Are both "OpenMQ" and "Open Message Queue" correct names for it?

Hello,
should I use "OpenMQ" in the product name for a client library for OpenMQ (like 'MyLibraryName OpenMQ Client'), or is it recommended to use the name "Open Message Queue" for some reasons (so it would be 'MyLibraryName Open Message Queue Client"? I am not sure if OpenMQ is an "official" name for it, which I should use to refer to.
It is a Delphi library, the first public release will be ready real soon.
Best Regards,
Michael Justin

Many thanks for your answer! The library is targeted at Delphi developers, so maybe I will give it a short name and a long name, "MyLibraryName OpenMQ Client" and "MyLibraryName OpenMQ Client for Open Message Queue" for announcements and other places where it should be clear what MQ stands for.
Best Regards
Michael Justin

Similar Messages

  • Bought mlbtv thru itunes. try to access mlbtv and get message that user name or password incorrect. both were correct but created new password anyway. got same message--password or user incorrect.

    Bought mlbtv through itunes. Tried to access mlbtv and got message that user name or password not recognized. They were both correct. Created new password and user name anyway. Still not recognized.

    Are you using the MLB.com At Bat app for iPhone/iPad?
    -> https://itunes.apple.com/us/app/mlb.com-at-bat/id493619333?mt=8&ign-mpt=uo%3D4

  • Every time I ask Siri to find something near me, she says that she cannot find my location, and to turn on my location settings and siri settings. These are both on and after rebooting it still doesn't work. How do I fix this?

    Every time I ask Siri to find something near me, she says that she cannot find my location because I need to turn on location services in the settings menu and in siri. These are both on, and after rebooting my phone it still doesn't work correctly. How do I fix this?

    No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
    What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod.

  • Any GPUs for Windows that support both CUDA and Open CL?

    Hi everyone,
    I was looking at this list:  http://www.adobe.com/products/premiere/tech-specs.html
    while trying to decide which graphics card to buy to take advantage of Mercury playback.  I couldn't help but notice that there is not a single card listed that is compatible for both CUDA and Open CL in windows.  Do I really have to pick one or the other?  In that case, which would be more beneficial to a Premiere Pro workflow that utilizes a lot of dynamic links to After Effects?  As a side note, I use Photoshop a ton, and would love to keep my GPU acceleration in that arena as well.
    Thanks!
    -Charlie

    I believe they write OpenCL separately.  They're two different APIs.
    They are not that different, while 'porting' doesn't imply completely automatic process. Rewriting existing libraries from one language to another is something almost any developer is familiar with.
    I'm not sure I understand the point you're trying to make here.  Right now, you cannot use OpenCL processing with an nVidia card on Windows.
    The point is simple: both CUDA and OpenCL are supported by NVIDIA cards. The fact that Adobe engineers haven't ported libraries for GPU acceleration in MPE on Windows from CUDA to OpenCL so far doesn't mean they never will. Hence the statement that a user-side choice between AMD and NVIDIA equals to choice between OpenCL and CUDA is incorrect.

  • Why are both SQL_ID and PREV_SQL_ID null?

    session A is blocking session B.
    it was row-level lock.
    But, why are both SQL_ID and PREV_SQL_ID null in session A?

    Well, what do we know?
    Session A must have an uncommitted transaction.
    That uncommitted transaction is blocking session B.
    But session A could well be doing nothing now, could be churning away doing some sort of processing outside of the database (java client you said), might well be off doing something elsewhere in a distributed transaction.
    Who knows?
    Not necessarily the database.
    If you have ASH licensed, you might, might get a better picture of what session A was doing by looking at DBA_HIST_ACTIVE_SESS_HISTORY but as this is sampled data and your statements might fly in and out, it might not be helpful.
    Note that even if prev_sql_id or sql_id were populated, these might not be the statements responsible for the lock.

  • I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
    If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • I have text documents in my email folders which I can't open.They are PDF files and Open Office files.How do I open these documents or type additional text documents?

    I have text documents in my email folders which I can't open. They are PDF files and Open Office documents. How do I open these documents?

