Are Compressor 3 and FCP2 Fundamentally broken for use of Qmaster Clusters?

Has anybody gotten FCP2 and Compressor 3 to submit jobs to a Qmaster cluster and actually produce output.
I have been trying for days - have read the threads here and in the Compressor section and so far cannot get it to work.
Jobs are automatically canceled on submission and FCP2 then hangs and has to be forced to quit.
Qmaster and compressor services stall and become red in Activity Monitor.
I have reset services and restarted backround service (in compressor) and even done a full os and fcp2 re-install.
I have tried QuickClusters and full managed controller/service clusters. I have tried a single machine cluster and multi-machine clusters. All no-go.
I can make it all work if I submit to "this comnputer" but never to a qmaster cluster.
Anybody had better results?

Here is the log from a failed job
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services>
<service displayName="My%20Cluster" hostName="Office.local" type="servicecontroller:com.apple.stomp.transcoder" address="tcp://1.1.1.1:50676">
<logs tms="203704884.672" tmt="06/16/2007 09:41:24.672" pnm="compressord">
<mrk tms="203705087.974" tmt="06/16/2007 09:44:47.974" pid="1211" kind="begin" what="service-request" req-id="413BC25A-0BB8-4ABD-9DD7-0B90C3B13917:1" msg="Processing."></mrk>
<mrk tms="203705087.979" tmt="06/16/2007 09:44:47.979" pid="1211" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
<log tms="203705087.979" tmt="06/16/2007 09:44:47.979" pid="1211" msg="Cluster storage URL = nfs://Office.local/private/var/spool/qmaster/D8F3A3C2-E898D280/shared"/>
<log tms="203705087.980" tmt="06/16/2007 09:44:47.980" pid="1211" msg="Local subscribe path = /var/spool/qmaster/D8F3A3C2-E898D280/shared"/>
<log tms="203705087.980" tmt="06/16/2007 09:44:47.980" pid="1211" msg="Not subscribing, cluster storage is local and its path matches the local subscribe path."/>
<mrk tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
<mrk tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" msg="Source file mediaserver:///private/var/tmp/folders.501/TemporaryItems/312D61E1-BBC4-4041-AF 66-10.fcp;appSignature=com.apple.FinalCutPro%26itemname=1%26framerate=29.97%26in =0%26out=41075%26nativeCodec=icod%26nativeCodecMfr=appl%26displayName=4361706520 546F776E20323030362D372D4361706520546F776E20323030362D37%26width=1440%26height=1 080%26startTC=29.970000%20107892%20DF%26fieldDom=2%26channelLayout=6619138%26sam pleRate=48000 is directly accessible."/>
<log tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" msg="Source file can be opened."/>
<log tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" msg="Source file can be read."/>
<mrk tms="203705087.981" tmt="06/16/2007 09:44:47.981" pid="1211" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="203705087.990" tmt="06/16/2007 09:44:47.990" pid="1211" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/D8F3A3C2-E898D280/shared/Cape%20Town%202006- 7-Cape%20Town%202006--7CF70D26-F62E-4C45-853B-AEDA18B91864.m4v-5"/>
<log tms="203705087.991" tmt="06/16/2007 09:44:47.991" pid="1211" msg="Writing transcode segment: file://localhost/var/spool/qmaster/D8F3A3C2-E898D280/shared/Cape%20Town%202006- 7-Cape%20Town%202006--7CF70D26-F62E-4C45-853B-AEDA18B91864.m4v-5"/>
<log tms="203705088.010" tmt="06/16/2007 09:44:48.010" pid="1211" msg="QuickTiime Transcode, rendering in YUV 8 bit 444"/>
<log tms="203705088.636" tmt="06/16/2007 09:44:48.636" pid="1211" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/D8F3A3C2-E898D280/shared/Cape%20Town%202006- 7-Cape%20Town%202006--7CF70D26-F62E-4C45-853B-AEDA18B91864.m4v-5"/>
<mrk tms="203705088.645" tmt="06/16/2007 09:44:48.645" pid="1211" kind="end" what="service-request" req-id="413BC25A-0BB8-4ABD-9DD7-0B90C3B13917:1" msg="Processing service request error (exception=Final Cut Pro generated an error or unexpectedly quitUser aborted Media Server)."></mrk>
</logs>
</service>
</services>

Similar Messages

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
Ed

Well, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version.

Can i buy an iPhone at a pawn shop and get it unlocked for use with Straight Talk wireless?

Just wondering if I can buy a used iphone at a pawn shop or on ebay and get it unlocked for use with the prepaid Straight Talk wireless service? If so, how much would it cost to get it unlocked?

