Are backup notifications in Oracle 11g DB covered in notification rules

I had a query whether a notification for backup job completion in Oracle 11g database is covered in the notification rules section available in enterprise manager. I could not find any other way of sending notification from EM so was wondering if the notification for backup job completion is covered in the notification rules section.
Please revert with the reply to my query.
Regards

My understanding from your answer is as follows:-
1) The email addresses have to be entered in Preferences->General. Say I enter [email protected] & [email protected]
2) In Preferences->Notification Schedule, we can specify either of [email protected] or [email protected] and we cannot specify [email protected] as it is not included in Preferences->General?
I have tried to put the observations as examples, request you to please check and revert with examples if my understanding is not correct.
Regards

Similar Messages

How to take a backup manually in oracle 11g express edition?

how to take a backup manually in oracle 11g express edition? i want to take backup of a database and want to restore later on on a different computer .

Stop database, and copy all files to another machine.That sounds to me to be the closest answer to the question posted. And perhaps the easiest solution.
Install XE on the "another machine", shut it down. Shutdown the source database. Copy the datafiles to the new host. Startup your "new" database, it will be an exact clone of the original.
To find out what files need to be copied, as system (or sysdba) run:
select name from v$datafile;
... file1, file2 ...
show parameter control
... control_files ... file1 ...
alter database backup controlfile to trace [reset logs];
show parameter diag;
... diagnostic_dest ... <drive:>|/diag_pathTo do a proper database clone its better to recreate the controlfile and reset the archive sequence number- leave out the controlfile copy part. In the diag_path location find the trace file under diag/rdbms/$ORACLE_SID/<db_name>/trace it should be the latest ora*.trc file.
The trace file has the commands to recreate the controlfile, which includes the datafiles and putting the tempfile back in place. If the datafiles are in a different location, i.e. in Windows going to a different drive, or you want do put datafiles in a different folder location, the create controlfile statement is the easiest time to get the file directories right.
If you add the "reset logs" qualifier (don't use the brackets!) you'll get just the reset logs version of the create controlfile statement, otherwise you'll get both NORESETLOGS and RESETLOGS versions of a create controlfile statement, run one or the other. Not both. Not the entire trace file, just the create controlfile, alter database open [reset logs], alter tablespace temp add tempfile ... bits. No recovery is needed for a database that is shutdown when datafiles get copied to a new location/host.

When is delete all obsolete backups triggered in Oracle 11g DB

I have a query as to when delete all obsolete backups triggered in Oracle 11g DB. We changed the RMAN retention policy to 10 days from 14 days in our setup. Is it triggered manually by delete all obsolete from Availablity->Manage Current Backups in OEM or is it triggered automatically every time RMAN backup is done?
I hope, my question is clear.
Please revert with the reply to my query.
Regards

975148 wrote:
I have a query as to when delete all obsolete backups triggered in Oracle 11g DB. We changed the RMAN retention policy to 10 days from 14 days in our setup. Is it triggered manually by delete all obsolete from Availablity->Manage Current Backups in OEM or is it triggered automatically every time RMAN backup is done?
I hope, my question is clear.
Please revert with the reply to my query.
Regards
First, I would never manage my backups in OEM. When the crunch comes at 2:00 am, I don't want ever more moving parts to be involved in recovery.
Second, the only thing approaching a "triggering" of deletion of backups is if your backups are in the FRA ... rman will, at the time of making a backup .. attempt to delete obsolete backups if necessary to free up space in the FRA.
Other than that, oboslete backups are only deleted in response to a direct DELETE OBSOLETE command. This command may optionally ( as shown by TigerDBA) include a run-time obsolesence rule, or it may depend on the standing configuration.
Another thing to note is that backups are NOT marked as obsolete. They are EVALUATED for obsolescence in response to a DELETE OBSOLETE or REPORT OBSOLETE command.
And one final thing to not is that all recovery must begin with a full backup. That would be the most recent full (or level 0 incremental) backup prior to the point in time to which you need to recover. That means the most recent full (or level 0 incremental) backup will never be considered obsolete, regardless of how old it is.

