Are bigger tables possible to use now?

I wonder if Number '09 can now open an excel document with 10000 rows in it and scroll without problem (just like in Excel)? –If that works I probably will stop using Excel, but I find I still need to use Excel because it takes too long time doing the same things in Numbers (I do not do any calculations (nearly) -- only catalogue listings/data. /Jerry
Message was edited by: eyeless
Message was edited by: eyeless

I just installed Numbers '09, and using a spreadsheet that originated on Excel, and one that originated on Numbers '08 (with around 6700 rows each) - I found that the speed in which I could scroll - and more importantly the speed in which I can use the "command F" function to find line items is incredibly slow. Since there are no real functions in this spreadsheet (short of occasional sums, and each line item having an a-b=c, where the a and b are entered, it should be an easy job - and it is in Excel. As an example, if you have 5000 lines - and let's say your box cursor is sitting on line 2500. If you try to find something on line 3700 - it's quick and easy. If you try and find something on line 1800 it takes almost 2 minutes. The only solution is to search in reverse mode. (Apparently, it goes down to the end, then works it's way back from line 1). If you don't know where the item is, relative to where you are in the spreadsheet, you are doomed 50% of the time. When I installed Work '09, I thought it would be an improvement - but it's even worse. Now when you do a Command F (regardless of it's location on the spreadsheet) it searches the ENTIRE spreadsheet, and gives you the results of your search in a smaller window. You then have to press that search result item again, to move your box cursor to the appropriate cell. So - my recommendation would be to remain with Excel - I'm sad to say.

Similar Messages

What are the tables to be used for these reports

hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.

Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps

Why are shapes so difficult to use now?

I cant see a single way shapes in CC are better. All extra stages and annoyances, anyone have better workflow method to combat these new things?
1. Cant duplicate easily.
Before: select layer, cmd + j = duplicated
Now: select layer, cmd + j = blank layer, nothing.
Solution, select the pen, select the shape, select the layer, NOW duplicate.
Am I doing it wrong? Because before you could just duplicate, now you have to have the shape selected and the layer. This is very frustrating adding extra clicking/selection to my workflow.
If you right click a shape and duplicate, it works. So the shortcut of duplicate doesnt work the same?
2. Pen Points are infuritating.
Before: drag a box out to select multiple points on a shape.
Now: drag a box out, selects every point in the entire document on every layer. How is this better than before?
Solution, none really? If there is one I take it, its an extra click.
3. A shape remembers the last point you click. Great so now everytime I click a shape I have to deselect that point, and usually try to do that using a drag box, which doesnt work.
I just dont see how any extra workflow helps bring anything good to photoshop. What are the benefits to this new system?

I have bought a Ipad 4 a week ago and find it is like wading though treacle to get my data loaded! Itunes seems very unintuitive and difficult to use. I managed to transfer my music and films over from my PC and started using them on the Ipad when suddenley they dissappeared! "No Content" so I had to go back and reload them all again. I still have not found a way to transfer and use my documents onto the Ipad. I have an Android tablet and that is so simple to use(and a liot less expensive to buy). Why can't I access the file system on the Ipad, this seems to be the heart of my problems. I am not inexeperienced with computers as I am a retired Computer Manager/Analyst/[programmer over 20 years.

What are the tables to be used in a material cost estimate report????

Hi..
i am creating a product costing report...(similar to ck11n n ck13n)
it has two selection screen parameters( matnr and plant)...
i need to display
1. cost center
2.total hours per cost center
3.total labor per cost center
4.total overhead per cos center
How do i proceed??
where do i fetch the data from??
how do i do all the calculations???
plz help me..

Hi
Use the tables
COST
COSP
COEP
AFVV (activity)
Reward points if useful
Regards
Anji

Is this possible to use no default security realm?

