Are Barcodes supported better in Adobe solution than Smartforms/SapScript

With SAPScript and SmartForms, it was not possible to print barcodes from SAP on Hewlett Packard ( HP ) printers without having a DIMM module installed on the printer itself. See OSS note 5196.
I hope that in Adobe solution, the barcode support is no longer dependent on SAP's device settings but Adobe supports barcodes on HP natively? Any experiences?
Is there a list of supported barcode types available?
br: Kimmo

Dear Anto,
Your advice was not quite what I was looking for. But gave you 2 points however for general interest. You see, I want be sure, that printing barcodes from Adobe on HP printers is natively supported. It was not the case with SapScript and SmartForms. Your advice was basically concerning how to have barcodes in Adobe forms. You see, in SapScript and Smartforms you could not be sure on What-You-Get-Printed because some features like barcodes and certain fonts were device dependent.
If you personnally have an HP printer (which model?) near to you, could you please make a sample Adobe form having a barcode and print it on that HP printer of yours. Then for your interest you can make the same test from SapScript and SmartForm and you'll notice what I have meant. I'll grant you with maximum points if perform those tests.
I currently not have Adobe designer installed, so I am not able to verify from the tool itself which barcodes are supported in Adobe. Therefore I was hoping somebody would provide me a list of supported barcode types (like C128 was supported according to those OSS notes you provided). And can you adjust barcode hight and data display (the text that you can see below the barcode)?
Any SAP Adobe staff member like Markus Meisl could easily answer this question.
br: Kimmo

Similar Messages

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

What are the supported secure protocols between BizTalk 2013 R2 and Iguana HL7 interface

We are working on project where we want to transmit HL7 messages securely from BizTalk 2013 R2 to Iguana HL7 interface and receive Acks/Nacks. We came to know that MLLP adapter doesn't support SSL and the other option we are thinking
is HTTPS. Are there any better options available other than these 2 options which are supported by both BizTalk and iguana.
Also I read the following article
http://help.interfaceware.com/kb/164

Have you gone through above post .It clearly state
ACK’s are published when the Messaging Engine successfully transmits a message over the ‘wire’ and the system context property “AckRequired” is written on the message that was sent and it is set to true.
Both ACK’s and NACK’s have the following system context properties promoted which can therefore be used in filter expressions for routing:
AckType:
set to ACK or NACK
AckID:
set to the message ID of the message that this ACK/NACK is for
AckOwnerID:
set to the instance ID that this ACK/NACK is for
CorrelationToken:
flowed from the message to the ACK/NACK
I would again suggest to go through below link to design your solution
http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
Thanks
Abhishek

Adobe Solution Partners - Better to use them or go direct to Adobe?

Hi,
Our company is currently considering purchasing Adobe Connect Pro. As a result of using the trial, I have been contacted by an organisation acting as an 'Adobe Solution partner' trying to sell me the product. Can someone inform me of how this partner system works and whether it is better to use them to purchase Connect Pro rather than going directly to Adobe?
Thanks in advance...
David

You are trying to get all your music into one location on external?
Do this...
Quit iTunes.
Copy the entire /Music/iTunes folder to external drive.
Hold Option and launch iTunes.
Select Choose library... and select the iTunes folder on the external.
Go to iTunes prefs > Advanced. Make sure iTunes media folder location is set to the current iTunes folder you are using on the external.
Tick Keep iTunes media folder organized.
Tick Copy files ot iTunes media folder when adding to libary.
iTunes menu File > LIbrary > Organize library. Tick Consolidate.
Let it finishand everything in iTunes is on in the iTunes folder on the external.
You can delete Music/iTunes/ on the interanl.