What are the steps in oracle 11g DBREFRESH

Dear Techies,
Please help me on below. I followed all steps in db refresh
I have done till
Alter database open resetlogs
status is open
what are the steps remaining in oracle 11g dbrefresh from PRD to QTY. is there any post steps to drop old ops$users.
Please let me know.
Thank you
Best Regards
RJ

Hi Gurpal,
Thank you for your valuable reply
Do I need to do your mentioned steps after below steps
RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL;
AUTO.
once recovery is done CANCEL.
Alter database open resetlogs.
status is open.
AS YOU MENTIONED
Make sure listener and DB should be up.
Determine Schema Owner
SQL> SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'T000';
Check the OWNER of “SAPUSER”
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
Create OPS$ User
Use the oradbusr.sql script. This script is attached to the note 50088. The script is valid for Oracle and UNIX. Use the following syntax
SQL> @ORADBUSR.sql SAPR3 UNIX (SID) X
Check the OWNER of “SAPUSER" after exceute command
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
If the system returns an owner <owner> other than OPS$<sid>ADM (OPS$SIDADM) of PRD, you must
delete the relevant SAPUSER tables:
SQL> DROP TABLE “OPS$SIDADM".SAPUSER;
and after that check the output of (R3trans -d)
set the value in profile parameter
To ensure no background jobs after the start (Rdisp/wp_no_btc =0)
(Login/no_automatic_user_sapstar =0 )
or Any table spaces need to be create ???? PSAPTEMP ??? or any.
Thanks & Regards
RJ

Monitor the online backup progress in Oracle 11g (RMAN)

Hi,
is there a simple way to see the progress of the online backp for oracle?
We are using oracle 11g and using RMAN td level-0 and level-1 backups in the SAP environment(SAP Netweaver 7.01)
Regards,
Rakesh

Thanks Siva!
I was looking for something like a script which tells me the running backup progress.
Like the following script which tells the status of RMAN backup (completed/failed):
col STATUS format a9
col hrs format 999.99
select
SESSION_KEY, INPUT_TYPE, STATUS,
to_char(START_TIME,'mm/dd/yy hh24:mi') start_time,
to_char(END_TIME,'mm/dd/yy hh24:mi') end_time,
elapsed_seconds/3600 hrs
from V$RMAN_BACKUP_JOB_DETAILS
order by session_key;
regards,
Rakesh

DB13: Execute Redo log backup of remote Oracle 11g database fails

Dear Experts,
First of all I have to state I am not very experienced in administrating (Oracle) databases, but I would like to ask you all the following:
We run two SAP Systems with each their own database on the same host:
1. SAP SRM ABAP system on Oracle 11g
2. SAP NetWeaver WebAS Java (Portal) on Oracle 11g
We would like to schedule backups of the Java database in transaction code DB13 on the SRM ABAP system.
Actions already taken:
- We have maintained the proper database connection to the Java database and have set file system permissions correctly (according SAP Note 102570). Connection in transaction DB02 is fine and stats are showing for both databases.
- We have maintained enviroment settings for <SID>_ORACLE_HOME and <SID>_SAPDATA_HOME and for the shell (csh).
- Destination SAPXPG_DBDEST_<host> is maintained in SM59.
When we schedule a Redo log backup of Java System in DB13 and execute immediately, we receive the following error:
Process died due to signal 11
SXPG_COMMAND_EXECUTE mislukt voor BRARCHIVE - oorzaak: unknown
Any tips?
Thanks in advance & Best regards,
Jan Laros

Hi Eduardo,
Thank you for your reply.. Today I am at another customer, so I can not check it. But is seems to me that the BRTOOLS are up-to-date as we installed the system fresh and imported the Support Package and kernel updates right afterwards.
I will check which BRTOOLS are used tonight, anyway.
Best regards,
Jan

