ARE-1 creation for Exports in INR

Dear Sirs,
IS it feasible to create ARE-1 for exports done in iNR current (like in Bhutan, Nepal etc)?
I have created an excise invoice but not able to select "Export Under Bond". It is "Local" only.
Can you please sugest me what is the configuration setting for making selection "Export Under Bond"?
Regards,
Rajni

Hi Rajni,
Plz do the following setting.
SPRO > LG> Tax on GM --> India --> Business Transactions --> Outgoing Excise --> Maintain Defualt Excise Group & Series Group.
Here you enter the Sales Area,Shipping Point,Plant,Excise Grp,Series Group & Export.Here in Export select B EXPORT UNDER BOND.
And again create Excise Invoice,click on UTILIZATIOn it show you the option for EXPORTS.
Thanks & Regards,
Hemant Patil

Similar Messages

What are the settings for exporting the best possible quality movies?

I'm trying to export movies using imove 11, there are a ton of export setting, im wondering which are the best for exporting top quality movies? assuming file size doesnt matter.

ok so heres what the movie inspector says:
Format: Photo- JPEG, 1024 x 576, Million Linear PCM, 24 bit little-endian signed integer, 2channels, 44100 Hz
FPS: 17.80
Data Rate:9.63 mbit/s
Current Size:1024 x 576 pixels (actual)
So do i want to somehow duplicate these settings?
The other thing I was thinking about was opening the file in Quicktime and using the "trim" feature to edit it down that way, although its not as neat. Would this preserve the quality? And would it get rid of the excess footage (which is what I want)? Or would it like keep that footage attached to the file somehow?
Thanks

Exchange rate diff. accts are not defined for account 16145110currency INR

Dear SAP Gurrus,
I am facing a problem while making payment against invoice, receiving payment against invoice, clearing advance payment and advance receipts through T-code F-53, F-28, F-44 and F-32. System is allowing me to select the invoices against which I want to do the clearing but when I go for simulation I am getting the following error -
' Exchange rate diff. accts are not defined for account 16145110currency INR'.
When I click on the error message the performance assistant gives methe following details:
Exchange rate diff.accts are not defined for account 16145110 currency INR
Message no. F5062
Diagnosis
The accounts for posting the exchange rate differences could not be determined. For the specified G/L account and the specified currency key, no corresponding exchange rate difference accounts were determined.
System Response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete the default settings for exchange rate differences and post the document afterwards.
Proceed
My client is local. Even the local currency is set to 'INR'. There is no foreign currency involced while making invoices, payment and receitps. Eventhough the system is giving me error. As a result I am not able to clear open items. Please give me some feasible solution so that I can clear the open items.
Thanks in advance
Regards
Shreyas Wani

hi,
As you said, you are not maintaining any Exchange rate differences, It may not be required a Exch rate Diffrences account.
Please check whether you have created any Group / Parrallel curencies etc in co.code level.
Please go through the notes 209580 / 89531, hope it helps you.
Regards
Kanna

ARE-1 Creation for Depot Location

Hi All,
We have a requirement to create an ARE-1 Export declaration form for Exports made from Depot location.
Currently we are only exporting from manufcturing location but business wants to export from Depot Location as well.
What configuration settings is required to make an ARE-1 for Depot and since ARE-1 is created with reference from EXcise Invoice which in case of Depot is created before customer Billing. So how will this work.
Please suggest.
Regards,
Sumit

Hi Lakshmipathi,
I asked the same question during initial discussion but as per them it is allowed to export from Depot Location. When I checked in SAP I didnt found the required settings to create an ARE-1 from a Depot Excise Inv instead of Factory Excise Inv.
Let me know if you have any solutions for the above requirement.
Regards,
Sumit

What are the 'gotcha' for exporting using Data Pump(10205) from HPUX to Win

Hello,
I have to export a schema using data pump from 10205 on HPUX 64bit to Windows 64bit same 10205 version database. What are the 'gotcha' can I expect from doing this? I mean export data pump is cross platform so this sounds straight forward. But are there issues I might face from export data pump on HPUX platform and then import data dump on to Windows 2008 platform same database version 10205? Thank you in advance.

On the HPUX database, run this statement and look for the value for NLS_CHARACTERSET
SQL> select * from NLS_DATABASE_PARAMETERS;http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_4218.htm#sthref2018
When creating the database on Windows, you have two options - manually create the database or use DBCA. If you plan to create the database manually, specify the database characterset in the CREATE DATABASE statement - http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_5004.htm#SQLRF01204
If using DBCA, see http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#ADMQS0021 (especially http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#BABJBDIF)
HTH
Srini

What are the settings for exporting a video to a DVD?

can someone please help

I assume you understand that the file exported from Premiere must be authored onto a DVD. Just pick the MPEG2-DVD format and pick a preset that fits your material. And H.264 Bluray or MPEG2-Bluray for Bluray.
If you don't understand authoring, you need a program like Encore:
This is the link for info re using Encore CS6 with CC, updated for CC 2014 and the cloud desktop install.
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
It has links for getting the library (which is not installed with Encore) and a workflow with CC versions.
In the cloud desktop, assuming you have PR CC 2014 installed, you are looking for this:

ARE1 creation error - "excise Invoice is not meant for Exports"

Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
Kapil

Dear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi

Excise Invoice List-Pending for ARE document creation

Dear All,
Is there any standard Tcode for getting the list of excise invoice which are pending for ARE documents creation or with the status of ARE documents.
Thanks & Regards,
Antima

Hi,
No there is no standard report available for this requirement. You may need to develop a Z report.
J1ARE_AGE gives u the status after creation of ARE1.
Thanks
Krishna.