Reports older than version 9 are not supported

Hello,
I tried to access crystal reports rpt files from java client application:
reportClientDoc.open(filename,0);
and I got the following error meassage as ReportSDKException:
Reports older than version 9 are not supported.
I am using the jar files of the here downloaded JRC pack as runtime libraries (actually in NetBeans IDE 7.2.1).
I tried the followiing packs:
crjava-runtime_12.2.217 : SAP Crystal Reports for Java Runtime Components - Java Reporting Component (JRC)
and
JRC 11.8
giving similar error message.
Is there any older pack available for download prior of Crystal Reports version 9 ? I could not find for very long search.
Or is there any other possibilty to access such RPT files from java? (Actually these file are generated by IBAK-IKAS Sewer Inspection Software).
I suppose VisualStudio is a possibility (which version?), but java would be better for us on our operation system platform.
thanks for any tip
Marcell

Ted,
I am actually using your JSP page code from "Ensuring Report Cleanup" blog.
All my reports have a date stamp of 2006-2009, so they are fairly recently.
And they are 3rd party, not sure I can modify them (technically or legally)
I tried to open several other reports (with more recent datestamp), and got exceptions like:
Error
Error finding JNDI name (CSGSQL_2K5)
What might be causing that and how to fix it?
(I try to open it from file system, not RAS. Running JSP on Tomcat6. maybe some XML config file missing?)
Does it mean that this report is not too old for CRViewer12, so we are one step further ?
Also, how do I pass info to that report via JSP (DB connection, parameters, etc)?
Any good documentation/books on working with CRViewer 12 with JSP ?
I could only find books on how to use CR with .NET.
Sorry for the newbie questions, very new to CR.
TIA,
Oleg.

What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe s

What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe software but have run into system requirement inadequacies etc. . . Basically, I have a new mac and CS6 runs fine. But my old macbook can only run CS5.5. Because I'm a subscriber my Adobe CS5.5 updated automatically. What happens when one day a year or two from now (or sooner) my MAC won't support the latest version of my CS subscription? Is there a way for cloud subscribers to subscribe to a legacy or an older version of CS?

Hi Wildeboer420,
Its my understanding that previous versions will still be acessible for users going forward, I copied the following from the FAQ
I am a Creative Cloud member using the CS6 applications included in my membership. Will I lose access to CS6 when CS7 becomes available in Creative Cloud?
No, if you have downloaded and installed the CS6 versions of the applications, you will continue to have access to them without interruption as long as your membership remains active. When the CS7 versions become available, you will have up to a year to download and install them and they will run on your machine along with CS6 versions.
Hope that helps,
-Dave

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

Some adobe font OpenType are not supported by dot net framwork 2

We have problem that some adobe' fonts (opentype) are not supported by dot net framework 2.0 .
we have font Adobe Arabic it is installed correctly into font folder as well as appearing in other application like microsoft word .
but is not appearing from Microsoft visual studio NET Evenrionment and also not appearing when start designing dot net window form , which display only the fonts supported by DOT NET framework 2.0
can you please recommend us ?
regards

Do *any* OpenType CFF fonts work with dot Net 2.0?
T

Getting this error when saving: Names longer than 31 characters are not supported on the destination volume

I've just tried to save a document in Pages and got this error
Names longer than 31 characters are not supported on the destination volume
Never had a problem like this before. I haven't changed disks or formatted disks. Running latest Yosemite 10.10
The only reference I can find to this error on the internet says that it's for applications prior to OS X which I think we can discount.
The only other reference I can find in the support community relates to one person with problems saving attachments in Mail and dates from early 2014.
Can anybody give me a suggestion on what I might need to do?
Thanks

What format are you saving to?
Where are you saving the files to and what is that volume formatted as?
Have you tested with files from other applications, such as TextEdit?
Peter

Hi, I want to purchase adobe photoshop, however I'm based in Zimbabwe and Zambia and I received a notification that these areas are not supported. How do I purchase adobe photoshop using a paypal account?

Hi, I want to purchase adobe photoshop, however I'm based in Zimbabwe and Zambia and I received a notification that these areas are not supported. How do I purchase adobe photoshop using a paypal account?

Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en
-http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

HT201386 many of the functions of iPhoto are lost in Photos. Why delete it? its better to remove Photos than iPhotos.

many of the functions of iPhoto are lost in Photos. Why delete it? its better to remove Photos than iPhotos.

Please use the feedback form to let the Apple developers know:
Apple - iPhoto - Feedback
Brushes, tags, captions, info panels are all essential for a photo library.

Intermittent error saving attachments from mail: "Names longer than 31 characters are not supported on the destination volume."

I am reciving intermittent errors saving attachments from mail: "Names longer than 31 characters are not supported on the destination volume."

