Are data in third party applications saved during back up?

I'd like to upgrade to 2.0.1 but I have quite a few applications purchased from AppStore that contain crucial data. So the question is whether the information within the apps is saved during the back up or will update wipe out all the info forcing me to manually enter the data again?
Thanks

Yes, everything from SMS, contacts, settings, photos and applications and app data will be saved. The onlly thing not backed up is music but that also will be retained during the upgrade. Just make sure you have the same music already on your computer in case a problem does oocur.

Similar Messages

  • Submitting to third party application and post back creating refresh issue

    Hi,
    I am doing a web application in which I need to hit a third party application from a view and come back to the same view if the third party sends a response back.
    For this I am getting the adfCtrlState and submitting it as a postbackurl for the third party.
    After coming back to the same view from the third party, I need to go to the next activity in the taskflow without any user interaction.
    I am using the following code to find the next activity
    <af:commandButton text="AutoSubmit" id="cb2"
    action="processResponse"
    binding="#{pageFlowScope.responseBean.braodCastAction}"
    visible="false"/>
    In the responseBean : I am using the RichCommandButton to broadcast event
    RichCommandButton myEvent;
    public RichCommandButton getMyEvent(){
    if(conditions satisfied){
    myEvent.broadcast(new ActionEvent(myEvent));
    The above code is executing the action(processResponse) specified in the commandButton.
    But it is not able to find the next activity in the taskflow, if a hit F5(refresh) it is rendering the next view in the taskflow.
    My primary requirement is to execute or render the next method call activity or view after coming back from the third party application without user interaction. Is there any other way to go to the next activity without broadcasting the event ?*
    Thanks
    Mohan.

    Hi there
    I see some flaws with that.
    J41 wrote:
     It would act somewhat like an LMS where users could post their dev files on a network share.
    Dev files need to always be local. Placing on a network share for the purposes of using RoboHelp to compile or generate is risky business and may explode in your face. LMS to me means Learning Management System. Those are typically used for eLearning. RoboHelp does help systems. Captivate does eLearning. So you are losing me with your LMS reference.
    When ready to review with the customer, the would use the registration tool to push the project to preview.
    I'm lost. What "registration tool" are you even referring to here? Or is this what you are planning on creating and that's what you are choosing to call it?
    The app would call the RH command prompt using a server side technology, in my case .NET, and supply the necessary arguments and push the generated project to preview.
    There is no "preview" of projects. Preview of individual topics, sure. But not for a project. There is only compile or generate to create the final output.
    Once it had been reviewed and ready, then the user could push to production.
    Sounds like what one might typically accomplish using RoboHelp in a typical development cycle. You edit content on the local hard drive. If a review is needed, you compile or generate the content and place the output on a server. After approval is complete the content is then copied to the production server.
    Sure sounds like you are attempting to reinvent the wheel in many situations here.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Accessing Performance Data from third party Application

    I have a requirement where in I have to fetch the performance metrics from SAP through a Java application.  I know there are some RFC's available in CCMS module.  But the customer is not interested in CCMS module.
    So, is there any way to achieve it?
    If anyone had come across this situation, please let me know.
    Thanks in Advance,
    Vijay

    Hi vijay,
    IBM tivoli will work for IBM servers,please follow this link may be it will help full to you.
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/e704f8999a3ee8e10000000a1553f7/frameset.htm
    Regards,
    Raju.

  • How to clear documents and data for third party applications

    Anyone can help me how to clear the documents and data for apps like facebook , i tried to delete the app and re-install but there is no change , please advise ,
    thank you.

    Manage the data on the device via iTunes.

  • Third Party Applications for Frontrow.

    Hi Guys,
    Will Frontrow run RMVB files or MKV's ( For HD stuff and foreign language films ) Will a Mac play an SRT or SAA subtitle file or any other non-DVD subtitle file? Is there a VOB sub equvilent for the Mac?
    Are there any third party applications available for the Mac and Frontrow such as.. www.mymovies.dk for media center? Allowing you to view the DVD cover art, read profiles of the actors in the movies, find other movies in your collection with them starring in, watch trailers of the movies, sort by Genre, year, by whether you have watched it yet or not, by anything you want basically.
    Thanks for your help guys,

    Are there any third party applications available for the Mac and Frontrow...
    Apple has not released a "SDK" for Front Row (Software Development Kit). So, only Apple knows how to tie-in to the Front Row interface. This is a user-to-user forum, so none of us really know, but I doubt Apple will open Front Row for third party developers directly.
    There are other options for media players. You might take a look at .
    Allowing you to view the DVD cover art...
    Standard warning: It's against the Terms of Use of the Apple Discussions to post about ripping DVDs to your hard drive. With that said, the current version of Front Row will play VIDEO_TS folders if they live in your user's "Movies" folder (or there's an alias to their location inside your "Movies" folder). If you include a file called "preview.jpg" inside the VIDEO_TS folder, this image will be used by Front Row as the preview image.
    -Doug

  • Third Party Applications? What exactly are they?