PHones can only be unlocked from the carrier; if you're looking for an unlocked device I'd recommand buying it directly from Apple as that is the only way to promise it is, if you buy it second hand you may find it is locked to a carrier who doesn't support unlocking, or worst yet activation lock

Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

My storage capacity has diminished and won't recapture when I delete apps/pics/songs. I'm down to 13.3 GB and no bytes available for use.

I'm down to 13.3 GB and no bytes available for use.

You need to do a Restore. It's easy to do but it's reasonably time-consuming. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

SP7 tcp and 681j tcp broken for me.

Hello all,
I have this very long and storied journey that I hope you will read, as TCP is broken for me.
Facts:
Netware OES 6.5 sp7 and TCP681J domestic and Null.
TCP680b (working)
Dell 2650 server with Broadcom NiC, b57.lan version 10.41 (newest from dell and came with sp7)
PIX 515 code 8.0.2 performing dynamic and static NAT, with a DMZ
Novell DNS/DHCP
eDir 8.8 sp2
Okay here we go.
I was in a long battle with the Bordermanger people telling them that TCP was broken. Today I took my BM server out of the tree and rebuilt it from ground up. The problems I am having have nothing to do with BM as when I built this computer from scratch and just did routing, DNS doesn't work.
Okay, so I have a BRAND NEW server that I just built. I have two network interfaces, internal and external. The external is connect directly to the PIX 515 and the internal is connected directly to our internal network.
So, I turn on routing on this new server with SP7 on it, and I can not do a DNS lookup from the server. None of my DNS servers can do lookups, and none of my workstations pointing to my internal DNS servers can do lookups. My DNS servers have pointers to external DNS servers which are running. I can not even see my PIX firewall from inside my network, yet the BM can ping it just fine.
I patched to 681J and tried both Domestic and Null and got the same result.
Then I took the TCP 680b (TCP.NLM, TCPIP.NLM, BSDSOCK.NLM) and put it on the server. WOW, I CAN RESOLVE AGAIN! I can even browse the internet and get to my pix and DMZ.
So why don't I just stay this way? Because the connection to the PIX randomly drops. Again, I do not even have BM installed on this server. If I did, I would have 3.8 sp5 ir1.
Now, if I do the same thing with a POS workstation, build a Netware OES 6.5 sp7 server, everything works fine. Server hardware you ask. Maybe, but it must be specific to Dell 2650 and Broadcom NIC's because I built another server using the EXACT same hardware and got the same result. I also built this on a test Dell 830 server and it worked just fine.
I have proved this over and over and over again with my colleagues and we still don't get it; that we would be the only people with this problem.
Can someone help?
Tom

Ignore this previous post, it is late and I didn't read your post thoroughly.
Sorry
"Karim C Kronfli" <[email protected]> wrote in message news:[email protected]. ..
Tom I would seriously check your filtering configs and similar as I am running SP7 OK on 2 BM servers here.
1: Are DNS Queries allowed out through
a: Your PIX IP Filters (plug a machine direcly into your PIX and see if if you can query an external DNS Source)
if a: works
b: Your Netware IP Filters (Test drop your filters and see if you can ping an external host using its dns name
What is yor DNS Configuration?
Are your DNS Servers doing route lookups? or checking your ISP's DNS.
Agreed with Massimo. a quick bit of Wireshark on your DNS Servers might prove extremely helpful.
Hope this helps
Karim C Kronlfi
CNE 6
"Tom Hafemann" <[email protected]> wrote in message news:[email protected]...
Hello all,
I have this very long and storied journey that I hope you will read, as TCP is broken for me.
Facts:
Netware OES 6.5 sp7 and TCP681J domestic and Null.
TCP680b (working)
Dell 2650 server with Broadcom NiC, b57.lan version 10.41 (newest from dell and came with sp7)
PIX 515 code 8.0.2 performing dynamic and static NAT, with a DMZ
Novell DNS/DHCP
eDir 8.8 sp2
Okay here we go.
I was in a long battle with the Bordermanger people telling them that TCP was broken. Today I took my BM server out of the tree and rebuilt it from ground up. The problems I am having have nothing to do with BM as when I built this computer from scratch and just did routing, DNS doesn't work.
Okay, so I have a BRAND NEW server that I just built. I have two network interfaces, internal and external. The external is connect directly to the PIX 515 and the internal is connected directly to our internal network.
So, I turn on routing on this new server with SP7 on it, and I can not do a DNS lookup from the server. None of my DNS servers can do lookups, and none of my workstations pointing to my internal DNS servers can do lookups. My DNS servers have pointers to external DNS servers which are running. I can not even see my PIX firewall from inside my network, yet the BM can ping it just fine.
I patched to 681J and tried both Domestic and Null and got the same result.
Then I took the TCP 680b (TCP.NLM, TCPIP.NLM, BSDSOCK.NLM) and put it on the server. WOW, I CAN RESOLVE AGAIN! I can even browse the internet and get to my pix and DMZ.
So why don't I just stay this way? Because the connection to the PIX randomly drops. Again, I do not even have BM installed on this server. If I did, I would have 3.8 sp5 ir1.
Now, if I do the same thing with a POS workstation, build a Netware OES 6.5 sp7 server, everything works fine. Server hardware you ask. Maybe, but it must be specific to Dell 2650 and Broadcom NIC's because I built another server using the EXACT same hardware and got the same result. I also built this on a test Dell 830 server and it worked just fine.
I have proved this over and over and over again with my colleagues and we still don't get it; that we would be the only people with this problem.
Can someone help?
Tom

