Are CS 3.0 and CS 6 compatible

I have a user who built a bunch of files in CS 3.0, but now we have upgraded to CS 6. Can he open those files in CS 6?
thANKS FOR ANY HELP, MG41

While Bob is correct, there have been enough posts since the release of CS5 about problems that develop with converted CS4 and CS5 files (often at the point of PDF Export) that I strongly advise that you export .inx from CS3 and open that for conversion instead.

Similar Messages

Are iTunes iOS 5 and Windows XP compatible?

I'm having problems installing the latest iTunes on my Windows XP laptop. I imported the .exe file but half way through executing installation it comes up with an error. Is latest version of iTunes compatible with Windows XP?

The latest version of iTunes refuses to install on x64 with the information that Win x64 is not supported.
That's annoying, I hope there will be a 64bit version soon...

Satellite M30: Are the SD-R6472 and SD-R6572 drives compatible?

Hi,
are the SD-R6472 and SD-R6572 DVD-RW DRIVES compatible with the Toshiba Satellite M30?
THX

Hi
I dont have found any further information about the compatibility of this drives with the Satellite M30.
But if you want you can visit the Toshiba website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP
There you can find options and accessories for many Toshiba units.
Check it.
Ps: You can also try to ask the Toshiba service in your country for the details.

Are AfterEffects 5.5 and 6 compatible

Are aftereffects 5.5 and 6 compatible

Suggest you post your question in the After Effects forum
http://forums.adobe.com/community/aftereffects_general_discussion

Installed eprint app on ipad2 and iphone, have compatible printer hp oj 8500a , but can't print

I have installed the eprint app on my Ipda2 and Ipone 3gs and still not able to print anything except pictures?? can't figure out why when I'm in email, documents, etc eprint nir airprint come up. My printer is an HP OfficeJet Pro 8500a Plus, compatible with both. If I use Print Direct App i can print documents I save to that app but don't really want to use that and prefer to use airprint or eprint. HELP

Hi lobsterdiver1,
I would recommend:
Going to the Web Services menu inside the Setup menu.
Enabling Web Services.
Install any updates that are available after enabling web services (the printer will prompt your or you can manually check for updates under the Web Services menu).
Make sure your iPad and iPhone are connected to the same network as the printer.
Try the AirPrint option located in one of the default apps (Safari, Photos, or Mail).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

Can't see iPhoto pics that are edited in PS and saved back to iPhoto

Photos that are edited in Photoshop and saved back into iPhoto don't show up in the iPhoto window. Only the originals show up. When I do a search, I see that they are saved in a "modified" folder inside iPhoto. How can I see them in the iPhoto window? I would like to "trash" some of them. Can I just drag them to the trash from the "modified" folder or will that foul up the iPhoto database?
Rick

Maybe this will help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full sizes
I also suggest the Maximize PSD File Compatabilty be set to Always.
In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT

What are the available software and apps for ipod nano

what are the available software and apps for ipod nano

saif78 wrote:
what are the available software and apps for ipod nano
Sorry, but Apps are not compatible with the iPod and there is no additional software available for it.
B-rock

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

InDesign files are compatible wih all the newer versions. A cs4 file sh
Could you answer a few questions to help us better understand the issue:
If you are trying to open the files by double clicking them, do they give any error??
Have you tried to drag a file into indeisgn, if yes what happends when you do that??
Is there any error message that you get??
Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

Are there any Mac 10.x.x Compatible Gamepads / Joystick? Please send me the link.

Are there any Mac 10.x.x Compatible Gamepads / Joystick? Please send me the link.

Hi Dominic23,
There are many gamepads that are listed but if you check the specification it only shows that it is compatible with PS2 / PS3 / PC and no where it shows Mac. I have one example
There is a gamepad from ferrari Thrustmaster which will be listed when i put the above search string mentioned but if you check the website it shows it is compatible with PS2 / PS3 / PC.
Is there any recomended Gamepad that is fully compatible with Mac, recommended by Apple??

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

When are you going to make GOOGLE TOOLBAR compatible with the latest version of firefox, i will not update to version 8 until its compatible

Question
When are you going to make GOOGLE TOOLBAR compatible with the latest version of firefox, i will not update to version 8 until its compatible

It's not going to happen. Google announced withdrawal of their Google Toolbar.
Using Google Toolbar features without toolbars - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
The Google Toolbar will not be updated for Firefox 5 or later Firefox versions. ([http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html reference]) Google finally decided that their [http://kb.mozillazine.org/Problematic_extensions problematic extension] is beyond repair for the little benefit added for Firefox users. Google as with other browsers is eliminating or making toolbars less accessible.
Consider the features that you are using and see if you can match up features from the list created by Google and by Firefox users.

HTC 8X Case with Stand and Inductive Charging compatible?

I know this may be a stretch, but I've come very accustom to using my inductive charging on my 8x. I find it very nice to just be able to set it down and be on my way. I have another case that has a stand built in that it very useful.
Has anyone come across a case that can do both? Built in stand and is still inductive compatible??
Any suggestions would be appreciated.
Thanks.

The one I know of is Otterbox 8x case. But that is too bulky. However the stand is only horizontal. Here take a look at their video http://www.youtube.com/watch?v=hpRE06PezbY (2:20)
I have the blue rubberized 8x case. Usually the 8x can wireless charge through any case. So since you already have a case, all you need is a wireless charging stand. You are in luck because Nokia makes one for their Lumia 920 and it also works for any Qi inductive wireless charging phone .Its called the Nokia Wireless Charging stand. Unfortunately since Verizon only sells the plate, not also the stand, the cheapest one I have found is at an ATT store. In ATT store they are running for $69 and in most places for $80.
http://www.att.com/shop/wireless/accessories/chargers/sku6290329.html#fbid=TZuI3jsemTV
Great part about this charger, is that it also comes with built in NFC. So you can run some apps in NFC from your phone. For example like leaving the alarm clock on while charging overnight or listening to music while the phone is charging. Take look at the review of this video so you have an idea.
http://www.youtube.com/watch?v=ns8Hm8H4MAQ

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
Open Office is free, you can download it here:
Open Office for Mac

Are CS 3.0 and CS 6 compatible

Similar Messages

Maybe you are looking for