    Right,
    I've read alot about the Blue Screen that appears when Upgrading to OSX Leopard. I am intending on upgrading tomorrow when my external hard drive arrives so I can Clone my 10.4.11 onto the external hard drive and upgrade the cloned version first but would like to know if I can check in advance for any of these' Third party App's'? and what exactly are they?
    Regards,

    A third party application is anything not made by Apple. It can also include products that Apple purchased fairly recently (some of those "Pro" apps) that weren't coded to Apple's specfications and haven't been well tested. Apple doesn't and shouldn't test their software with third party applications. It isn't their job to test other people's software. They probably make exceptions for things like Office and Photoshop, but that is a short list.
    Most third party applications will be fine. The ones you have to worry about are those that ask for your password when you install them. They can then install any sort of incompatible software.
    After you clone your hard drive, verify that you can boot from the external drive and all your data is there. If so, don't upgrade the external drive. Boot using the 10.5 DVD and immediately run Disk Utility and re-partition your internal hard drive to wipe it out completely. Then install Leopard. Do not use Migration Assistant. Re-install all your 3rd party applications that are 10.5 compatible. Be very careful about copying over from backup anything in a Library/Preferences folder. You can copy any preference file from a third party application back over - those are safe. Anything from Apple may have been upgraded. Only copy over the Apple files that you absolutely have to, such as your Mail folder and Address book file, for example.
    It sounds like a lot of work but it will only take a couple of hours.

  • Realtime data integration with Third party application

    A customer wants to send data to a third party application when a user modifies some information on a business object (ie PO Amount, Employee Name etc). How can you trap this change as close to realtime as possible within SAP?

    In addition to Senthil's reply, it may also be possible to hook into a workflow event, provided such an event is raised.  Whilst I prefer the change pointer approach outlined by Senthil, it does enforce a delay between the "application event" itself and change pointer processing.
    To see if a workflow event is raised, in a non-production system, use transaction SWU8 to activate the workflow trace.  Next perform the update that you wish to trap.  Finally, use transaction SWU9 to display the workflow log.  Hopefully you'll see a workflow event raised for your update (for example a CHANGED event).
    This will allow you to perform either synchronous or asynchronous processing immediately (the norm is for workflow processing to be triggered immediately but asychronously).
    It would be great if all SAP objects supported a common event model, with BADI's for standardised events for create, change, etc.  Maybe one day, but not today...
    Cheers,
    Scott

  • ITunes cant sync music. Third party applications can.

    So i posted a discussion ages ago about iTunes not being able to sync my music. I have tried 5 PC's with different Windows OS's and even some Mac Machines. Before iOS7 it worked fine, then the beta was used and it did not work since even having wiped the phone and used the public release.
    Anything that could narrow down the issue would be nice. It just syncs and sits on 'waiting for items to copy' and then just times out. Phone loses the whirling arrows and then iTunes gets stuck in 'Cancelling Sync' which it never does and needs force closing. Same exact issue on all PC's.
    MediaMonkey - Same music, same PC, same cable and same phone... Works fine. All 3800 songs.
    So my question to you all is, why can iTunes no longer sync my music yet third party applications can...? (they use the iTunes mobile device drivers)
    Trying to contact apple when outside of warranty is near impossible without paying. This was broken before my warranty expired but didnt have the time to go down. They also just removed my question for some reason so posting it again.

    ragerber wrote:
    Now that I've read all the documentation,
    Which people normally do before they do something but hey ho off we go
    I see that there is only one copy of backup data saved (for what possible reason????)
    Because the considered view is that you will be keeping regular backups of your computer in general which would keep these 'last backups' that way. Thats what Time Machine on the Mac does.
    So I'm hosed. iTunes not only deleted my apps (presumably an iTunes bug)
    Its not a bug - you deleted the content of the phone presumably.
    but I read on one forum where someone had re-synced and got his apps back.
    Correct, by following the instructions which instruct you to disable automatic synce before restoring to stop the autosync overwriting the last backup.
    I tried that and in the process it automatically deleted my good backup I guess.
    No, you didnt do it correctly, but don't panic. All free Apps can be downloaded again as can all purchased Apps as long as you log in with your original iTunes account. They will all come back just fine.
    This seems really like a really dumb way to do it, Apple.
    Not really - the instructions are quite explicit but reading them after the event or not at all is even dumber.
    Get downloading those Apps again

  • How do I disable auto-launch of third party applications (i.e. TeamViewer)  at startup?

