Are Adobe Captivate swf files not compatible with IE8 or IE9 when inserted into RoboHelp projects?

Hi,
I've published Adobe Captivate swf files and then inserted them into my RoboHelp project. I then synced my RoboHelp project with our website and the videos within online help are not functioning in IE8 or IE9. They are only working in IE11.
Thanks,
Jaimie

Hi there
When a SWF plays in IE, it uses the Flash Player ActiveX control. I'm not 100% sure that different versions of IE would share the install. So if you have one version of IE on your machine, perhaps it either doesn't even have the control added in or it's the wrong version.
One thing I would check in the browsers where the content seems to be missing is to right-click the blank area and see if you coax a Flash pop similar to below:
Then note the version number.
You may find that all that you (or others) need to do is ensure you have at least a specific version of the player/add-in installed.
Cheers... Rick

Similar Messages

  • Can't open file--"not compatible with this version"

    I can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version" can someone help me.
    thanks

    hi kirsti
    I use windows 7 and photoshop cs5
    thank you
    Am 02.05.2012 19:06, schrieb Kirsti Aho:
    >
          Re: Can't open file--"not compatible with this version"
    created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in
    /Community Help Application/ - View the full discussion
    <http://forums.adobe.com/message/4374618#4374618

  • Adobe acrobat 5 is not compatible with windows 7.  Need replacement that will work.

    adobe acrobat 5 is not compatible with windows 7.  need a replacement that will work.  any suggestions.

    I would recommend Acrobat 10.  You can find more details as well as a trial at http://www.adobe.com/products/acrobat.html?promoid=JOLIR.  It should be noted though that Acrobat 5 is too old of a version to qualify for the upgrade price I am sorry.

  • Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

    Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

    Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
    There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
    http://www.floodgap.com/software/tenfourfox/

  • Kernel: AVVideoCard::probe: This driver is not compatible with model MacBookPro5,5 when running kernel version 11.0.0. Loading will abort.

    Hi
    Since my update I am getting the following message in my console:
    11-07-22 3:27:45.000 PM kernel: AVVideoCard::probe: This driver is not compatible with model <MacBookPro5,5> when running kernel version 11.0.0. Loading will abort.
    Anyone know what this means and the solution?
    Thank you

    Me too. The specific message on my 13' MBP is:
    12/5/11 11:06:32.539 AM usbmuxd: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
    12/5/11 11:06:33.000 AM kernel: AVVideoCard::probe()
    12/5/11 11:06:33.000 AM kernel: AVVideoCard::probe: This driver is not compatible with model <MacBookPro5,5> when running kernel version 11.2.0. Loading will abort.

  • "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode"  when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode" 
    when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    You should probably post your question on the Parallels forums:  http://forums.parallels.com

  • I tried to install seo spyglass errror message said not compatible with mozilla firefox. When will mozilla make spyglass cpmpatible?

    tried to install seo spyglass error message said not compatible with mozilla firefox. When will mozilla make spyglass compatible?
    I need this plugin for my affiliate business and enjoy using firefox.
    Seo spyglass may work with IE but I'd rather use firefox

    tried to install seo spyglass error message said not compatible with mozilla firefox. When will mozilla make spyglass compatible?
    I need this plugin for my affiliate business and enjoy using firefox.
    Seo spyglass may work with IE but I'd rather use firefox

  • Photoshop CS2: "file not compatible with this version of Photoshop" error

    So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
    Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
    OS: OSX 10.4.11
    Photoshop CS2
    Info:
    Kind: Adobe Photoshop file
    Size: 394.4MB
    Created: December 13, 2007
    Modified: Yesterday at 3:54 PM

    This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please
    cease and desist immediately
    in the event you are currently experiencing problems with one or more files.
    Working across a network is not supported.
    See:
    http://www.adobe.com/support/techdocs/322391.html
    Copy the
    CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
    Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
    not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
    If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • CS6 file "not compatible with this version of Photoshop"

    We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

    You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

  • File Not Compatible With This Version

    I opened and created various files today, and after saving and trying to reopen I get this error:
    "Could not complete your request because the file is not compatible with this version of Photoshop."
    One of the same files opened just fine earlier, and after opening and making small changes to adjustment layers and resaving, I encountered this error.
    I did some searching, and all the causes seem to be related to using large files, Network Storage and Norton Anti-Virus. However, my files are under 2 gb, created locally (not on a Network Drive) on a machine that does NOT have Norton Anti-Virus. Hard drive was replaced on this machine in the last 3 weeks, so it's unlikely that there's an issue with that.
    Any other possible explanations? All of the posts I've seen on this topic seem to be related to Smart Object and/or Placed Photo/Video layers. Perhaps it is a Photoshop glitch related to certain types of Smart Objects / Placed Photo/Video layers?
    Running:
    MacBook Pro Mid-2010
    Mac OS X 10.6.4
    Adobe Photoshop CS5 Extended Version 12.0.1
    8 gb RAM
    341 gb free space
    Intel HD Graphics & NVIDIA GeForce GT 330M
    Thanks!

