Are 8gb microSDHC cards compatible with the E90?

I recently puchased a E90 and I would like to know if it is possible to use a 8gb MicroSDHC card.
Thanks

SD and SDHC are two totally different technologies packaged inside the same kind of format. SDHC card readers are backwards compatible with SD cards, but SDHC cards cannot be read in a regular SD card reader.
One of the limitations of SD which led to the development of SDHC in the first place is the maximum capacity of 2GB. Therefore, if the specs of a phone say that it can read 4GB cards then it's fitted with an SDHC card reader and 4GB+ cards will be usable.
If the specs of a phone say that it can only accept cards of up to 2GB then it is fitted with a regular SD card reader and SDHC cards will not work. No amount of software upgrading will help because the hardware simply isn't there to handle SDHC cards.
Those SDHC-compatible phones that "max out" at 4GB might benefit from a firmware upgrade because this limitation is indeed software-related.
The reason why those 8GB SanDisk cards (I have one in my N95) come with a card reader is because that card reader is in fact an SDHC card reader. Most USB card readers available off the shelf for a few quid are not SDHC-compatible, so you won't be able to put your 8GB microSDHC card in an SD adapter, stuff that in one of those SD card readers and access it that way.
Message Edited by grschinon on 05-May-2008 11:52 AM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Looking for graphic cards compatible with the basic G5

    Help!!
    Went to the Apple Store to see if my G5 (M9020LL/A) which is the 1.6GHz PowerPC to see if it was compatible/could drive the 30" cinema display. They assured me my G5 could handle the large display. I have OS 10.5.8, iLife 09, 1 TB HD, 4GB RAM, NVIDIA GeForce FX 5200 Ultra with 64MB DDR SDRAM for the 8x AGP Pro slot.
    The display arrived, I get picture but not resolution. Searched for a video/graphics card that was compatible. The ATI Radeon 9600 Pro PC/Mac with 256MB was recommended. I purchased one but can only get it to work with a safe boot. Get resolution but iPhoto cannot do the photos in full screen mode. But I can get full screen photos in screen saver mode?!
    Apple support states they only recommend/support two cards for my model, the Radeon 9600 @ 64 MB, 2480X1326 res or the Radeon Pro, 128 MB, 2480X1326 res.
    Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB? Does anyone have a solution as to which card would be compatible with my G5 and get 2560X1600 res?
    Any suggestions? Thanks you for your help!

    Hi-
    Welcome to Discussions!
    Apple support states they only recommend/support two cards for my model,
    Those were the only two cards offered at the time, so that is their "official position". You may safely ignore them..... even though they lied to you regarding the 30" ACD and your machine.
    Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB?
    Often reported here on the forum.
    Not a good card. If it works, fine, but many report as you do....Safe mode only.
    The G5 can use any 8x AGP graphics card that was available in any AGP model G5.
    OEM Mac cards with dual link DVI for the 30" ACD are:
    Radeon 9650
    Radeon X800XT
    Geforce 6800 GT DDL
    Geforce 6800 Ultra DDL
    A flashed (converted WinPC card) Geforce 7800 GS may also be used.
    Any of the above cards can be found on eBay/Apple Components.

  • What is the best graphics card compatible with the original Mac Pro?

    I have an original Mac Pro with dual 2.0GHz DC Xeons.  It currently has a GeForce 7300.  I would like to know the best Apple graphics card it can support, and the best "flashed" PC graphics card it can support.  I would like to be able to play games, but it doesn't have to be on BEST settings.  What are the best GPUs that are compatible with Mac Pro 1,1?
    Thanks!!

    You may have to work at getting the ATI HD5870 to work with a Rev 1.1 MacPro, but the 5770 should be fine.  It's not as good a card as the 5870, but much faster than your original, and also a lot cheaper than the 5870!  That said, neither is particularly cheap.
    If you're techno savvy, you can have a much bigger choice, and can use a generic PC card and 'flash' it to work with the Mac.  If you use Snow Leopard or Lion, you may get it to work straight off, as they have drivers that work on many of the PC cards.