    I've loaded a few third party applications like TeamViewer which installed themselves as startup applications which I cannot disable in the system preferences login items.  The obvious answer is don't load these apps but that being said, how do I disable them now that they are loaded without uninstalling to prevent them from launching automatically during startup.  I can quit them after they launch but I'd like to prevent them from auto-starting during startup.  Any insight would be appreciated.

    Look in TeamViewers preferences for this:
    Uncheck it.

  • My third party applications keep de-activating. How do I fix this?

    Hi everyone!
    I am wondering if anyone can be of help to me. I am desperate.
    I upgraded to Mavericks and am currently on version 10.9.5.
    I have numerous third party applications...to name the two important ones,
    most of them are video effects from New Blue FX and the other ones are just like converters etc.
    I have had no problems with them in the beginning when I upgraded to Mavericks and
    certainly no problems before Mavericks. Now all of a sudden, every time I try to use
    these applications, it keeps saying that I am running on trial version and that I need
    to activate the product with the activation code. This has never happened before and
    it certainly has not got to do with a certain app as it is happening with all my applications
    that require an activation code. I have to keep activating the apps everyday so that I can
    use them and it is becoming really annoying and I don't know how to fix this.
    I am sure it is something simple as my computer has been absolutely GREAT since
    I have updated to Mavericks. Everything has been so much faster and just amazing until
    this new problem. This is the only problem I have. I have checked and I have done ALL updates.
    I am a video editor and I use Adobe Premiere Pro CS6 and these continuous activations are
    really not helpful for me when I am trying to concentrate and use my effects.
    But like I said, it cannot be just the effects I use for adobe as applications that
    are not associated to adobe at all are being affected as well.
    If you guys could help me, it would be greatly appreciated!
    I am really desperate! By the way, I am working on an iMac with Mac OSX Mavericks 10.9.5.
    Thank you so much!
    Jess

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • ALL third-party applications crash upon save, open, or save as

    Okay everyone, this is an odd one.
    I recently installed photoshop CS6.  However, when I try to save my documents in CS6, CS6 freezes, then crashes without an error report.  The same thing happens if I try to open or 'save as' a document.  However, if the document was created in Gimp, I can right-click the image in finder, click 'open with' Photoshop, and then something weird happens - File>open still doesnt work (but I don't need it to, as I've opened the image I need) File>save as still crashes - but File>save and Command-S work fine.
    I've spent the last few weeks searching for an answer on the adobe forums and found nothing that has solved my problem.  And then, something else happened.
    Today I installed Python 3.3.  Brand new, fresh installation.  Started up my IDLE and typed in some code, then hit command-S.
    The same thing happened - Python 3.3 froze, then crashed, also without an error report.  The exact same symtoms.
    This got me thinking, so I opened up Openoffice 4.  This had been installed on my mac by my school's ICT services, and had never been opened before - a fresh installation.  Once again, saving a document in openoffice 4 also caused it to freeze, then crash.
    So, I took my mac into the ICT department and got them to have a look at it.  They recommended repairing my disc permissions - which I did - and then, if that didn't work, reinstalling Maveriks.
    I'm currently typing this on my mac, having spent the last 3 hours downloading and installing a fresh copy of Maveriks, and still I have the same problem.  Any third-party applications freeze and crash when I try to save.
    As I am the only user of my computer, I always run applications from an administratior account.  Creating a new admin account hasn't helped.
    All of these applications work when I'm running in safe mode.
    My educated guess is that it's something to do with finder.
    Whenever photoshop CS6 crashes, it's when a finder window should appear - for example, so I can choose a name for my new document, or select a document to open.  But if the image was opened with finder's right-click, open with Photoshop, then CS6 doesnt have to open a finder window.  If the image has already been created, CS6 doesnt have to open a finder window when I hit Command-S.
    But I have no clue how to fix it.
    This guy (https://discussions.apple.com/message/16595546#16595546) seems to have a similar problem to me, and he fixed it by moving all his items off his desktop.  I've done that, but the problem persists.
    Adobe (http://helpx.adobe.com/x-productkb/global/crash-using-open-save-dialog-mac.html) suggests that my viewing options in finder could be the problem.  I've tried the solution described in the article above, and the problem persists.
    Please, I need to be able to use Python and CS6 for my schoolwork!  Help me if you can!
    Help me, (your name here), you're my only hope!
    Message was edited by: Hyperbion

    Hello Rick,
    Through all the research I have done so far and talking with a few other coworkers what the common issues that cause this are is:
    1. Antivirus: disabling the antivirus is not good enough it needs to be totaly uninstalled and retested.
    2. startup programs: these need to be disabled through either Safe mode with networking or the start menu or MSconfig.
    3. Office addins: Disable all of them see if that helps. Then turn them back on one by one to see which addin is causing the issue.
    To disable addins: 1. open up regedit and navigate to this key. HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Addins and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins
    Then change the LoadBehavior to 0 this will disable the addin. 3 lets it run. Since this affected only one user HKEY_LOCAL_USER might be your best bet but don't rule out the other location.
    To verify there are no addins running go to the File tab>options>Add-Ins make sure nothing is listed under Active Application Add-ins.
    I hope this helps
    Thanks,
    Paul Slaathaug Sr. Support Engineer - Microsoft Word

  • Third party applications don`t work!!!!!!

