Are data in aggregates deleted when data in a Cube is archived (BI 7.0)?
Hi all
Do you know if the deletion run which is a part of the arching process will delete data in aggregates as well when data in a given infocube is archived?
Kind regards,
Torben
Hi Torben,
we are following the normal procedure through SARA and we are not using ADK.so i don have any idea about ADK.
More over while scheduling the archive job keep in mind that there is no confliction with the loading procedure (which includes rollup,compression recreating the indexes etc,,..).so it wont effect the normal procedure.
Only the thing is if you are using ADK then the things remain same but all should be taking care by the ADK i think.
Thanks,
Ashok
Similar Messages
-
Why are inbox mesgs being deleted when I close my e-mail program ?
Hello. Thanks for your help.
Every time I finish reading my inbox e-mails, then close the program,
all the inbox messages are automatically deleted.
When I open the inbox the next time, all messages that were in the inbox are gone forever.
Thank you.
Marlene LorbererPOP or IMAP? If IMAP, have you checked what appears on the server, via your email provider's website? Are the missing messages visible there?
You may have inadvertently selected a setting that shows only unread messages, so when you come back to Thunderbird they are hidden after having been read. Check you have View|Folders|All, and that the Read selector in the QuickFilter toolbar is de-selected. -
I Did a software update. The store employee couldn't help me after checking my settings. Will go back for an appointment but in the meantime can anyone help?
DO you have verizon-yahoo account?
-
How can i retrieved data into the infocube from archived files
hi,
i have archived cube data and i have to load data into the cube from archived files.
so now i want to find archived files and how to load data into the cube.
thanksHi.....
Reloading archived data should be an exception rather than the general case, since data should be
archived only if it is not needed in the database anymore. When the archived data target is serving also as a
datamart to populate other data targets, Its recommend that you load the data to a copy of the original
(archived) data target, and combine the two resulting data targets with a MultiProvider.
In order to reload the data to a data target, you have to use the export DataSource of the archived data
target. Therefore, you create an update rule based on the respective InfoSource (technical name 8<data
target name>). You then trigger the upload either by using Update ODS data in data target or by
replicating the DataSources of the MYSELF source system and subsequently scheduling an InfoPackage
for the respective InfoSource
If you want to read the data for reporting or
control purposes, you have to write a report, which reads data from the archive files sequentially.
Alternatively, you can also use the Archiving Information System (AS). This tool enables you to define an
InfoStructure, and create reports based on these InfoStructures. The InfoStructures define an index for
the archive file data. At the moment, the archiving process in the BW system does not fill the
InfoStructures during the archiving session automatically. This has to be performed manually when
needed.
Another way of displaying data from the archive file is by using the Extractor checker (TCODE RSA3).
Enter the name of the export DataSource of the respective data target (name of the data target preceded
by 8), and choose the archive files that are to be read. The extractor checker reads the selected archive
files sequentially. Selection conditions can be entered for filtering but have to be entered in in internal
format
It will remain same in the change log table.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b32837f2-0c01-0010-68a3-c45f8443f01d
Hope this helps you...........
Regards,
Debjani............ -
Wish to keep always 2 years of data on the cube
Hi Experts,
we wish to keep always 2 years of data on the cube and archive the data after it is 2 years old.
Any thought on this is appreciated.
Thanks,
Varun.hi Varun,
you can use tcode SARA and 0calyear as selection to archive the cube to flat file or another cube,
for more detail please follow this how to archive in bw doc
https://websmp108.sap-ag.de/~sapdownload/011000358700000085572002E/HowToArchiveinBW.doc
hope this helps. -
How to delete aggreagetd data in a cube without deleting the Aggregates?
Hi Experts,
How to delete aggreagetd data in a cube without deleting the Aggregates?
Regards
Alok KashyapHi,
You can deactivate the aggregate. The data will be deleted but structure will remain.
If you switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. Switching off the aggreagte won't delete any data,but temporarly the aggregate will not be availbale as if it is not built on the info cube. No reporting is not possible on swtiched off aggregates. The definition of the aggregate is not deleted.
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.This aggregate will be having data from the previous load's. If the aggregate is switched off means it wont be available for reporting but data can be rolled up into it.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Later when you need those aggregate once again you have to create it from scratch.