Backup and Redundancy Oracle 11g

Hi,
1. If we set the redundancy to 2, does it mean 2 level 0 backups taken at 2 different points in time one after another or does it mean 2 copies of the same level0 backup?
2. What is the effect of redundancy 2 on incremental backups? Are they also going to be 2 copies?
Thanks & Regards,

Vijay.Cherukuri wrote:
Hi,
Have you read the above link ?
Assume a different case in which REDUNDANCY is 1. You run a level 0 database backup at noon Monday,
a level 1 cumulative backup at noon on Tuesday and Wednesday, and a level 0 backup at noon on Thursday.
Immediately after each daily backup you run a DELETE OBSOLETE. The Wednesday DELETE command does not remove
the Tuesday level 1 backup because this backup is not redundant: the Tuesday level 1 backup could be used to recover
the Monday level 0 backup to a time between noon on Tuesday and noon on Wednesday. However,
the DELETE command on Thursday removes the previous level 0 and level 1 backups.
Also please see : http://web.njit.edu/info/oracle/DOC/backup.102/b14191/rcmconc1007.htm
As far i know RMAN does not delete backups if they are needed for recovery although they are obsolete (crossed retention policy )Not until you issue DELETE OBSOLETE.
Please note that backups are not marked obsolete. They are evaluated for obsolescence when a command that references obsolescence (DELETE ... or REPORT ...) is issued. You can change your retention policy all you want, but until you actually DELETE OBSOLETE, nothing happens to those backups. Then they will be deleted (or not) as per the retention policy that is in effect at the time of the DELETE OBSOLETE command.
That said, it is my understanding that if you keep your backups in the FRA, oracle will automatically delete obsolete backups if needed to free up space for newer backups. I've not personally investigated this so could be wrong. If this is the case, I would imaging that oracle still would not be deleting a backup as soon as it becomes obsolete, as that would require constant re-evaluation, but rather when it determines that it needs to find some space for a new backup.

Error while configuring Oracle 11g Forms/Reports Product during istallation

Dears,
We are trying to configuring Oracle 11g Forms / Reports during istallation.
OS using: Win 7 -- 32 bit
RAM: 4 GB
We have installed the following modules successfully.
Following are the steps which we have followed:
1. Installation of Oracle jdk's --> Successful
2. Installation of Oracle web Logic Product --> Successful
3. Installation of Oracle Forms & reports Products ---> Successful
4. Configuration of Oracle 11g Forms / Reports Products --> Failed
After performing step 4, we are getting an error in the .out file
Can anyone please let us know what we have to do for making the step 4 successful.
Following is the content present in the "install2012-08-30_04-43-55PM.out" file..
Setting ORACLE_HOME to C:\Oracle\Middleware\frs11.1.2
Setting Doracle.config.mode to true
Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/classic.jar
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/template.jar
[email protected]lassicPage.ScreenRes
configFileName:C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM\ext\jlib\footprint.xml
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:75
DOMAIN_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:90
STATICPORT INI FILE LOCATION=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:99
PROXY HOST NAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:102
PROXY PORT NO=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:105
PROXY BY PASS ADDRESS=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
In processErrorMsgStringOracle Instance
needWritableDirectory: false
needWritableDirectory: true
middlewareHomeLocation:C:\Oracle\Middleware
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
weblogicHome:C:\Oracle\Middleware\wlserver_10.3
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
In processErrorMsgStringInstance Name
In processErrorMsgStringunknown
In processErrorMsgStringOracle Home
In processErrorMsgStringDomain Name
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator Password
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringunknown
configuration Failed. Exiting configuration due to data validation failure.+
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-08-30_04-43-55PM.log
in writeProfile method..
+[ENGINE] Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.+
Thanks in advance..
Suhail
Edited by: 956027 on 30-Aug-2012 23:13
Edited by: 956027 on 30-Aug-2012 23:14

