Are color settings stored within indesign documents

Good day!
I might have done a more thorough search, but as we use Indesign in a non-english version I may have problems there anyway, so if the issue has been addressed previously could someone please point me to a pertinent thread?
Anyway, our problem is this:
A customer provided indd-files and we populated it with rgb-images of various spaces (ECI RGB v2, which is our RGB working space, and Adobe RGB) and exported x-1a pdfs.
Those pdfs showed erroneous separation for the Adobe RGB-files.
Our Color Settings are set to Preserve Embedded Profiles for RGB-mismatches.
But newly imported RGB-files seem to always get set to Document Space in those documents.
So the indd-files seem to maintain the Color Management Policies of the application as of the time of its creation and disregard the current settings.
Can this be remedied for those files?
Thanks in advance for any feedback.

Thanks a lot.
Exporting an idml did not do the trick for me.
»if you enable the mismatch warnings (and I think you should), you are prompted and given the opportunity to overide the embedded policy.«
I usually have those turned off to be able to have the programm open multiple files of different spaces un-attended.
But your recommendation is appreciated and indeed seems to be the (only) way to go here.
And embarassingly I had forgot to mention in the original post: Indesign 7.0.4, OSX 10.6.7

Similar Messages

Is there a way to find text within InDesign documents in a search using windows environment?

We are working in Windows and transitioning from using Word to InDesign for our documents. InDesign documents do not show up in the results when trying to search for a file name or file contents. How can we search for specific text within our InDesign documents? Any suggestions would be greatly appreciated.

http://markzware.com/products/pagezephyr-search/

Where are Optimizer settings stored?

I need to deploy PDF Optimizer settings throughout my organization, like I did with joboptions.
So far I have been unsuccessful in searching for a file with the name into which I saved my optimizer settings.
Where are the optimizer settings stored? I would hate to have to set these all manually for everyone.
Any help will be greatly appreciated.

Hi All,
Thanks for the info. I think this is what I need, but I opened the Javascript console and pasted in the code and nothing happened.
(Programming, javascript, etc are not my area of expertise. My core competency is writing/editing.)
What else do I need to do to make the Console recognize and respond that line of code?

Are Workbook settings stored in any table

Hi Gurus,
Are the workbook settings stored in any of the tables? There is a requirement for me to collect the information on whether the Refresh automatic has been checked or not for the workbooks.
It would be great, If any of you can provide me with the details of the same.
If you require more details, let me know.

Hi Pl check following tables
RSRWBINDEX List of binary large objects (Excel workbooks)
RSRWBINDEXT Titles of binary objects (Excel workbooks)
RSRWBSTORE Storage for binary large objects (Excel workbooks)
RSRWBTEMPLATE Assignment of Excel workbooks as personal templates
RSRWORKBOOK u2018Where-used listu2019 for reports in workbooks
Check the table RSRWORKBOOK
Get the ID of the workbook from RSRREPDIR table
Thanks and regards

Settings stored locally in Documents & Settings

HI there.
I remeber reading an answer when migrating to 1.5 last year, that you had to specify
AddVMOption -dide.user.dir=G:\whateverdir in the *\ide\bin\ide.conf file*
in order to have the settings stored ie on a network drive (sharing the setup, when logging on to other pc's, servers etc).
I cant seem to make this work in the new 1.5.4 ... It stores all the XML files in documents&settings\myuser\applicationdata\sqldeveloper ...
And I cant seem to fint the question&answer here in the forum again
What may I have missed?
regards
Mette
Edited by: mettemusens on 2009-03-18 14:35

Hi and thanks again :-)
Do I hate java and its conventions? Answer: yes.
Well - why on earth make a variable with the utterly saying name D (and make room for another one - called d??).
So, yes - it was case sensitive ... now it works fine :-)
regards
Mette

Where are proxy settings stored for JRE 6

Where are the http proxy settings stored for JRE 6? I am trying to figure out how to centrally manage these settings for a large number of computers. I have heard about the deployment.properties file, however changing this file is not changing my proxy settings.
Thanks for you help.

Hi All,
Thanks for the info. I think this is what I need, but I opened the Javascript console and pasted in the code and nothing happened.
(Programming, javascript, etc are not my area of expertise. My core competency is writing/editing.)
What else do I need to do to make the Console recognize and respond that line of code?

Color looks different within a document in different page

Hi,
I created a square with a green stroke (RGB-0.255.0) that I had placed on different pages within a document.
On some pages, the green looks perfect and some other pages it looks like it is converted in CMYK, The green doesn't look the same.
Does anyone have an idea why?
Thanks

There's probably transparency of some sort on those pages and your transparency blend space is set to CMYK.

How are UI Elements Stored Within a View Controller

I want to develop understanding on how the UI Elements Stored Within a View Controller.

Hi Sameer,
Could you be more specific about your question!
Regards,
PG.

Where are the settings stored?

I have messages that have the color set on them for organizational purposes. I want to copy these settings to another MAC. Where is this information located?
(The rules I have copied... I want the INBOX to show the same coloring on the other MAC.)
Thanks!

This is an IMAP account by the way... So you think that when I mark a message RED for example, that this information is stored in the general MAIL preference file? I would have expected to find it somewhere in the /users/Library/Mail folder, as it relates to a specific message. The RULES I have been able to move just fine... it's just that when I COLOR a message on one computer I want that color to show up on the other computer as well... Does this make any sence at all?
(Using .mac to sync results in the same problem. The rules are synced, but the modifaication I made to the individual IMAP message does not sync. Flag, Color, etc.)

