Are 2009/2011 iMac power supply compatible with mid2010 iMac?

I have a mid-2010 that doesn't turn on. None of the LEDs turn on and I've been troubleshooting for a couple weeks with no luck. I want to buy a power supply for the iMac but I'm not sure if others are compatible. I can't find one specifically for the 2010 one.
Information:
Mid-2010 21.5" iMac
EMC 2389
About 2.5-3 years old
It doesn't turn on
None of the diagnostic LEDs are lit
Makes a small zzz noise every couple seconds when plugged in
Suspected power supply failure

Switching won't harm your machine.

Similar Messages

  • HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

    I have a macbook air (mid 2012) and a thunderbolt display (27''). 
    Do I absolutely need to connect the power supply together with the thunderbolt cable ?
    I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • Is Microsoft Office for Mac 2011 [Word, Excel, Powerpoint] compatible with Yosemite?

    Is Microsoft Office for Mac 2011 [Word, Excel, Powerpoint] compatible with Yosemite?

    I'm using Excel, Word and Outlook for Mac 2011 in Yosemite without any issues.  I can't speak for Powerpoint, as I've never opened it.  I'm not a power user in Office, so I doubt I've really exercised it.  But so far, Word editing and some simple Excel spreadsheets I use for inventory tracking have worked with no problem.

  • Will this power supply work with my PC?

    Will this power supply work with my PC?  I have a Compaq Presario SR5816F
    http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...   
    http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
    This question was solved.
    View Solution.

    JCGood1984, welcome to the forum.
    The computer should take a standard ATX power supply unit (PSU).  I suggest measuring the existing PSU and compare the measurements to the one in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Is the USB Power Adapter compatible with iPod touch 3rd Generation?

    Is the USB Power Adapter compatible with iPod touch 3rd generation?
    (http://store.apple.com/us/product/MB352LL/B?fnode=MTY1NDA4NA&mco=MTM3NDk1MjI)
    The specs of the Adapter ("This accessory is compatible with the following:" in the "Overview" section) don't mention iPod touch 3rd generation. They do mention 1st and 2nd Generation
    Thanks!

    Thank you, Lyssa.
    You must be right based on that article (http://support.apple.com/kb/HT1353). The latest model of iPod touch is referred to as "iPod touch (Late 2009)" -- and NOT "iPod touch 3rd generation", as I erroneously assumed.
    That completely answers my question about the USB power adapter.

  • Are animated ellipses in OAM files compatible with DPS?

    I tried creating a basic animation with an ellipses flying into the stage. but for some reason the ellipses isn't displaying on Adobe Content Viewer.
    I've done the same thing with a rectangle, and the animation works fine.  Are animated ellipses in OAM files compatible with DPS?

    Ellipses animations on the Desktop Adobe Content Viewer are coming out as squares. Preview looks fine on the device.

  • IMacs G3 power supply compatiblity question

    I have an original Bondi blue iMac G3. Power supply works OK.
    I have a flower power iMac G3 but the power supply is defunct.
    Can I swop the Bondi 's iMac power supply to the flower power iMac?
    Thanks.

    Unfortunately the answer is no. I just checked Mactracker & the Bondi Blue iMac uses a 80 watt power supply. The Flower Power iMac uses a 150 watt power supply. So if you tried to use the Bondi Blue iMac's power supply it probably wouldn't provide enough wattage for the iMac to work properly. I would recommend looking on eBay for a replacement power supply. Some vendors might have one or more in stock.

  • Anyone having Power Supply Failures with 4305's

    For some reason over the last 6-8 weeks I am getting multiple power failures on my 4305DMPs, replacing the power supply/wall plug brings everything right back but I'm wondering if there is a bigger problem.
    All DMP's are connected to APC power bars with Surge Protection, and the LCD Screen continues to work fine. The DMP will just quickly flicker both Red and Green Lights, and remain unresponsive. We have tried cleaning teh contacts on the power supply but have had no luck.
    I have had to swap 10-12 of them now, these have been working with no issues in the field for over 3 years.
    I guess I am just wondering if anyone else has had this problem, a search on here didn't reveal anything.
    Thanks,
    Jh

    I haven't heard anything about this on the 4305, but just pointing out that this is a 2-year old post.
    We're using some Linksys POE -> 5V splitters and they've been humming away for years. I listen to feedback about reliability, but it would be helpful if a specific part # / manufacturer on the brick were identified along with any complaints about it.
    As far as replacements, be sure to use the right specifications, other DMPs operate off of 12VDC but the 4305 uses a 5-volt adapter.
    Input voltage: 5V
    Input current: 3 ADC
    Power consumption: Peak: 12W; average: 5W

  • Will a HP-OW120F13 Power supply work with a DV7T-7000? It is from a DV8T-1100

    I just purchased a DV7T-7000 to replace my old DV8T-1100. I had purchased an extra power supply for when I travel. The power supply is a HP-OW120F13 Replacement spare part # 463953-001. The output on it is 18.5V 120W. The power supply that came with the DV7T-7000 has a output of 19.5V 6.15A.
    Can I use this power supply with the DV7T-7000? The plug to the laptop is the same.