Hope this helps.
Thanks,
JituK -
Is it all the data on the iphone is deleted when iphone is in Recovery Mode?
is it all the data on the iphone from the past is deleted when iphone is in Recovery Mode? or is there anyway i can manage the data from the past when my iphone is in Recovery Mode? or is it when my iphone is in Recovery Mode, all the data from the past is clear and its all fresh disk like the new iphone? is there anyway i can still acess the old data on iphone in recovery mode?
Depends. There is no supported method, from Apple, to exit recovery mode, other than restoring your phone. That, of course, means that all data on your phone gets erased. There are third-party utilities, like RecBoot, that claim to be able to get an iPhone in/out of recovery mode with the push of a button. You can search for these yourself.
-
Sales Area Data Cannot be Cleared after deletion
Hi All!
We are installing CRM 5.0 by following the SAP Best Practice. However, while creating organizational structure in CRM, we did not replicate the sales area data from R/3. Instead we created the org. structure manually in CRM. So we decided to delete the manually created org. units and download from R/3. Everything went fine until the point when we tried to assign the sales area data to a new BP (Organization). Every item in the list says 'Not found' but the new ones replicated from R/3 is not on the list.
It sounds to me that some buffer in CRM that contains the sales area data is not cleared. I ran the ABAP program 'HRBCI_ATTRIBUTE.....' but it didn't help.
Any sugguestion/advice?
Thanks,
LeonTry turning on buffering for Scenarion Sales in the table T77OMATTR. This should help solve you issue.
Regards,
Vimal -
Delete Sales Area Data in Account Management
Hello,
we are trying to delete data from Sales Are Data assignment block (BP_SALES/CorpAccountSalesOV) from acconts in WebUI.
For doing that we have activated the Delete button in method GET_OCA_T_TABLE of the enhanced class CL_BP_SALES_CORPACCOUNTSA_IMPL.
When clicking the Delete button the method EH_ONONE_CLICK_ACTION is processeing the DELETE event and the Sales Area Data line entry will disappear as expected from the table view in the assignment block.
But when saving the account the delete sales area entry will be available again.
So it is not deleted by the framework.
Do we have additional adjustments?
Thanks in advance,
AndréHi Veena,
cl_crm_bol_core->modify( ) is called by standard:
The DELETE event is handled by the standard method EH_ONONE_CLICK_ACTION
of the class CL_BP_SALES_CORPACCOUNTSA_IMPL (BP_SALES/CorpAccountSalesOV).
Line 59 of that method calls lr_core->modify( ).
Within that method CL_BUPA_IL_SALES_AREA->MODIFY is called.
Therein the standard is calling the FM CRM_BUPA_FRG*_DELETE but without
importing iv_x_save= X.
So a memory save on commit is not registered and the data will not delete from the database.
Best regards,
André -
Deletion of assigned sales area data
Hi *,
I am looking for a possibility to delete sales area data that were wrongly assigned to business partners. In our case the BPs were not uploaded to ECC yet.
Any ideas?
Kind regards
ThomasHi Thomas,
There's no easy way to do it. You have to adapt report from note 725857 to allow deletion of sales area for specific BP. You can get also more information on notes 1955713, 1906379.
Kind regards,
Bruno -
I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?
Start with B5/6 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems -
Sales area data is missing when Customer contact replicated to CRM
Dear Experts,
I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
Thanks & Regards
Boyz..Hello Shravanthi,
Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
Kind regards,
Johan Wigert -
How , When and What is the significance of Business Partner's Sales Area Data?
Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei VishnevskyHello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards -
Can I store only the aggregate data in OLAP cube
Hi All,
I know that the OLAP cubes store the leaf data and then builds the aggregate data on top of it and stores with in it. I have huge amounts of data ( like billions of data in my fact table and 6-8 dimension tables). If you keep the leaf data along with the agg data with in the cube would be too large to build.
So I am thinking to have to store only the agg data within the OLAP cube and for the leaf data it should still read from the Relational tables. Something like Hybrid OLAP.
(what I mean is
1. create the dimensions and cube in the AWM on 11g.