    These are the "out of the box" file formats that you can view on the iPad as mail attachments. If the file is not listed here, you cannot view it without a compatible third party app. What is the file extension?
    Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)

  • My files are all there and open in Preview but in Numbers they come up blank. Same in Pages. Any ideas please? My Mac was stopped suddenly by a power cut. Could this be relevant? Help please. Jon Sims

    My files are all there and open in Preview but in Numbers they come up blank. Same in Pages. Any ideas please? My Mac was stopped suddenly by a power cut. Could this be relevant? Help please. Jon Sims

    "My Mac was stopped suddenly by a power cut. Could this be relevant?"
    Sounds very relevant.
    Do you have access to another computer with Numbers installed?
    If so, do your files open properly on that computer?
    If so, then the problem is your computer itself, which is best posted in a different forum.

  • What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

    What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

    Thank-you for clarifying third party and for pointing out the potential problems.
    i will either have my phone unlocked by the carrier or get my phone service from them. switching carriers is not essential.
    Thanks agin.
    Cheers!

  • Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    4. Reset the System Management Controller.
    5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • How can I convert a .pdf to a .ppt (The .pdf are both letters and pictures)

    How can I convert a .pdf to a .ppt (The .pdf are both letters and pictures)

    Hi,
    To export your PDF files to PPTX files:
    Using Web UI:
    Log into https://exportpdf.acrobat.com/signin.html with your Adobe ID and password
    Select “Export from PDF”
    Click “Select Files” button then choose your PDF file
    Select the format from the list below (PPTX)
    Check ON “Recognized text in” if your PDF file is scanned images to recognize the image to text
    Click “Export” button
    Click “Download” button in the progress bar after completion of exporting to download the file to your computer.
    Note:The exported PPT files are stored at https://files.acrobat.com.  You will see the file in file list and clicking "FILES" at top of the screen will redirect you to https://files.acrobat.com site .
    Hisami

  • HT2472 I must have done something inadvertently and now if I have more than one application open the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

    I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

    Hi Jan, Almost sounds like Expose or Spaces....
    http://support.apple.com/kb/HT2503

  • Gracenote CDDB service not submitting correct names for songs when importing from CDs

    Gracenote CDDB service not submitting correct names for songs from purchased CDs

    You are looking at the 1st Gen Nano manual.
    You need to look at the 2nd Gen Nano manual here -> iPod Nano Features Guide
    Not much difference but that page 16 shows iTunes 6. You have iTunes 7.
    You have to first select the CD.
    The Import button is now at the bottom right.
    Insert the CD and select it in iTunes and the Browse icon (eye) at the bottom right will change to Import.
    Go to iTunes prefs -> Advanced and tick "Automatically get CD track names from Internet".

  • When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online.  Do you still want to import the songs?"   This has happened for four CD's in a row now, Eagles - Hotel California.

    Hi All,
    When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online.  Do you still want to import the songs?"   This has happened for four CD's in a row now.  Today, after importing some other CD's in the regular way, all of a sudden, iTunes won't recognize the Eagles - "Hotel California" CD, the Eagles "**** Freezes Over" CD,  "The Best of Roy Orbison" or "Milestones" by Miles Davis.
    What happened?  Anybody know?

    We've gotten the same error at the same time. I guess we need to let this play out. In the meantime, I'm gonna update iTunes.

  • HT1766 I turned off my contacts on my email and it erased all my names for some reason

    I turned off my contacts on my email and it erased all my names for some reason

    Why did you turn them off? Turn them back on.

Maybe you are looking for

  • When i try to upgrade iPad, i cannot proceed with terms and conditions page

    i forgot my apple ID password when i after i upgrade my ipad. So i changed reset my password online. After i entered new password, terms and conditions page appeared, however there was no response no matter what option i choose be it agree, disagree

  • How can i now the number of rows afected by the last query?

    how can i now the number of rows afected by the last query? For example: i made this update : update trl_trial set status = 1 /* Validation */ where trial_id = cobject_id and status = 0; /* Initial */ if NUMBERS_OF_ROWS = 0 then end if; how can i do

  • Bulk collect- forall- Lock

    Hi, I have been using bulk collect with Forall for insert into a partition table which has uniquw constraing on 2 columns but the partition table is aquiring lock every time I ran the procedure and it doesn't get killed even though session is killed.

  • Why we does not have List.contains(E o) List.remove(E o)

    List class is having bool contains(Object o) bool remove(Object o) I was wondering why the List class doesn't have bool contains(Object o) bool remove(Object o) Isn't user will not protected by compiler if they try to do some wrong stuff? List<String

  • Workcenter ID page not coming

    Hello Gurus, We have CTI integration with our SAP IC application. Bucher and Suter is the service provider. When we login to SAP IC, we have work center ID to be entered by the Agent which establishes connections to the communication management servi