Are blog entries searchable?

We have recently deployed SP2013 corporate wide and some employees have started blogging. Some of the information they are putting out there are very helpful tips and tricks. However, I do not see any blog posts in the search results. I have to think these
posts can be search results. I have tried to search the Internet, but it seems that because I am using the word blog the only results I am getting back are blog posts about searching. Can anyone point me in the right direction?
Thank you!

Yes blog is very much searchable may be they are not ranked top. Please look at below link where you can create a separate BLOG search scope so that user can only search blog.
SharePoint
2010 Search: Show up all blog entries from different sites at one place
In another way, you can use a search result webpart to show all blog post which will be displayed from search.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Similar Messages

In iWeb, blog entries are not appearing

in iWeb, am entering blog entries which are appearing in the blog archive but showing up as an entry for people to see. Any suggestions?

Do you mean 'appearing in the blog archive but not showing up as an entry for people to see' ?
By default iWeb limits the number of entries in a blog feed to 5; it then moves older episodes to the archive page (and out of the feed) as new entries are made. You can increase this number to 50 in the RSS section of the Inspector.
New entries should not be appearing in the Archive, though if you were giving them older dates then they presumably would.
Posting the URL of your blog might aid in finding a solution.

Blog entries are broken with latest iWeb update

I received an update to iWeb within the past couple days, apparently related to the changes for MobileMe. Now the publish command is "Publish to MobileMe".
I published new blog entries since the program update. Now all the links to the blog entries are shown as $link$ and none of them work.
I cannot find how to send an email to Apple Support about this. The MobileMe support page shows Chat which is not active and pointers to all kinds of sources except a source that will allow me to communicate the problem directly to Apple in a simple way.
Does anyone know what is going on? This MobileMe transition is nothing but problems for me so far when I am just trying to use the same stuff in iWeb that I've been using fine for a long time.

Thank you very much for your post.
Good news: Publish All solved the problem.
Bad news: This is clearly a case where basic testing was sorely lacking and the new service was rushed out. The solution is draconian and not really acceptable for large amounts of content.
I had thought about doing Publish All but knew it would take probably a couple hours to complete for the multiple gigabytes of content that I had. After I saw the post then I started the Publish All before I went to bed. I check in the morning and it had worked.

Blog Summary Page: Pictures in blog entries are gone

All of my blog entries on the blog summary page no longer display images set inside the text of an entry. Is this an iWeb 2.0 bug or "feature"?
This is annoying, because with iWeb 1 I was able to share these pictures in my blog summary page and RSS feed. Now my blog and RSS readers have to click the "read more" link to see any pictures, even though I have set my blog summary length to the total entry.
This is a serious loss of feature for no good reason, and I hope this is considered a bug and will be fixed soon.

I was just getting ready to post a similar question when I ran across yours. I've been using Rapid Weaver for my blog and was thinking about switching over to iWeb, but until the pictures start showing up on the summary page (inside the text of an entry), iWeb is utterly non-functional for my purposes.
The other thing I noticed is that none of the formatting (like bold or italics text) shows up inside the text of an entry on the summary page either.
I, too, am very interested in whether this is a "bug" or a "feature."

My iWeb Blog entries are not showing on MobileMe. Help!

When I click on the link from the Blog Summaries to one one my Blog Entries I get a 'Not Found' page - all published to MobileMe with the latest iWeb. These llinks have always worked before. The problem has been apparent for two days now. What can or will be done to correct this?

Does your blog have comments by visitors? If not you can move your blog to a new server and only lose the ability to search the blog. But if you have visitor comments included in your blog you will lose those comments when moving to a new server.
If you do have visitor comments post back and I'll give links to a method that can be used to convert your blog w/comments to a WordPress blog.
Also, this may be of interest to you: Life After MobileMe.
OT

How to delete a blog entry in Lion Server Wiki?

Anyone know how to do this? It seems that even logged in as system administrator you cannot delete blog entries using the web interface.
Wiki help unhelpfully reports that "If Delete Page or Delete File isn't listed, you can't delete the page or file.". Really?
Thanks in advance for any help avail.