What are the pros and cons of storing heavely used CFCs in the application scope?

I've been storing all the required CFCs for a site in the application scope. During onApplicationStart I do something like this application.objSomeCfc =CreateObject('component', 'com.someCfc').init().
Here is my reasoning.
Get the CFCs initialized once and stored in memory for better performance.
Using CreateObject several times on each page load can have a negative impact on performance.
Having one place to create application scoped CFCs makes it easier to manage code.
So is my thinking flawed? Are there any additional pros or cons for dealing with CFCs? Is there any docs, articles, blogs, videos, frameworks, ...... that I should check that may change my perspective on how I'm doing this?
Thanks

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

Structure inDesign document and export as XML for use in the web

Hello everyone,
I just recently started using inDesign and I am fascinated by its possibilities! I use it for a project where a finished inDesign layout that is used for a printed publication is now supposed to be transformed for implementing it on a web site. My job is to export the inDesign document as an XML file. After massive reading the last weeks I'm quite familiar with the structuring and tagging in inDesign. Though there's some issues I do not understand. Your precious advice would be of highest meaning to me
The programmer who will later use my XML output for the web-transformation needs the document structured in different levels like "Root > Chapter > Subchapter > Text passage / table". I already structured the document with tags like title, text passage, table, infobox,... but the structure is just linear, putting one item following to another.
How can I structure the document with reoccuring tags that enable me to identify the exact position of an item in the document's structure? So that I can say for example "text passage X" is located in chapter 4, subchapter 1. This has to be done because the document is supposed to be updated later on. So maybe a chapter gets modified and has to be replaced, but this replacement is supposed to be displayed.
I hope my problem becomes clear! That's my biggest issue for now. So for any help I'd be very thankful!

Our print publications are created in InDesign CS5 for Mac then the text is exported to RTF files then sent to an outside company to be converted to our XML specifications for use by our website developers. I would like to create a workflow in which our XML tags are included in the InDesign layouts and then export the XML from the layouts.
Some more detail about what kind of formatting is necessary might be helpful.
I know that IDML files contain the entire layout in XML format. Is it a good idea to extract what we need from IDML, using the already-assigned tags?
Well, if you want to export the whole document, it's the only reasonable approach.
We use a workflow system such that each story is a seperate InCopy document, stored in ICML format (Basically a subset of IDML). Our web automation uses XSLT to convert each story into HTML for use on our web site; it also matches it up with external metadata so it knows what is a headline and what is not, etc.. It is not exactly hassle free, and every once in a while someone uses a new InDesign feature that breaks things (e.g., our XSLT has no support for paragraph numbering, so numbered paragraphs show up without their numbers).
You could do the same thing with with IDML, you'd just have to pick out each story, but that's small potatoes compared to all the XSL work you're going to have to do.
On the other hand, there may be better approaches if you're not going to export the whole document. For instance, you could use scripting to export each story as an RTF file, and then you could convert the RTF files into HTML using other tools.

Are latest versions of the firefox disabled for using in poor countries?

Is it possible to stop wasting of my money without Firefox deleting? Firefox downloads something (I suspect it's "safebrowsing" base) from Google almost continuously. I keep "browser.safebrowsing.enabled" and "browser.safebrowsing.malware.enabled" always false (about:config shows that, but it's not present in "Troubleshooting Information" below. Why?). I use fresh resetted profile. Whether it means that latest versions of the firefox are disabled for using in the rest of the world, where traffic can costs upto $0.3 per Mbyte?
The article https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
and topic https://support.mozilla.org/en-US/questions/968773 are useless.

I have not tried Live Http Headers. I'll try. Nethogs shows that firefox suddenly starts consume all bandwidth long time and Wireshark shows encrypted traffic from google network 195.64.213.0/24.
PS. It's a GGC address.
PPS. After 6 hours of observation I catched next download, but not catch an initial request. The firefox downloaded near 100MB of binary stuff from 173.194.58.185 (belongs to Google, not has a host name).