I am seeing this too.
I Posted in similar thread 6704033
Error when saving calendar exports-names longer than 31 characters not supported on the destination volume.
Very spooky. Not always reproducible, but it happened to me while using Office365-Outlook web-based email (saving a PDF).
RE: the suggestion, checking security box "allow apps downloaded from all sites" I would really rather not do that.
On my system it is set to allow "Mac App store and identified developers."
Oh sorry, I'm on Yosemite, I see this is Mav forum...

Are there any specific files (other than swf) that are not supported in the content viewer?

Are there any specific files (other than swf) that are not supported in the content viewer?

Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?

I want to put my .m2ts movies (Sony HD recorder) on my Ipad3. It looks they need to be converted to h.264 format. Question is will Quicktime Pro work or are there any better software solutions. Running XP system. Thanks

I want to put my .m2ts movies (Sony HD recorder) on my Ipad3. It looks they need to be converted to h.264 format. Question is will Quicktime Pro work or are there any better software solutions. Running XP system. Thanks

You could try Handbrake, it works quite well.

Are wireless routers better than non-wireless ones?

Hey all,
I've come to this forum, because the last time I had a problem with my computer, this venue definitely gave me the best answers and I learned quite a bit of information.
Anyhow, I have recently moved and want to connect my computer to the optimum online (the long island version of road runner) modem. However, I need a router, because cablevision is too cheap to provide one (even though Verizon does for their DSL service, and it's about 60% of the cost of time warner, but that's not why I'm here...haha). I actually have a few questions regarding this issue.
1. Is a wireless router going to give me as much as speed as a non-wireless one? (Keep in mind, I live way out east on the island, where it's pretty rural)
2. I'm concerned about virus protection. My dad's PC is completely infected with viruses. Even though he'll be purchasing a new one in the next few months, I'm concerned that they may infiltrate my computer. I have Virex and I've had no problems whatsoever with viruses (or is it virii), but I want to continue with that clean record. I saw there are some modems with firewall built in. Does that make a difference?
3. Verizon let me keep their DSL modem with inputs for 4 ethernet cables (the built-in router I suppose). Is there any way I can use this as a router for the cable service? I apologize for this question, but if I can find a use for this modem, I'd like to (and DSL is not available in this area).
Thanks a lot. Happy New Year!
~Jeremy

Jeremy, First welcome to the discussions,
Wireless technology is just a few mbs slower than a wired connection, for the most part you won't notice it.
Cabble is different than DSL. With cable you will get better more consistant speeds than you will with DSL.
Normally DSL is furnished through phone lines and the farther you are from the ISP's Servers the slower your connection is. This is not the case with Cable.
You are correct about Viruses. Mac is not to date affected by viruses Trojans and Malware. It is a good idea if for no other reason than peace of mind to have Virex or
http://www.clamxav.com/
All ISp's have firewalls on there servers, as well as any Router you buy will have a Firewall that is normally configured by typing in 192.168.1.1 in your Browser this will open the Routers Utility settings. This information is with any Routers Paperwork.
Mac OSX has one of the best firewalls you can also set up.
Normally almost all Viruses are sent through e-mail while they won't affect the UNIX operating system when you get an e-mail with a virus you can pass it on to another windows user who can be infected.
If you have the adapter that plugs in to the socket that accepts the Cable in and the Cat5 or Cat6 out then yes you can use it, you will need the Ip Address that your service provides. If your serviceuses Cat 5 or 6 Eternet Cable the technology is the same worldwide. It really depends on what your cable service has furnished you with.
You should be able to run an ethernet cable from your Internet Service Providers Modem ( Instead of plugging it in to your computer) Plug it into the Uplink port of the Verizon Router and try it. Like I said you may have to get into the Utility and set the Ip for you to do away with the other one, you should only need one.
It would however be the hot set up if you can use the Modem Router Combined.
There is also a good chance if they haven't hooked you up yet show the tech that comes to hook you up the Modem Router you have and if he can he will probably use it if you talk real nice.
Remember for the most part a Modem is a Modem, and a Router is a Router. Some have a few different features but the technology is the same and works under the same principles.
This should help. Don

Are Barcodes supported better in Adobe solution than Smartforms/SapScript

Similar Messages

Maybe you are looking for