Hi,
I created new security ReadOnlySQLAuthentication provider in the default realm and it works. Now I have all the users from all applications in one realm. If they use the same enterprise roles, user can log to one application with login and password from another application. To prevent it I created another security realm. I've added ReadOnlySQLAuthentication provider, set in my application new realm name - in jazn-data.xml and web.xml. But it doesn't work. My questions are:
It is possible to use few realms? So one application will use default realm, another no default realm.
If so, how to bind an application to no default realm?
Bart

Hi,
A WLS instance only supports a single realm. So the answer unfortunately is no (was different with OC4J)
Frank

Sorry I can't create my account in my App store, because i am not in that region. I live in Cambodia. Can u fix it as soon as possible? Now there are many citizen in Cambodia use a lot if Apple products.

Sorry I can't create my account in my App store, because i am not in that region. I live in Cambodia. Can u fix it as soon as possible? Now there are many citizen in Cambodia use a lot if Apple products.

Go to http://www.apple.com/asia/support/mac/app-store/ , click on 'iTunes Store Account and Billing' then 'Billing Enquiries' to get a link to email them. Ask them whether there is a way you can purchase Apps, perhaps by nominating one of the listed countries (Vietnam, for example).

Is it possible to use a case statement when joining different tables based on input parameters?

Hi,
I have a scenario where my stored procedure takes 5 parameters and the users can pass NULL or some value to these parameters and based on the parameters, I need to pull data from various tables.
Is it possible to use a case statement in the join, similar the one in the below example. I'm getting error when I use the below type of statement.
select a.*
from a
case
when parameter1=1 then
inner join a on a.id = b.id
when parameter1=2 then
inner join a on a.id = c.id
end;
Please let me know, if this type of statement works, and if it works will it create any performance issues?. If the above doesn't work, could you please give me some alternate solutions?
Thanks.

Here's a technique for joining A to B or C depending on the input parameters. In theory, you are joining to both tables but the execution plan includes filters to skip whichever join is not appropriate. The drawback is that you have to do outer joins, not inner ones.
CREATE TABLE A AS SELECT LEVEL ak FROM dual CONNECT BY LEVEL <= 100;
CREATE TABLE b AS SELECT ak, bk
FROM A, (SELECT LEVEL bk FROM dual CONNECT BY LEVEL <= 10);
CREATE TABLE c(ak, ck) AS SELECT ak, bk*10 FROM b;
variable p1 NUMBER;
variable p2 NUMBER;
exec :p1 := 1;
exec :p2 := 20;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
| Id | Operation             | Name            | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | SELECT STATEMENT      |                 |      1 |        |      9 |00:00:00.01 |       7 |
|* 1 | HASH JOIN OUTER      |                 |      1 |      9 |      9 |00:00:00.01 |       7 |
|* 2 |   HASH JOIN OUTER     |                 |      1 |      9 |      9 |00:00:00.01 |       7 |
|* 3 |    TABLE ACCESS FULL | A               |      1 |      9 |      9 |00:00:00.01 |       3 |
|   4 |    VIEW               | VW_DCL_5532A50F |      1 |      9 |      9 |00:00:00.01 |       4 |
|* 5 |     FILTER            |                 |      1 |        |      9 |00:00:00.01 |       4 |
|* 6 |      TABLE ACCESS FULL| B               |      1 |      9 |      9 |00:00:00.01 |       4 |
|   7 |   VIEW                | VW_DCL_5532A50F |      1 |      9 |      0 |00:00:00.01 |       0 |
|* 8 |    FILTER             |                 |      1 |        |      0 |00:00:00.01 |       0 |
|* 9 |     TABLE ACCESS FULL | C               |      0 |      9 |      0 |00:00:00.01 |       0 |
Predicate Information (identified by operation id):
   1 - access("A"."AK"="ITEM_0")
   2 - access("A"."AK"="ITEM_1")
   3 - filter("A"."AK"<=9)
5 - filter(:P1 IS NOT NULL)
   6 - filter(("B"."AK"<=9 AND "B"."BK"=:P1))
   8 - filter((:P2 IS NOT NULL AND :P1 IS NULL))
   9 - filter(("C"."AK"<=9 AND "C"."CK"=:P2))
You can see that table C was not really accessed: the buffer count is 0.
exec :p1 := NULL;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
Now table B is not accessed.
| Id | Operation             | Name            | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads |
|   0 | SELECT STATEMENT      |                 |      1 |        |      9 |00:00:00.02 |       7 |      2 |
|* 1 | HASH JOIN OUTER      |                 |      1 |      9 |      9 |00:00:00.02 |       7 |      2 |
|* 2 |   HASH JOIN OUTER     |                 |      1 |      9 |      9 |00:00:00.01 |       3 |      0 |
|* 3 |    TABLE ACCESS FULL | A               |      1 |      9 |      9 |00:00:00.01 |       3 |      0 |
|   4 |    VIEW               | VW_DCL_5532A50F |      1 |      9 |      0 |00:00:00.01 |       0 |      0 |
|* 5 |     FILTER            |                 |      1 |        |      0 |00:00:00.01 |       0 |      0 |
|* 6 |      TABLE ACCESS FULL| B               |      0 |      9 |      0 |00:00:00.01 |       0 |      0 |
|   7 |   VIEW                | VW_DCL_5532A50F |      1 |      9 |      9 |00:00:00.01 |       4 |      2 |
|* 8 |    FILTER             |                 |      1 |        |      9 |00:00:00.01 |       4 |      2 |
|* 9 |     TABLE ACCESS FULL | C               |      1 |      9 |      9 |00:00:00.01 |       4 |      2 |