PhotoShop Color Overlay for Interactive Indesign Document

Hello world!
Im trying to figure out how to do what the following email says:
"We typically do them like this – a SketchUp model, with color overlays done in Photoshop. We then use the color overlay document to create the InDesign links for the code document."
This is for a city planning code. Im not very proficient on PS but I do use illustrator daily. The image attached shows what I suppose are the color overlays from PS. I havent found anywhere how these overlays can be links... Am I just confused? Please help.
[ i thought of just using multiply and the pen tool on illustrator to color the exported sketchup scenes,no linking to anything though]
Thanks!!!!!!
( I

That sounds more clear to me ! We'll see what it ends up being when I hear back from them but your directions would be easy to research and execute. Thank you BobLevine

Where (in the filesystem) are network settings stored?

Hello,
i did a clean install of mavericks, and want to import the network settings from an older backup i did (have both: 10.8 full backup and 10.9 library folder backup) into the new system; unfortunately i don't know where they are stored, and can't seem to find any information on this issue!
I searched all of the preferences and application support folders, but no success.
does anyone know more about this?
thanks & kind regards

ah, thanks! i read about "SystemConfiguration" before, but didn't find it - i searched in the user's library folder, but it's the "global" library folder. only have the user library backup with me now, but will check later when i get home. thanks!

Where are toolbar settings stored in Acrobat 9?

We recently deployed Acrobat 9 firmwide and now realize that the "rotate clockwise" and "rotate counterclockwise" buttons do not appear on the Page Display Toolbar by default. This is causing our users some trouble as they are used to just clicking a button to rotate images. I have been unable to find where this particular setting is stored in the registry; our hope is to use Group Policy to add these buttons to everyone's toolbar. We do not want to re-deploy this application. Can anyone help me out? Much thanks in advance!

Thanks, Steve. Actually, the ones I needed--my custom settings--were stored in a similar path: [username]>Library>Application Support>Adobe>Adobe PDF>Settings. What's interesting is that if you do a search for ".joboptions", none of these are found. Curious!
I'll make a note of this path.

Where are monitor settings stored beside krandrrc

Hi.
I would like to ask for help. Recently i've found interesting issue regarding KDE monitor system settings. KDE system settings make one config file in ~/.kde4/share/config named krandrrc. When we use KDE monitor system settings, configurations are stored in file krandrrc (information like resolution, refresh rate, orientation when there are 2 LCD displays connected and so on are stored here).
I have dual monitor setup. I found this issue because of what i do by an mistake. I chosed to disable my second screen, hit save - i wanted to disable it. Than by mistake i disabled my first, primary screen and this choos was saved right on the spot (i though that when i won't acept settings, they will be restored, just like in Windows, but there were not). So, in fact, i ended with second screen disabled and my first screen disabled, so after each boot, i log in and than, my picture/screen goes off and my lcd monitor shuts itself off.
I tried to delete krandrrc file in ~/.kde4/share/config but it did not make a change. Is there a different config file for monitor settings in KDE? How i could restore it back? Is there a way? I restored it by a chance (i just logged in, hit alt+f2, tried to type "terminal", and than type xrandr --auto but this metod is a metod that needs luck because we can't see anything with disabled screen). I deleted also xorg.conf but in Arch, in fact, it is not needed because udev. I tried to log into tty by hitting alt+f1, but in terminal typing xrandr --auto won't make difference, it says that it can't start X window session so it works only in gui.
Could somebody help? Maybe you have a fix for it?
Thanks.
Last edited by firekage (2014-10-17 11:57:36)

Hi firekage,
I came across your post while trying to fix a similar issue on my laptop. I don't have a krandrrc file. However, I found that if I deleted the files in my ~/.kde4/share/apps/kscreen directory I was able to "start over" and configure my displays again.
Hope that helps you out.
--Ted

Where are network settings stored?

I want to copy (migrate) the network settings (I have various locations) from my MBP to my wife's MBP after the HDD had been replaced. Does anybody now where this locations and its settings are stored? Would save me quite some time.

Worm76 wrote:
You can also export your settings from System preferences > Network, at the bottom of the window press the little wheel and choose export
This I also found but this "Export Configurations" is greyed out for all but Bluetooth settings. i searched the forums and that seems to be consistent.
christian

Where are VPN Settings Stored in Mavericks?

So, the short version is;
Anyone know where all the VPN settings are stored in Mavericks; and can I just use ARD to copy that file from one machine to another?
Longer version is:
I've been a user of DeployStudio for years and years for all my Imaging needs, it's worked great in general.
But Mavericks, and these new MacBook Pro's (11,2) models are giving me stress....
I have the latest build of DeployStudio, and it works, I can Netboot with multiple models, (iMAcs, Mac Mini's, Air's, Macbook Pro)
Build number 1.6.4-NB140206
The issue i'm having is builds seem to create fine, but when I put the build on the new Macbook Pro's (11,2) Models. the VPN Configurations are not being read. The Imaged machines show VPN as "Not Configured"..
I've tried re-building my base machine multiple times, the Configurations are postively there when I create my build. The configurations are still there after I create an image of the machine.
But when I put the build onto another (11,2) Model the VPN settings disappear.
I'm wondering if there is a configuration file that holds the settings. I have tried exporting the VPN entries, and re-importing them on the new machine, but when I import them, the come in as LT2 IPSEC, instead of the proper Cisco (IPSEC). So i'm getting stuck.
Thanks.

I think i resolved it. I put the "By Hosts" folder in my User Template, and i think that's what was messing up the VPN and Keychain on my builds..

Are color settings stored within indesign documents

Similar Messages

Maybe you are looking for