Are 3rd party plugins working yet with the new "nehalem" mac pros?

specifically, I'm wondering about these plugins:
Waves
Omnisphere
East West / Play
BFD
Addictive Drums
Native Instruments / Akoustic Piano
In Logic 8.0.2
There seems to be rumors floating around of nasty processor spikes which make the previous generation a safer bet?
Anyone with first-hand experience would be awesome to hear from.
Currently these all (finally) work smoothly for me on a Dual 2.66 GHZ Mac Pro (from late 2006).
thanks

Anyone have any experience with this yet?

Similar Messages

  • Why are there so many problems with the early 2008 Mac Pro ???

    Hi everybody out there using Mac Pro's early 2008,
    I found out there is a lot of problems with the early 2008 Mac Pro.
    My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
    It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
    Cheers, Kavango

    go to a black screen after 15 minutes or a couple hours
    That is probably an indication that you need to find a new graphics card.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

    can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

    Disclaimer: This response assumes that a "new mac pro tower" is the new cylindrical model.
    1. You cannot download Final Cut Pro 7. FCP7 is part of Final Cut Studio (2009) a.k.a "FCS3" and it was only released on a DVD set. It can still be purchased online (maybe even from Apple) for prices ranging from a few hundred to $1K and it is 5 years old and unsupported.
    2. Although there are reports of systems running FCS3 on Mavericks, there are also a host of problems associated with this OS/software combination.
    3. A new version of iMovie Pro Final Cut Pro X has been released which is reportedly very fast and is supported.
    It's all a matter of what kind of movies you make...

  • What happens to Apple Color users with the new Final Cut Pro x

    What happens to Apple Color users with the new Final Cut Pro x?

    Some of the functions of Color have been incorporated into FCP X, meaning you will have more than the 3-Way-Color-Corrector but less than Color.
    Since you cannot share projects between FCP and FCP X, you might want to stay with FCS if you rely on Color.
    mish

  • Why does my google toolbar not work properly with the new updates. It was such a convenience to use the old toolbar to go to places I had visited before. Now I cannot get those old addresses with anything but Firefox 3.62 or whatever.

    Why does Google Toolbar not work with the newer versions of Firefox.

    Google have stopped supporting Google Toolbar on the latest versions of Firefox. Apparently one of the reasons for this decision is that modern browsers already tend to support many of the functions that google toolbar provides.
    Firefox does allow you to specifically bookmark sites you have chosen, and also automatically remembers many of the sites you visit.
    * see [[how do i use bookmarks]]

  • Apple thunderbolt display - Can i work it with the new MacBook Pro's, which have a HDMI Output?

    I Bought my Apple thunderbolt display around 2 years ago now, tougther with my MacBook pro. I am thinking of switching my MacBook out tough with a new one this summer.
    But will the new 2013/2014 macbook's work with my thunderbolt display???
    /Nikolaj

    Yes.  The New Retina MacBook Pro has two Thunderbolt ports.  Plug the display into one of the Thunderbolt ports.
    You will need a MagSafe adapter.
    <http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter>

  • Will the new 2012 Mac pros boot on Snow Leopard (10.6.8, installed on a HD in a 2008 Mac pro and then moved to the 2012 model).

    I keep getting fuzzy answers on this (firmware, future updates, etc.). I can make a 2 partition HD on my 2008 (3.1), with Snow Leopard 10.6.8 on 1, and Lion on the other, and then put this HD in the 2012 3.06ghz. Will it work? (It does on the 2010 2.93ghz).

    Tony https://discussions.apple.com/thread/4051765?tstart=0 Never got back and until someone who received a "new" Mac Pro 5,1 (5,2? just for laughs?) to know.
    Apple ties OS build and fiirmware and Mac ID.
    It should after all nothing really changed. In this case it has the same latest firmware that shipped iwth some 2010s
    We had discussions about this when Mac Pro 2010 started shipping with Lion last... summer/fall.
    A true Lion only system ships not only without DVDs, and with Lion, but can do a network install (it grabs a small boot loader) to pull down the installer and has enough code in the firmware. Same with AHT.
    A. It (10.6.8) works and you are fine
    B. It works only with Lion.
    What is the real question? do you need to run 10.6.8?
    There is a 1/20 chance too that it has a later build of 10.7.4, right?
    Bing: Mac OS X Builds:
    Mac Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    Mac Pro (Mid 2012)
    Jun 2012
    10.7.3
    11D2001
    Mac Pro (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3
    10F2521, 10F2554, 11A511a, 11C74, 11D2001
    http://support.apple.com/kb/HT1159#mac_pro

  • Windows Media Player plugin has stopped working since I installed Firefox 4. I have the newest version of the plugin, worked fine with the previous version of Firefox. Any ideas?

    I have tried the suggestions on the help and troubleshooting pages including uninstalling and reinstalling plugins and Firefox 4. disabling the pop up blocker did not help either.