The above works most of the time, but sometimes User accounts can be stubborn. I setup an admin account, perhaps unecessarily, when installing lion on a new solid state hard drive. After migrating my original Admin account over from the hard drive I had difficulty in removing the newly created Admin (method: I clicked the minus and deleted the home folder, checking 'erase home folder securely') which resulted in the acct. being downgraded to Standard. Still it would show up at startup login screen. Although logging in to this account (to attempt to logout and then reattempt the delete) was not possible (never ending spinning beachball - not what you want with 20G RAM and a top end SSD).
Then I found this -
http://reviews.cnet.com/8301-13727_7-57326230-263/remove-stubborn-user-accounts- with-directory-utility/
- which could be helpful if you are having similar problems with user accounts in Lion.

Help, my new Blog entries, since iLife '08 upgrade, don't show ANY text!

Ever since upgrading to iLife '08, my new Blog entries do not show any of the text once it is uploaded to the server. In fact, all of my recent Blog entries now have all thier text gone when viewed online. Only Blog pages in "Archives" are still normal. What gives?! They all look good in iWeb, but not live. Thanks for your help. Wayne
[email protected]

Hi Cedric. I went ahead and took down all recent changes to my site, and then just re-uploaded my last good set-up from iLife 2006. I think iLife 2008 changes how blog pages are addressed. As an example, my two most recent good entries show on the web as:
http://waynelhenderson.com/Blog/693901ED-99E6-42D3-8AA9-7F8338989B47.html
http://waynelhenderson.com/Blog/629035FF-E021-4B9D-AFE5-D091583E0676.html
Notice the long string of numbers, letters, and dashes, after the word /Blog/? My iWeb in iLife 2008 no longer puts those types of strings at the end of /Blog/. Instead, the Blog web entries show as:
http://waynelhenderson.com/Blog/Entries/2007/10/26Tuning_In_With_Wayne_Henderson_podcast_39_%26_40%2C_by_Wayne_Henderson_Voice-ove rs(206)984-1446iPhone_GreenpeacePackers!.html (before I took it down because it wasn't working right).
Could the fact that instead of the string of number, letters, and dashes after /Blog/, my iLife '08 uses "/Blog/Entries/2007/10/26_Tu....etc" have anything to do with my problem of text not showing?
I've always used the same fonts, sizes, and colors. But now it's not working. What is weird, however, is that if I did Select All, and Copy and Paste the web page contents onto Notepad...the text IS THERE...just not showing on the web.
Argh!
Wayne

Publishing One Blog Entry At a Time

I am going to use my website and blog page for a class I am going to teach, and I will use my blog page to assign journal assignments. I would like to do some of these in advance, but I only want to publish one entry at a time. Does that make sense? Can I do such a thing?
Thanks!

I don't think you can selectively withhold the publication of blog entries — once they're created, they're all published next time you publish.
Problems with iWeb's blog are a recurring theme on these forums and it's advisable not to use it for important projects — or perhaps for anything! ...For a success story with a non-iWeb blog hosted on WordPress, see this old thread:
To blog or not to blog
And to link to an external blog from iWeb's navbar:
Create a blank internal page titled "Blog" (Actually you can name the page whatever you want.) Then in that Blog page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://www.yourblogname.com"; // change this to your own URL
</script>
...Once published, clicking on "Blog" in the navbar will immediately redirect to your external Blog page. (Thanks to Cyclosaurus for the code).
Since teaching often involves "social networking", you may find web-based Ning provides some useful functionality:
http://about.ning.com/product.php

Restrictions on the size of blog entry

When I publish a blog entry 200 words about it is appeared properly. But if I write a great article, I see only a blank space on the blog page. But on the front page of the blog in summary form, everything is fine. Does anyone know what is the problem.

James Christopher wrote:
is their any restrictions on the size of the internal Hard drive
mac book G4 12in.
You might take a look at your System Profiler description of the machine. Select "About this Mac" from the Apple menu, then click the "More Info" button (at least that's what is says in Tiger). Or you can just launch System Profiler from the Utilities folder.
In either event, you will open to a Hardware Overview like this (except yours will be for the laptop)
Hardware Overview:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,2
CPU Type:          PowerPC 970 (2.2)
Number Of CPUs:          2
CPU Speed:          2 GHz
L2 Cache (per CPU):          512 KB
Memory:          5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.1.4f0
(Note, if you post, do not post your machine's serial number, which will be in the display.)
That being said, my TiBook from 2003 now has a 160G Hitachi Travelstar in it, which was the largest IDE little drive I could get at the time. If your machine is in that time frame or newer, you can put in pretty much anything they make now. Of course, if it is truly a MacBook, then the SATA laptop drives are getting very big.
You can get some more information at this OWC link which will allow you to see how big an IDE drive you can put into a G5 PowerBook.