Creation of RG1 for Export Sales

Hi,
Frends,
For Export Sales Customer wants to create RG1, but i dont know how to create that can u pl send me some tips of creation of RG1.
Thanks and Regards
Babu Rao

Hi Babu Rao,
RG1 register is a register of Daily stock account. Whatever stcock you produce n move to warehouse specifically for excisable finished goods, RG1 captures all these movements of material to your warehouse/store. And thr is standard program given in by SAP to create RG1. Mostly, u dont need to create a Z report for that.
Rg1 consists of fields like
for matl XXX -
closing bal(quantity till last day);
quantity mfged today;
total quantity;
excise duty payable on them etc
By T code J1iex u will be able to create the RG1 or some other registers. then update the entries in the registers(then registers will show new data)
update registers- j1i5
extract data- j2i5
print register- j216
in this sequence only. because this is the procedure for maintaining any register. In each code, u will find selection criteria, n need to choose register that u intend to maintain.
If u need to create RG1 specifically for exports' use tables :
vbrp, vbrk, konv, kna1
j_1iexchdr (excise header), j_1iexdtl(excise item), j_1imtchid(for matl chapter id)
from j_1iexdtl(excise item), u can find tables of excise values.
from vbrp, fetch the document no., matl number
hope this will help you.
Reward, if it helps.
Prashant

Show only those key words in the slide show that are marked for export

Hi,
I just learned that I can hide some keywords for export. I find it useful to look at the keywords at the bottom of the hierarchy in the slideshow. I found a way to display all keywords in a text field in the slide show, but I did not find a way to show exactly those keywords that would be exported when the pictures were exported.
Is there a way to achive this?
Thank you ver much!

It will only show explicit keywords (i.e. the keyword that you actually assigned to the image), so I'm not sure how you managed to get it to show all keywords (i.e. explicit and implied) that can be exported.
Explicit/Implied?
[PLACES]>USA>Wyoming>Yellowstone>Mammoth Hot Springs
In above example PLACES is set to not export. Yellowstone is the assigned or explicit keyword and USA+Wyoming are implied. The explicit and implied keywords will export. Mammoth Hot Springs will not be assigned to the image and therefore cannot exported.

Exchange rate diff.accts are not defined for account 13100100 currency INR

We are facing issues with doing BRS and getting the following message,
Exchange rate diff.accts are not defined for account 13100100 currency INR
We have tried all possible steps mentioned on SCN,please note the acoount mentioned above does not have the open item management.
Assigned GL accounts on transaction DSA-Difference arising on G/L acct clearing.

Hi ,
THis question has been Asked and answered lot of time .
Can you Please go to OB09 and define your GL account to solve this problem
Many Thanks

Exchange rate diff.accts are not defined for account 16138579 currency INR

The following message is coming,while trying to clear vendor account of capital services.Exchange rate diff.accts are not defined for account 16138579 currency INR
Please help us to resolve the issue.

Hello Kishore,
Use TCode: OB09 and maintain FX determination account for G/L account 16138579. In case you have local currency 2 then you will also need to maintain FX determination see below example:
Additional setting in case you have local currency 2

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

When i queue a file for export the encoder is changing my settings to ACC Audio & my settings are not in the drop down

when i queue a file for export the encoder is changing my settings to ACC Audio & my settings are not in the drop down. Help

There's something else going on. When you search, the search box searches the Spotlight database that it created when indexing. It doesn't search the computer again. I suspect a hosed index. System Preferences->Spotlight->Privacy->delete all volumes and readd them back in. That should reindex the computer and all attached HDs. BTW, by default there are many places Spotlight doesn't return information from, mainly the various Library folders and the System folder. If you want to find everything, do this:
Click on the Desktop, CMD+F, click on Kind button, select Other, drill down to File invisible, check it, continue down to System files, check it, and click OK. Now, click on + button, click on the left-hand item and select System files and select are included, click on the plus button, click on the left-hand item and select File visibility and select visible or invisible, select File Name, save the search, drag its icon to the Dock, and use to search your entire Mac—currently starts with By Name, but Contents is available. I use this instead of CMD+F or CMD+spacebar for all searches.

Extension SDK : Where are the wizards for extension creation in JDev

I remember seeing there were few wizards in JDev 10.1.3 Preview version for creating extensions which generates the stubs (like create extension with windows etc.), but I don't see it in the new extension SDK. It only contains extension.xml file with basic properties, also it doesn't XML give insight in the extensions.xml.
Why are the wizards missing? Are they left by mistake oir by intension?
I hope having wizards for extension creation (like eclispe) will help people creating extensions. Currently we have to copy paste some extensions provided by Extension SDK and merge our code as and where required.

Hi,
The Extension Manifest gallery item that's in 10.1.3 production's Extension SDK at least provides a starting point. It will generate extension.xml automatically based on values entered in the creation dialog.
There were a couple of other extension design time features in 10.1.3 preview that were pulled prior to production. This was mainly due to scheduling constraints (a number of other features had higher priority), changes to the extension SDK API between preview and production, and several bugs and design issues with the functionality.
As I mentioned, extension design time support will be expanded in future releases, and is now a priority for us. These improvements are currently targeted for the 11.0 release, but it's not inconceivable that the ESDK for 10.1.3 could be updated with these improvements too if there's enough demand.
Thanks,
Brian

ARE-1 creation for Exports in INR

Similar Messages

Maybe you are looking for