Copying and moving iWEb components for use elsewhere

I learning and working with alternate sites using Joomla, an open system style web site creator
Where do I go on my Mac to find the components (specifically images and text that I've entered in iWeb) so I can copy them for use elsewhere?
Thanks
Gary

Gary:
The items you add to a web site are located within the Domain.sites2 file which is in your User/Library/Application Support/iWeb folder. The image files will be in there but the text you added to a page will have to be copied from the published page or from the page when opened in iWeb.
OT

Reporting Service Integration mode and Key not valid for use in specified state

I had to uninstall SharePoint Foundation 2013 and reinstall it.
What I have done:
I uninstalled SharePoint and after that I removed all databases.
I reinstalled SharePoint Foundation 2013 and it completed without errors.
Everything else is working, except SSRS in Sharepoint Integrated Mode.
If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
"Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
"Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
It seems that "Encryption Keys" cause this problem.
https://support.microsoft.com/kb/955757
https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
"Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
I don't have any reporting server databases, because I removed all
databases when I uninstalled SharePoint. Also I don't have Encryption
Keys backups.
I have found several similar question but no answer, example here:
https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
Any ideas how I can fix this problem?

Hi,
From the Reporting Server Configuration Manager you have to restore the encryption key.
Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
If the issue still exists, Please check ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Are the read and write operations atomic for an array in a local variable.

Hi,
I would like to know when you access an array in a local variable, is it an atomic operation?
Thanks,
Mat

Thanks for the comments. I agree with you. However, I my case, race conditions and synchronization are not issues. Therefore, the only thing that matters to me is that the write and read operation of the array must be atomic. I know that I can implement that with a LV2 style global but I want to avoid it if possible.
If writing and reading to an array are atomic operations then I can simply use local or global variables.
All I need to know is: Is reading or writing an array in a local variable an atomic operation?
Thanks,
Mat

PRINT ARE TO LARGE AND SUMMARY SAYS 9X11 FOR LETTER SIZE???

I am completely stumped by this probelem. For some reason my prints are comming out larger than they are supposed to in Illustrator. When I print a page and choose letter size with no border I check the summary page and it says that I am printing to a 9 x 11 inch page. This doesnt make any sene becasue everywhere else it is listed as 8.5 x 11. Ive tried reinstalling illustrator, my printer drivers, deleting printers completely, and nothing seems to work. If anyone has any ideas I would be so grateful
I have a MacBook Pro running 10.5.6 and the CS4 Master Collection.
Everything has been updated for both CS4 and OSX.
My printer is a Epson r1800. ( i dont think its a printer problem because even when I delete the printer from the mac system the Illustrator print summary still says 9 X 11 when I print to an 8.5x11 page.)

no you are incorrect the document size is still is still 8.5 x 11 and
the bug i in the display of the paper size when it is displayed in
inches you can test this by closing the print dialog and then changing
to points and you will see you are back to 612 points by 792 points or
8.5x11. The reason you are getting an enlarged document is that you
are choosing to use bleed paper for your printer and that has nothing
to do with the bug for display the paper size incorrectly. Keep in
mind paper size and docunent size are independent of each other and
mean two different things.
When you choose bleed for the paper your printer's drivers enlarge the
document, that is not a bug, it is an expected behavior.
There is usually a control for the amount of enlargement you wish to
occur but there must be an enlargement in order for the bleed to be
success due to paper shift in the printer. If you don't enlarge and
the paper shifts just a little you get a white edge on one side. You
can set the bleed amount to be the minimal and that will help you get
close to the correct size but still it will be sightly larger then the
actual document file or artboard.

Are there theme and template or customization for modules?

The modules in buisness catalyst are very useful. However, they don't excactly look pleasant enough as they are too simple.
I'm building a chinese site and I want to add modules like blog, gallery and blog, news from buisness catalyst modules to my site created with Muse. It worked fine, however, I was wondering if maybe I can customize it a little? For example, adding frame and shadow to the gallery thumbs, or using a web font for the title of the blog module. I found the customize function in the develope mode, however, it provide very limited options such like the rows and the size of the image only.
Are there themes of template for all the different kind of modules or can I customize my own?

Not really from Muse no. It is very limited.
You can 100% go to town on the layouts and CSS of all of those you mentioned to customise the look and feel.
If you code your site and can edit the blog layouts for example and customise the html, then add your classes and ID's and then use CSS to style them. The BC gallery is a bit more limited but if you have a plan that supports web apps you can build your own for example and again customise the look and feel with CSS and the layouts of the web app in HTML. The functionality you can then apply with Javascript.

Are Compressor 3 and FCP2 Fundamentally broken for use of Qmaster Clusters?

Similar Messages

Maybe you are looking for