  • Are any plug-ins compatible with the trial version of Photoshop CS6?

    Are any plug-ins that work on Photoshop CS5 compatible with CS6?
    Also, the Deblur plug-in does not seem to be included in the trial version.  Will it be included in the final release?
    Thank you for your time.

    The "deblur technology demo"  was just a demonstration of technology being researched. It is not currently a feature in Photoshop or an available plugin.
    Pattie
    Duplicate discussions on the deblur concept:
    http://forums.adobe.com/message/4311029#4311029
    http://forums.adobe.com/message/4341948#4341948
    http://forums.adobe.com/message/4282590#4282590

  • Are AIR touch apps compatibles with the Samsung SUR40 ?

    We are planning to develop a multitouch AIR application (AIR 3.2 SDK) for our client.
    This application will be deployed for an interactive table inside a show room.
    We are particularly interested in buying the Samsung SUR40 (os : Windows® 7 Professional for Embedded Systems x64).
    Can Adobe confirm that AIR developement is compatible with this table or do we have to use the Microsoft Surface SDK to reach good performances ?
    Thanks,
    Flo

    Hi,
    I can also confirm that Flash AIR runs perfectly fine on the Samsung SUR40. Although I only got it to run when running in regular win7 mode. Haven't got it running from the Surface mode yet. But even in regular win7 mode you can use flash.ui.Multitouch and get access to up to 50 simultaneous touchpoints.... It's awesome!

  • Are Oakley Eyewear products compatible with the iphone?

    Has anyone purchased those Oakley sunglasses that are electronic and tried to mate them with the iphone? Not the ipod... the iphone. If so, were there any issues? Are the sunglasses truly compatible?

    No. Click here and scroll down about two thirds of the page for more information.
    (31257)

  • Is this video graphic card compatible with the motherboard?

    Hello,
    I only have one question, is  nVidia GeForce GT430, 1024MB, GDDR3, 128bit, DVI-I, HDMI, PCI-E compatible with MSI K9N neo v2 ?
    The slot for the graphic card : PCI Express 2.0 x16
    For the motherdoard: • 1 PCI Express x16 slot
                                 • 2 PCI Express x1 slots
                                 • 3 PCI slots, support 3.3V/ 5V PCI bus Interface
    Will it work? Does it lose performance?
    Thank you very much

    Yes, should works
    Quote
    Does it lose performance?
    no

  • Help, need a card compatible with the Platinum Live bay that uses the SB Live E400 midi dri

    Help , have just got a used Soundblaster Li've Platinum card and i/o bay to ease in the production of backing tracks for li've gigs etc, my old card is a li've value soundblaster that uses a Midi driver called SB Li've E400 in addition to the Sb Li've A400 and the B400 which i used to assign soundfonts etc because they are not suitable for bass and drums ,very soft sounding but i need the Sb Li've E400 to get the loud and powerful drum and bass sounds so important for my work, the Platinum set has a card Model number sb0060 and the midi input driver is called MIDI UART with midi outputs being Sb Li've UART which results in no audio o/p if assigned to a midi channel and the Li've synth A and B ,similiar to my li've value card . my Soundblaster value card is a sb0220? allthough the Platinum card is great for plugging guitars straight in and the optical output is great for recording onto mindisc the sound quality is crap,not in the same class as my old li've value card? anyone got any ideas,dont know where to go next? Cheers George.

    wouldnt put 2 sound cards in but you could try attaching the sb li've dri've to card, it will either work or it ownt, it will not work with remote, but it may just work as an io panle for your mid etc..
    However if it was my hardware i would try as thats my right and my hardware i may break, so you would do this at your own risk.

  • Is the FX5200-T128 video card compatible with an Athlon 64 CPU and a K8N mobo?