2. I will also specifiy the levels that I want the agg data to be calculated and stored in the OLAP cube.
(what I want is
1. I want to store only the agg data in the cube and leaf data still in the relatlional tables.
2. when I read the cube and drill down to the leaf level , it should fetch the leaf level data.
Is this possible in Oracle OLAP, if yes please provide some pointers
Thanks
SFirst you should try out storing and aggregating data to atleast see if the cube-loading time, query-time and AW-size is within acceptable limit or not. 11gOLAP especially 11gR2 OLAP is very efficient on all three fronts.
Regarding specifying levels, you can either use Cost-based-aggregation and pick the %age that should be pre-aggregated OR you can use Level-based-aggregation and pick the levels from each dimension that should be pre-aggregated.
Try these out before venturing into anything else. You will be surprised by the results. There are other ways to store the data in smaller multiple-cubes and joining those cubes through formulas. Make sure you don't mistake an attribute for a dimension.
Not sure what you mean by just storing aggregated data in olap cubes. You can just do a SUM .. GROUP BY .. of relational data before loading it into olap cubes. For example, if you source data is at DAY level, you can SUM.. GROUP BY .. at MONTH-level and then load month-level data into olap cubes where leaf-level is month-level.
The sql view (used by reporting tools) could then be a join between month-level "olap" data and "day-level" relational data. When you are drilling-down on the data, the sql view will pick up data from appropriate place.
One more thing. Drill-Thru to detail data is a functionality of reporting tools also. If you are using OBIEE or Discoverer Plus OLAP, then you can design the reports in a way that after you reach the olap leaf-level, then it will take the user to a relational detail-report.
These are all just quick suggestions (on a Friday evening). If possible, you should get Oracle OLAP Consulting Group help, who can come up with good design for all your reporting needs. -
Hi,
I added a info object to a dimension in a cube. now i want to delete the info object from the cube. But since the cube has data in it, i cannot do it unless i delete all the data from the cube. When i select 'delete data', i'm given 2 options, delete fact table only and 2nd option delete fact table and dimension table. what is the difference between the two and what option should i select.
i then need to load the cube back from ODS. the cude right now is setup in the proce4ss chain to do a delta load every day. would this be affected after i delete the data and load it again from the ODS?
Thanks
SameerThe way I understand your question is...
1) You have data in the cube from which you have to remove an infoobject
Ans: To acheive this, you have to delete the data from the cube
2) You have deleted the data and then deleted the IO, activated the cube and the update rules from the ODS which feeds this cube
3) Now you have to reload the deleted data from the ODS. But you already did an init and you are loading delta's from this ODS to the cube through process chain.
Ans: As you've already deleted the whole data from the cube, do a full load from the ODS (you can do this even when delta initialization is done) to your cube by creating a new infopackage under the export datasource of the ODS. This will capture all the records from the ODS. Then to be on the safe side so as not to load any duplicate records...go the infopackage that you've used to do the full load (you can even create a new Info package)...SCHEDULER -> Initilization options for source system -> Delete the existing INIT -> Then do Init again...
Leave the delta infopackage as is and let the process chain take care of the deltas from now on...
Hope this helps. Let me know I am missing something here...
Maybe you are looking for
-
Does anyone know how to use Retropect back soft ware - I need help with it
Is there anyone familiar with Retrospect Backup software here who might be able to help me with the following problem ? My 2007 iMac with the tiger 10.4.11 OS suddenly crashed exactly two weeks ago when I told the trash to empty. The reason was that
-
On my windows pc, I mistakenly deleted Applie Applications Support file. Any help with how to restore it?
-
What do I do to register into iTunes without a credit card?
I do not have a credit card. Then how do I redeem my card?
-
Reasons for not clearing GR/IR
Hi Gurus, There are certain transactions, which have not been cleared by executing t.code:f.13 Can any one specify why is this? What are the reasons? plz.
-
Crash Report: https://crash-stats.mozilla.com/report/index/bp-a97ab4a4-13be-4041-af12-12da02120711 Firefox 14 keeps crashing on random sites, even on the Firefox help pages: http://support.mozilla.org/en-US/kb/firefox-crashes-troubleshoot-prevent-and