    I have had the same problem since I installed Firefox 4.0.
    Thank you for letting us know that The RealPlayer plugin conflict, was the source of this problem.
    Another way to fix this (for good) is doing the following:
    1) Click on "Tools">Options"
    2) Click on the "Applications" tab
    3) Search in the "Content Type" column, all the applications that start with the words "Windows Media." Click on the content that is listed to the right of each application's name and choose "Use Windows Media Player (default)."
    By doing this, Firefox will avoid using the Windows Media Player plugin and will open the corresponding application directly with Windows Media Player.
    I just did this and is working perfectly. Try it and let me know how it works for you.

  • What 3rd party monitor works best with Macbook Pro?

    I am trying to find a good inexpensive monitor that will work with my Macbook Pro and my work laptop.  I bought a viewsonic before I found out that they don't support MacOSX with their driver.  The aspect ratio was never correct, it went straight to 4:3, and i couldn't fix it.  Has anyone used an AOS monitor?

    using a mini port adapter to VGA, with the VGA cable supplied by viewsonic.  I haven't tried different cable or adapter yet.  I am trying to use the external monitor with my macbook in clamshell mode (getting old eyes).  When I originally set it up the macbook immediately went to 4:3 on the internal monitor, and detected the VS monitor.  I tweaked the resolution manually and got the aspect ratio to fit into the full monitor screen, but it was stretched and the resolution had to be set way down in order to get full coverage.  With the 1920x1080 res the image was only "active" on the right 3/4 of the monitor, and even after I moved the image to the left it stayed in 4:3 and was offset to the right.  I saw something about a screen spanner doctor (?) fo rthe macbook.  WOuld that help?

  • Will my printer and scanner work with the new intel mac?

    My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
    I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
    Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
    I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
    The responses were
    "At this point in time with have been given no information on whether our printer drivers will work or not....".
    "Yes it will work with OSX 10.4"
    "As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
    I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

    Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
    Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
    Power Mac G4 (AGP graphics)   Mac OS X (10.4.4)  

  • Anyone else have difficulty using third party software and websites with the new MacBook Pro with retinal display?

    I just returned my new Mac book pro with retinal display after three very disappointing three weeks of trying to use certain websites and other third party programs (Quickbooks, Raintree) that would not function properly.  My husband own the previous MacBook Pro version with the built in CD rom and I was able to use those above mentioned websites and problems with the no difficulties.  Did I just happen to get a lemon or is this a function of the computer being too new for third party software?

    Programs such as Quickbooks pro for Mac, I was able to import my previous data and I was able to enter about 5 new transactions before it stopped being able to save transactions.  Other programs ( Raintree ) that I use via VM software as a windows based program I was able to access and use some features but not others.  On the web browsers (both safari and Mozilla) I use a website that has an analyzer feature and it would pull up a blank screen in the place where I would enter pertinent information.  They tried pulling this website at the apple store today and the same issue happened.  All these programs and website I am able to access and run smoothly with no issues on my husbands MacBook Pro , which is why I returned my MacBook.  I just wondered if others were experiencing similar issues with their MacBook with retinal display. 

  • So what blu-ray drives will work nicely with the new FC?

    So....well first...hi shane. ok, so.....is it as easy as plugging in a blu-ray drive to my macbook pro with leopard and the new final cut and burning hdv to a bluray disc right from the new compressor or is it not that easy?

    Hi
    i have an LG BE06LU11,
    http://www.lge.com/us/computer-products/optical-media/LG-external-dvd-burner-BE0 6LU11.jsp
    And yes it's plug and play-I have found you need to make sure the burner is plugged in and turned on before you open any windows to create bluray content. and best to only put in burning media when FCS asks for it which is after it has done the encoding.
    Graeme

  • Just got the new 2010 Mac Pro and the Mini DVI ports are dead

    Anyone else having this issue?
    Anyone know if they need to be "enabled" somehow?

    Yes, the adapter does seem to go all the way up to the plastic shell. And the the adapters and displays work fine when driven by either of my MacBook Pros. And there seems to be some sort of connection being made because when the adapter is unplugged, the monitor goes through its typical "I'm unplugged" test mode phases with color screens and so forth, but when I plug it in to the Mac Pro, it goes black.

  • I have an old 23 inch cinema display will it be compadible with the new retina MacBook pro?

    So I have an old 23 inch cinema display from 2006 and it's been in our basement for a few years and I'm going to buy the new MacBook pro with retina display I'm wondering if these 2 products will be compatible so I could work at my desk the display Powers up fine I just need to know if they're compatible ?

    Assuming your 23" Cinema Display has a DVI connector or a built-in DVI cable, all you'll need will be a mini-displayport-to-single-link-DVI adapter or cable, and the display should work well.

  • When are the new thunderbolt mac pros coming out

    We've been waiting for over a year for the new mac pros with new processors & thunderbolt.  When will they be released??

    A new mac pro was announced at WWDC but not that much different from current models.
    Then there's this:
    Tim Cook Confirms That The Mac Pro Will Get A Big Refresh 'Later Next Year'
    and this,
    Mac Pro refresh irks Andy Hertzfeld, Apple confirms revisions 'likely' in 2013 (update)

Maybe you are looking for