ARD window with Starry sky and lock

Hi,
I am having a problem with ARD 3.3.2. From my Mac Pro I can control my MacBook Pro. From my MacBook Pro I cannot gain access to My Mac Pro's screen. Sharing settings are the same for both.
On the MacBook Pro in the ARD window I click on the Control button and I get a window with the Snow Leopard starry sky and no other objects in the screen EXCEPT a lock displayed in the middle of the screen for the 5 seconds after starry sky screen 1st displays. The only other objects are the 3 buttons in the left of the title bar.
If it matters, I get the exact same symptom with BTMM.
Anybody have any ideas one how to get rid of the lock and have the contents of my Mac Pro display on my MacBook Pro using ARD?
Thanks
Craig Dudley

Well, I deleted my Mac Pro from the Remote Desktop on the MacBook Pro system and then re-added it and everything works fine. Should have tried this 1st before posting.

Similar Messages

Problem with remote desktop and lock screen

I know of the easy way to immediately lock a Mac's screen by clicking the menu bar lock icon from KeychainAccess. This works on every system under my control (rMBP running Mavericks, MacMini with 10.5 and Mavericks). However when I control the Macs via Remote Desktop (currently 3.7.2), that lock icon behaviour changes.
Trying to lock a 10.5 system, the screen inside the Remote Desktop window goes black immediately. Moving the mouse activates the password dialog. That is what I want. Doing the same in a remote Mavericks system, the screen goes to a dark blackish semi-transparent state. Moving the mouse immediately restores the normal desktop view, no password asked. Is this a feature or a bug in Remote Desktop? This change in behaviour must have come in around Lion or Mountain Lion.
---markus---

Hi
Do you use the Intel Proset Utility to configurate the WLan connection?
Try to configure the WLan using this tool and check if the Wlan would disconnect again.
Im also interesting what Wlan driver did you use?
Did you use one from the Intel page?
If not, check the Intel page for the newest WLan driver version.

Boot-camp/Windows with cordless mouse and keyboard

I am picking up my 27" quad core iMac tomorrow. In anticipation I bought the Pogue book on Snow Leopard. In it he says that you can't install Windows with the cordless mouse and keyboard but that once installed it can be used with the cordless mouse/keyboard. Will someone please tell me he is wrong .
Thanks.
Alan

I used mine to install Windows. Worked just fine till the Apple Bluetooth drivers were installed, then I just had to connect a regular USB keyboard/mouse to pair the bluetooth keyboard and mouse again.
One suggestion, after you install the Boot Camp drivers and plug in your USB keyboard/mouse, uninstall the "Apple Bluetooth" drivers (I believe there are two of them) and restart your computer. Let Windows automatically install generic drivers for the built in bluetooth, THEN pair your wireless keyboard and mouse. After that you can reinstall the Apple bluetooth drivers if you want, although I don't think it's particularly necessary. The generic drivers seem to work fine in my experience.
You may run into trouble pairing your keyboard and mouse, if so, refer to the "Boot Camp" section on this site, there are millions of threads about it there.

Black window with white border and cursor location - how do I get rid of it?

I must have inadvertently hit some key or combo of keys and now I have an oblong black window with white border that is annoyingly telling me what the cursor is over and where I can go/ what I can do from there.
How did I manage to turn this on and more important, how can I turn it off?
Thanks.

oops, never mind, found it - VoiceOver .... solved

How to make an AIDrawArtAGMPort on Windows with CS3, CS4 and CS5

Hi
I want to use the function DrawArt of AIDrawArtSuite.
To use this function, I must have an AIDrawArtGWorld or an AIDrawArtAGMPort or an AIDrawArtAGMPoirtV6 object.
With CS6 SDK, this suite provides a mean to instantiate an AIAGMPort.
With CS3, CS4 and CS5 this function doesn't exist.
On MacOS X, I can build AIDrawArtGWorld.
On Windows, I don't know how to do it.
On Windows how can I make an AIDrawArtAGMPort object ?