Following is the last part of thecontent in .log file
This is the only part wher I have found the term "error"
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of domainName+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] domainName: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of wlHome+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] wlHome: C:\Oracle\Middleware\user_projects\domains+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] mwHome: C:\Oracle\Middleware+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] errID ====>>>>:INST-07277+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error:Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Cause:Specified Domain name is either not valid or the domain location already has a domain with the same name.+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Action:Enter a valid Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: weblogicQueries.isValidDomainHome+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: FAILED+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Inputs passed to the handler: [ FIELD DOMAIN NAME ( field ) = "Domain Name" ], [ DOMAIN_NAME ( val ) = "frsDomain" ], [ INVALID_TEXT_CHAR_MSG_STRING ( invalidCharMsgString ) = "unknown" ], [ Valid Character List for Farm Name ( regEx ) = "[\p{Alnum}_-]+" ]+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper] [SRC_METHOD: launch] Handler class: class oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch begin: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Entering method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of isCanBeBlank+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of val+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Value to be tested: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of field+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Text Field name: Domain Name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of regEx+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Regular Expression: [\p{Alnum}_-]++
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of minlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of maxlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of invalidCharMsgString+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Invalid Char Msg String: unknown+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for minimum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for maximum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for invalid characters+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: SUCCESS+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER+

About oracle 11g

One of the new feature about oracle 11g is continuous query notification. Where can I find the detail information about it?

On the 11g new features manual it states:
"1.1.6.4 JDBC Support for Continuous Query Notification
This feature allows Java Applications or Containers to subscribe to SQL queries watch list in the database and be notified when:
* DML or DDL changes affect the objects associated with the queries, or
* DML or DDL changes affect the result set
The notifications are published when the transaction (DML or DDL) commits.
Java Applications and Container prevents unnecessary database querying and implements efficient and consistent result set caching and cache invalidation."
You may read further at Database Change Notification.
~ Madrid

Oracle 11g RAC on Windows 2008 R2 VMware EXS 3.5 virtual machines

Hi,
We are planning to Install Oracle 11g R2 RAC on two VMware EXS 3.5 Windows 2008 R2 servers.
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).
Please guide me the best approach for the RAC configuration on VMware EXS 3.5 Win 2008 R2 Guest servers.
any help will be highly appreceiated.
Thanks.

Hi,
Is this implementation to production environment?
Be aware:
Is Oracle RAC on VMware supported? No, we do not support Oracle Software including Oracle RAC on VMWare.
Aside from the support restrictions for the database on VMWare outlined in Metalink Note 249212.1, there are technical restrictions that prevent the certification of Oracle RAC in a VMWare environment.
*RAC: Frequently Asked Questions [ID 220970.1]*
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).Check if below can help you.
http://vmzare.wordpress.com/2007/02/19/vmware-raw-device-mappingrdm/
Regards,
Levi Pereira

Does Oracle 11g Express Edition 11.2.0.0 support the impdp utility ?

Hi,
We are trying to import an Oracle dump within a Express Edition, without success. We got the error message: ORA-39213: Metadata processing is not available.
A) Source data base: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
B) Target data base: Oracle Database 11g Express Edition Release 11.2.0.2.0
Searching for solution led us to following forum entries:
1. http://kmpdba.wordpress.com/2012/05/02/ora-39213-metadata-processing-is-not-available/ Cause: DBMS_METADATA_UTIL package does not successfully ran. Solution: to install (among others) SQL> @$ORACLE_HOME/javavm/install/initjvm.sql
2. But: there is no @$ORACLE_HOME/javavm/install/initjvm.sql scrript -> http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html -> Oracle 11g EX does not support java
Questions:
a) Does support Oracle 11g EX the impdp utility at all ?
b) How would it be possible to import the above mentioned dump from (A) into (B) ?
Thanks in advance,
Michel

Sounds like the messing xsl files issue here: Upgrade from XE10 to XE11
Try
execute sys.dbms_metadata_util.load_stylesheets;and see if you get the missing xsl files error.
The XSL files are not distributed with Oracle 11g XE, but seems to be pre-loaded in the default database created by the installer. If you try to create your own database it wont have the stylesheets loaded and you'll need the xsl files to load them up.
The quick solution will be to copy the 180 xsl files from an Oracle 11.2.0.2 Enterprise to your Oracle 11g installation ($ORACLE_HOME/rdbms/xml/xsl/) and load the stylesheets.