    What you can try..
    Create a blank doucument in photoshop .
    Try to place the file on that by Goint to File -> Place .
    It works if its not a multi layered  file.
    - Vishal

  • Adobe Acrobat 6.0 not compatible with windows 7

    Hello,
    Some years ago I bought Adobe Acrobat 6.0 which I placed on my old computer. Now I have a new computer with windows 7 and the acrobat 6.0 version apears not compatible with this windows version. Does anyone know a solution?
    Thanks in advance.
    Best wishes,
    Arjen

    If you have Windows 7 Professional, Enterprise, or Ultimate, you can download Windows XP Mode and attempt to install Adobe Acrobat 6 in the virtual environment. Windows XP Mode uses Windows Virtual PC to run a full Windows XP Professional 32 bit environment virtually, and it is a free download. A limitation you may encounter is that the PDF printer will not be accessible from your Windows 7 programs, only from programs which are installed in the Windows XP Mode environment.
    This subject has been discussed on several forums, and while Acrobat version 6 does install and work for some users, the PDF printer does not install on Windows 7. Version 9 was the first version which was compatible with Windows 7, so if this is critical to you, you should consider upgrading to the latest version of Acrobat.
    David
    Windows Outreach Team – IT Pro
    The Springboard Series on TechNet

  • CS3 file not compatible with Photoshop CS4?

    My son uses Photoshop CS3 at college. He worked all day on an image (120MB), and saved it on a USB stick. When opening at home with Photoshop CS4, the "Reading Photoshop format" appears, then an error message "Could not complete your request because the file is not compatible with this version of Photoshop."
    He has been burned before by a USB stick, but all the other files seem OK.
    Is there a solution to this?

    ^First thing I did was make a copy.
    QuickTime Picture Viewer (which seems to open other PSD files) says it is corrupted.
    Adobe Bridge can read the metadata, gives no preview, and won't open the file.
    Any other thoughts?

  • File not compatible with the version of windows

    Already downloaded the file but when I install it says that the file is not compatible with the version of windows. But my PC is windows 7, 64bit

    I dowload from several different sites and all give the same message. from the adobe site too.

  • How do you burn a video file not compatible with quicktime?

    Hello all,
    I am very new at this so I apologize if the solution is very simple - i just can't seem to work this iDVD thing...
    I've searched through the forums and can't seem to find exactly what I need, please point me in the right direction if a solution has already been posted elsewhere.
    Okay, so my problem is trying to burn movies to DVD. I don't actually have to use iDVD, but it's the only solution i've come up with. My problem is when I add a movie file (lets say, something that will ONLY OPEN with VLC), and press preview, no movie files show up... but when i put in a video file that will play with quicktime, the preview works fine.
    So i suspect the preview wont play because the file is not compatible with quicktime.
    have any of you tried this? All i want is to be able to play a downloaded movie on the dvd player downstairs
    regards,
    Peter

    iDvd is not a general burn utility. However, there's a very good chance (whatever that file is) that Toast will burn it to Dvd-R. And if not (which is unlikely) then do as suggested already and use Mpegstream Clip. It's 100% free! However Mpeg 2 playback component may run you a few bucks (if needed).
    Or the alternative is to invest hundreds of dollars in Apple software and use apps like FCP and DVDSP (or FCS) along with QT Pro. Nine times out of ten this combination tends to work well ... but it ain't cheap (not to mention a rather steep learning curve).
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Adobe flash player 11 not compatible with Dragon NaturallySpeaking "help"

    Adobe flash player 11 is not compatible with my Dragon Naturally Speaking software. How can I or where can I download flash player 10?

    Try here for a list of the various Adobe flash player versions:
    http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
    scroll down to bottom for the actual downloads.  (Note that I got the same problem with Dragon NaturallySpeaking, and I had to uninstall the latest Flash update.  Now I have to find an appropriate Flash version to reinstall / reenable Flash.)

Maybe you are looking for