is this possible please?
Brian Bowell.

On one of the MacBooks go to the AirPort menu and create an adhoc wireless network. The others would join that network.

Connecting Macs to PC running Ubuntu via Airport Express

I've been puzzling over this one for a while, and have tried various combinations of configurations through Airport Admin Utility, but still can't get this to work.
We have 2 apple computers, an iMac Dual Core and a Powerbook G4 both running OS 10.4.8, and an old Dell which is running Ubuntu 6.06.
The Macs connect to the internet via a usb modem connected to the Powerbook G4, the iMac connecting via Airport.
I would like to be able to connect the old Dell PC running Ubuntu to this internet connection, and ultimately the 2 Macs, via the ethernet port on an Airport Express box.
Can this be done?

Yes.
The Ubuntu would act as a gateway or router.
The Airport Express should be configured to not distribute IP addresses.
To be honest an easier solution would be to get a wireless router with ethernet ports instead.
Are you using ADSL.
Check out the following website.
Reviews of equipment
http://www.adslguide.org.uk/reviews/
I would recommend replacing your USB modem with an ethernet ADSL Modem Router
As most ADSL Modem Routers are setup through a web browser you should be fine with a Mac.
I would also check out ADSL Nation's X-Modem M3 http://www.adslnation.com/products/xmodem-m3.php It is also now available from the UK Apple store and retail stores.
http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=TJ151
which can also be used in conjunction with an AEBS or AX.

ARD to iMac connected via Airport express (idiots guide required)

Similar Messages

Maybe you are looking for