IPlanet 6.0 SP6 compatibility with Oracle 11g Client in Windows server 2003

Hi All,
We have issues with our classic ASP application when connecting to Oracle 11g. Our application Database is migrating from oracle 10g to oracle 11g, with oracle 10g we don't have any issues but we are facing issues with Oracle 11g database
We are running iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 (formerly known as Chili!Soft ASP) on windows 2003 machine for running ASP application.
The connection we are trying is
Provider=OraOLEDB.Oracle; Data Source=xxxx;User Id=xxx;Password=xxx;
The error we are getting is "OraOLEDB error '80004005' "
Question: Is iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 is compatible with Oracle Client 11g in Windows 32 bit machine
Appreciate your quick response
Thanks,
Murthy

I have the same situation. Could you please share your experience if you resolve it? Thanks.

Oracle 11g upgrade issues

Hello :
We recently migrated our database from 9.2.07 (RBO) to 11.2.0.1 (CBO) ( Solaris 10 Sparc 64 bit ). Ever since the migration happened we are experiencing the following issues:
1. Execution plans are very costly. ( Please note that we moved from RBO to CBO )
2. High Gets / Reads
3. High CPU Utilization
4. High waits on 'DB FILE SEQUENTIAL READ'
5. This situation is vitually killing all our applications performance.
I know that oracle 11g explicitly does not support RULE based optimizer , but is there any parameters that can force it go the RBO way.
I would really appreciate your help.
Regards,
BMP

Officially it is no more documented http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/initparams165.htm#i1131532
but it is still accepted:
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0      Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> alter system set optimizer_mode=rule;
System altered.
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_capture_sql_plan_baselines boolean     FALSE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      11.2.0.1
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      RULE
optimizer_secure_view_merging        boolean     TRUE
optimizer_use_invisible_indexes      boolean     FALSE
optimizer_use_pending_statistics     boolean     FALSE
optimizer_use_sql_plan_baselines     boolean     TRUEEdited by: P. Forstmann on 1 sept. 2010 20:21

Oracle 11g Enterprise vs Satandard Edition

Dear All,
I would be most grateful if you please tell me what are the benefits of Oracle 11g Database Enterprise Edition over Oracle 11g Database Satandard Edition. Don't consider license money. If you would please provide me detailed comparision of these both plus send me link on that I will be thanks ful.
Kind regards.
GM

Oracle Enterprise Edition:
Enterprise Edition is the full (top of the range) version or the Oracle Database Server. Options like RAC, Partitioning, Spatial, etc. can be purchased separately to enhance the functionality of the database.
Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
You may want to refer to this link for further details on EE and SE differences --> http://www.oracle.com/database/product_editions.html
~ Madrid
http://hrivera99.blogspot.com

Oracle 11g installation Kernel version error

Hi
We are inprocess of installing oracle 11g on solaris 5.10. Our current Solaris 10 is with kernel version (5.10-2008.03.24.13.19). . It requires kernel version (5.10-2008.10). What patch need to be installed for us to achieve this. Please advice.
The following are the operating system requirements for Oracle Database 11g Release 2 (11.2):
* Solaris 10 U6 (5.10-2008.10)
When I check with my OS team they says the currently have kernel patch ID 142909-17, which already Solaris 10 U9.Thus this Domain already fulfill the requirement

You could post to the Installation forum : Database Installation
But you should also log an SR with Oracle Support.
Hemant K Chitale

Are backup notifications in Oracle 11g DB covered in notification rules

Similar Messages

Maybe you are looking for