Hi,
It is not recommended way to install SAP System without following Standard Installation Method. Please read concerned Official SAP Installation Guide and follow the standard procedure without inviting more complexities and headache.
Regards,
Bhavik G. Shroff

XSomeone played with my ipod and locked it up and I can not enter pass code for 40 years how can I fix

Someone played with my ipod trying to guess my pass word and locked it up for 21,684,750 minutes how can I fix this so that I can enter my pass code in

Hi,
You will have to place your iPod in Recovery Mode and restore it via iTunes: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

How to create popup window with radio buttons and a input field

Hi Guys,
Can somebody give some directions to create a stand alone program to create a window popup with 2 radio button and an input field for getting text value. I need to update the text value in a custom table.
I will call this stand alone program from an user exit.
Please give me the guidance how go about it or please give any tutorial you have.
Thanks,
Mini

Hi,
There are multiple aspects of your requirements. So let's take them one at a time.
You can achieve it in the report program or you can use a combination of the both along.
You can create a standalone report program using the ABAP Editor (SE38). In the report program you can call the SAP Module pool program by CALL Screen <screen number>. And then in the module pool program you an create a subscreen and can handle the window popup with 2 radio button and an input field for getting the text.
For help - Module Pool programs you can search in ABAP Editor with DEMODYNPRO* and you will ge the entire demo code for all dialog related code.
For Report and other Module pool help you can have a look at the following:
http://help.sap.com/saphelp_nw70/helpdata/en/47/a1ff9b8d0c0986e10000000a42189c/frameset.htm
Hope this helps. Let me know if you need any more details.
Thanks,
Samantak.

I have CS6 in a disk and I can't install it,I get a window with my name and asking for a pass word,the window reads like this:set up wants to make changes type PW to allow this.I type my adobe PW and it doesn't work.I am stake in that step.

What can I do?I can't install CS6 in a disk.I get a window reading:set up wants to make changes type PW to allow this.
Type my Adobe PW and is not that.This is frustrating!!!!Downloading, Installing, Setting Up

Hello ozne,
as a first step please have a look at these "General infos about the Adobe Account"
https://www.adobe.com/account.html and http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
Did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Good luck!
Hans-Günter

Creating Link to New Window with Defined Size and Cursor Change

Hello,
I seem to be having a problem having a hot-spot link open a new window and perform the way I want it to. I have tried a few different ways of going about this, as described below:
The first method when defining the hot spot was to use the properties menu provided at the bottom of Dreamweaver when I click on the hot spot. When I test the page, the cursor changes to a hand and I can open the link in a new window BUT I cannot define the width and height of the new window.
The second method was after defining the hot spot, using the behaviors menu from the tag inspector. From here, I would add an Open Browser Window behavior using the onClick event. Here, I can open the new window in a pre-defined width and height BUT when I test the page, the cursor does not change to a hand. It just remains the standard arrow.
The question is, how I can define the hot spot to where the mouse will change to a hand when I scroll over it AND when the window opens, it is set to the width and height I want to define?
Thanks,
Smartin1007

Good Morning Gentlemen,
I tried placing the cursor script into the code without success. Either I'm not applying it correctly or it could be that the code in use is a combination of html and Java scripting.
Right now, I converted all of the image maps to the behaviors technique because I need the specific window sizes for the application that is being created. Steve, I am using DW CS4, and a sample of the code is provided below:
map name="Map"
area shape="rect" coords="19,466,56,503" alt="Stage Hydrograph - North Fork Licking River at Mt. Olivet, KY" onClick="MM_openBrWindow('StageHydrograph/MtOlivet.html','','width=915,height=665')"
/map
Note that there is no href reference, because I haven't found a suitable way of having an href reference with target=_blank to where I can define the new window size.
I really appreciate the advice and time that is being taken to help solve this problem.

Trying to scroll emails is not possible despite trying advised solution 'about:config' & I get a window with a mike and clef symbol.