    Hi I really need help here I have a bb 9530 verizon(my uncle`s) cause my last phone broke a bb 9300 3G.i have set up the bb but I really don't know what I'm doing so every thing works fine except third party applications because when ever I go into a third party app for e.g... whatsapp it comes up with a message : <app name> has attempted to connect to a location inside the firewall and outside the firewall which is not allowed by your  IT policy. and after saying OK I get another message: unable to open folder.java.lang.SecurityException: Permission denied  that always happens!!!! Please help me I'm really getting tired of this.P.S I don't know much about where the phone came from(country)and I'm in south Africa and on mtn and I don`t know about the previous settings or any of that all I know is the model and that its my uncles so please help.
    Regards:fruityboy78

    Hi and Welcome to the Community!
    What you have is a BB that was previously associated with a corporate/BES system, and the IT Policy that was placed onto the device by BES was never properly cleansed, even though the BB was removed from the BES system (cleansing the BB is NOT an automatic function). Until that is gone from the BB, you will have this problem.
    The other problem you have is that the only remedy will totally wipe your BB clean of everything -- data, apps, configurations, etc. It will be as if it was brand new again, fresh from the factory. The problem here is that, from what you say, you probably don't know the first thing about what you need to do in order to proper re-configure after you cleanse the IT Policy off of the BB. So doing so could render your BB useless since you don't know any of the settings you would need to accomplish this task.
    All in all, what you need to do is a rather complex set of things, requiring you to know what you are doing, and know the necessary configuration items in order to get your BB working again. If you are willing to undertake that mess, then we can give you the necessary procedure...if you are not willing, then you likely should seek out some paid support from someone who does know what they are doing and can perform the necessary steps for you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • RE: Tab Groups. 1. What will erase saved tab groups unintentionally? E.g. : Clearing Cashe, running CCleaner? 2. Does keeping a large number of tab groups active degrade my computer's performance? 3. Are tab groups saved during back-ups?

    RE: Tab Groups.
    1. What will erase saved tab groups unintentionally? E.g. : Clearing Cache, running CCleaner, other actions?
    2. Does keeping a large number of tab groups active degrade my computer's performance?
    3. Are tab groups saved during back-ups?
    Running Win 7 Pro, browsing Firefox 7.0.1

    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the Firefox profile folder.
    Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    * https://support.mozilla.com/kb/Clear+Recent+History
    If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

  • Migrating third-party applications from 4.x to 5.x

    Hi all.
    My customer wants to migrate its CUCM 4.1.3 to 5.1.3. He has some third-party applications that read CDR's and process the information. I've heard that in version 5.x it's not possible to directly access to CDR in order to obtain the required data but you have to use the CAR tool. Is this true? Or you can use Informix commands via a third-party application to access the information at CDR's?
    Thanks for your help.

    The CDR records are stored in flat files and then FTPd or SFTPd to your choice of up to 3 billing servers.If you upgrade from Cisco Unified CallManager 4.x, Cisco Unified CallManager saves the CDRs in the CAR database to CSV files. The Data Migration Tool uses these CSV files to upgrade the CAR database. The system stores the CSV files in /common/download/windows/car. The system stores the pregenerated reports in /common/download/windows/pregenerated.
    Because Cisco Unified CallManager 5.x does not use a CDR database to store CDR records as in previous releases, the CDR data does not migrate to the Cisco Unified CallManager 5.x system.
    http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/service/serv504/car/carovrvw.htm#wp1102412

  • Oracle Quality Itegration with Third party application

    We are trying to build the interface between EBS Oracle quality and third party application for Non conformances and dispositions.  Currently there is no business events or public APIs available for publishing  quality data out from EBS to third party. Please suggest the latest trends available for Integration of quality with external application using service base integration.

    Hello Sandeep,
    have you looked at these docs for Fusion Apps Financials / ERP Cloud?
    - Implementing Tax -- http://docs.oracle.com/cloud/latest/financialscs_gs/FAITX/toc.htm
    - Using Tax -- http://docs.oracle.com/cloud/latest/financialscs_gs/FAUTX/toc.htm
    The "Implementing Tax" contains a chapter about integrations with 3rd party providers. Is this what you are looking for?  If not, could you clarify what you mean by "integration with 3rd party applications"?
    Thanks,
    Oliver
    Fusion Apps Developer Relations
    https://blogs.oracle.com/fadevrel

Maybe you are looking for