    I am building a new computer based on the Athlon 64 3000 processor and the mobo MSI K8N Neo-FSR.
    I intended to use MSI MS-8907 GeForce FX5200-T128 as the video card.
    However I have been told that this video card might not be compatible either with the Athlon 64 processors or with the mobo MSI K8N Neo-FSR.
    Is it compatible or not?
    If it's not compatible, what is the cheapest MSI video card compatible with the Athlon 64 and the K8N?
    Thank you in advance for your help.

    If it's there, it means they at least inserted the card, booted, and installed drivers, as far as what they do from that point is anyones guess. You will see the far right column shows 4x or 8x.
    I agree, it is minimal info at best and not my idea of what should be included in a test report.
    I don't see any reason why that card would not work, the market is saturated with that type of card.

  • Which video crd's are compatible with the H8-1414

    Does anyone know Which video crd's are compatible with the H8-1414

    Hi,
    The H8-1414 has the AMD 7450 video card which is a good video card for an UEFI enabled PC with a 300 watt power supply.
    A higher performing video card that will run in UEFI mode would require a bigger power supply and then there would be numerous cards depending on your application requirements.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • What monitors are compatible with the Mac mini?

    What monitors are compatible with the Mac mini?

    Is this the new Mini?
    Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    512 MB*
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

  • What cameras are compatible with the ipad ?

    What cameras are compatible with the I pad?

    With the camera connection kit you're able to plug in regular SD cards with one adapter, while the second adapter does include a USB port to plug your camera in. I just remember reading that "most cameras" are compatible.

  • What cameras  are compatible with the camera connection kit

    what cameras are compatible with the camera connection kit and ipad2

    I also recently bought the camera kit and found that it worked fine as long as you don't format the SD card using PC. Once I re-formatted using my camera I could once again upload my photos. that was until I switched formats to Adobe RAW, it seemed unable to upload again. So I switched to S RAW and that worked fine. Sometimes my kit won't upload photos but I find that by just re-inserting the card it works fine.
    Haven't tried video yet, but I recently learned that the devices are quit sensitive to the "Format"(that needs to be FAT32, or exFAT- but in this instance it needs to be formatted by a Mac).
    Good luck

  • I wish to know whether the new NVidia Quadro K2200 graphic card is compatible with the Mercury Playback Engine.  Thanks

    Hi.  I wish to know whether the new NVidia Quadro K2200 and K4200 are compatible with the Mercury Playback Engine in Adobe Premiere Pro CS6.  My old graphic card NVidia Quadro FX580 is not listed and not effective apparently because Mercury Playback Engine is effective as from 1Gb RAM. I use a HP workstation and AVCHD (AVCCAM) and DSLR full HD.  Thanks.
    Message was edited by: Brittany Mauriss
    Deleted private user information (email address)

    It is compatible, but why anyone would want such a weak and slow card at a premium price is beyond me. See Tweakers Page - What video card to use? and GeForce GTX980 vs Quadro k4200 (2200) #2.

  • Content Tab: None of the fact tables are compatible with the query request

    Hi All,
    **One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
    I have made a rpd the joins in physical layer as shown below:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
    And the BMM layer as:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
    Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
    Dim - Comment Code Details
    Fact - Complaint
    Dim - Service Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
    I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
    When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
    Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
    Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
    Thanks in advance,
    Dev

    Hi Deepak,
    Option 1:
    My tables in physical layer are joined as below:
    D1--> F1 <--D2--> F2 <--D3
    Same way i model it in BMM
    D1--> F1 <-- D2--> F2 <--D3
    Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
    I go Sources>content tab of Fact F1 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Detail
    D2---------------------- D2 Detail
    D3---------------------- D3 Total
    then, I go Sources>content tab of Fact F2 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Total
    D2---------------------- D2 Detail
    D3---------------------- D3 Detail
    Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
    I need to know whether the way I have modeled it in BMM is right,
    Option 2:
    I can combine the two facts in a single Logical Fact or the above design should also work.
    (F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
    what will be the content tab details?
    Thanks,
    Dev

Maybe you are looking for