I am still unable to scroll with the mouse -touchpad works ok- despite updating mouse software & applying solution in 'about:config'. When attempting to scroll, i get a window which displays a mike with a clef note superimposed.

loqs wrote:You built the package (using --asroot with makepkg is not a good idea ) but you did missed Install_the_package
Also see Kernel_Modules so the module is loaded automatically at boot.
Seriously? I spent that many hours searching for my several error messages, trying to solve them, not wanting to ask for help without putting too much of my own effort into it and when I finally decide to ask for help it is when I didn't get a super essential thing like makepkg doesn't install and is merely to create .pkg.tar.xz?? Oh gosh... (;
Well, thank you! I guess I'll take my next change to use Google to find out how to use makepkg without --asroot. Yes, wl is loaded now and it's set as the kernel driver in use!
Unfortunately, after ip link set wlp2s0 up and typing dmesg | grep wl I get:
wl: module license 'Mixed/Proprietary' taints kernel.
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
systemd-udevd[148]: renamed network interface wlan0 to wlp2s0
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
And therefor: No firmware loaded. Google doesn't give much about this message but hints to PCI or PCI-Express not working as it should. I found this and tried starting with pciehp.pciehp_force=1 and ordered a modprobe acpiphp but nothing changed.

Reader opens a new window with same file and crashes when trying to print

the wierd thing is that I have two Dell systems printing to the same HP 4015 printer, though when the other one prints there is no problem, and when printing to another printer the same error occurs, any other documents are fine. we've tried the drivers but since the error happens with other printers I don't think its a issue with the drivers or the printers. I did a quick search and found similar issue, though none with any results, if I've posted in the wrong area please point me in the right direction. any assistance would be greatly appricated.
thanks.

if it will be of assistance to any one, the resolution to the issue came when the profile was deleted and then recreated. we came to this conculsion when we created a new user proifile and tried to re create the issue. while not technically a direct fix the issue was resolved. its a hell of a lot better than some of the other resolutions online.

Performed software update and now I can't get past a window with Itunes logo and usb picture?

When I powered up the Ipad this morning, there was a software update notification. After completing the update, the Ipad won't boot past a screen that has the Itunes logo and a USB cord just below it. I've powered off and it still wont get past this screen.

Thanks for the suggestion but unfortunately, it did not work. Restore was unsuccessful and now I can't get iTunes to stay open long enough to attempt a second restore. I've just posted a new question with more details of what I've tried.

My firefox doesn't upload pdf files. It only opens a window with the link and a white or black page...

Installed firefox a few days ago.
Have Adobe Acrobat program.

Check your downloads ("Ctrl+J").
A PDF will be downloaded whether you choose to view in Firefox or choose to view outside of Firefox for more control. A tab would be created with no content if you had it open in a new tab and is not read in Firefox.
The following may be of interest to you but it is geared to use of the (Free) Adobe Reader.
:http://kb.mozillazine.org/Adobe_Reader

Trouble with the home and lock button

I was on google translate on my ipod touch and then when I clicked the home button to go to the homepage, it didn't work. Then I tried the lock button but it didn't work either and when I pressed it down for a long time it doesn't turn off like it usually does. I tried clicking both of them simultaneously for about a sec and I was able to take a screenshot. Also, I can still use google translate but if I try to go to YouTube from one of the buttons there, it doesn't work. Can someone please give me some help? I really can't afford to buy a new ipod touch nor can I pay for it to be fixed at the stores.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Calling a new browser window with WD Abap and passing data via POST

Hi there,
does anybody know whether passing data via POST method is possible when opening a new browser window from within a Web Dynpro Component? In my case I use method IF_WD_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW for opening a new browser window. Now I want to pass a big amount of data which is only possible via POST method. How can I achieve that or is it not considered inside the Web Dynpro Framework?
Kind regards,
Albert

Hi Priya,
can you please explain a little bit more what you mean? I didn't get it..
Kind regards,
Albert

ARD window with Starry sky and lock

Similar Messages

Maybe you are looking for