Are all Apple I pad 2 equipped with the IOS 7?

Are all Apple 2 have the IOS 7 installed if you puchase a new one.

On the box, it will show a picture of the iPad - you can look at the home screen shown in the picture to determine what iOS it's running. Assuming you are buying at a store, you can ask them if they can specifically look for an iOS 6 iPad. There's no guarantee they will have any.

Similar Messages

  • Are there honestly any apps that work with the ios 7 beta?

    I have tried to dodwnload soo many apps but they all just say unable to download at this time please help!

    If you are an authorized member of Apple's developer program, you have forums and resources through which you can address issues with seed versions of Apple's software. Posting here or in any public forum is a violation of your NDA with Apple. If you are not an authorized developer, then you have an illegal copy of the software.
    Either way, we cannot help you with questions about unreleased Apple software in these forums.
    Regards.

  • I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

    I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • Are all Apple devices chargers the same, or do iPads use different chargers

    Are all Apple devices use the same chargers iPhone4, iPhone5s and iPad3 and 4 with retina the same?

    Hi Ralph Landry1
    Welcome to Apple Support Communities!
    The iPad use a 12W USB Power Adaptor.
    Where as the iPhones use a 5W USB Power Adaptor.
    The iPod Touches use either a 5W USB Power Adaptor or they can run off a iPod USB Power Adaptor.
    The difference in the Watts can be found in the bottom of the adaptor (it will say 5W, 12W or iPod)
    All iPhones and iPods can run off the 5W or iPod Adaptor.
    However for the iPad to be sufficiently charged in needs the 12W charger (hence sometime when plugged into a computer it will say 'iPad is not charging') The iPad needs the 12W to charge - this takes 5hrs otherwise.
    The iPad charger is here: http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c
    The iPhone charger is here: http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=48
    Apple no longer sells the iPod USB Power adaptor and as such the iPods now just run off the 5W charger here: http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=74
    The chargers have changed shape over the years yet the old ones will still do the same job.
    Many Thanks and Enjoy charging!
    iBenjamin Crowley

  • In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "

    In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "Could not complete your reequest because of a program error.  "
    Linda

    In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
      2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
    ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

  • [svn] 4293: Timer usage cleanup to ensure all listeners are fully removed once we' re done with the underlying Timer.

    Revision: 4293
    Author: [email protected]
    Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
    Log Message:
    Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
    QA: No
    Doc: No
    Checkintests Pass: Yes
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

    Revision: 4293
    Author: [email protected]
    Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
    Log Message:
    Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
    QA: No
    Doc: No
    Checkintests Pass: Yes
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

  • My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

    My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

    I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire).   I'm also going to guess that either your DirecTv or your Blueray has a component output option.  If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
    I doubt you will be able to tell the difference on your DTV.  Most of the stores that demo HD use component wiring on their store models.  The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.) 
    Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching.  I think I use my BluRay about 5% or less of my viewing time.  If I "tossed", I wouldn't shed a tear.

  • HT4623 updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

    updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

  • The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there.  I have changed my email address on my iMac but my old one still remains on the iPad.  Also changed password.  Nothing works!  I can't use the iPad like this!

    The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there.  I have changed my email address on my iMac and also changed my password.  The old email address is still on the iPad.  Anyway, I can't use the iPad because can't get the apple id password box to go away.  Thanks for any help!

    This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

  • TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

    My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

    1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
    By any chance, are you uswing Kaspersky security software?
    If so, see:
    [With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

  • HT6058 Hello I have a iPhone 4 that's never been updated and I see there are three available, Should I just go with the most recent update ?

    Hello I have a iPhone 4 that's never been updated and I see there are three available, Should I just go with the most recent update ?

    You don't get a choice. If you decide to update, your phone will be updated to the latest iOS version available for your phone. For you, that's iOS 7.0.4.
    Make sure you follow the directions here:
    http://support.apple.com/kb/ht4972
    The update to iOS 5.0 & higher is an erase/restore deal.

  • What is the best all in one printer that works with the iPad

    The best all-in-one-printer to use with the ipad mini

    Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
    See the Airprint printers on the Apple store site:
    http://store.apple.com/us/ipad/ipad-accessories/printers#!
    Matt

  • The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

    When i tried to login in inbrowserediting.adobe.com i see that:
    The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
    What does it mean? What is problem?

    Hi,
    I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
    its saying the following
    "The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
    Yet i Can access my website fine "www.calmwood.com.au"
    My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
    so i am not understanding how it thinks its different. when its fully referenced
    any help would be appreciated.
    thanks

  • HT201412 I recently received an update option with the iOS 6 update on my iphone 4. I pushed ok and after 30 minutes it told me to connect to itunes and reset my phone. I did and the results are my phone now has a blank grey screen and then powers on and

    I recently received an update option with the iOS 6 for my iphone. After clicking ok, my phone wanted to conect to itunes. After that it wanted me to reset the phone and after all of this was done my iphone had a grey screen and now turns on and off again on its own with out ever going past a grey screen. It will not reconect with itunes of function at all. Please help

    http://support.apple.com/kb/HT1808

Maybe you are looking for