Photo problems in blog entries...

I am having problems with photos and images displaying in blog entries. I am able to place photos in the text of my blog entries but upon publishing some will display and some won't (in any web browser or system used).
I have tried emptying Safari caches and reloading pages but to no avail. Some photos are still missing (they are displaying as a small question mark when viewed online).
What's worse is that reinserting the photos in iWeb and then republishing will make some of the missing photos appear on my site while others that were displaying okay previously will now be gone.
The result is that many of my blog entries are always missing photos.
Examples of this can be seen by clicking to view the various entries here:
http://web.mac.com/jtbcmac/iWeb/MaiTai/MontrealTiki/Archive.html
and here:
http://web.mac.com/jtbcmac/iWeb/MaiTai/OtherArticles/Archive.html
I am currently trying to reload things, so pages may or may not look ok when you view them.
Powerbook G4 Mac OS X (10.4.4)
Mac OS X (10.4.4)

UPDATE:
All seems to be fine now... after making minor changes on each of the affected pages and republishing a couple of times.
But I have a feeling the problem will re-occur... as it has in the past... when I make a new blog entry.

Lost iWeb '09 Blog Entries

I kept a number of blogs pertaining to my pregnancy and several other topics. A few months ago, I moved the blogs from my main site and created a new site I called Archive. My plan was to publish these to a folder for backup purposes, but the publish always fails.
My larger problem is that now, the blog entries seem to be...not gone, exactly, but I can't see them. On two, the main blog page shows up, and when I click on Entries, I can see the list of my entries and their titles, but I can't scroll through them (list snaps back if I release the mouse button). I can't click on them either. One blog works just fine. One shows the main splash page, but shows only the background of the Entries page.
iWeb won't let me move these out of my Archive site. I have been unable to publish them to MobileMe or to a folder. I've tried deleting plists, etc. but nothing works. Restoring from backup messes up my current sites.
Help, please. I'd like to not lose these. Are these files alive somewhere?

The entries are kept on the MobileMe server I believe and are linked to your main site. If you can move those blog sites back into your main site you might be able to get the entires back. No guarantee however.
OT

Photos in text of blog entry do not port to main blog page

I have posted before about the photos from my entry page disappearing when ported to my main blog page. I have yet to find a solution so I'm asking for help again.
I'm am trapped using iWeb 1.1 until I find a solution. I use the Modern Template with modifications. Usually I delete the snowboarding surfer placeholder. Please note I'm not concerned that this photo doesn't port. I don't want it to. I do however need the photos that I have embedded via text wrap within my blog entry to port to the main blog page. They do not.
I have tried keeping the snowboarder place holder and redoing entries with wrapped text, but my additional photos are still missing. I have checked the box in iWeb 2 that says show photos. My layouts conveted to iWeb 2 look perfect on the entry's page, and horrible with missing photos on the summary page.
This problem is beyond frustrating. My blog can be seen here, however it is still the iWeb 1.1 format.
http://web.mac.com/knittsings/iWeb/knittsings/knittsings/knittsings.html
As you can see, almost all my entries have numerous photos. I want them to display on the main blog page.
Am I missing something very basic? I have seen others with this same question but no one seems to have had any luck resolving this problem.
Thanks,
Kathryn

And that's the way it should be.
If you look at this page about navigation you'll see that the main navigation uses eternal links and the sub navigation internal ones....
http://www.iwebformusicians.com/WebMusic/Navigation.html
Try the troubleshooting steps under "Fix iWeb" here.....
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Issue with Blog entry length

Okay, so i create a blog with pictures that are very long (several pictures made into one in photoshop). When i'm editing the blog entry in iWeb, everything looks fine. When i view it in the browser the page cuts off half way and moves the next and previous buttons up to where it cuts off. In iWeb i set the page length to be 4000pixels, which is more than enough...but it doesn't show up that way in the browser.
My solution right now is to open the html file in dreamweaver and change the length pixels to 3000, which works fine. The problem is that anytime i do work in iWeb, it'll automatically save it back to it's version...so i'd have to change every blog entry every time i do anything to the website! WHAT A PAIN!!!
Anyone else had this problem? Is there a solution? Is Apple listening? FIX THE BUGS!

