Are calls to another EE customer exempt from the plan? On T Mobile they were.

 On my T mobile plan, all calls to other T mobile users were exempt from my allowance. Is this still the case on EE?

Calls to other EE custs are just the same as to any other mobile and come out your allowance.

Similar Messages

  • My firefox had customized buttons on the top. when I upgraded they were gone. How do I get them back?

    I had buttons for foxnews, driving directions, gmail, etc.
    Also, my firefox opened to gmail before upgrading.

    Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.<br />
    If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" and check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • How to call & pass values to custom page from seeded page table region

    Hi All,
    can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
    it is urgent. plssss
    Regards,
    purna

    Hi,
    Yes, we do this by extending controller, but you can also try this without extending controller.
    1. Create Submit Button on TableRN using personalization.
    2. Set "Destination URI" property to like below
    OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
    Give your custom page path instead of EmpDetailsPG.
    EmployeeId and EmployeeName are VO attributes(Table Region)
    If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
    In this case, only personalization will do our job. Hope it helps.
    Thanks,
    Venkat Y.

  • [NIO] custom messages from the netwerk

    Hi you all,
    Yes this is another NIO question :)
    Ok I have the following situation, I've got a NIO server which reads custom messages from the netwerk. These messages consists of an interger and then a variable byte array.
    int -> length of the message
    byte array -> data of message (could be anything)
    On my local network it works fine because I don't have to worry about my read() not reading all the bytes the client send. So I can just use the ByteBuffer.getInt() to read the int and create a buffer for the byte array etc.
    But... on the intenet there is no garentee all the bytes are read. So if only the first 3 bytes of the whole message are in my read buffer and I call the getInt() I'll get an exception.
    How would you fix this? The only garentee is that I will always have 1 byte (except when a connection is closed or other error)
    I could create of small bytebuffer of 4 bytes and wait till it's full and then read the int, but what if I also have a length that can consist out of like 5 or 6 bytes... and I don't know by forehand if it's 4 or 5 or 6... or just 2...
    Any idear would be welcome... or even code if you have the time...
    Grtz
    David

    Use ByteBuffer[] { lengthField, dataField } as a structure for messages. Set the size of the length field statically as part of the protocol. Set dataField's limit to 0. Do readsinto this structure (there is an appropriate read method for an array of ByteBuffers) until there lengthField.remaining() == 0. At this point, read the int/long/whatever from lengthField and set dataField's limit to that. Then do the reads necessary until dataField.remaining() == 0. At this point, you'll have your whole message.
    The reason that I say "do reads" is that on any particular read you may only get one byte's worth of data. Therefore you have to hold this partially completed message in some variable, or as an attachment to the SelectionKey which was selected. As the Channel continually gets selected for OP_READ, you can do the above steps, and if there's not enough left in the channel, you just leave the message partially completed for the next OP_READ. Once it's complete, you do what you need to with it, and replace the attachment or variable with an empty ByteBuffer[] of the above format.
    --Dan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Deleting AET custom field from the SAP tableu2019s level.

    Hi experts,
    I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
    I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
    Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
    Thanks in advance
    Chand

    Hi,
    The deletion of custom field in AET happens in two steps:
    1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
        Doing this, you mark the selected custom field to be deleted.
    2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
    If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
    If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
    Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
    Regards,
    Steve

  • Running SCOM ACS in multiple customer environments from the same SCOM management group ?

    We are currently monitoring multiple customer environments from the one SCOM management group and are looking at possibilities of using ACS for auditing. 
    Is this technically possible ?  Does the ACS collector service need to sit on the customer side ?  could it be installed on the same server acting as the SCOM gateway server ?

    Hi,
    The number of ACS forwarders that can be supported by a single ACS collector and ACS database can vary, depending on many factors, such as the number of events that your audit policy generates, the role of the computers that the ACS forwarders monitor.
    If your environment contains too many ACS forwarders for a single ACS collector, you can install more than one ACS collector. Each ACS collector must have its own ACS database.
    An ACS Collector must be installed on computers running Operations Manager management server and for security reasons, it must also be a member of an Active Directory domain.
    More details please refer to the article below:
    http://technet.microsoft.com/en-us/library/hh212908.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it's calling the person, but I can't hear anything. I also can bearly hear the person when they answer my call.

    My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it is calling them, but I cannot hear anything. Also when they answer my call, I cannot hear them.

    Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.

  • Selecting custom attributes from the default helpdesk screen?

    Can i select and see custom attributes from the default helpdesk screen?  I dont want to have to click through to the details tab as things can and have been missed.  See picture attached.
    This topic first appeared in the Spiceworks Community

    I have worked out the issue. I was attempting to access attributes from the BOR Object "WorkItem" as opposed to elements in the workflow container. When I created a custom container element called "ReferenceID" (as the element name) and used this in my XML it worked successfully.
    I hope this helps someone else in the future.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Taking long time to load from the planning area to the cube since cvc big?

    Hi all,
    We have a huge number of cvc for various countries, while we are planning to load the data from the planning area to the cube using those cvc it consuming 40 hours.
    I happneed to check the cvc are more than 15,000 that is one reason. But i still need to improve the time taken to load the data from the planning area to the cube using the process chain.
    I happened to split the process chain to load data respectively to the sales organisation but still the same!!
    Can anyone help me nor recommend the sap process to improve the data loading from planning to cube in apo demand planning?
    Thanks
    Pooja

    Hi Pooja,
    15K is not huge at all. We have worked with 50k and still managed do the extract into cube in about an hours time.
    Pls help me understand a few things, so that we can help you better.
    1) Number of KF?
    2) Number of Periods?
    3) Key Figure Storage types - Is there any KF stored in Infocube rather than Time Series, this can be found in the Key Figure details in the Planning Area.
    4) Pls explain your data flow like PA--> Datasource --> Communication Structure --> UPdate rules --> Cube???
    5) Are you using Parallel extraction in your Datasource? This can be checked in Data Extraction tools from your Planning Area Screen.
    Few general tips.
    1) Parallelize your datasource.
    2) Load into PSA and Infocube parallely.
    3) Do not include KF stored in Infocube for your backup, use only KF stored in LC.
    Thanks
    Mani

  • I have an iPod Classic. I think it is a 5th generation. I would like to know if I can download games from the App store that say they are for iPads, iPhones, and iPod Touch. Will these work on my iPod Classic?

    I have an iPod Classic. I think it is a 5th generation. I would like to know if I can download games from the App store that say they are for iPads, iPhones, and iPod Touch. Will these work on my iPod Classic?

    No, they won't.
    (58155)

  • How do I set up my email account on my iMac OS Yosemite 10.10.2 so that the emails are downloaded to my computer and removed from the ISP server?

    how do I set up my email account on my iMac OS Yosemite 10.10.2 so that the emails are downloaded to my computer and removed from the ISP server?

    When setting up the email using Apple 'Mail' (version 8.2 (2070.6)) I do not get an option to set up my email as using POP.  I can go to Outlook from Microsoft and I get a chance to set my mail up using POP, however I would prefer to use the Apple supplied 'Mail' email programme as I'm using Office 365 and may not want to continue the subscription sometime in the future.
    Any advice on setting Mail to POP would be appreciated.  A not so Happy Wombat.

  • My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

    My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

    Hi,
    The simplest solution would to restore from your back up - https://discussions.apple.com/docs/DOC-4112
    If you do not have a back, you can select first track on list in song view, from menu > edit > select all. Next ctrl+click and select download from pop up. You may wish to do this in small batches as it will take some time to download.
    Jim

  • TS1702 i have a game called dino island that i downloaded from the app store it wont work it closes when i click on an island

    i have a game called dino island that i downloaded from the app store it wont work after i click on an island why can you help?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • I paid early termination fee two months ago to Verizon and am now out of the country. Am trying to unlock the phone but the local guys say they are not able to. I see from the blog here that iPhone 5 comes unlocked. Is it true?? Do I still have to unlock.

    I paid early termination fee two months ago to Verizon and am now out of the country. Am trying to unlock the phone but the local guys say they are not able to. I see from the blog here that iPhone 5 comes unlocked. Is it true?? Do I still have to unlock. How do I go about it?

    Thank you for reaching out to us, Texasman. Sad to see that
    you have left the VZW family, but it is definitely awesome to be able to
    travel! Regarding your iPhone 5, the phone is unlocked for international usage.
    Just need an active local SIM card that is compatible with your iPhone. Your local provider
    may need to configure some settings under Cellular, but it should pick up signal. Just in
    case, make sure that Settings>Cellular>Roaming>Voice & Data are
    active.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

Maybe you are looking for