    Hi @dfuerstenau ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Will This Creative Power Supply Work With The Apple iPod Ser

    I am going on a trip and i am incharge of mp3 players and charging unfortunately i am the only one who has a Zen and every one else has an iPod so.... will this Creative Power Adaptor Work with all/some iPods Thx wbnghiMessage Edited by wbnghi on 06--200709:36 AM

    I've never used an iPod, but don't they charge through their docks?
    I doubt if it would work- very few Mac products are designed to be compatible with PC devices.

  • Will a 65w power supply work with the HP Envy 15t (which comes with a 90w)?

    I have multiple extra 65w power supplies from previous machines.  The pin that plugs in to the machine is different, but there are converters to get the right size pin.  If I get that right pin, is it safe to use a 65w power supply with the HP Envy 15t, which came with a 90w supply?
    One supply (65w) says the output is 19.5v, 3.34a.  Found another extra (90w) says the output is 19.5v, 4.62a.
    The one supplied with the Envy says (90w) 19.5v, 4.62a.  I'm assuming with a pin converter, I can use the second one above?

    Hi,
    For the 65W, It will work, BUT check the tip/connector. The only problems: battery charging could take longer time and for high graphics task it may display an error message. For the 90W, again pin/connector is the main concern.
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Mini power supply works with Video iPod?

    Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
    Thanks,
    Brett

    Yes, it will work just fine.

  • Are the Apple EarPods (all functions) compatible with the iPod shuffle 5th Generation 2GB?

    Are theApple EarPods (all functions) compatible with the iPod shuffle 5th Generation 2GB?

    There is no "5th gen" iPod shuffle, but it is compatible with the current 4th gen shuffle.
    On the product listing for the EarPods at the Apple Store
    http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
    the 4th gen shuffle is listed under Compatibility.

  • Power supply delivered with AP 3502I ?

    hello,
    can somebody tell me if when I order a 3502i Access Point, does is it delivered with a power supply included for free, or does a spare power supply must be oredered separately (AIR-PWR-B=)  ?
    thank for your help
    regards
    Yvon

    Hi,
    If the device is purachsed through the channel partner then the box does contain the power supply..
    Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • Are Apples new in ear headphones compatible  with iPhones????

    Hi, I was just wondering if Apples new In-Ear Headphones are compatible with the iPhone (1stGen)
    Thanks

    Take a look at this,
    http://support.apple.com/kb/HT3310
    This should tell you what you want to know straight from Apple themselves.
    From what I've read and understand there are 4 conductors on the jack plug as opposed to three on the normal iPhone headsets.It seems that the extra conductor is probably the one that controls the volume buttons + & -
    So the volume fix may not ever be able to happen as it would seem it is hardware related.If it can be fixed with software upgrade that would be great but iphone users might have to live without the volume control if they want a set.
    Message was edited by: Anann

Maybe you are looking for

  • Error when opening application developed in jdev11.1.1.5.0 in jdev 11.1.2.0

    Dear All, I have developed an application in jdev11.1.1.5.0 and i am just trying to run it in jdev 11.1.2.0.0, first of all it migrated all files sucessfully to its own new format(it was done automatically). Now next when i try to run my application

  • " Why not Emacs Be the best editor for java"

    hai friends, iam using emacs editor for java. i think it is the best editor for java available for free of cost. we can easily customize it based on ur needs we can even customize the compilation and run option with single key stroke. and it has many

  • WLCS 3.2 Portal Switching while remaining in session

    (my previous message got truncated) Hi, I am upgrading my commerce server from 2.1 to 3.2. I have two portals that I switch around with buttons on the two different header jsp files while the same user stays in session. In my old WLCS, the header but

  • Adobe acrobat X error:  no more memory on web capture pages

    I try to create a pdf file by saving a web site and i have a memory error (out af memory) after capturing pages. I see that acrobat processus take the memory continuously during the capture process without leaving memory free. When i store the pdf an

  • App will not Load/Install and have tried multiple steps.

    To Whom it May Concern, Several weeks ago I attempted to download Infinity Blade II for the iPad (I have the most recent full-size one, the "3").  As it began to download iTunes on my iPad crashed.  When I went back to the App Store to re-download, t