This seems totally illogical to me, because if the picture is in the body, the footer should come after the body. I should have to extend a footer to have an entire picture in the body show up.
Either way, i obviously did it (because all your other advice is accurate), and of course it works....sort of.
Okay, so now i CAN see the entire picture, however, Next and Previous still show up mid way through the picture. yet in the editor they are under the picture. SO, i thought i'd just drag them down a ways and sort of gage how much extra space is needed. So in the editor there would be a huge gap under the picture before these arrows show up. Unfortunately, this didn't work, the next and previous buttons still who up mid way over the picture. GAH?
Is there a fix for this? I haven't really bothered playing around with it, 'cause i spent soo much time last night trying to figure out why adding another blank page caused all my other pages to alter.
Thanks for your help on all my issues Ethmoid!

Linking to Adobe PDF on blog entry crashing iWeb

Help! I have been using iWeb to create a website and blog. In a recent blog entry, i linked to an Adobe PDF file on my computer. The link was functioning and working fine, and then I saved the entry and iWeb crashed. I managed to open it back up by sending photos from iPhoto to iWeb. The other pages of the website work fine, and other blog posts also work fine. I tried publishing and the site published. However, in both iWeb and online, the blog post with the linked PDF is now just blank. The PDF works fine on its own and is not corrupted.
I have tried editing the post as well as deleting it in iWeb, but every time I click either button iWeb crashes and gives me an error message. I cannot duplicate the blog post either. This would somehow be okay, but I cannot add a new blog entry in iWeb either (it crashes). other pages are unaffected. I have not attempted deleting the entire blog portion of the website yet. Is there anything I can do to get rid of the malfunctioning blog post besides deleting the whole website and starting from scratch? Bear in mind the back-up of the Domain I saved was after I saved the blog post. Is there a 3rd party app that I can open my Domain in to manually remove the blog entry, or someway to access the code to delete the data that way?

This JUST happened to me as well after linking to a PDF file but now I can't get iWeb to load up, well, it opens and I can see the inspector pane but that is all...the main window is not there and I can't seem to figure out how to get it.
I also noticed a bunch of iWeb stuff in the trash now in a "recovered files" folder.
Any ideas?

IWeb losing, and then corrupting photos in Blog entries

I have an odd problem, and really need some help!
I've been posting blog entries with pictures at the end of the text for many months now (over 150 entries), and only recently have run across this problem. After creating a new blog entry, I post the site, and after the site is published, will go to the site and see that the picture in the blog index is fine, but when anyone visits the page of that blog entry, the pictures at the end of the text are gone, and the picture at the start of the blog has a box with an X in it. When I go back into iWeb, the file will either be fine, or will have the X and all of my past posts will have it as well. When I try to re-drag the picture in, it is saying the picture is corrupt. Yet somehow, the next day on the web, the pictures magically appear and all seems fine (after trying to republish several times). This has happened for the past week or so, but seems to be worse as of late.
I don't know if this is because of occassional connection outages (which seem to happen fairly often) and pictures not completely loading, even though iWeb thinks they are, or if this is from problems on the .mac servers, or problems on my computer with iWeb. I've tried quitting and rebooting, which worked the first time or two that this happened, but no longer helps.
It's one thing if iWeb is not working correctly, but if this is now corrupting my photos in iPhoto, this is a serious defect! Apple, PLEASE make the next version more stable - we're I just getting started and seeing this, I would have dumped iWeb, but after 4 months and many many entries, it is not easy to move this to a TypePad or other site.
iMac 24" Mac OS X (10.4.8) MacBook Pro, 5.5G iPod Video, G4 Titanium Powerbook

I'm having this same problem. Is this a known bug?
On my iWeb site, the pictures in my blog keeping getting "corrupted" and are unusable, and the only way I can get iWeb to accet them again is to export them from iPhoto, do a save-as, and re-import them into iPhoto.
Please tell me there is some sort of fix.

Are blog entries searchable?

Similar Messages

Maybe you are looking for