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network?

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network? I use the files on the Local Area Network on my windows computer by typing in the I.P address in the library. Kindly guide me how i can use these files stored over the Local Area Network.

I disabled GateKeeper's automatic blocking of unrecognised developers, and so I was able to install the driver.
The Mobile Connect program is now installed, but the computer still does not recognise the modem.
I also borrowed a USB hub from a friend and it didn't make a difference.

I got CS6 Design & Web Premium on my mac, but now i also want it on my new macbook is it possible to use it also on my macbook? thanks!

I got CS6 Design & Web Premium on my mac, but now i also want it on my new macbook is it possible to use it also on my macbook? thanks!

yes, all adobe single user licenses allow up to two concurrent installations and activations. if you need the installation file:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Is it possible to use u2018CALL TRANSACTIONu2019 without a BDC table ?

HIIIIIIIIIIII
Is it possible to use u2018CALL TRANSACTIONu2019 without a BDC table ?
THANKS

Hi,
Yes you can,
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN] .
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
Regards
Jana

I would like to delete all Apps archived in the clouds of "purchased" and not in used now and in the future. How is possible to remove definitively these Apps?

I would like to delete all Apps archived in the clouds of "purchased" and not in used now and in the future. How is possible to remove definitively these Apps. Thank you

All you can do is hide them from your purchased list. You cannot permaneently delete anything from your purchased history.
Also, these are not stored in your iCloud account storage space. The purchases reside in the online store and all you see is a list of those purchases made with your account, with a cloud-link to redownload them, but you are merely re-downloading them directly from the store.

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

HT204053 My husband and I are divorcing and we have used his apple ID for our 2 apple tv's. He changed his password and now I no longer have access to the 300 or more movies, tv shows and music. He keeps saying that there is no way for us both to have

My husband and I are divorcing and we have used his apple ID for our 2 apple tv's. He changed his password and now I no longer have access to the 300 or more movies, tv shows and music. He keeps telling me that , there is no way for us both to have it. So, since his Apple ID was the one programmed into our Apple TV's he has custody to everything. I know there has to be a solution for this, because I can't be the be the only person this has ever happened too!

Unfortunately the situation is thus...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37
I know it doesn't help you in your current situation... but you can leave Feedback for Apple here...
http://www.apple.com/feedback/

I updated to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back?

i updated from PS CC to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back? I can no longer navigate to the NIK collection, my Topaz plug-ins, etc. They still are accessible on LR, but they don't seem to now be accessible on PS CC 2014

For Topaz, cop the shortcuts from Program Files\Adobe\Adobe Photshop CC\plug-ins to the same folder in Photoshop CC 2014
I don't know about Nik
BTW What sort of pictures does a 'Photographic Psycho' take?

Are bigger tables possible to use now?

Similar Messages

Maybe you are looking for